Prototyp · Vorschau: alle Server aus der offiziellen Registry, alle 30 Minuten synchronisiert. Bewertungen und Benutzerkonten folgen in einem späteren Schritt.
PopNx MCPMCP-Server für alle, die KI nutzen · in einfachen Worten erklärt
Einsteigermodus An
FarbenSystemHellDunkel
SpracheไทยEnglish中文日本語한국어EspañolDeutsch
☰ MenüEinstellungen
Einsteigermodus An
FarbenSystemHellDunkel
SpracheไทยEnglish中文日本語한국어EspañolDeutsch

Data Prism

von AindriuBVersion 0.7.1i★ –iLäuft auf deinem Computer
Name in der Registryio.github.AindriuB/data-prism

Installieren

Überblick

Beschreibung vom Entwickler (englisches Original)

Fail-closed privacy layer that pseudonymises enterprise API data for LLM agents and MCP clients.

Die drei Säulen von PopNx MCP

Diese drei werden nie zu einer Punktzahl zusammengefasst: Meinungen, Messungen und Beliebtheit sind verschiedene Dinge.

Was du damit machen kannst

Für diesen Server haben wir noch keine Zusammenfassung in einfacher Sprache geschrieben. Unten stehen die Fakten, die wir aus der Registry gelesen haben.

  • Verbindung: Läuft auf deinem Computer
  • Transport: Streamable HTTP
  • Kategorie: Suche & KI-Gedächtnis
  • Das musst du eintragen: LOADER_PATH, DATAPRISM_SECURITY_JWT_ISSUER, DATAPRISM_SECURITY_JWT_AUDIENCE, DATAPRISM_SECURITY_JWT_JWK_SET_URI, DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL, DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES, DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION, DATAPRISM_SECURITY_POLICY_PURPOSES, DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR, DATAPRISM_PRIVACY_PROFILE, DATAPRISM_PRIVACY_SCOPE_LIFETIME, DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID, DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE, DATAPRISM_AUDIT_SINK, DATAPRISM_AUDIT_WRITER_ID, DATAPRISM_METRICS_SINK, DATAPRISM_HAZELCAST_TOPOLOGY, DATAPRISM_SOURCES_CUSTOMER_BASE_URL, DATAPRISM_SOURCES_CUSTOMER_TIMEOUT

Installation

Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.

Bevor du installierst

  • Basischecks: 1 von 1 bestanden
  • Läuft auf deinem Computer mit den Rechten deines Benutzerkontos (Dateien, Netzwerk, Apps).
  • Das trägst du selbst ein: LOADER_PATH, DATAPRISM_SECURITY_JWT_ISSUER, DATAPRISM_SECURITY_JWT_AUDIENCE, DATAPRISM_SECURITY_JWT_JWK_SET_URI, DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI, DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL, DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES, DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION, DATAPRISM_SECURITY_POLICY_PURPOSES, DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR, DATAPRISM_PRIVACY_PROFILE, DATAPRISM_PRIVACY_SCOPE_LIFETIME, DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID, DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE, DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE, DATAPRISM_AUDIT_SINK, DATAPRISM_AUDIT_WRITER_ID, DATAPRISM_AUDIT_FILE_PATH, DATAPRISM_METRICS_SINK, DATAPRISM_HAZELCAST_TOPOLOGY, DATAPRISM_HAZELCAST_CLUSTERNAME, DATAPRISM_HAZELCAST_JOIN_MODE, DATAPRISM_HAZELCAST_JOIN_MEMBERS, DATAPRISM_HAZELCAST_MEMBER_PORT, DATAPRISM_OPERATOR_ENABLED, DATAPRISM_OPERATOR_PORT, DATAPRISM_OPERATOR_REQUIREDAUDIENCE, DATAPRISM_OPERATOR_REQUIREDSCOPE, DATAPRISM_SOURCES_CUSTOMER_BASE_URL, DATAPRISM_SOURCES_CUSTOMER_TIMEOUT

Du brauchst

Welche App nutzt du?

Wähle oben deine App. Wir merken sie uns, damit der Button beim nächsten Mal „In … installieren“ anzeigt.

