Prototyp · Vorschau: alle Server aus der offiziellen Registry, alle 30 Minuten synchronisiert. Bewertungen und Benutzerkonten folgen in einem späteren Schritt.
PopNx MCPMCP-Server für alle, die KI nutzen · in einfachen Worten erklärt

Nankai Trough

von mrslbtVersion 0.2.1i★ –iLäuft auf deinem Computer
Name in der Registryio.github.mrslbt/nankai-trough

Installieren

Überblick

Beschreibung vom Entwickler (englisches Original)

Nankai Trough earthquake hazard & building-safety, from official Japan data. No verdicts.

Die drei Säulen von PopNx MCP

Diese drei werden nie zu einer Punktzahl zusammengefasst: Meinungen, Messungen und Beliebtheit sind verschiedene Dinge.

Was du damit machen kannst

Für diesen Server haben wir noch keine Zusammenfassung in einfacher Sprache geschrieben. Unten stehen die Fakten, die wir aus der Registry gelesen haben.

  • Verbindung: Läuft auf deinem Computer
  • Transport: stdio
  • Kategorie: Sonstiges

Installation

Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.

Bevor du installierst

  • Basischecks: 1 von 1 bestanden
  • Läuft auf deinem Computer mit den Rechten deines Benutzerkontos (Dateien, Netzwerk, Apps).
  • Die Registry nennt keinen Schlüssel zum Eintragen.

Du brauchst

  • npmNode.js installiert (für den Befehl npx)

Welche App nutzt du?

Wähle oben deine App. Wir merken sie uns, damit der Button beim nächsten Mal „In … installieren“ anzeigt.

Öffne Claude Desktop → Settings → Developer → Edit Config und füge dies in claude_desktop_config.json ein

{
  "mcpServers": {
    "nankai-trough": {
      "command": "npx",
      "args": [
        "-y",
        "nankai-trough-mcp"
      ]
    }
  }
}

Führe das in deinem Terminal aus

claude mcp add nankai-trough -- npx -y nankai-trough-mcp

In Cursor öffnen

Oder kopier die Einstellungen selbst

In .cursor/mcp.json in deinem Projekt oder in ~/.cursor/mcp.json einfügen

{
  "mcpServers": {
    "nankai-trough": {
      "command": "npx",
      "args": [
        "-y",
        "nankai-trough-mcp"
      ]
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

In VS Code öffnen

Oder kopier die Einstellungen selbst

In .vscode/mcp.json in deinem Projekt einfügen

{
  "servers": {
    "nankai-trough": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "nankai-trough-mcp"
      ]
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

Dieser Server läuft auf deinem Computer, und ChatGPT kann sich nur mit Servern im Internet verbinden. Wähle eine andere App.

Deine Auswahl bleibt in einem Cookie auf diesem Gerät; kein Konto nötig.

Diese Einstellungen werden aus dem Registry-Eintrag des Entwicklers erzeugt. Wenn in der README etwas anderes steht, folge der README.

Was er kann

Läuft auf deinem Computer; die Tool-Liste erscheint nach der Installation in deiner KI-App.

Basischecksi

Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 8. Nov. 2026

  • ✓ Bestanden

    Entwickler passt zum Repo

    Der Registry-Name wurde mit dem GitHub-Konto mrslbt bestätigt, dem das Repo gehört

  • … Noch nicht geprüft

    Wird noch gepflegt

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • … Noch nicht geprüft

    Hat eine Lizenz

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • – Nicht zutreffend

    Endpunkt antwortet

    Dieser Server läuft auf deinem Computer; es gibt keinen Endpunkt im Internet

  • – Nicht zutreffend

    Anmeldung mit OAuth

    Läuft auf deinem Computer und nutzt stattdessen lokale Einstellungen

  • … Noch nicht geprüft

    Keine versteckten Anweisungen in Tool-Beschreibungen

    Läuft auf deinem Computer; Tool-Listen können wir nur von Endpunkten im Internet lesen

Im Vergleich mit anderen in Sonstigesi

  • Mehr Sterne als 0 % der anderen 18398 Server in dieser Kategorie
  • Neuer in der Registry veröffentlicht als 59 % der anderen 18398 Server in dieser Kategorie
  • Basischecks gleich gut wie oder besser als bei 100 % der anderen 18398 Server in dieser Kategorie

Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.

Häufige Fragen

Ist Nankai Trough sicher?

Er hat 1 von 1 zutreffenden Basischecks bestanden. Den Code haben wir nicht gelesen. Bevor du einen Schlüssel oder Token hinzufügst, sieh nach, welche Zugriffe der Server verlangt, und nutze einen Schlüssel, der nur die Berechtigungen hat, die du brauchst.

Welche Schlüssel oder Codes braucht er?

Die Registry nennt keinen erforderlichen Schlüssel, manche Server bitten dich aber bei der ersten Nutzung, dich anzumelden.

Läuft er auf meinem Computer oder in der Cloud?

Er läuft auf deinem Computer. Deine KI-App startet ihn bei Bedarf, und die Daten laufen nicht über die Server des Entwicklers (außer der Server ruft selbst einen Onlinedienst auf).

