プロトタイプ · プレビュー版：公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説
初心者モード オフ
配色システムに合わせるライトダーク
言語ไทยEnglish中文日本語한국어EspañolDeutsch
☰ メニュー設定
初心者モード オフ
配色システムに合わせるライトダーク
言語ไทยEnglish中文日本語한국어EspañolDeutsch

SVG Lab

作者：ottoman9バージョン 0.1.3i★ –iクラウドで動く
レジストリ名app.svglab/svglab

インストール

概要

作者による説明（英語の原文）

SVG Lab MCP: the Design Engine for AI. App screens, icons, illustrations and charts as SVG.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: デザイン・画像・音声

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか？

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます：

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://svglab.app/mcp/agents

ターミナルでこれを実行します

claude mcp add --transport http svglab https://svglab.app/mcp/agents

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "svglab": {
      "url": "https://svglab.app/mcp/agents"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "svglab": {
      "type": "http",
      "url": "https://svglab.app/mcp/agents"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです：

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す（プランによっては、先に Advanced で Developer mode をオンにする必要があります）
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://svglab.app/mcp/agents

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • account_status

    Report the plan, access, SVG Lab credits left and what actions cost.

  • create_shapes

    Draw up to 80 shapes, text, paths and pencil strokes in one call; illustrations are copied from a reference. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • create_path

    Draw one path from anchors with optional absolute handles. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • pencil

    Draw a freehand stroke the way the Pencil tool does. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • edit_path

    Change a path's anchors and handles in place. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • smooth_path

    Fill missing handles, refit curves, or turn a stroke into ink.

  • boolean_op

    Union, subtract, intersect or exclude shapes into one new path.

  • offset_path

    Draw a new path at a set distance outside or inside a path.

  • transform

    Move, scale or rotate shapes.

  • align

    Align shapes to a shared edge or centre.

  • distribute

    Space three or more shapes evenly.

  • align_to_artboard

    Position shapes relative to their artboard.

  • set_style

    Change fill, stroke, caps, joins, taper or opacity.

  • set_gradient

    Paint fill or stroke with a linear or radial gradient.

  • set_filter

    Set blur, soft shadows and opacity, or clear them.

  • set_pattern

    Fill shapes with a built-in pattern.

  • clip_shapes

    Clip or mask shapes with another shape.

  • clip_to_artboard

    Clip shapes that cross their artboard's frame.

  • text_on_path

    Set a text shape along a path.

  • set_text

    Change text content or typography.

  • duplicate

    Copy shapes in place or at an offset.

  • group

    Group shapes.

  • ungroup

    Break groups into their shapes.

  • name_group

    Name a group.

  • reorder

    Change stacking order.

  • resize

    Set the exact width or height of shapes.

  • fit_to_box

    Scale and move shapes together into a box; placing an illustration removes its drawing board.

  • fit_to_children

    Resize a container to wrap its children.

  • repeat

    Copy shapes into a row, grid or circle.

  • mirror

    Make a mirrored copy, or join a half outline with its reflection.

  • flip

    Flip shapes horizontally or vertically.

  • scatter

    Place many seeded copies of one item inside an area.

  • add_texture

    Add hatch, stipple, facet or strata marks clipped to a shape of a drawing on its "Drawing · " board. On a screen the marks are refused as a picture drawn onto it.

  • create_icon

    Draw a built-in monoline icon (docs {components} names them).

  • create_layout

    Build a screen or section from a layout tree; returns boxes, ids and measured warnings. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • update_layout

    Patch or replace a layout made by create_layout. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • design_tokens

    Change the project's design tokens. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • define_styles

    Define named style presets. With a shell (Claude Code): write the fields to a JSON file, curl it to the upload link new_project gave and pass only upload_id, so the user approves a short call.

  • list_design_styles

    List style presets.

  • measure_text

    Measure how text wraps and renders, without drawing it.

  • list_layouts

    List this project's layouts.

  • list_shapes

    List shapes with ids, boxes and stacking order.

  • describe_document

    Describe the artboards and shapes.

  • inspect_path

    Read a path's anchors, handles and construction issues.

  • inspect_layout

    Measure overlap, overflow and alignment; changes nothing.

