Ampworth

What you can do with it

We have not written a plain-language summary for this one yet. Below are the facts we read from the registry.

• Connection: Runs in the cloud
• Transport: Streamable HTTP
• Category: Other

Install

Pick the AI app you use, then copy the settings.

You need

• Runs in the cloudNothing to install; it connects over the internet

Which app do you use?

https://ampworth.com/mcp

claude mcp add --transport http ampworth https://ampworth.com/mcp

{
  "mcpServers": {
    "ampworth": {
      "url": "https://ampworth.com/mcp"
    }
  }
}

{
  "servers": {
    "ampworth": {
      "type": "http",
      "url": "https://ampworth.com/mcp"
    }
  }
}

https://ampworth.com/mcp

Your choice stays on this device in a cookie; no account needed.

These settings are generated from the maker’s registry entry. If the README says otherwise, follow the README.

What it can do

Tool names and descriptions exactly as the server reported them on Nov 7, 2026. The maker wrote them, not us; we show them as plain text.

• connection_route

  Work out which ENA connection procedure a domestic installation of solar panels, batteries or both falls under: connect first and notify the distribution network operator within 28 days, or apply and wait for approval before anything is connected. The rules are the ENA's engineer

• get_document

  Fetch the full text of one guide, article or set of questions by its slug, as Markdown, not HTML. Slugs come from search_documents or list_documents. The answer carries the MCS documents the text draws on, and the ids of any calculators on this site that do the arithmetic the tex

• heat_pump_noise

  Calculate the sound pressure level an air source heat pump produces at an assessment position, and whether it meets the 37 dB(A) permitted development noise limit, using the method in MCS 020. The formula is Lp = Lw + 10 log(Q / 4.pi.r^2) - Ab. Lw is the A-weighted sound POWER le

• heat_pump_running_cost

  Compare what a household spends heating on its current fuel with what the same heat would cost from a heat pump. The heat demand is worked out from the household's own metered fuel use, not from a model, because a year of bills describes a particular house far better than any est

• heat_pump_size

  Estimate the heat pump a UK house needs, and what it would cost to run against the fuel it burns now. IMPORTANT: MIS 3005-D requires a heat pump to be sized from a room-by-room heat loss calculation to BS EN 12831, and nothing here replaces that. Say so whenever you report a resu

• hot_water_cylinder

  Work out the daily hot water demand of a dwelling and the size of cylinder a heat pump needs, using the formula in MIS 3005-D 3.5.2 and the BS 6700 guidance reproduced in MGD 007. The demand is 45 litres a day for each of N, where N is the greater of the number of bedrooms plus o

• list_calculators

  Lists every calculator on this server, with the standard behind it and whether it is the whole-system sizing calculator or one of the single-method ones, plus the reference data a caller needs to build a valid request: the compass directions and their orientations, the shading de

• list_documents

  Lists every document, optionally filtered by kind ('guide', 'article' or 'faq'), by category, or, for guides, by the reader they are written for. Guides are shelved by perspective: 'considering', 'buying', 'selling', 'installing' and 'learning'. The first four are plain language

• radiator_flow_temperature

  Work out the flow temperature a heat pump must produce to heat a room through a given radiator, and the resulting MCS Heat Emitter Guide star rating, following section 4 of MGD 007. This is the calculation that decides whether a heat pump will be cheap or expensive to run. A heat

• room_heat_loss

  Calculate the design heat loss of a single room in watts, following BS EN 12831 as MIS 3005-D applies it. This is the figure a heat pump is sized from and the figure the radiator in that room must be able to deliver. BS EN 12831 is a room-by-room method. Run this once for each he

• search_documents

  Search the guides, articles and questions for material on a UK home energy subject. Use this first, before answering from memory, whenever a question concerns UK heat pump or solar PV practice: how a system is sized, what a standard requires, what a quotation should contain, what

• solar_pv_output

  Estimate the annual AC electricity output of a UK solar photovoltaic system, in kWh, using the standard estimation method that MIS 3002 requires every MCS certified installer to use. The method is: annual output = kWp x Kk x SF, where Kk is read from the MCS irradiance dataset fo

• solar_pv_self_consumption

  Estimate what proportion of a domestic solar PV system's annual output is consumed in the house and what proportion is exported, using the lookup tables in MGD 003. The tables are not a model. They come from half-hourly monitoring of real British households by Loughborough Univer

• solar_pv_shading

  Convert a completed MCS sunpath shading assessment into a shade factor, using the procedure in MGD 005. The MCS sunpath chart is divided into 84 segments, each worth one per cent of the year's useful irradiance. An assessor stands at the middle of where the array will go, plots w

• solar_pv_system_size

  Work out the solar PV system a UK home needs: the capacity in kWp, the number of panels, the battery to go with it, and what it would do to the electricity bill. This runs the MCS arithmetic backwards. The other solar calculators here each answer one question about a system someb

Basic checksi

We check information anyone can see; we have not read the code. Checks that do not apply are left out of the count. · Checked Nov 9, 2026

• ! Caution

  Maker matches the repo

  The registry lists no source repo, so we cannot match the publisher (ampworth.com) to the code

• … Not checked yet

  Still maintained

  We have not read this repo from GitHub yet

• … Not checked yet

  Has a licence

  We have not read this repo from GitHub yet

• ✓ Pass

  Endpoint responds

  Responded in 706 ms (HTTP 200)

• – Not applicable

  Sign-in with OAuth

  No sign-in needed

• ✓ Pass

  No hidden instructions in tool descriptions

  Read 15 tool descriptions and found no hidden instructions to the AI

Compared with others in Otheri

• More stars than 0% of the other 18902 servers in this category
• Published to the registry more recently than 65% of the other 18902 servers in this category
• Basic checks equal to or better than 37% of the other 18902 servers in this category

Compared with every active server in this category in the registry. Stars count only when the publisher owns the repo.

Alternatives

Servers in the same category from other makers, sorted by stars.

Reading a card:↓ Downloads per weeki★ GitHub starsiThree pillars: reviews · checks · usageiUpdated = latest version published to the registryi

README from the maker

No README found in the repo