SnapEX Pay

Was du damit machen kannst

Für diesen Server haben wir noch keine Zusammenfassung in einfacher Sprache geschrieben. Unten stehen die Fakten, die wir aus der Registry gelesen haben.

• Verbindung: Computer oder Cloud
• Transport: stdio, Streamable HTTP
• Kategorie: Sonstiges
• Das musst du eintragen: SNAPEX_API_KEY, Authorization

Installation

Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.

Du brauchst

• Läuft in der CloudNichts zu installieren; die Verbindung läuft übers Internet
• npmNode.js installiert (für den Befehl npx)

Welche App nutzt du?

{
  "mcpServers": {
    "pay": {
      "command": "npx",
      "args": [
        "-y",
        "snapex-pay-mcp"
      ],
      "env": {
        "SNAPEX_API_KEY": "your-value",
        "SNAPEX_BASE_URL": "your-value"
      }
    }
  }
}

claude mcp add --transport http pay https://pay.snapex.pro/mcp --header 'Authorization: your-value'

claude mcp add pay --env SNAPEX_API_KEY=your-value --env SNAPEX_BASE_URL=your-value -- npx -y snapex-pay-mcp

{
  "mcpServers": {
    "pay": {
      "url": "https://pay.snapex.pro/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

{
  "mcpServers": {
    "pay": {
      "command": "npx",
      "args": [
        "-y",
        "snapex-pay-mcp"
      ],
      "env": {
        "SNAPEX_API_KEY": "your-value",
        "SNAPEX_BASE_URL": "your-value"
      }
    }
  }
}

{
  "servers": {
    "pay": {
      "type": "http",
      "url": "https://pay.snapex.pro/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

{
  "servers": {
    "pay": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "snapex-pay-mcp"
      ],
      "env": {
        "SNAPEX_API_KEY": "your-value",
        "SNAPEX_BASE_URL": "your-value"
      }
    }
  }
}

Deine Auswahl bleibt in einem Cookie auf diesem Gerät; kein Konto nötig.

Werte, die du selbst einträgst

• SNAPEX_API_KEY geheim env
  Merchant API key (smk_…). Optional: create_account makes one and saves it to ~/.config/snapex-pay/credentials.json.
• SNAPEX_BASE_URL env
  API base URL.
• Authorization geheim HTTP header
  Optional: "Bearer smk_…" merchant API key. Without it the agent calls create_account and the session goes on with the new key.

Diese Einstellungen werden aus dem Registry-Eintrag des Entwicklers erzeugt. Wenn in der README etwas anderes steht, folge der README.

Was er kann

Tool-Namen und -Beschreibungen genau so, wie der Server sie am 6. Nov. 2026 gemeldet hat. Geschrieben hat sie der Entwickler, nicht wir; wir zeigen sie als reinen Text.

• create_account

  Opens a new SnapEX Pay merchant account for you and returns a merchant API key with every scope (receive, pay out, convert, webhooks). No captcha, no email confirmation, no person needed. Call it once, only when you have no key yet (other tools answer "unauthorized"). On this MCP

• get_account

  Returns the account behind the API key in use: login, the key prefix and scopes, cabinet_url for a person and mcp_personal_url (a secret MCP URL with this key built in, for clients that cannot send headers). Use it to check you are connected to the right account.

• list_assets

  Lists the coins and networks SnapEX Pay works with now: asset_id (the code other tools take), symbol, network, decimals, price_usd, payment (can be received), payout (can be paid out) and payout_min_usd. No key needed. Call it before creating invoices, payouts or conversions to p

• get_fiat_rates

  Fiat → USD rates used for invoices priced in another currency (create_invoice with price_amount + price_currency). Without currency returns all rates; with currency (ISO 4217, e.g. "EUR") returns one or not_found. No key needed.

• get_fees

  What SnapEX Pay charges, no key needed. pricing: invoice_fee_percent (of a paid invoice; fee_on=customer puts it on the payer), invoice_min_usd/invoice_max_usd, static_address_fee_percent, payout_service_fee_percent; the network fee of a payout depends on the coin and is quoted b

• list_static_address_networks

  Lists the coins/networks for which you can get a permanent deposit address (create_static_address): asset code (e.g. "usdt.trc20", "usdc.polygon", "btc"), symbol, network, available, and how a deposit is credited (always in USDT). No key needed.

• get_balances

  Returns the account balance. Every payment is credited in USDT (TRC20 accounting), whatever coin the payer used: available (can be paid out or converted now) and held (reserved by payouts in progress), each as a decimal string and in atomic units.

• list_transactions

  Ledger of the balance, newest first: every credit and debit (payments, payouts, fees, conversions) with amount, direction and time. Paginated with cursor.