  • apply_layout_fixes

    Move misaligned layout children to their suggested positions.

  • check_contrast

    Compute WCAG contrast between two colours.

  • check_contacts

    Measure whether parts touch what they belong to.

  • optical_center

    Move an icon so its visual centre sits on its container's centre.

  • measure_optical_center

    Report the optical-centre correction without moving anything.

  • snap_to_grid

    Snap shapes to a grid.

  • normalize_spacing

    Set one equal gap between shapes.

  • normalize_radii

    Give rectangles one corner radius.

  • resolve_overflow

    Move shapes back inside a frame.

  • add_artboard

    Add a screen, slide, page or post (preset sizes it). What a control opens (dropdown, filter, menu) is add_hidden_ui.

  • set_artboard

    Resize, move, rename, recolour or delete an artboard; notes holds a slide's speaker notes.

  • list_artboards

    List the artboards.

  • set_active_artboard

    Make an artboard the active one.

  • fit_artboard

    Fit the active artboard to the artwork on it, plus optional padding.

  • delete_shapes

    Delete shapes.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン svglab.app で確認済みです（レジストリがドメインの所有を確認しています）

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    1393ミリ秒で応答（HTTP 200）

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    60件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

デザイン・画像・音声のほかのサーバーとの比較i

  • このカテゴリのほかの2785件のうち0%よりスターが多い
  • このカテゴリのほかの2785件のうち59%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの2785件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

SVG Labは安全ですか？

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか？

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか？

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか？

GitHubリポジトリの最終更新は–、最新バージョン（0.1.3）がレジストリに届いたのは21 日前です。

どのアプリで使えますか？

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ（開発者モードのChatGPTなど）でも使えます。

代わりに使えるものは？

同じカテゴリには：Figma Context MCP, Claude Real Video, Figma MCP Server

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方：↓ 週あたりのダウンロードi★ GitHubスターi3つの柱：レビュー · チェック · 利用状況i更新＝最新バージョンをレジストリに公開した日i

Figma Context MCP

Give your coding agent access to your Figma data. Implement designs in any framework in one-shot.

作者：GLips広く使われている↓ 16.1万/週★ 1.6万5 か月前更新

パソコンで動く
インストール

Claude Real Video

Let any LLM watch a video locally — and search everything it has ever watched.

作者：HUANGCHIHHUNGLeo広く使われている↓ 1106/週★ 22842 か月前更新

パソコンで動く
インストール

Figma MCP Server

The Figma MCP server brings Figma design context directly into your AI workflow.

作者：figma成長中★ 215213 か月前更新

クラウドで動く✓ mcp.figma.com
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

SVG Lab MCP

Add to Claude opens Claude's Add custom connector dialog with SVG Lab already filled in; press Add, then Connect. The Cursor and VS Code buttons open SVG Lab's install step for that app, which hands over to the app (GitHub cannot link to an app directly).

Listed on Smithery and Glama. Facts, offer and setup: https://svglab.app/mcp-server

SVG Lab MCP lets your AI design inside SVG Lab (svglab.app), and you watch it live. Connect Claude, ChatGPT, Codex, Cursor or any other MCP client and ask for app screens, icons, illustrations or charts: your AI designs them in your SVG Lab project with SVG Lab's Design Engine (layout, spacing, type, colour and drawing, checked before anything is finished). claude.ai, ChatGPT and Codex show a live card in the chat with the screen being drawn; in any app the AI can open the project in the SVG Lab editor so you watch the work on SVG Lab's canvas. The finished designs are saved to your SVG Lab projects as clean SVG, ready to export as SVG, PNG or PDF.

The AI brings the idea (content, palette, direction); SVG Lab guarantees the structure (spacing, alignment, sizing, type, valid vector geometry). It runs on SVG Lab's servers, so there is nothing to install and no browser tab needs to stay open.

https://svglab.app/mcp

Streamable HTTP, OAuth sign-in, no key needed.

This repository holds documentation, ready-made client configs and an agent skill. It contains no server code. The full, always current setup guide is at svglab.app/mcp-setup.

