GitHub
server ทางการของ GitHub ให้ AI อ่านและจัดการโค้ด issue และ pull request ในบัญชีของคุณได้ ใช้ผ่านคลาวด์ของ GitHub หรือรันในเครื่องด้วย Docker ก็ได้
คำอธิบายจากผู้ทำ (ภาษาอังกฤษตามต้นฉบับ)
Specs of FPV drone parts and every Betaflight/INAV CLI setting by release; checks a pasted diff
สามเรื่องนี้ไม่รวมเป็นคะแนนเดียว เพราะความเห็น การวัด และความนิยม เป็นคนละเรื่องกัน
ตัวนี้ยังไม่ได้เรียบเรียงเป็นภาษาไทย ด้านล่างคือข้อเท็จจริงที่เราอ่านจาก registry
เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง
ต้องเตรียมก่อน
คุณใช้แอปไหน
เลือกแอปด้านบน เราจำไว้ให้ ครั้งหน้าปุ่มจะขึ้นว่า “ติดตั้งลง …”
ใช้ได้ทั้ง Claude บนเว็บ แอปคอมพิวเตอร์ และมือถือ:
https://fpv-db.com/mcpพิมพ์คำสั่งนี้ใน Terminal
claude mcp add --transport http fpv-db https://fpv-db.com/mcpวางในไฟล์ .cursor/mcp.json ของโปรเจกต์ หรือ ~/.cursor/mcp.json
{
"mcpServers": {
"fpv-db": {
"url": "https://fpv-db.com/mcp"
}
}
}เบราว์เซอร์จะถามก่อนเปิดแอป จากนั้นแอปแสดงค่าตั้งให้ตรวจแล้วกดยืนยัน ช่อง key เว้นว่างไว้ให้คุณใส่เอง
วางในไฟล์ .vscode/mcp.json ของโปรเจกต์
{
"servers": {
"fpv-db": {
"type": "http",
"url": "https://fpv-db.com/mcp"
}
}
}เบราว์เซอร์จะถามก่อนเปิดแอป จากนั้นแอปแสดงค่าตั้งให้ตรวจแล้วกดยืนยัน ช่อง key เว้นว่างไว้ให้คุณใส่เอง
ChatGPT ต่อได้เฉพาะ server ที่อยู่บนอินเทอร์เน็ต:
https://fpv-db.com/mcpชื่อเมนูอาจต่างกันเล็กน้อยตามแพ็กเกจและรุ่นของแอป
ตัวเลือกเก็บในคุกกี้บนเครื่องนี้ ไม่ต้องมีบัญชี
ค่าตั้งนี้สร้างจากข้อมูลใน registry ของผู้ทำ ถ้าไม่ตรงกับ README ให้เชื่อ README
ชื่อและคำอธิบายเครื่องมือตามที่ server ตอบมาเมื่อ 9 พ.ย. 2569 ผู้ทำเป็นคนเขียน ไม่ใช่เรา แสดงเป็นข้อความล้วน
fw_paramOne CLI setting of a firmware release: type, allowed range or values, firmware default (with no board config), the source line (settings.c or settings.yaml), and its history across releases (renames, range and default changes). Old names are followed through sourced renames.
fw_diffWhat changed in the CLI settings between two releases: added, removed, renamed (only sourced renames) and changed (range, values, default) settings.
fw_check_cliChecks a pasted `diff all` / `dump` against a release: every `set` line whose setting does not exist, was renamed or removed, or whose value is out of range or not in the value list, plus lines that only repeat the firmware default. The release of the paste is read from its `# Be
part_specsThe full spec sheet of one part by its slug (the last segment of its fpv-db.com URL, e.g. iflight-xing2-2207 for /motors/iflight-xing2-2207/): specs, bench thrust table where measured, VTX table where published, the sources the specs were verified against, and caveats.
search_partsFinds published parts of one type by spec. `filters` maps a spec field to a number (equals, or any element of a list), a string (case-insensitive substring) or {min, max} (numeric range). `query` matches brand and model. An unknown field returns the type's field list. Example: ty
เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 10 พ.ย. 2569
ชื่อใน registry ยืนยันโดเมน fpv-db.com แล้ว (registry ตรวจความเป็นเจ้าของโดเมน)
ยังไม่ได้อ่านข้อมูล repo จาก GitHub
ยังไม่ได้อ่านข้อมูล repo จาก GitHub
ตอบกลับใน 88 ms (HTTP 200)
ไม่ต้องล็อกอิน
อ่านคำอธิบายเครื่องมือ 5 ตัวแล้ว ไม่พบคำสั่งแอบแฝงถึง AI
เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo
จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น
registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก
รันบนคลาวด์ของผู้ทำ ต่อผ่านอินเทอร์เน็ตได้เลย ไม่ต้องลงโปรแกรม แต่ข้อมูลที่ส่งให้จะผ่านเซิร์ฟเวอร์ของผู้ทำ
repo บน GitHub มีการแก้โค้ดล่าสุด – และส่งรุ่นล่าสุด (1.0.2) เข้า registry เมื่อวานซืน
โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code ตัวนี้ต่อผ่าน URL จึงใช้กับโปรแกรมที่รับ remote MCP ได้ เช่น ChatGPT ที่เปิดโหมดนักพัฒนา
ในหมวดเดียวกันมี GitHub, Desktop Commander, Cloudflare MCP
server หมวดเดียวกันจากผู้ทำคนอื่น เรียงตามดาว
อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi
server ทางการของ GitHub ให้ AI อ่านและจัดการโค้ด issue และ pull request ในบัญชีของคุณได้ ใช้ผ่านคลาวด์ของ GitHub หรือรันในเครื่องด้วย Docker ก็ได้
MCP server for terminal commands, file operations, and process management
ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ
Source of the FPV-DB MCP server, live at `https://fpv-db.com/mcp`: specs of FPV drone parts and every Betaflight / INAV CLI setting by release. Streamable HTTP, stateless JSON-RPC, read only, no API key. Listed in the official MCP Registry as com.fpv-db/fpv-db.
Any MCP client that speaks Streamable HTTP, for example:
{ "mcpServers": { "fpv-db": { "type": "http", "url": "https://fpv-db.com/mcp" } } }
| Tool | What it answers |
|---|---|
fw_param | One CLI setting of a firmware release: type, range or values, default, the source line it comes from, and its history across releases (sourced renames followed). |
fw_diff | What changed in the CLI settings between two releases: added, removed, renamed, changed range/values/default. |
fw_check_cli | Checks a pasted diff all / dump: settings that do not exist, were renamed or removed, values out of range, lines that only repeat the default. The release is read from the paste's header. |
part_specs | Full spec sheet of one part by slug: specs, bench thrust table, VTX table, sources and caveats. |
search_parts | Published parts of one type filtered by spec, e.g. type=motor, filters={"stator": "2207", "weight_g": {"max": 33}}. |
functions/mcp.js is a Cloudflare Pages Function deployed with the static site. It computes nothing the site build has not already written: every answer is a lookup in JSON files served next to the pages (/firmware/ /history.json, /firmware/ /diff/ .. .json, /data/mcp/ .json), read through the ASSETS binding. No SDK, no dependencies.
The only state is an optional call counter in D1 (MCP_DB binding, schema.sql): one row per day, tool and client name. No IPs, no arguments.
This repository mirrors the deployed file; changes land on the site first and are copied here by the site's daily refresh.
Corrections to a spec: open an issue with the maker's page that shows it.