Öffne Claude Desktop → Settings → Developer → Edit Config und füge dies in claude_desktop_config.json ein

{
  "mcpServers": {
    "data-prism": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "LOADER_PATH",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER",
        "-e",
        "DATAPRISM_SECURITY_JWT_AUDIENCE",
        "-e",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION",
        "-e",
        "DATAPRISM_SECURITY_POLICY_PURPOSES",
        "-e",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR",
        "-e",
        "DATAPRISM_PRIVACY_PROFILE",
        "-e",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE",
        "-e",
        "DATAPRISM_AUDIT_SINK",
        "-e",
        "DATAPRISM_AUDIT_WRITER_ID",
        "-e",
        "DATAPRISM_AUDIT_FILE_PATH",
        "-e",
        "DATAPRISM_METRICS_SINK",
        "-e",
        "DATAPRISM_HAZELCAST_TOPOLOGY",
        "-e",
        "DATAPRISM_HAZELCAST_CLUSTERNAME",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MODE",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS",
        "-e",
        "DATAPRISM_HAZELCAST_MEMBER_PORT",
        "-e",
        "DATAPRISM_OPERATOR_ENABLED",
        "-e",
        "DATAPRISM_OPERATOR_PORT",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT",
        "ghcr.io/aindriub/data-prism-server:0.7.1"
      ],
      "env": {
        "LOADER_PATH": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER": "your-value",
        "DATAPRISM_SECURITY_JWT_AUDIENCE": "your-value",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION": "your-value",
        "DATAPRISM_SECURITY_POLICY_PURPOSES": "your-value",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR": "your-value",
        "DATAPRISM_PRIVACY_PROFILE": "your-value",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE": "your-value",
        "DATAPRISM_AUDIT_SINK": "your-value",
        "DATAPRISM_AUDIT_WRITER_ID": "your-value",
        "DATAPRISM_AUDIT_FILE_PATH": "your-value",
        "DATAPRISM_METRICS_SINK": "your-value",
        "DATAPRISM_HAZELCAST_TOPOLOGY": "your-value",
        "DATAPRISM_HAZELCAST_CLUSTERNAME": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MODE": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS": "your-value",
        "DATAPRISM_HAZELCAST_MEMBER_PORT": "your-value",
        "DATAPRISM_OPERATOR_ENABLED": "your-value",
        "DATAPRISM_OPERATOR_PORT": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT": "your-value"
      }
    }
  }
}

Führe das in deinem Terminal aus

claude mcp add data-prism --env LOADER_PATH=your-value --env DATAPRISM_SECURITY_JWT_ISSUER=your-value --env DATAPRISM_SECURITY_JWT_AUDIENCE=your-value --env DATAPRISM_SECURITY_JWT_JWK_SET_URI=your-value --env DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI=your-value --env DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL=your-value --env DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES=your-value --env DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION=your-value --env DATAPRISM_SECURITY_POLICY_PURPOSES=your-value --env DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR=your-value --env DATAPRISM_PRIVACY_PROFILE=your-value --env DATAPRISM_PRIVACY_SCOPE_LIFETIME=your-value --env DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID=your-value --env DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE=your-value --env DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE=your-value --env DATAPRISM_AUDIT_SINK=your-value --env DATAPRISM_AUDIT_WRITER_ID=your-value --env DATAPRISM_AUDIT_FILE_PATH=your-value --env DATAPRISM_METRICS_SINK=your-value --env DATAPRISM_HAZELCAST_TOPOLOGY=your-value --env DATAPRISM_HAZELCAST_CLUSTERNAME=your-value --env DATAPRISM_HAZELCAST_JOIN_MODE=your-value --env DATAPRISM_HAZELCAST_JOIN_MEMBERS=your-value --env DATAPRISM_HAZELCAST_MEMBER_PORT=your-value --env DATAPRISM_OPERATOR_ENABLED=your-value --env DATAPRISM_OPERATOR_PORT=your-value --env DATAPRISM_OPERATOR_REQUIREDAUDIENCE=your-value --env DATAPRISM_OPERATOR_REQUIREDSCOPE=your-value --env DATAPRISM_SOURCES_CUSTOMER_BASE_URL=your-value --env DATAPRISM_SOURCES_CUSTOMER_TIMEOUT=your-value -- docker run -i --rm -e LOADER_PATH -e DATAPRISM_SECURITY_JWT_ISSUER -e DATAPRISM_SECURITY_JWT_AUDIENCE -e DATAPRISM_SECURITY_JWT_JWK_SET_URI -e DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI -e DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL -e DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES -e DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION -e DATAPRISM_SECURITY_POLICY_PURPOSES -e DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR -e DATAPRISM_PRIVACY_PROFILE -e DATAPRISM_PRIVACY_SCOPE_LIFETIME -e DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID -e DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE -e DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE -e DATAPRISM_AUDIT_SINK -e DATAPRISM_AUDIT_WRITER_ID -e DATAPRISM_AUDIT_FILE_PATH -e DATAPRISM_METRICS_SINK -e DATAPRISM_HAZELCAST_TOPOLOGY -e DATAPRISM_HAZELCAST_CLUSTERNAME -e DATAPRISM_HAZELCAST_JOIN_MODE -e DATAPRISM_HAZELCAST_JOIN_MEMBERS -e DATAPRISM_HAZELCAST_MEMBER_PORT -e DATAPRISM_OPERATOR_ENABLED -e DATAPRISM_OPERATOR_PORT -e DATAPRISM_OPERATOR_REQUIREDAUDIENCE -e DATAPRISM_OPERATOR_REQUIREDSCOPE -e DATAPRISM_SOURCES_CUSTOMER_BASE_URL -e DATAPRISM_SOURCES_CUSTOMER_TIMEOUT ghcr.io/aindriub/data-prism-server:0.7.1

