Picodev Lab

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

• 接続方法: クラウドで動く
• トランスポート: Streamable HTTP
• カテゴリ: ウェブ・ブラウザ

インストール

使っているAIアプリを選んで、設定をコピーしてください。

必要なもの

• クラウドで動くインストール不要。インターネット経由でつながります

どのアプリを使っていますか？

https://lab.picodev.fr/mcp

claude mcp add --transport http picodev-lab https://lab.picodev.fr/mcp

{
  "mcpServers": {
    "picodev-lab": {
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}

{
  "servers": {
    "picodev-lab": {
      "type": "http",
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}

https://lab.picodev.fr/mcp

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

• decode_capture

  Decode a ready logic capture of the session (browser or bench). protocol "uart" with channels {rx} and options {baud (300-1000000, 9600), bits (5-9, 8), parity (none, even, odd), stop (1, 2), invert (false)}; "spi" with {sck, mosi?, miso?, cs?} (one data pin at least) and options

• list_setups

  The setups: status available (open_session works) or soon (listed, cannot be opened yet), their modes (free, challenge) and their benches by kind (status open, or soon: not offered yet).

• open_session

  Create a session (mode: free or challenge). Give open_url to the human: nothing simulates until they open it in their browser.

• push_to_editor

  Replace the code in the human's browser and, if run, compile it in the lab's cloud and start it. The fallback of push_program: use it only when the toolchain to compile locally is missing (no arduino-cli, core or library).

• push_program

  Send a program compiled on the visitor's machine (Intel HEX text, 48 KiB at most, e.g. arduino-cli's .ino.hex) to the human's browser, which loads it in the simulator without compiling and, if run, starts it. files: the sources, shown read-only in the editor, never compiled. Duri

• read_simulation

  Last state (with circuit, the browser's components and wires), last compilation and the events after since_ms (2000 at most). `serial` is the full serial output of the current run (up to 16 KiB), reset at each compile and NOT starved by pin events: prefer it over reconstructing s

• set_visibility

  Change the visibility (private, link, public). Returns the viewer link; current viewers are disconnected.

• queue_join

  Take a place in the queue for benches of this kind (for example real or sim). The browser must be connected.

• queue_status

  The session's place: state none, waiting (position, estimated wait eta_s) or turn (bench, end of the turn ends_at, Unix seconds).

• queue_leave

  Give back the place in the queue, or the turn if it has started.

• close_session

  End the session now, as when it expires: the place or turn ends, viewers and the browser are disconnected, everything is forgotten.

• session_status

  The session's state without its events, cheap enough to poll: browser connected (owner), visibility, current viewer link (not renewed), viewers, created_at and expires_at (Unix seconds), run (compilations so far: event times restart at each), level and levels (null in free mode),

• submit_answer

  Challenge mode: propose `value` as the answer of the current level's test `test` (an answer test of the level's brief). One answer per second at most. The hub checks it and returns {test, ok}; the verdict is also shown in the bench. For a hint, ask the visitor to reveal one in th

• next_level

  Challenge mode: move to the next level, as the bench's "Next level" button, and only when it would be offered: every test of the current level passed and a next level exists. Returns {level, levels}, the new level (index); session_status's level changes with the bench's next stat

• capture_logic

  Record every edge of the requested pins (probes of the setup sheet; by default the logic ones) for duration_ms (1 to 10 000 ms). In the browser's simulation, in simulated time; during the session's turn on a real bench, at the bench's logic analyser, in real time (no browser or r

• capture_analog

  Sample the voltage of 1 to 4 board pins (the board's own numbers: Nano A0-A7 = 14-21, Uno A0-A5 = 14-19, Mega A0-A15 = 54-69; by default the setup's scope probes) at rate_hz (100 to 10 000) for duration_ms (1 to 10 000 simulated ms), 200 000 samples at most in all. An ADC input r

• read_capture

  State of a capture (recording, ready, failed) and its kind (logic, analog). Once ready, the measures per pin and, for a logic capture, the edges [t_us, pin, v], 2000 from offset; for an analog one, rate_hz and the samples, rows [mv_1, ...] in the order of pins (row k at k / rate_

• read_setup

  A served setup sheet (setup.json, files included; never a solution): board, components and wires (circuit), probes, levels (without their hints: hints come through read_simulation as the visitor reveals them). Plus, when it exists, schema.png, the starting circuit as the editor d

• push_circuit

  Free mode only: replace the circuit in the human's browser (the simulation stops). components: [{type, id, properties, x?, y?}] (the board is not a component), wires: [{id, start: {componentId, pinName}, end: {...}, color?, waypoints?: [{x, y}] (the wire's route, 16 points at mos

• bench_snapshot

  During the session's turn on a real bench: a photo of the bench, as an image, and t_ms, the instant of the photo in ms since the start of the turn (null when unknown). One every 2 seconds.

• spec_draft

  Draft the specification of the visitor's own project with Picodev's interview: you ask the visitor, this tool says what to ask next and makes the PDF. Nothing is sent and nothing is kept. Call it with the sections written so far (none at first). sections: {id: text in simple Mark

• brief_submit

  Send Picodev the specification of the visitor's project, as a PDF, or only return its preview (send=false). sections: {id: text in simple Markdown}, ids envelope, fonctionPrincipale, fonctions, alimentation, format, environnement, production, preferences (the 8 sections of a prod

• request_meeting

  Send Picodev a meeting request. contact: {name, email, company?, phone?}. context: the project in a few sentences (2000 characters at most): what the visitor wants to do, where they stand, what they did in the lab. availabilities: 1 to 10 slots {from, to}, ISO 8601 dates with a t

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

• ✓ 合格

  作者とリポジトリが一致

  レジストリ名は、リポジトリを所有するGitHubアカウント PICODEV-SAS で確認済みです

• … 未チェック

  今もメンテナンスされている

  このリポジトリはまだGitHubから読み取っていません

• … 未チェック

  ライセンスがある

  このリポジトリはまだGitHubから読み取っていません

• ✓ 合格

  エンドポイントが応答する

  105ミリ秒で応答（HTTP 200）

• – 対象外

  OAuthでサインイン

  サインイン不要

• ✓ 合格

  ツールの説明に隠れた指示がない

  23件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

ウェブ・ブラウザのほかのサーバーとの比較i

• このカテゴリのほかの1381件のうち0%よりスターが多い
• このカテゴリのほかの1381件のうち68%より最近レジストリに公開
• 基本チェックの結果が、このカテゴリのほかの1381件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方：↓ 週あたりのダウンロードi★ GitHubスターi3つの柱：レビュー · チェック · 利用状況i更新＝最新バージョンをレジストリに公開した日i

作者のREADME

リポジトリにREADMEが見つかりません