Wird er noch gepflegt?

Das GitHub-Repo wurde zuletzt – geändert, und die neueste Version (0.2.1) kam vor 33 Tagen in die Registry.

Welche Apps können ihn nutzen?

Apps, die MCP unterstützen, etwa Claude Desktop, Claude Code, Cursor und VS Code. Außerdem brauchst du Node.js auf deinem Computer.

Was kann ich stattdessen nutzen?

In derselben Kategorie: Spec Driven Development, Remote Desktop Commander, Tethered Trust

Alternativen

Server derselben Kategorie von anderen Entwicklern, sortiert nach Sternen.

So liest du eine Karte:★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti

Spec Driven Development

von formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

Läuft auf deinem Computer★ 440MITAktualisiert vor 14 Monaten
Installieren

Remote Desktop Commander

von desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

Läuft in der Cloud★ 211Aktualisiert vor 3 Tagen
Installieren

Tethered Trust

von tetheredtrust.com

Fit, compatibility and recall checks for AI agents before they buy: verdicts, evidence, receipts.

Läuft in der CloudAktualisiert heute
Installieren

README vom Entwickler

README öffnen

Unverändert aus dem Repo des Entwicklers übernommen. PopNx MCP hat den Inhalt weder geprüft noch empfiehlt es ihn. HTML, Bilder und Skripte wurden entfernt. Links führen von dieser Website weg.

nankai-trough-mcp

Nankai Trough (南海トラフ地震) earthquake hazard and building-safety engine for AI assistants. Ask "how bad is the Nankai Trough quake, how far does it reach, and what does that mean for a house built in 1978?" and get official Japanese government figures, every one cited and dated, with a route to the official maps for your exact address. It never tells you you're "safe."

It reports what 内閣府 (Cabinet Office), 地震本部, 気象庁, and 国土交通省 actually publish, and where a figure isn't verifiable, it points you at the source instead of inventing one. Bilingual EN/JA. Runs locally, no API keys.

Live companion map: https://nankaitrough.bymarsel.me (this is the open data engine behind it, the same official data as an explorable map).

⚠️ Not a prediction, not a verdict. This explains official data and routes you to official guidance and a professional seismic diagnosis (耐震診断). Always confirm with your municipality and official hazard maps. In an emergency, follow official evacuation instructions.

Why it exists

Most people underestimate the *reach*. The 30-year probability was revised by 地震本部 in September 2025 away from the old single "80%" to a two-model range (60–90%+ (higher model) / 20–50%). Intensity-7 shaking is projected across 10 prefectures, and 764 municipalities in 31 prefectures face major shaking or a 3 m+ tsunami. "I'm inland, so I'm fine" is exactly the assumption this corrects.

The authoritative data is real, but it's scattered across five agencies and mostly buried in PDFs. This server makes it cited and usable from an AI assistant, without ever inventing a number.

The attitude: assume the worst

The earthquake is unknown, and claiming we know is an illusion. So the refusal here is one-directional: the tools will alarm you with official numbers, and they will never reassure you.

Where the official model publishes several cases, the severe one leads. A low probability is reported as a floor, not a ceiling, and is never relayed as good news. location_probability will tell you the government puts your mesh at a 12% chance of 震度6強 in 30 years; it will not tell you that means you are fine.

If you cannot write Japanese

The official geocoder only reads Japanese addresses, which would have excluded the people this server is for. Give a 7-digit postal code instead and every address-taking tool resolves it through Japan Post data:

232-0063        2320063        〒232-0063

That lands on the centre of your postal district rather than your building, and the tools say so in the response rather than pretending to more precision than they have. All output is available in English with language: "en".

Data rules

  • No verdicts. It reports official figures + plain-language meaning, never "your home is safe/unsafe."
  • Every figure cites its official source + date. If a value isn't verifiable in a primary source, it points to the source instead of guessing.
  • Probabilistic ≠ scenario. J-SHIS (all-source probability) is never presented as the Nankai scenario (Cabinet Office).
  • Building safety can't be looked up. It's classified from the build year + structure *you* provide. No fabricated per-building data.

Install

claude mcp add nankai -- npx -y nankai-trough-mcp
JSON config

The server config is the same across clients; only the file path differs.

Claude Code: ~/.claude/.mcp.json

{

"mcpServers": { "nankai": { "command": "npx", "args": ["-y", "nankai-trough-mcp"] } } }

Cursor: ~/.cursor/mcp.json

{

"mcpServers": { "nankai": { "command": "npx", "args": ["-y", "nankai-trough-mcp"] } } }

VS Code (GitHub Copilot): .vscode/mcp.json

{

"servers": { "nankai": { "type": "stdio", "command": "npx", "args": ["-y", "nankai-trough-mcp"] } } }

Claude Desktop: claude_desktop_config.json

{

"mcpServers": { "nankai": { "command": "npx", "args": ["-y", "nankai-trough-mcp"] } } }

Config path:

  • macOS: ~/Library/Application Support/Claude/claude_desktop_config.json
  • Windows: %APPDATA%\Claude\claude_desktop_config.json
From source
git clone https://github.com/mrslbt/nankai-trough-mcp.git

cd nankai-trough-mcp npm install && npm run build

Point the client config at the built entry:

