Prototype · Preview: every server in the official registry, synced every 30 minutes. Reviews and accounts come in a later step.
PopNx MCPMCP servers for people who use AI · explained in plain words

ZenSched

by zensched.comversion 1.0.0i★ –iRuns in the cloud
Registry namecom.zensched/zensched

Install

Overview

Description from the maker (original English)

Field workforce scheduling for AI agents. GPS punches, forms, timesheets. No dashboard.

PopNx MCP’s three pillars

These three are never merged into one score: opinions, measurements and popularity are different things.

What you can do with it

We have not written a plain-language summary for this one yet. Below are the facts we read from the registry.

  • Connection: Runs in the cloud
  • Transport: Streamable HTTP
  • Category: Docs, sheets & office work
  • You need to fill in: Authorization

Install

Pick the AI app you use, then copy the settings.

Before you install

Values marked secret are keys to your account. Never share them or paste them into a chat.

You need

Which app do you use?

Pick your app above. We remember it, so next time the button says “Install in …”.

This address needs a key in a request header, which the add-connector menu cannot set. Use Claude Code, Cursor or VS Code instead.

Run this in your terminal

claude mcp add --transport http zensched https://mcp.zensched.com/mcp --header 'Authorization: your-value'

Fill in the empty values before running it.

Open in Cursor

Or copy the settings yourself

Paste into .cursor/mcp.json in your project, or ~/.cursor/mcp.json

{
  "mcpServers": {
    "zensched": {
      "url": "https://mcp.zensched.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

Your browser asks to open the app, then the app shows the settings and asks you to confirm. Key values are left empty for you to fill in.

Open in VS Code

Or copy the settings yourself

Paste into .vscode/mcp.json in your project

{
  "servers": {
    "zensched": {
      "type": "http",
      "url": "https://mcp.zensched.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

Your browser asks to open the app, then the app shows the settings and asks you to confirm. Key values are left empty for you to fill in.

This address needs a key in a request header, which the add-connector menu cannot set. Use Claude Code, Cursor or VS Code instead.

Your choice stays on this device in a cookie; no account needed.

Values you fill in

  • Authorization secret required HTTP header
    API key as Bearer zsc_... Get a key at https://www.zensched.com/pricing/

These settings are generated from the maker’s registry entry. If the README says otherwise, follow the README.

What it can do

Tool names and descriptions exactly as the server reported them on Nov 9, 2026. The maker wrote them, not us; we show them as plain text.

  • zensched_guide

    START HERE. The ZenSched agent guide: how to Connect (Claude.ai) or use a zsc_ key, then fund → locations → workers → shifts → timesheets. Also covers the suggestion box (feedback_submit).

  • feedback_submit

    File a grievance or product recommendation. Free. Works even before you have an account. Categories: bug, friction, missing_capability, docs, billing, feature, other. Severity: low, medium, high, blocker. Include related_tool and paste error text in context when reporting a bug.

  • account_create

    Create a ZenSched org without email (MCP-only agents). No OTP — returns org_id + zsc_ key immediately. Store the key securely. To attach a contact email later for human recovery, call account_set_contact. Rate-limited aggressively.

  • account_signup_start

    Create a ZenSched org (step 1 of 2): sends a 6-digit verification code to the email. Unauthenticated; rate-limited. Then call account_signup_verify.

  • account_signup_verify

    Create a ZenSched org (step 2 of 2): verify the emailed code. Returns org_id and your zsc_ API key (shown once). Claude.ai must then Connect → Sign in with the same email — do not keep calling org tools until Connect succeeds.

  • account_recover_start

    Lost API key (step 1 of 2): sends a verification code to the org owner email. Then call account_recover_verify. Prefer account_signin_start if you only need to reconnect — Recover revokes ALL keys.

  • account_recover_verify

    Lost API key (step 2 of 2): verify the code. Issues a fresh key and revokes ALL previous keys.

  • account_signin_start

    Reconnect an existing org without rotating keys (step 1 of 2): emails a 6-digit code to the owner. Then account_signin_verify. Prefer this over Recover.

  • account_signin_verify

    Reconnect an existing org without rotating keys (step 2 of 2): verify the emailed code. Call this after account_signin_start. If later org tools fail, call account_signin_verify again or account_use_key.

  • account_use_key

    Authenticate this connector with an existing zsc_ API key. Prefer this when the key is already in the conversation. If the connector shows Connected but org tools fail, call this or account_signin_start — do not look for a Connect button.

  • account_auth_status

    Check whether this connector is signed in as a ZenSched org. Call this before account_get in a new session. Unauthenticated; never errors.

Basic checksi

We check information anyone can see; we have not read the code. Checks that do not apply are left out of the count. · Checked Nov 10, 2026

  • ! Caution

    Maker matches the repo

    The registry lists no source repo, so we cannot match the publisher (zensched.com) to the code

  • … Not checked yet

    Still maintained

    We have not read this repo from GitHub yet

  • … Not checked yet

    Has a licence

    We have not read this repo from GitHub yet

  • ✓ Pass

    Endpoint responds

    Responded in 317 ms (HTTP 200)

  • – Not applicable

    Sign-in with OAuth

    No sign-in needed

  • ✓ Pass

    No hidden instructions in tool descriptions

    Read 11 tool descriptions and found no hidden instructions to the AI

Compared with others in Docs, sheets & office worki

  • More stars than 0% of the other 3674 servers in this category
  • Published to the registry more recently than 30% of the other 3674 servers in this category
  • Basic checks equal to or better than 41% of the other 3674 servers in this category

Compared with every active server in this category in the registry. Stars count only when the publisher owns the repo.

Common questions

Is ZenSched safe?

It passed 2 of 3 applicable basic checks. We have not read the code. Before adding a key or token, see what access the server asks for and use a key with only the permissions you need.

What keys or codes does it need?

You need to fill in: Authorization

Does it run on my computer or in the cloud?

It runs in the maker’s cloud. Connect over the internet with nothing to install, but what you send passes through the maker’s servers.

Is it still maintained?

The GitHub repo last changed –, and the latest version (1.0.0) reached the registry 2 months ago.

Which apps can use it?

Apps that support MCP, such as Claude Desktop, Claude Code, Cursor and VS Code. It connects by URL, so apps that accept remote MCP servers work too, such as ChatGPT in developer mode.

What can I use instead?

In the same category: Agent-Native Calendar, Excel MCP Server, MCP Server for Excel

Alternatives

Servers in the same category from other makers, sorted by stars.

Reading a card:↓ Downloads per weeki★ GitHub starsiThree pillars: reviews · checks · usageiUpdated = latest version published to the registryi

Agent-Native Calendar

Agent-Native Google Calendar - manage events, sync, and public booking

by BuilderIOGrowing★ 7.6KUpdated 2 months ago

Runs in the cloud

Excel MCP Server

Lets AI create and edit Excel files itself, including formulas, charts and PivotTables, without Excel installed.

by haris-musaWidely used↓ 49.6K/wk★ 4.3KUpdated today

Runs on your computer

MCP Server for Excel

Excel automation for AI - Sheets, Power Query, DAX, VBA, Tables, Ranges and more. Windows only.

by sbroenneGrowing↓ 4.3K/wk★ 847Updated 7 days ago

Runs on your computer

README from the maker

No README found in the repo

Ask PopNx