プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Slice

作者:tryslicemedia.comバージョン 1.0.1i★ –iクラウドで動く
レジストリ名com.tryslicemedia/slice

インストール

概要

作者による説明(英語の原文)

Turn long podcast episodes, video or audio, into captioned vertical clips and transcripts.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: デザイン・画像・音声

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://mcp.tryslicemedia.com/mcp

ターミナルでこれを実行します

claude mcp add --transport http slice https://mcp.tryslicemedia.com/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "slice": {
      "url": "https://mcp.tryslicemedia.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "slice": {
      "type": "http",
      "url": "https://mcp.tryslicemedia.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://mcp.tryslicemedia.com/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • start_episode

    Use this when the user wants a podcast, interview, stream or other video turned into short clips. An audio-only episode (MP3, M4A, WAV, OGG or FLAC) works too: its clips come out as captioned vertical videos drawn with an audio template. With a video or audio file attached in the

  • get_episode

    Use this when the user asks how an episode is going, whether it is ready, or what clips were found. Returns one status for the whole pipeline (waiting_for_upload, uploading, transcribing, finding_clips, ready or failed) and, once ready, the found clips with number, ref, title, op

  • make_clips

    Use this when the user picks found clips to make. Cuts each one from the episode and renders it with captions burned in, in one step. Pass the numbers or refs get_episode listed (refs in brackets are fine), or any stretch of the episode as {"start_seconds", "end_seconds", "title"

  • get_job

    Use this when the user wants to know whether a clip is cut or rendered, or wants the finished file. Pass the job_id from make_clips or restyle_clip, or a clip_id for that clip's latest render. Returns the status, progress, a still from the clip and, when finished, a short downloa

  • restyle_clip

    Use this when the user wants a made clip changed and rendered again: a different caption style, bigger or smaller captions, captions moved up or down, the hook title turned on, off or reworded, or the whole video shown instead of cropped (fit, background). The change is saved on

  • list_styles

    Use this when the user wants to know which caption looks they can choose from. Returns each style's id, name, a one-line description and a link to a preview picture. Pass styles to look up particular ones. Do not use to change a clip (use restyle_clip or make_clips).

  • find_clips_about

    Use this when the user wants clips from an episode on a particular topic or for a particular audience, e.g. "clips about creativity for artists" or "moments for young entrepreneurs". Searches the episode again for moments that fit the focus, skipping clips already found, and adds

  • get_visual_style

    Use this when someone gives a Slice style ref (like "sref-V4RYN2"), names a style from tryslicemedia.com/styles, or pastes a prompt that says to call get_visual_style. Returns the style's look and feel: palette, materials, motion and type rules, what it suits, how to use it in a

  • suggest_visual_styles

    Use this when the person asks to see Slice's style library, and only then. When someone wants visuals or animation and has no style, design your own looks for the clip first (owner, 1 November 2026: the library is being reworked); never list library styles in the chat unasked. Wi

  • get_clip_edit

    Use this when you are about to fix a made clip, first: returns every word with its index, text and times on the clip (seconds), whether it is a filler ("um"), whether a long pause follows it, and whether it is already cut; plus the hook title, the caption look, the trim, the fram

  • cut_words

    Use this when the person wants to remove words, every filler, or long pauses from a made clip, the way the Slice editor's clean-up does: the sound and the captions both, with breathing room kept so it never sounds choppy. Pass words as a list of indexes from get_clip_edit, or {"f

  • set_hook_title

    Use this when the person wants to reword, turn on or off, or restyle the title card at the top of a made clip. style is a box such as "white box", "black box" or "lime word" (or a title template id). Saves the clip only, no render.

  • edit_captions

    Use this when the person wants to change captions on a made clip, applied in order. Word indexes and seconds come from get_clip_edit. set_text {word, text} fixes a word; split {word} starts a new caption at it; join {word} joins its caption to the one before; line_break {word} br

  • set_trim

    Use this when the person wants to change where a made clip starts or ends, or to cut out any stretch in the middle, in seconds on the clip (get_clip_edit gives the word times). remove [{start_seconds, end_seconds}] cuts stretches (sound, picture and their captions); restore [...]

  • set_caption_style

    Use this when the person wants to change a made clip's captions, anything a person can change by hand, without a render: style (list_styles names), size (smaller, bigger, small, medium, large, extra_large), position (up, down, top, middle, lower, bottom) or an exact height (capti

  • set_frame

    Use this when the person wants to change how a made clip's picture is framed, anything the Slice editor's Frame tab and Layouts do, with no render. aspect: 9:16, 4:5, 1:1, 16:9, 3:4, source (ask the person which shape first). layout: follow-speaker, follow-both, two-people, face-

  • undo_edit

    Use this when the person wants to take back changes you (the person's AI) made to a clip with the edit tools, newest first, the same as Undo in the Slice editor. A storyboard moment taken off the clip (in the editor or by you) is undone here too: it comes back as it was (edit_id

  • templates

    Use this when the person likes a look and wants to keep it, or wants their saved look on clips. The same saved templates as the Slice editor's Saved styles. kind: style (the caption look with logo, framing, stacking and caption rules; "setup" also keeps the clip's shape, layout,

  • read_captions

    Use this when the user asks what a clip says, what is on screen at a particular moment, which caption contains a word or a typo, or who said something. It is also the only way to get a caption's id, so read it first whenever a later step needs to name one caption. Narrow with at_

  • transcribe_audio

    Use this when the user wants the words: speech in an audio or video file turned into text, from a podcast, interview, lecture, meeting or voice note. Accepts a file the user attached (file) or a direct https link to a media file such as .mp3, .m4a, .wav or .mp4 (url). Returns the

  • transcription_status

    Use this when transcribe_audio returned status "processing", to check whether the transcript is finished and get its text. Pass the transcription_id it returned. Call it again after a short wait while the status is still "processing". Only answers in the conversation (or Slice ac

  • email_transcript

    Use this only when the user explicitly asks for a finished transcript to be emailed to them. Needs a Slice sign-in, asked for on first use, and sends the .txt, .srt and .vtt files only to the confirmed email address on that Slice account, never to another address. Each transcript

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ! 注意

    作者とリポジトリが一致

    レジストリにソースのリポジトリが載っていないため、公開者(tryslicemedia.com)とコードを照合できません

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    325ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    22件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

デザイン・画像・音声のほかのサーバーとの比較i

  • このカテゴリのほかの2754件のうち0%よりスターが多い
  • このカテゴリのほかの2754件のうち59%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの2754件のうち43%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Sliceは安全ですか?

当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.1)がレジストリに届いたのは21 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Figma Context MCP, Claude Real Video, Figma MCP Server

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Figma Context MCP

作者:GLips

Give your coding agent access to your Figma data. Implement designs in any framework in one-shot.

パソコンで動く★ 16,165MIT5 か月前更新
インストール

Claude Real Video

作者:HUANGCHIHHUNGLeo

Let any LLM watch a video locally — and search everything it has ever watched.

パソコンで動く★ 2,284MIT2 か月前更新
インストール

Figma MCP Server

作者:figma

The Figma MCP server brings Figma design context directly into your AI workflow.

クラウドで動く★ 2,15213 か月前更新
インストール

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く