Sparkplug B

Name: Sparkplug B
Author: nagarjunr

作者：nagarjunr版本 0.1.0i★ –i在你的电脑上运行

注册名称io.github.nagarjunr/sparkplug-b

安装

概览

作者提供的说明（英文原文）

MCP server for Sparkplug B: node/device discovery, metrics, commands, host state over MQTT.

PopNx MCP 的三大支柱

这三项永远不会合并成一个分数：意见、测量和人气是不同的东西。

用户评价i暂无评价评价功能将在后续阶段与账户功能一起开放
我们的基础检查i1 项中通过 1 项依据公开信息检查；尚未扫描代码
使用情况i非常新↓ 14/周 · ★ –

它能帮你做什么

我们还没有为它写通俗的介绍。下面是我们从注册中心读取到的事实。

连接方式: 在你的电脑上运行
传输方式: stdio
分类: 其他
你需要填写：SPARKPLUG_MQTT_HOST, SPARKPLUG_HOST_ID, SPARKPLUG_MQTT_PASSWORD

安装

选择你使用的 AI 应用，然后复制设置。

安装之前

基础检查：1 项中通过 1 项
在你的电脑上运行，拥有你的用户账户的权限（文件、网络、应用）。
需要你自己填写： SPARKPLUG_MQTT_HOST, SPARKPLUG_HOST_ID, SPARKPLUG_MQTT_PORT, SPARKPLUG_MQTT_USERNAME, SPARKPLUG_MQTT_PASSWORD, SPARKPLUG_MQTT_USE_TLS, SPARKPLUG_GROUP_ID

标为机密的值是你账户的钥匙。千万不要分享给别人，也不要粘贴到聊天里。

你需要

PyPI已安装 Python 的 uv（用于 uvx 命令）

你用的是哪个应用？

ClaudeClaude CodeCursorVS CodeChatGPT

在上方选择你的应用。我们会记住它，下次按钮会显示“安装到 …”。

打开 Claude Desktop → Settings → Developer → Edit Config，把下面的内容粘贴到 claude_desktop_config.json

{
  "mcpServers": {
    "sparkplug-b": {
      "command": "uvx",
      "args": [
        "sparkplug-b-mcp-server"
      ],
      "env": {
        "SPARKPLUG_MQTT_HOST": "your-value",
        "SPARKPLUG_HOST_ID": "your-value",
        "SPARKPLUG_MQTT_PORT": "your-value",
        "SPARKPLUG_MQTT_USERNAME": "your-value",
        "SPARKPLUG_MQTT_PASSWORD": "your-value",
        "SPARKPLUG_MQTT_USE_TLS": "your-value",
        "SPARKPLUG_GROUP_ID": "your-value"
      }
    }
  }
}

在终端中运行这条命令

claude mcp add sparkplug-b --env SPARKPLUG_MQTT_HOST=your-value --env SPARKPLUG_HOST_ID=your-value --env SPARKPLUG_MQTT_PORT=your-value --env SPARKPLUG_MQTT_USERNAME=your-value --env SPARKPLUG_MQTT_PASSWORD=your-value --env SPARKPLUG_MQTT_USE_TLS=your-value --env SPARKPLUG_GROUP_ID=your-value -- uvx sparkplug-b-mcp-server

运行前请先填写空着的值。

在 Cursor 中打开

或者自己复制设置

粘贴到项目中的 .cursor/mcp.json，或 ~/.cursor/mcp.json

{
  "mcpServers": {
    "sparkplug-b": {
      "command": "uvx",
      "args": [
        "sparkplug-b-mcp-server"
      ],
      "env": {
        "SPARKPLUG_MQTT_HOST": "your-value",
        "SPARKPLUG_HOST_ID": "your-value",
        "SPARKPLUG_MQTT_PORT": "your-value",
        "SPARKPLUG_MQTT_USERNAME": "your-value",
        "SPARKPLUG_MQTT_PASSWORD": "your-value",
        "SPARKPLUG_MQTT_USE_TLS": "your-value",
        "SPARKPLUG_GROUP_ID": "your-value"
      }
    }
  }
}

浏览器会先询问是否打开应用，然后应用会显示设置并请你确认。密钥的值会留空，由你自己填写。

在 VS Code 中打开

或者自己复制设置

粘贴到项目中的 .vscode/mcp.json

{
  "servers": {
    "sparkplug-b": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "sparkplug-b-mcp-server"
      ],
      "env": {
        "SPARKPLUG_MQTT_HOST": "your-value",
        "SPARKPLUG_HOST_ID": "your-value",
        "SPARKPLUG_MQTT_PORT": "your-value",
        "SPARKPLUG_MQTT_USERNAME": "your-value",
        "SPARKPLUG_MQTT_PASSWORD": "your-value",
        "SPARKPLUG_MQTT_USE_TLS": "your-value",
        "SPARKPLUG_GROUP_ID": "your-value"
      }
    }
  }
}