{ "command": "node", "args": ["/absolute/path/to/nankai-trough-mcp/dist/index.js"] }

Tools

ToolDescription
nankai_overviewThe official 2025 scenario's scale and reach (probability, casualties, intensity-7 reach, tsunami), each with its source. Start here.
official_hazard_mapsAddress → links to the official per-address hazard maps, where the exact predicted intensity and tsunami live. This server bridges; it doesn't invent those numbers.
building_seismic_checkBuild year + structure → 旧耐震 / 新耐震 / 2000-standard classification with context. Not a verdict.
taishin_subsidy_guideRoutes to subsidised, often-free 耐震診断 / 耐震補強 programs and the national support framework.
shindo_meaningWhat a JMA intensity (震度 5弱–7) means for people and buildings, on the official 気象庁 scale.
location_probabilityAddress → the official J-SHIS 30-year probability of reaching each JMA intensity at that ~250m mesh, severe case first. All-source probabilistic (地震本部), not the Nankai scenario. Reported, never computed.
preparedness_planHousehold details → a sourced plan: stockpile sized to the official one-week guidance, what to do now, what to do when it shakes, and the structural route. An officially recommended floor, not a verdict on survival.
geocode_addressAddress → coordinates via the GSI geocoder. Utility.

Prompts: assess_home_earthquake_risk, nankai_briefing.

Resources

Read-only reference documents a client can list and read without a tool call. Each is rendered from the same data the tools use, so they never drift out of sync.

ResourceContent
nankai://sourcesThe official source registry: every agency cited, with URL, plus the standing disclaimer.
nankai://headline-figuresThe 2025 scenario's headline figures, each with source, as-of date, and notes.
nankai://shindo-scaleThe JMA intensity scale (震度 5弱–7): what each level means for people and buildings.
nankai://building-standardsThe 1981 新耐震 / 2000 wooden-house boundaries + 2016 Kumamoto field-damage data.

Example prompts

Brief me on the Nankai Trough earthquake: the scale, the reach, and what

intensity 7 actually means for a building.

My house is in 高知市本町. Give me the official hazard maps for my address's predicted shaking and tsunami.

I live in a wooden house built in 1978. What seismic standard is that under, and what should I do about it? Don't tell me whether it's safe.

Walk me through assessing my home's earthquake risk: 静岡市葵区追手町9-6, built 1990, reinforced concrete.

Scope

This server does not compute its own per-address values. Two different things follow from that:

  • It reports official published per-mesh probabilities (location_probability, J-SHIS Y2024). Surfacing a government figure is not inventing one.
  • It bridges to the official maps for the Nankai scenario at an address (official_hazard_maps). That data lives in bulk Cabinet Office GIS files needing an ingestion pipeline, and faking it is not on the table.

Headline figures (and where they come from)

Every figure below is verified against the primary government source and carries an as-of date in the tool output. See src/data/nankai.ts for the full verification log.

FigureValueSource
30-year probabilityTwo models since the 2025-09-26 revision: 60–90%+ / 20–50%. Act on the higher.地震本部
Worst-case deaths~298,000 (upper bound, flood defenses functioning)内閣府 2025-03
Economic loss~¥270兆 (¥224.9兆 direct + ¥45.4兆 production); ~¥292兆 incl. transport disruption内閣府 2025-03
Intensity 7Across 10 prefectures内閣府 2025-03
Reach764 municipalities in 31 prefectures at 震度6弱以上 or 津波3m以上内閣府 2025-03
Tsunami5 m+ within minutes on the fastest coasts; max ~34 m (高知), ~31 m (静岡)内閣府 / 気象庁

Sources & license

Official data is used as derived output with attribution; raw government files are never re-hosted.

出典:内閣府 南海トラフの巨大地震モデル・被害想定検討会 / 地震調査研究推進本部 / 気象庁 / 国土交通省(住まいの耐震化)/ 国土地理院(地理院タイル・ジオコーディング)/ 住宅リフォーム推進協議会。

日本語

南海トラフ地震のハザードと建物の耐震性を、公的データだけで扱うMCPサーバーです。内閣府・地震本部・気象庁・国土交通省の公表値を、出典と日付つきで提示し、あなたの住所の正確な想定震度・津波は公式ハザードマップへ橋渡しします。建物の安全性は「安全/危険」と判定せず、建築年と構造から耐震基準の世代を示し、耐震診断・補助制度へ案内します。ローカル動作、APIキー不要。

Disclaimer

This server surfaces official Japanese government data and explanations. It is not a prediction, not a verdict on whether you or your home are safe, and not a substitute for official evacuation guidance or a professional seismic diagnosis (耐震診断). Figures are approximate and as reported by their official sources; always confirm at the source. Unofficial, not affiliated with any government agency.

License

MIT


More MCPs

MCPWhat it does
Japan DesignEnforces Japanese UI + UX conventions on real CSS/markup
ripprYouTube transcript ripper for humans and AI agents
RakutenSearch Rakuten's marketplace, books, and hotels

Built by Marsel Bait in Tokyo

PopNx fragen