原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。评价和账户功能将在后续阶段推出。
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

RoboSelect360 - Independent Humanoid Robot Intelligence

作者:roboselect360.com版本 1.0.3i★ –i在云端运行
注册名称com.roboselect360/humanoid-robots

安装

概览

作者提供的说明(英文原文)

Independent humanoid robot intelligence: capabilities, real cost, supply chain. Free and paid tiers.

PopNx MCP 的三大支柱

这三项永远不会合并成一个分数:意见、测量和人气是不同的东西。

它能帮你做什么

我们还没有为它写通俗的介绍。下面是我们从注册中心读取到的事实。

  • 连接方式: 在云端运行
  • 传输方式: Streamable HTTP
  • 分类: 其他
  • 你需要填写:X-API-Key

安装

选择你使用的 AI 应用,然后复制设置。

安装之前

标为机密的值是你账户的钥匙。千万不要分享给别人,也不要粘贴到聊天里。

你需要

你用的是哪个应用?

在上方选择你的应用。我们会记住它,下次按钮会显示“安装到 …”。

这个地址需要在请求的 header 中放入密钥,而添加连接器的菜单无法设置。请改用 Claude Code、Cursor 或 VS Code。

在终端中运行这条命令

claude mcp add --transport http humanoid-robots https://mcp.roboselect360.com/mcp --header 'X-API-Key: your-value'

运行前请先填写空着的值。

在 Cursor 中打开

或者自己复制设置

粘贴到项目中的 .cursor/mcp.json,或 ~/.cursor/mcp.json

{
  "mcpServers": {
    "humanoid-robots": {
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

浏览器会先询问是否打开应用,然后应用会显示设置并请你确认。密钥的值会留空,由你自己填写。

在 VS Code 中打开

或者自己复制设置

粘贴到项目中的 .vscode/mcp.json

{
  "servers": {
    "humanoid-robots": {
      "type": "http",
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

浏览器会先询问是否打开应用,然后应用会显示设置并请你确认。密钥的值会留空,由你自己填写。

这个地址需要在请求的 header 中放入密钥,而添加连接器的菜单无法设置。请改用 Claude Code、Cursor 或 VS Code。

你的选择通过 Cookie 保存在这台设备上,无需账户。

需要你填写的值

  • X-API-Key 机密 HTTP header
    Optional RoboSelect360 key. Without it, the free tools are open; with it, the robots you have purchased are unlocked.

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

它能做什么

工具名称和描述与服务器在 2026年11月8日 报告的完全一致。这些内容由作者撰写,不是我们写的;我们以纯文本形式显示。

  • hardware_get_system_status

    Health of the SEMICONDUCTOR layer: profiles loaded, semiconductor signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • hardware_list_robots

    List the robot catalogue with filters, including semiconductor-layer scope and payload. Returns the same catalogue as the mechanical and software variants - call one, not three. Pick this one to filter on whether a robot is in scope for the semiconductor layer.

  • hardware_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus whether a per-robot semiconductor bill of materials exists for it. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • hardware_list_signals

    List semiconductor supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • hardware_get_robot_signals

    Active supply chain signals affecting one robot's semiconductor BOM. Requires an access right on the robot requested.

  • hardware_get_block_analysis

    Analyse one functional block of the semiconductor layer, for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • hardware_compare_robots

    Compare 2 to 5 robots side by side on semiconductor BOM, metrics, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • hardware_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its semiconductor BOM: geographic concentration, single-source exposure, export control. Requires an access right on the robot requested.

  • hardware_get_robot_hardware

    Semiconductor bill of materials for one robot: functional blocks, components, suppliers. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • mechanical_get_system_status

    Health of the MECHANICAL layer: mechanical profiles loaded, mechanical signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • mechanical_list_robots

    List the robot catalogue with filters, including mechanical-profile status and payload. Returns the same catalogue as the hardware and software variants - call one, not three. Pick this one to filter on mechanical coverage.

  • mechanical_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its mechanical-profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • mechanical_list_signals

    List mechanical supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • mechanical_get_robot_signals

    Active supply chain signals affecting one robot's mechanical BOM. Requires an access right on the robot requested.