Trag die leeren Werte ein, bevor du ihn startest.

In Cursor öffnen

Oder kopier die Einstellungen selbst

In .cursor/mcp.json in deinem Projekt oder in ~/.cursor/mcp.json einfügen

{
  "mcpServers": {
    "data-prism": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "LOADER_PATH",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER",
        "-e",
        "DATAPRISM_SECURITY_JWT_AUDIENCE",
        "-e",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION",
        "-e",
        "DATAPRISM_SECURITY_POLICY_PURPOSES",
        "-e",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR",
        "-e",
        "DATAPRISM_PRIVACY_PROFILE",
        "-e",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE",
        "-e",
        "DATAPRISM_AUDIT_SINK",
        "-e",
        "DATAPRISM_AUDIT_WRITER_ID",
        "-e",
        "DATAPRISM_AUDIT_FILE_PATH",
        "-e",
        "DATAPRISM_METRICS_SINK",
        "-e",
        "DATAPRISM_HAZELCAST_TOPOLOGY",
        "-e",
        "DATAPRISM_HAZELCAST_CLUSTERNAME",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MODE",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS",
        "-e",
        "DATAPRISM_HAZELCAST_MEMBER_PORT",
        "-e",
        "DATAPRISM_OPERATOR_ENABLED",
        "-e",
        "DATAPRISM_OPERATOR_PORT",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT",
        "ghcr.io/aindriub/data-prism-server:0.7.1"
      ],
      "env": {
        "LOADER_PATH": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER": "your-value",
        "DATAPRISM_SECURITY_JWT_AUDIENCE": "your-value",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION": "your-value",
        "DATAPRISM_SECURITY_POLICY_PURPOSES": "your-value",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR": "your-value",
        "DATAPRISM_PRIVACY_PROFILE": "your-value",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE": "your-value",
        "DATAPRISM_AUDIT_SINK": "your-value",
        "DATAPRISM_AUDIT_WRITER_ID": "your-value",
        "DATAPRISM_AUDIT_FILE_PATH": "your-value",
        "DATAPRISM_METRICS_SINK": "your-value",
        "DATAPRISM_HAZELCAST_TOPOLOGY": "your-value",
        "DATAPRISM_HAZELCAST_CLUSTERNAME": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MODE": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS": "your-value",
        "DATAPRISM_HAZELCAST_MEMBER_PORT": "your-value",
        "DATAPRISM_OPERATOR_ENABLED": "your-value",
        "DATAPRISM_OPERATOR_PORT": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT": "your-value"
      }
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