Contents

  • For AI agents
  • Before you start
  • Quick setup: Claude · Claude Code · ChatGPT · Codex · Cursor · VS Code · OpenCode · Windsurf · Gemini CLI · Any MCP client
  • Check it works
  • Examples
  • Access
  • FAQ
  • Links
  • Files in this repository

For AI agents

You are probably setting this up for a user. Facts:

name:              svglab

server_url: https://svglab.app/mcp transport: streamable HTTP (remote). Not SSE, not stdio. Nothing to install. auth: OAuth 2.1, authorization code with PKCE (S256), dynamic client registration resource_metadata: https://svglab.app/.well-known/oauth-protected-resource/mcp auth_server_meta: https://svglab.app/.well-known/oauth-authorization-server registration: https://svglab.app/oauth/register scope: mcp client_id: not needed; leave client ID and client secret empty no_credentials: POST /mcp answers 401 with a WWW-Authenticate header pointing at resource_metadata key_alternative: header "Authorization: Bearer svl_KEY" (the user creates the key at svglab.app: account menu, SVG Lab MCP, Generate key). Never invent a key. access: every account gets 100 free credits (up to 24 app screens) once to try it, no form; then a plan (Starter, Plus, Max, Ultra or Team) or a top-up: https://svglab.app/billing cost: credits: 1 a tool call, 2 a reference image search, failed calls free; 100 free credits (up to 24 app screens) once per account, then monthly plan credits or top-up credits (never expire) usage: https://svglab.app/usage (the signed in account's credits and its calls by tool, project and day) browser_tab: not needed; the server runs the Design Engine and saves to the user's My Projects first_call: can take 10 to 30 seconds while the Design Engine starts sessions: up to 2 AI sessions per SVG Lab account at once, each in its own artboard group one_click_claude: https://claude.ai/customize/connectors?modal=add-custom-connector&connectorName=SVG%20Lab&connectorUrl=https%3A%2F%2Fsvglab.app%2Fmcp (opens Add custom connector with SVG Lab filled in; the user presses Add, then Connect) one_click_cursor: cursor://anysphere.cursor-deeplink/mcp/install?name=svglab&config=eyJ1cmwiOiJodHRwczovL3N2Z2xhYi5hcHAvbWNwIn0= one_click_vscode: vscode:mcp/install?%7B%22name%22%3A%22svglab%22%2C%22type%22%3A%22http%22%2C%22url%22%3A%22https%3A%2F%2Fsvglab.app%2Fmcp%22%7D app_steps: https://svglab.app/mcp-server?app=NAME opens one app's steps; NAME is claude, chatgpt, codex, claude-code, cursor or vscode. Every app: https://svglab.app/mcp-server#connect registry_name: app.svglab/svglab setup_markdown: https://svglab.app/mcp-setup (send the header Accept: text/markdown) agent_skill: skills/svglab-mcp/SKILL.md in this repository (npx skills add ottoman9/svglab-mcp)

Procedure:

  1. Find the app. Work out which app the user is in (Claude Code, OpenCode, Codex, Cursor, VS Code, Gemini CLI, Windsurf, Claude, ChatGPT). If you cannot tell, ask once. If the user is not sure their account has access, ask them to open https://svglab.app/billing while signed in: it shows the current plan and the credits left (plan, free and top-up). Every account gets 100 free credits (up to 24 app screens); after that the SVG Lab MCP needs a plan (Starter, Plus, Max, Ultra or Team) or a top-up.
  2. Add the server. Use that app's block below exactly as written, with the name svglab. Prefer the user level config (every project) unless the user asks for one project. When editing a config file, merge the entry into the existing file and keep every other server and setting. Never put a key in a project file that could be committed to git; use the environment variable form.
  3. Start the sign-in. Run the app's sign-in step (for example opencode mcp auth svglab, or /mcp in Claude Code). It opens the browser and waits until the user signs in to SVG Lab and presses Approve, so either run it and wait, or ask the user to run it in their own terminal. You cannot approve for them; tell them what to expect.
  4. Reload. Restart the app or start a new session so it loads the SVG Lab tools. If you are running inside the app you are configuring, a restart ends your own session: finish the steps above first, then ask the user to restart and paste the test prompt from Check it works into a new session.
  5. Verify. In the new session, check your own tool list for tools from svglab. With access there are dozens of design tools. If there is only one tool, an account status tool, the connection works but the account cannot design yet (its 100 free credits are used up and it has no plan credits and no top-up credits, the account is suspended, or a key was replaced): call it and pass its message to the user. With sign-in, an account without access usually stops earlier: the SVG Lab sign-in page says the free credits are used up; the user can still approve, and the account status tool then says how to get credits.
  6. Test. Run the test prompt from Check it works and give the user the project link it returns. The first design step can take 10 to 30 seconds; that is not a failure.
  7. If access is not granted, tell the user: "SVG Lab is set up, but your SVG Lab account has no SVG Lab credits left: its 100 free credits are used up. Choose a plan, or buy a top-up, at https://svglab.app/billing with the same account, and then it works with no more setup."

