Dive Kit

What you can do with it

We have not written a plain-language summary for this one yet. Below are the facts we read from the registry.

• Connection: Runs in the cloud
• Transport: Streamable HTTP
• Category: Other

Install

Pick the AI app you use, then copy the settings.

You need

• Runs in the cloudNothing to install; it connects over the internet

Which app do you use?

https://api.divekit.app/mcp

claude mcp add --transport http divekit https://api.divekit.app/mcp

{
  "mcpServers": {
    "divekit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}

{
  "servers": {
    "divekit": {
      "type": "http",
      "url": "https://api.divekit.app/mcp"
    }
  }
}

https://api.divekit.app/mcp

Your choice stays on this device in a cookie; no account needed.

These settings are generated from the maker’s registry entry. If the README says otherwise, follow the README.

What it can do

Tool names and descriptions exactly as the server reported them on Nov 6, 2026. The maker wrote them, not us; we show them as plain text.

• plan_dive

  Computes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, contingencies, CCR bailout and a Dive Kit share link. Defaults u

• find_max_bottom_time

  Finds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that needs no stop (limit no_deco). Use this when a diver asks how l

• check_no_deco

  Use this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD at 1.4 bar, a safety-stop reminder and a Dive Kit share link

• read_share_link

  Decodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requested units. Use this when a diver pastes a Dive Kit link and wa

• gas_specs

  Returns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivalent narcotic depth (END), equivalent air depth (EAD) and gas density. Use this when the diver asks wh

• best_mix

  Use this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (default 30 m, 98 ft), the nearest standard fill inside the same limits, and the standard deco gas ladde

• get_guide

  Returns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs: workflow, tool chains, every input with unit, default and range (inputs_reference), deco theory, gra

• lookup_cylinders

  Returns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight, buoyancy and brands. Each row gives the plan_dive cylinder fields (a preset or cylinder_size) that d

• lookup_certifications

  Returns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and links. Use this when a diver asks what a course allows ("what does PADI Tec 45 let me do"), what they ne

• convert_units

  Converts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar/min, psi/min). Use this when a diver gives a figure in the other unit system or asks what it reads

• gas_usage

  Returns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, the turn pressure and the first segment that drops below each. Use this when a diver asks whether a c

• mix_result

  Returns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and pressure. Use this when a diver or blender asks what a fill produced ("50 bar of air, 40 bar of oxyg

• plan_blend

  Returns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix after each step, the cooling step, the mix achieved, the gas drawn from each bank and alternative p

• blend_continuous

  Returns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection and at the end, and the pressure to bleed to first when the cylinder's gas is in the way. Use this w

• decant

  Returns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a target mix it also returns where to close the valve, the mix the receiver reaches and what the donor

• rmv_sac

  Returns the gas consumption rate computed from a logged dive's cylinder pressures: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), overall and per segment. Use this when a diver gives start and end pressures and

• buoyancy_check

  Returns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and the end (near-empty cylinders at 3 m), what a flooded drysuit, a failed wing or a dropped stage would

• lookup_references

  Returns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, physiology, gas limits, blending practice, standards or training, so the answer names its source. Not f

Basic checksi

We check information anyone can see; we have not read the code. Checks that do not apply are left out of the count. · Checked Nov 8, 2026

• ! Caution

  Maker matches the repo

  The registry lists no source repo, so we cannot match the publisher (divekit.app) to the code

• … Not checked yet

  Still maintained

  We have not read this repo from GitHub yet

• … Not checked yet

  Has a licence

  We have not read this repo from GitHub yet

• ✓ Pass

  Endpoint responds

  Responded in 746 ms (HTTP 200)

• – Not applicable

  Sign-in with OAuth

  No sign-in needed

• ✓ Pass

  No hidden instructions in tool descriptions

  Read 18 tool descriptions and found no hidden instructions to the AI

Compared with others in Otheri

• More stars than 0% of the other 18513 servers in this category
• Published to the registry more recently than 85% of the other 18513 servers in this category
• Basic checks equal to or better than 36% of the other 18513 servers in this category

Compared with every active server in this category in the registry. Stars count only when the publisher owns the repo.

Alternatives

Servers in the same category from other makers, sorted by stars.

Reading a card:↓ Downloads per weeki★ GitHub starsiThree pillars: reviews · checks · usageiUpdated = latest version published to the registryi

README from the maker

No README found in the repo