浏览器会先询问是否打开应用，然后应用会显示设置并请你确认。密钥的值会留空，由你自己填写。

这个服务器在你的电脑上运行，而 ChatGPT 只能连接互联网上的服务器。请选择其他应用。

你的选择通过 Cookie 保存在这台设备上，无需账户。

需要你填写的值

SPARKPLUG_MQTT_HOST 必填 env
MQTT broker hostname or IP.
SPARKPLUG_HOST_ID 必填 env
This connector's Sparkplug Host Application ID (used in the spBv1.0/STATE/{id} topic).
SPARKPLUG_MQTT_PORT env
MQTT broker port, default 1883
SPARKPLUG_MQTT_USERNAME env
Broker username, if required
SPARKPLUG_MQTT_PASSWORD 机密 env
Broker password, if required
SPARKPLUG_MQTT_USE_TLS env
true/false, default false
SPARKPLUG_GROUP_ID env
Restrict discovery/watching to a single Sparkplug Group ID; omit to subscribe to every group

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同，请以 README 为准。

它能做什么

它在你的电脑上运行；安装后，工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息；我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月9日

✓ 通过
作者与仓库一致
注册名称已通过 GitHub 账户 nagarjunr 验证，该账户拥有此仓库
… 尚未检查
仍在维护
我们还没有从 GitHub 读取这个仓库
… 尚未检查
有许可证
我们还没有从 GitHub 读取这个仓库
– 不适用
端点有响应
它在你的电脑上运行，没有互联网端点
– 不适用
使用 OAuth 登录
在你的电脑上运行，改用本地设置
… 尚未检查
工具描述中没有隐藏指令
它在你的电脑上运行；我们只能读取互联网端点的工具列表

与“其他”中的其他服务器比较i

星标数多于此分类中其他 18681 个服务器的 0%
发布到注册中心的时间比此分类中其他 18681 个服务器的 18% 更新
基础检查结果等于或优于此分类中其他 18681 个服务器的 100%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时，星标数才计入。

常见问题

Sparkplug B 安全吗？

它在 1 项适用的基础检查中通过了 1 项。我们没有阅读代码。在添加密钥或令牌之前，请先看看这个服务器要求哪些权限，并使用只具备所需权限的密钥。

它需要哪些密钥或代码？

你需要填写：SPARKPLUG_MQTT_HOST, SPARKPLUG_HOST_ID, SPARKPLUG_MQTT_PASSWORD

它在我的电脑上运行还是在云端？

它在你的电脑上运行。你的 AI 应用会在需要时启动它，数据不会经过作者的服务器（除非它自己调用在线服务）。

它还在维护吗？

GitHub 仓库最后更新于–，最新版本（0.1.0）于3个月前进入注册中心。

哪些应用可以使用它？

支持 MCP 的应用，例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它？

同一分类中有：Spec Driven Development, Remote Desktop Commander, agentPickup

替代选择

同一分类中其他作者的服务器，按星标数排序。

如何看卡片：↓ 每周下载量i★ GitHub 星标i三大支柱：评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者：formulahendry起步阶段↓ 66/周★ 44014个月前更新

在你的电脑上运行

安装

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者：desktop-commander正在增长★ 2114天前更新

在云端运行✓ desktopcommander.app

安装

agentPickup

Find pickup shops near you, order, pay by card or USDC (x402), and get the QR to collect in person.

作者：Tokenise-au正在增长↓ 1160/周今天更新

电脑或云端

安装

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

Sparkplug B MCP Server

A Model Context Protocol (MCP) server for Sparkplug B — the Eclipse-standard MQTT topic/payload convention for industrial/SCADA data (birth/death certificates, sequenced metrics, protobuf payloads). Works against any MQTT broker that carries Sparkplug B traffic; only the open Sparkplug B specification is used, no vendor-specific extensions.

This server acts as a Sparkplug B Primary Host Application: it subscribes to the entire spBv1.0 namespace, discovers Edge Nodes and Devices from their NBIRTH/DBIRTH messages, tracks their live metrics, and can send them commands (NCMD/DCMD) — the same role a SCADA/historian host application plays in a real deployment.

Built with FastMCP and pysparkplug (itself built on paho-mqtt).