  • mechanical_get_block_analysis

    Analyse one mechanical block (actuation, structure, energy, perception), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • mechanical_compare_robots

    Compare 2 to 5 robots side by side on mechanical BOM, specifications, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • mechanical_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its mechanical BOM: geographic concentration, critical raw materials, single-source exposure. Requires an access right on the robot requested.

  • mechanical_get_robot_mechanical

    Mechanical bill of materials for one robot: motors, reducers, screws, bearings, batteries, structure, wiring. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • software_get_system_status

    Health of the SOFTWARE layer: software profiles loaded, software signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • software_list_robots

    List the robot catalogue with filters, including software tier and software-profile status. Returns the same catalogue as the hardware and mechanical variants - call one, not three. Pick this one to filter by software tier.

  • software_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its software tier and profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • software_list_signals

    List software supply chain signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • software_get_robot_signals

    Active supply chain signals affecting one robot's software stack. Requires an access right on the robot requested.

  • software_get_block_analysis

    Analyse one software block (OS, middleware, runtime, control, fleet), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • software_compare_robots

    Compare 2 to 5 robots side by side on software BOM, TCO, jurisdiction exposure, lock-in and export control risk. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • software_get_dependency_profile

    Jurisdiction and supply chain dependency analysis for one robot, built on its software stack: jurisdiction concentration, lock-in, export control, cloud dependency. Requires an access right on the robot requested.

  • software_get_robot_software

    Software bill of materials for one robot: OS, middleware, AI runtime, motion control, fleet management. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • get_access_manifest

    What THIS connection can call right now: tools callable without any purchase, tools that need an access right, the robots you already hold, and the ones that can be unlocked. Free for everyone, no key and no account. Call it FIRST: it removes the need to discover your own access

  • get_robot_capabilities

    What one robot has actually been seen doing, and the evidence for each capability: a label per capability (in production, attested by a customer or third party, shown by the manufacturer, claimed only, published failure, no evidence found) and every dated observation behind it, f

  • get_robot_support

    After-sales support profile of one robot, for a buyer in Europe: warranty duration, start and exclusions, spare parts with dated offers (seller, price in original currency, availability, lead time), maintenance required of the operator, software updates and subscriptions, service

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月9日

  • ! 注意

    作者与仓库一致

    注册中心没有列出源代码仓库,因此无法将发布者(roboselect360.com)与代码对应起来

  • … 尚未检查

    仍在维护

    我们还没有从 GitHub 读取这个仓库

  • … 尚未检查

    有许可证

    我们还没有从 GitHub 读取这个仓库

  • ✓ 通过

    端点有响应

    在 261 毫秒内响应(HTTP 200)

  • – 不适用

    使用 OAuth 登录

    无需登录

  • ✓ 通过

    工具描述中没有隐藏指令

    已读取 30 个工具描述,未发现针对 AI 的隐藏指令

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 18648 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 18648 个服务器的 64% 更新
  • 基础检查结果等于或优于此分类中其他 18648 个服务器的 36%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

RoboSelect360 - Independent Humanoid Robot Intelligence 安全吗?

它在 3 项适用的基础检查中通过了 2 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

你需要填写:X-API-Key

它在我的电脑上运行还是在云端?

它在作者的云端运行。通过互联网连接,无需安装,但你发送的内容会经过作者的服务器。

它还在维护吗?

GitHub 仓库最后更新于–,最新版本(1.0.3)于24天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。它通过 URL 连接,所以接受远程 MCP 服务器的应用也可以使用,例如开启开发者模式的 ChatGPT。

有什么可以替代它?

同一分类中有:Spec Driven Development, Remote Desktop Commander, arr-mcp

替代选择

同一分类中其他作者的服务器,按星标数排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry起步阶段↓ 66/周★ 44014个月前更新

在你的电脑上运行

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander正在增长★ 2113天前更新

在云端运行✓ desktopcommander.app

arr-mcp

One server, 40 tools, the whole media stack: *arrs, Jellyfin, Plex, Seerr, Cleanuparr, downloaders

作者:bardesss非常新今天更新

在你的电脑上运行

作者的 README

仓库中没有找到 README

问 PopNx