Before you start

  1. An SVG Lab account. Sign in at https://svglab.app/ with Google or an email link.
  2. Nothing to buy to try it: every account gets 100 free credits (up to 24 app screens) once, with no form (a tool call costs 1 credit). After that, choose a plan (Starter, Plus, Max, Ultra or Team) or buy a top-up at https://svglab.app/billing : $10 for 5,000 credits (up to 1,200 app screens), $25 for 10,000 credits (up to 2,400 app screens) or $50 for 25,000 credits (up to 6,100 app screens). Top-up credits never expire; all purchases are final.

Sign in with the same account every time: when the AI app opens the SVG Lab sign-in page, use the same account, so its free credits, plan or top-ups apply. Designs are saved to that account's My Projects.

Every app signs in the same way: add the address, the app opens a "Sign in to SVG Lab" page, sign in, check which app is asking, press Approve.

Quick setup

Short versions below. Ready config files are in configs/. The full guide, with key-based setups and troubleshooting, is at https://svglab.app/mcp-setup .

Claude (claude.ai and Claude Desktop)

Custom connectors are available on the Free, Pro, Max, Team and Enterprise plans; a Free account can add one custom connector.

  1. One click: open Add SVG Lab to Claude. Claude opens Add custom connector with the name SVG Lab and the URL https://svglab.app/mcp already filled in. Check them and leave Advanced settings (OAuth Client ID and Secret) empty.
  2. Press Add, then Connect next to SVG Lab. Sign in to SVG Lab and press Approve.
  3. In a chat, press + at the lower left, open Connectors and make sure SVG Lab is switched on.

By hand instead: in Claude, open Customize, then Connectors (on the web: https://claude.ai/customize/connectors), press +, then Add custom connector. Name it SVG Lab, paste https://svglab.app/mcp as the remote MCP server URL, and continue from step 2.

Team or Enterprise: an owner adds the connector once under Organization settings, then Connectors; each person presses Connect and signs in with their own SVG Lab account.

Claude Code
claude mcp add --transport http --scope user svglab https://svglab.app/mcp

--scope user makes SVG Lab available in every project. Leave it out to add it to the current project only. Then start Claude Code, type /mcp, choose svglab and pick Authenticate. The browser opens the SVG Lab sign-in page; press Approve. /mcp should show svglab as connected.

ChatGPT

Install the SVG Lab plugin in one click, no developer mode:

  1. Open the SVG Lab plugin and press +, or in ChatGPT open Plugins, search SVG Lab and press +.
  2. Sign in to SVG Lab when asked and press Approve.
  3. Ask for a design in any chat.
Codex

Codex installs the same SVG Lab plugin:

  1. In the Codex app, open Plugins, search SVG Lab and press +. In the Codex CLI, type /plugins.
  2. Sign in to SVG Lab when asked and press Approve.
  3. Start a new Codex thread so it loads the SVG Lab tools.

The Codex IDE extension has no plugins. There, add the server by hand (the app, the IDE extension and the CLI share ~/.codex/config.toml):

codex mcp add svglab --url https://svglab.app/mcp

Or add to ~/.codex/config.toml by hand:

[mcp_servers.svglab]

url = "https://svglab.app/mcp" `

冒頭だけを表示しています。続きはリポジトリで読めます

PopNxに聞く