In VS Code öffnen

Oder kopier die Einstellungen selbst

In .vscode/mcp.json in deinem Projekt einfügen

{
  "servers": {
    "data-prism": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "LOADER_PATH",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER",
        "-e",
        "DATAPRISM_SECURITY_JWT_AUDIENCE",
        "-e",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI",
        "-e",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES",
        "-e",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION",
        "-e",
        "DATAPRISM_SECURITY_POLICY_PURPOSES",
        "-e",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR",
        "-e",
        "DATAPRISM_PRIVACY_PROFILE",
        "-e",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE",
        "-e",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE",
        "-e",
        "DATAPRISM_AUDIT_SINK",
        "-e",
        "DATAPRISM_AUDIT_WRITER_ID",
        "-e",
        "DATAPRISM_AUDIT_FILE_PATH",
        "-e",
        "DATAPRISM_METRICS_SINK",
        "-e",
        "DATAPRISM_HAZELCAST_TOPOLOGY",
        "-e",
        "DATAPRISM_HAZELCAST_CLUSTERNAME",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MODE",
        "-e",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS",
        "-e",
        "DATAPRISM_HAZELCAST_MEMBER_PORT",
        "-e",
        "DATAPRISM_OPERATOR_ENABLED",
        "-e",
        "DATAPRISM_OPERATOR_PORT",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE",
        "-e",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL",
        "-e",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT",
        "ghcr.io/aindriub/data-prism-server:0.7.1"
      ],
      "env": {
        "LOADER_PATH": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER": "your-value",
        "DATAPRISM_SECURITY_JWT_AUDIENCE": "your-value",
        "DATAPRISM_SECURITY_JWT_JWK_SET_URI": "your-value",
        "DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES": "your-value",
        "DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION": "your-value",
        "DATAPRISM_SECURITY_POLICY_PURPOSES": "your-value",
        "DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR": "your-value",
        "DATAPRISM_PRIVACY_PROFILE": "your-value",
        "DATAPRISM_PRIVACY_SCOPE_LIFETIME": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE": "your-value",
        "DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE": "your-value",
        "DATAPRISM_AUDIT_SINK": "your-value",
        "DATAPRISM_AUDIT_WRITER_ID": "your-value",
        "DATAPRISM_AUDIT_FILE_PATH": "your-value",
        "DATAPRISM_METRICS_SINK": "your-value",
        "DATAPRISM_HAZELCAST_TOPOLOGY": "your-value",
        "DATAPRISM_HAZELCAST_CLUSTERNAME": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MODE": "your-value",
        "DATAPRISM_HAZELCAST_JOIN_MEMBERS": "your-value",
        "DATAPRISM_HAZELCAST_MEMBER_PORT": "your-value",
        "DATAPRISM_OPERATOR_ENABLED": "your-value",
        "DATAPRISM_OPERATOR_PORT": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDAUDIENCE": "your-value",
        "DATAPRISM_OPERATOR_REQUIREDSCOPE": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_BASE_URL": "your-value",
        "DATAPRISM_SOURCES_CUSTOMER_TIMEOUT": "your-value"
      }
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

Dieser Server läuft auf deinem Computer, und ChatGPT kann sich nur mit Servern im Internet verbinden. Wähle eine andere App.

Deine Auswahl bleibt in einem Cookie auf diesem Gerät; kein Konto nötig.