Tools

Tool	Description
`get_connection_status()`	Report the broker connection and this host application's identity.
`set_host_online(online)`	Publish this connector's own retained Sparkplug `STATE` message.
`list_edge_nodes(group_id?)`	List Edge Nodes discovered via `NBIRTH`/`NDEATH`.
`list_devices(group_id?, edge_node_id?)`	List Devices discovered via `DBIRTH`/`DDEATH`.
`get_node_metrics(group_id, edge_node_id)`	Latest known metric values for an Edge Node.
`get_device_metrics(group_id, edge_node_id, device_id)`	Latest known metric values for a Device.
`send_node_command(group_id, edge_node_id, metrics)`	Send an `NCMD` — write one or more of a node's metrics.
`send_device_command(group_id, edge_node_id, device_id, metrics)`	Send a `DCMD` — write one or more of a device's metrics.
`request_node_rebirth(group_id, edge_node_id)`	Standard `Node Control/Rebirth` command — asks a node to republish its full `NBIRTH`.
`start_watch(group_id?, edge_node_id?, device_id?, message_types?)`	Start buffering decoded Sparkplug traffic matching an optional filter. Returns a `session_id`.
`get_events(session_id, max_events, timeout_seconds)`	Drain buffered events from a watch session; can wait briefly for one to arrive.
`stop_watch(session_id)`	Stop a watch session and discard its buffered events.
`list_watches()`	List all active watch sessions.

Why watching is session-based

Like the MQTT wire protocol underneath it, Sparkplug B is a continuous stream, not a request/response API — a single MCP tool call can't "wait forever" for the next birth or data message. start_watch registers an optional filter (group/node/device/message-type) and buffers matching decoded messages in the background (this connector is always subscribed to the whole spBv1.0 namespace, so no extra broker subscription is needed per watch); get_events drains that buffer, optionally waiting a bounded amount of time for new data. Call stop_watch when done.

Supported metric datatypes

INT8/INT16/INT32/INT64, UINT8/UINT16/UINT32/UINT64, FLOAT, DOUBLE, BOOLEAN, STRING, TEXT, UUID, DATETIME, BYTES, FILE, and their *_ARRAY variants. DATASET, TEMPLATE, PROPERTYSET, and PROPERTYSETLIST are part of the Sparkplug B spec but unsupported by the underlying pysparkplug codec, so they're rejected with a clear error rather than silently mishandled.

For send_node_command/send_device_command, value shape depends on datatype: plain int/float/bool/str for scalars, an ISO 8601 string for DATETIME, a base64 string for BYTES/FILE, and a JSON list for *_ARRAY types.

Configuration

Env var	Required	Description
`SPARKPLUG_MQTT_HOST`	Yes	Broker hostname or IP.
`SPARKPLUG_HOST_ID`	Yes	This connector's Sparkplug Host Application ID (used in the `spBv1.0/STATE/{id}` topic).
`SPARKPLUG_MQTT_PORT`	No	Default `1883`.
`SPARKPLUG_MQTT_USERNAME` / `SPARKPLUG_MQTT_PASSWORD`	No	Broker credentials.
`SPARKPLUG_MQTT_CLIENT_ID`	No	Defaults to a broker-assigned ID.
`SPARKPLUG_MQTT_KEEPALIVE`	No	Seconds, default `60`.
`SPARKPLUG_MQTT_CONNECT_TIMEOUT`	No	Seconds to wait for the initial connect, default `10`.
`SPARKPLUG_MQTT_USE_TLS`	No	`true`/`false`, default `false`.
`SPARKPLUG_MQTT_TLS_CA_CERTS`	No	Path to a CA bundle. Omit to use the system trust store.
`SPARKPLUG_MQTT_TLS_CLIENT_CERT` / `SPARKPLUG_MQTT_TLS_CLIENT_KEY`	No	For mutual TLS.
`SPARKPLUG_GROUP_ID`	No	Restrict discovery/watching to a single Sparkplug Group ID. Omit to subscribe to every group (`spBv1.0/#`).

Running locally

uv sync

export SPARKPLUG_MQTT_HOST=localhost export SPARKPLUG_MQTT_PORT=1883 export SPARKPLUG_HOST_ID=my-mcp-host uv run sparkplugbmcpserver.py

See mcp.json for ready-to-use client configs (stdio and Docker).

Testing against a real broker

This repo's design principles call for testing against a real instance rather than mocks. docker-compose.yml spins up Eclipse Mosquitto (2.x) with an anonymous listener for local testing. Test fixtures use pysparkplug's own EdgeNode/Device classes to act as real simulated PLCs/devices — publishing genuine NBIRTH/DBIRTH/NDATA/DDATA/NDEATH messages and receiving genuine NCMD/DCMD commands over the wire — so coverage is protocol-level, not hand-rolled mocks. Only the "physical" node/device is simulated, since no free real PLC/edge-node hardware exists to test against; the Sparkplug B protocol handling on both sides is real.

docker compose up -d       # start Mosquitto on localhost:1883 (anonymous, local testing only)

uv run pytest -v # tests/conftest.py also starts/stops the stack automatically docker compose down # stop it manually if you started it yourself

License notes

docker-compose.yml and the files under docker/ configure the open-source Eclipse Mosquitto broker (EPL-2.0) for local testing only — they are not part of the MCP server itself.