Werte, die du selbst einträgst

  • LOADER_PATH erforderlich env
    Directory Spring Boot's PropertiesLauncher scans for extension jars; already set to /app/adapters by the image, but startup still fails with MISSING_SOURCE_ADAPTER until you bind-mount a reviewed Dat…
  • DATAPRISM_SECURITY_JWT_ISSUER erforderlich env
    OAuth2/OIDC issuer that mints the caller's JWT; required for every protected deployment
  • DATAPRISM_SECURITY_JWT_AUDIENCE erforderlich env
    Expected JWT audience claim for this deployment; required for every protected deployment
  • DATAPRISM_SECURITY_JWT_JWK_SET_URI erforderlich env
    HTTPS JWKS location used to verify caller JWTs; exactly one of this or DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI is required, never both
  • DATAPRISM_SECURITY_JWT_ISSUER_DISCOVERY_URI env
    Alternative HTTPS OIDC issuer-discovery location; set this instead of DATAPRISM_SECURITY_JWT_JWK_SET_URI, never both
  • DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL erforderlich env
    JWT claim name that carries the caller's principal identifier; required, must differ from the roles and investigation claims
  • DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES erforderlich env
    JWT claim name that carries the caller's roles; required, must differ from the principal and investigation claims
  • DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION erforderlich env
    JWT claim name that carries the trusted investigation/case identifier; required, must differ from the principal and roles claims
  • DATAPRISM_SECURITY_POLICY_PURPOSES erforderlich env
    Comma-separated list of permitted purposes; at least one is required
  • DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR erforderlich env
    Example only — declare DATAPRISM_SECURITYPOLICY_ROLES_ per operator-defined role (no underscore between SECURITY and POLICY: Spring Boot's map-key enumeration under a hyphenated dataprism.security-po…
  • DATAPRISM_PRIVACY_PROFILE erforderlich env
    Name of the reviewed privacy profile implementation to apply; required
  • DATAPRISM_PRIVACY_SCOPE_LIFETIME erforderlich env
    Positive duration (e.g. 8h) a privacy scope's synthetic identities remain valid; required
  • DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID erforderlich env
    Identifier of the pinned HMAC key used to derive synthetic identities; required
  • DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE erforderlich env
    Name of the environment variable holding the HMAC key material; exactly one of this or DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE is required, never both, and never a literal key value
  • DATAPRISM_PRIVACY_HMAC_KEY_PROVIDER_REFERENCE env
    Reference to an approved secret provider holding the HMAC key material; set this instead of DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE, never both
  • DATAPRISM_AUDIT_SINK erforderlich env
    Audit sink implementation: one of approved-sink, slf4j, hash-chained; required, never downgraded to no-op
  • DATAPRISM_AUDIT_WRITER_ID erforderlich env
    Writer/instance identity recorded on every audit entry; required
  • DATAPRISM_AUDIT_FILE_PATH env
    Path to the durable, hash-chained audit log; required when DATAPRISM_AUDIT_SINK=hash-chained, refused as MISSING_AUDIT_FILE_PATH if absent for that sink, ignored otherwise
  • DATAPRISM_METRICS_SINK erforderlich env
    Metrics sink binding, currently only micrometer; required in production, never the framework no-op
  • DATAPRISM_HAZELCAST_TOPOLOGY erforderlich env
    Cluster read-budget topology: embedded (shared across members that have joined one cluster; set cluster name and join mode) or single-node (enforced per process); required, never defaulted
  • DATAPRISM_HAZELCAST_CLUSTERNAME env
    Hazelcast cluster name; required when DATAPRISM_HAZELCAST_TOPOLOGY=embedded, never dev, refused if set with single-node
  • DATAPRISM_HAZELCAST_JOIN_MODE env
    How cluster members find each other: tcp-ip, kubernetes or none; required when DATAPRISM_HAZELCAST_TOPOLOGY=embedded (none is an explicit single member bound to 127.0.0.1), refused if set with single…
  • DATAPRISM_HAZELCAST_JOIN_MEMBERS env
    Comma-separated member addresses (host or host:port); required when DATAPRISM_HAZELCAST_JOIN_MODE=tcp-ip, otherwise unused
  • DATAPRISM_HAZELCAST_MEMBER_PORT env
    Hazelcast member port, default 5701, never auto-incremented; must differ from the server, management and operator ports. Member traffic is unencrypted, so keep it on a private network. Optional
  • DATAPRISM_OPERATOR_ENABLED env
    Enables the operator surface; optional, off by default
  • DATAPRISM_OPERATOR_PORT env
    Port of the operator listener; required when DATAPRISM_OPERATOR_ENABLED=true, must differ from the server, management (OPERATOR_PORT_SHARED otherwise) and member ports, and has no fixed default (publ…
  • DATAPRISM_OPERATOR_REQUIREDAUDIENCE env
    JWT audience an operator token must carry; required when DATAPRISM_OPERATOR_ENABLED=true
  • DATAPRISM_OPERATOR_REQUIREDSCOPE env
    JWT scope an operator token must carry; required when DATAPRISM_OPERATOR_ENABLED=true
  • DATAPRISM_SOURCES_CUSTOMER_BASE_URL erforderlich env
    Example only — declare DATAPRISM_SOURCES_ _BASE_URL (HTTPS) per configured source; at least one source, each with its own reviewed DataSourceAdapter bean, is required
  • DATAPRISM_SOURCES_CUSTOMER_TIMEOUT erforderlich env
    Example only — declare DATAPRISM_SOURCES_ _TIMEOUT (positive duration) per configured source; required alongside its base URL

Diese Einstellungen werden aus dem Registry-Eintrag des Entwicklers erzeugt. Wenn in der README etwas anderes steht, folge der README.

Was er kann

Läuft auf deinem Computer; die Tool-Liste erscheint nach der Installation in deiner KI-App.

Basischecksi

Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 6. Nov. 2026

  • ✓ Bestanden

    Entwickler passt zum Repo

    Der Registry-Name wurde mit dem GitHub-Konto AindriuB bestätigt, dem das Repo gehört

  • … Noch nicht geprüft

    Wird noch gepflegt

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • … Noch nicht geprüft

    Hat eine Lizenz

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • – Nicht zutreffend

    Endpunkt antwortet

    Dieser Server läuft auf deinem Computer; es gibt keinen Endpunkt im Internet

  • – Nicht zutreffend

    Anmeldung mit OAuth

    Läuft auf deinem Computer und nutzt stattdessen lokale Einstellungen

  • … Noch nicht geprüft

    Keine versteckten Anweisungen in Tool-Beschreibungen

    Läuft auf deinem Computer; Tool-Listen können wir nur von Endpunkten im Internet lesen

Im Vergleich mit anderen in Suche & KI-Gedächtnisi

  • Mehr Sterne als 0 % der anderen 7243 Server in dieser Kategorie
  • Neuer in der Registry veröffentlicht als 72 % der anderen 7243 Server in dieser Kategorie
  • Basischecks gleich gut wie oder besser als bei 100 % der anderen 7243 Server in dieser Kategorie

Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.

Häufige Fragen

Ist Data Prism sicher?

Er hat 1 von 1 zutreffenden Basischecks bestanden. Den Code haben wir nicht gelesen. Bevor du einen Schlüssel oder Token hinzufügst, sieh nach, welche Zugriffe der Server verlangt, und nutze einen Schlüssel, der nur die Berechtigungen hat, die du brauchst.

Welche Schlüssel oder Codes braucht er?

Das musst du eintragen: LOADER_PATH, DATAPRISM_SECURITY_JWT_ISSUER, DATAPRISM_SECURITY_JWT_AUDIENCE, DATAPRISM_SECURITY_JWT_JWK_SET_URI, DATAPRISM_SECURITY_CALLER_CLAIMS_PRINCIPAL, DATAPRISM_SECURITY_CALLER_CLAIMS_ROLES, DATAPRISM_SECURITY_CALLER_CLAIMS_INVESTIGATION, DATAPRISM_SECURITY_POLICY_PURPOSES, DATAPRISM_SECURITYPOLICY_ROLES_INVESTIGATOR, DATAPRISM_PRIVACY_PROFILE, DATAPRISM_PRIVACY_SCOPE_LIFETIME, DATAPRISM_PRIVACY_HMAC_KEY_KEY_ID, DATAPRISM_PRIVACY_HMAC_KEY_ENVIRONMENT_VARIABLE, DATAPRISM_AUDIT_SINK, DATAPRISM_AUDIT_WRITER_ID, DATAPRISM_METRICS_SINK, DATAPRISM_HAZELCAST_TOPOLOGY, DATAPRISM_SOURCES_CUSTOMER_BASE_URL, DATAPRISM_SOURCES_CUSTOMER_TIMEOUT

Läuft er auf meinem Computer oder in der Cloud?

Er läuft auf deinem Computer. Deine KI-App startet ihn bei Bedarf, und die Daten laufen nicht über die Server des Entwicklers (außer der Server ruft selbst einen Onlinedienst auf).

Wird er noch gepflegt?

Das GitHub-Repo wurde zuletzt – geändert, und die neueste Version (0.7.1) kam vor 15 Tagen in die Registry.

Welche Apps können ihn nutzen?

Apps, die MCP unterstützen, etwa Claude Desktop, Claude Code, Cursor und VS Code. Außerdem brauchst du Docker auf deinem Computer.

Was kann ich stattdessen nutzen?

In derselben Kategorie: Context7, Codebase Memory, Exa

Alternativen

Server derselben Kategorie von anderen Entwicklern, sortiert nach Sternen.

So liest du eine Karte:★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti

Context7

von upstash

Up-to-date docs for AI agents

Computer oder Cloud★ 64.224MITAktualisiert vor 3 Tagen
Installieren

Codebase Memory

von DeusData

Codebase knowledge graph for AI agents — 162 languages, sub-ms queries, 99% fewer tokens.

Läuft auf deinem Computer★ 48.148MITAktualisiert vor 20 Tagen
Installieren

Exa

von exa-labs

Connect AI agents to Exa for web search, content fetching, and multi-step research.

Läuft in der Cloud★ 5.213MITAktualisiert vor 44 Tagen
Installieren

README vom Entwickler

README öffnen

Unverändert aus dem Repo des Entwicklers übernommen. PopNx MCP hat den Inhalt weder geprüft noch empfiehlt es ihn. HTML, Bilder und Skripte wurden entfernt. Links führen von dieser Website weg.

Data Prism

Fail-closed privacy layer that pseudonymises enterprise API data for LLM agents and MCP clients.

Data Prism is an open-source privacy layer for Java/Spring teams putting LLM agents or MCP clients in front of internal APIs holding customer data. It pseudonymises personal data per privacy scope, refuses anything unclassified, and can keep a hash-chained audit trail.

What it is. A privacy enforcement layer for enterprise AI. It gives LLM agents useful, correlated business context — one consistent synthetic identity per entity within a privacy scope — while controlling which personal data crosses the AI boundary, and in what form.

Who it's for. Java/Spring platform and backend teams putting LLM agents or MCP clients in front of internal APIs that hold customer data. If nothing you run exposes personal data to a model, you don't need this.

Status: the walking skeleton and every slice through S9a are built, with 18 Maven submodules (19 Maven projects in the reactor counting the root pom-packaged aggregator itself) and a passing test suite. The privacy engine, correlation and consistency findings, parallel mTLS connectors, an embedded Hazelcast identity cache and read budget (shared only across members that have joined one cluster; see multiple instances), an OAuth2 resource server with session-derived PrivacyContext, audit and metrics are all real and exercised end to end. The standalone server is the primary deployment surface; the Spring Boot starter is the embedded option. A one-command local Compose quickstart also exists: see "Try it" below. Two MCP tools ship today, get_entity_context and compare_entity_sources — the other two named in the design review, search_entity_data and describe_entity_model, are not yet built (docs/tools.md "Not yet built"). A durable, append-only, hash-chained audit sink and an offline AuditChainVerifier ship as of 0.3.0, opt-in via dataprism.audit.sink: hash-chained; the verifier catches an edit or deletion inside a writer's chain, but cannot detect truncation of a writer's most recent records or the deletion of a whole process boot's records, and the trail does not resist an operator, or anyone else, who already has write access to the file (docs/audit.md "What this does and does not prove"). Not built: the re-identification operator surface (deferred past V1 by decision, see docs/architecture.md#decisions-worth-knowing) and the Elasticsearch connector and its search tools. See docs/plan/PLAN.md for what is open.

The problem

An organisation wants an LLM to investigate live business data spread across several systems. Giving the model direct API access is not acceptable: those APIs carry personal and confidential data, each system represents the same entity differently, and raw identifiers let anything downstream correlate across sessions.

The obvious fix — redact everything sensitive — destroys the investigation. Once three systems' names for one person are all [REDACTED], the model cannot tell whether it is looking at one person or three.

What Data Prism does

It sits between the two and does two things that are easy to confuse:

It makes identity consistent. One subject gets one synthetic identity across every source, derived deterministically from (scope, subject, namespace, algorithm version, key) — never random, never stored in plaintext, and reproducible without the cache. The same person in three systems reads as one person to the model.

It leaves the data inconsistent, and says so. If those three systems disagree about a name, the answer carries a finding that says they disagree. The platform never makes enterprise data look cleaner than it is. That distinction is the point of the project:

Identity representation becomes consistent. Underlying data inconsistencies

become *more* visible, not less.

Pseudonyms are scoped. The same person in two different investigations gets two different synthetic identities, so nothing correlates across cases by accident.

What it is not

Not an API gateway, not an ETL platform, not a master-data system, not an identity provider, and not an entity-resolution engine — correlation requires a key the sources already share, behind a documented SPI. It carries no business domain: no Customer, Taxpayer or Employee type exists outside the example application.

It is not anonymisation. Under GDPR Art. 4(5), pseudonymised data is still personal data. Sending Data Prism output to a third-party model is still processing, and still needs a lawful basis, a DPIA, and a transfer mechanism where the provider is outside the EU. The platform reduces exposure; it does not remove the obligation.

Try it

The fastest way to see a real MCP call answered by the real privacy engine — no local JDK, no Maven install, one command:

docker compose up

pulls the published ghcr.io/aindriub/data-prism-quickstart- images (pin one with QUICKSTART_IMAGE_TAG=0.7.0; run docker compose -f compose.yaml -f compose.build.yaml up --build instead to build every image from source) and brings up the standalone server, a synthetic fixture API and a local HTTPS JWT issuer, proving an agent-compatible get_entity_context call returns a pseudonymised response. Walk through it in docs/quickstart.md; connect your own agent client to either that stack or a real deployment via docs/agents/.

Once you have seen the demo, protect your own API: docs/quickstart.md ends with a "What next" section pointing at docs/protect-your-own-api.md, a YAML-only walkthrough from a real JSON REST API to a working get_entity_context call.

If you found this on the MCP registry

The ghcr.io/aindriub/data-prism-server image listed there is published as a multi-architecture manifest list covering linux/amd64 and linux/arm64, each built and verified natively — docker run on Apple Silicon or any other arm64 host pulls the arm64 image directly, no emulation required.

It is not a one-command install, on either architecture. docker run alone yields a server that refuses to start: DataPrismContractValidator demands a reviewed DataSourceAdapter bean for every configured source, and DataPrismProperties.validate() demands a full deployment configuration (JWT issuer/audience/JWKS, caller-claim mappings, security policy, HMAC key reference, audit sink, metrics sink, Hazelcast topology). Neither ships in the image. Two things an operator must supply themselves before it serves anything:

  • A reviewed `DataSourceAdapter` (and `IdentityResolver`) jar for each API you are protecting, mounted onto the image's loader path.
  • A deployment configuration satisfying the dataprism.* vocabulary.

docs/configuration.md is the authoritative, complete contract for both. The "Try it" section above is a local Compose fixture for evaluation, not this image or that configuration.

Documentation

The full set of user docs is also published, rendered and searchable, at https://aindriub.github.io/data-prism/.

User docs

Each row links the site page and the repo file it is built from.

DocSiteWhat it covers
docs/quickstart.mdquickstart/One-command local Compose demonstration — start here
docs/protect-your-own-api.mdprotect-your-own-api/Pointing Data Prism at your own API instead of the fixture
docs/configuration.mdconfiguration/The authoritative, complete dataprism.* deployment configuration contract
docs/tools.mdtools/What each shipped MCP tool takes and returns, worked examples
docs/extending.mdextending/Protecting a new source: a reviewed Java adapter, or the configuration-driven JSON REST mode
docs/audit.mdaudit/What the hash-chained audit trail records, and how to verify it
docs/architecture.mdarchitecture/Module map, dependency rules, the boundaries that must not be crossed, dated decisions
docs/agents/agents/Connecting an MCP agent client, local fixture or authenticated remote
docs/agents/stdio.mdagents/stdio/The local stdio fixture workflow: a real MCP tool call with no JWT, network call or source system
docs/agents/remote-http.mdagents/remote-http/The authenticated Streamable HTTP workflow against a real MCP endpoint; no development bypass
docs/faq.mdfaq/Direct answers on pseudonymisation, PII detection, Java requirements, the audit trail and prompt injection
docs/comparison.mdcomparison/How Data Prism compares to Presidio, LLM Guard, NeMo Guardrails and MCP gateways or proxies
docs/use-cases/pseudonymise-customer-data-spring-boot.mduse-cases/pseudonymise-customer-data-spring-boot/Pseudonymising customer data from a Spring Boot API before an LLM agent sees it
docs/use-cases/gdpr-data-minimisation-mcp.mduse-cases/gdpr-data-minimisation-mcp/GDPR data minimisation for MCP tools
docs/use-cases/consistent-pseudonyms-across-systems.mduse-cases/consistent-pseudonyms-across-systems/Keeping one customer recognisable across systems without exposing identity
CHANGELOG.mdchangelog/Every notable Data Prism change by version, in Keep a Changelog format
Internal / project working docs

Not published on the site.

DocWhat it covers
docs/design-review.mdAmendments to the specification, with reasoning. Authoritative
docs/development-plan.mdSlice order, sizing, and the decisions that block the first one
docs/pack.mdThe original specification. Superseded and historical; describes tools that were never built

| [docs/conventions.md](docs/conventio

Nur der Anfang wird gezeigt; den Rest findest du im Repo

PopNx fragen