• create_invoice

  Creates an invoice and returns pay_url — a hosted payment page where the payer picks a coin and pays; the amount is credited to your balance in USDT minus the fee. Give amount_usd, or price_amount + price_currency (converted at get_fiat_rates). Use environment "test" to try the w

• get_invoice

  Returns one invoice with its status (open, awaiting, underpaid, paid, partially_paid, expired), pay_url, credit_usd, the selected coin and the payment attempts. Poll it every 15–30 s while the payer pays, or use webhooks.

• list_invoices

  Invoices of the account, newest first, optionally filtered by status and environment. Paginated with cursor.

• get_invoice_payment_methods

  Lists the coins and networks the payer can use for this invoice, with the amount to send in each.

• select_invoice_payment_method

  Chooses the coin for an invoice and returns the deposit address and exact amount to send (in the invoice payment attempt) — use it when you pass the address to the payer yourself instead of pay_url.

• preview_payment

  Low-level alternative to invoices: quotes a payment of an exact amount in one coin and how much USDT you will be credited. Returns credit_lock_id for create_payment (valid until expires_at). Most agents should use create_invoice instead.

• create_payment

  Creates a payment from a preview_payment quote and returns deposit_address (and deposit_memo when the network needs one) and the exact amount the payer must send before expires_at.

• get_payment

  One payment (from an invoice, a static address or create_payment): status (e.g. awaiting_deposit, detected, confirmed, expired), amounts expected/received/credited, deposit address.

• list_payments

  Payments of the account, newest first, optionally filtered by status. Paginated with cursor.

• create_static_address

  Gets (or creates) a permanent deposit address for a coin/network and optional customer_ref: the same address comes back for the same customer_ref. Every transfer to it is credited to your balance in USDT as a separate payment — good for top-ups. Networks: list_static_address_netw

• list_static_addresses

  Permanent deposit addresses of the account, optionally for one customer_ref. Paginated with cursor.

• list_static_address_deposits

  Transfers received on one permanent address with their status and credited USDT. Paginated with cursor.

• preview_payout

  Step 1 of sending money. Quotes a payout of amount USDT from your balance to an address in any coin with payout=true in list_assets: returns preview_id, to_amount (what the recipient gets), fee and expires_at. Nothing is sent yet and the quote is free; check the address and amoun

• create_payout

  Step 2 of sending money: executes a preview_payout quote and sends real funds from your balance — irreversible once sent. destination_network and destination_address must be the ones of the preview. idempotency_key is required: reuse the same key when retrying after a timeout so

• get_payout

  One payout: status (e.g. processing, completed, failed; manual_review — SnapEX staff checks it), amounts, fee, transaction_hash and transaction_url in the destination network's explorer.

• list_payouts

  Payouts of the account, newest first, optionally filtered by status. Paginated with cursor.

• preview_conversion

  Step 1 of converting assets held on the account into USDT. The balance is kept in USDT (every payment is credited in USDT), so this matters only for an account that still holds another asset; to exchange USDT into another coin, send a payout in that coin (preview_payout, e.g. to

• create_conversion

  Step 2: executes a preview_conversion quote before its expires_at; the balance changes at once. A preview runs once — calling again returns the same conversion.

• get_conversion

  One conversion with its status and amounts.

• list_conversions

  Conversions of the account, newest first. Paginated with cursor.

• list_webhooks

  Webhook endpoints of the account: endpoint_id, url, events, status.

• create_webhook

  Registers a public HTTPS URL that receives a POST for each chosen event (JSON {id, type, created_at, data}). Returns secret (shown once): verify each delivery with HMAC-SHA256 of " . " against the Webhook-Signature header ("v1= "). Deliveries are at-least-once — dedupe by Webhook

• update_webhook

  Replaces the url and events of an endpoint, or disables/enables it (status).

• rotate_webhook_secret

  Issues a new signing secret for an endpoint (shown once); the old one stops working at once.

Basischecksi

Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 6. Nov. 2026

• ✓ Bestanden

  Entwickler passt zum Repo

  Der Registry-Name wurde über die Domain snapex.pro bestätigt (die Registry prüft, wem die Domain gehört)

• … Noch nicht geprüft

  Wird noch gepflegt

  Dieses Repo haben wir noch nicht von GitHub gelesen

• … Noch nicht geprüft

  Hat eine Lizenz

  Dieses Repo haben wir noch nicht von GitHub gelesen

• ✓ Bestanden

  Endpunkt antwortet

  Antwort in 685 ms (HTTP 200)

• – Nicht zutreffend

  Anmeldung mit OAuth

  Keine Anmeldung nötig

• ✓ Bestanden

  Keine versteckten Anweisungen in Tool-Beschreibungen

  Wir haben 32 Tool-Beschreibungen gelesen und keine versteckten Anweisungen an die KI gefunden

Im Vergleich mit anderen in Sonstigesi

• Mehr Sterne als 0 % der anderen 32476 Server in dieser Kategorie
• Neuer in der Registry veröffentlicht als 92 % der anderen 32476 Server in dieser Kategorie
• Basischecks gleich gut wie oder besser als bei 100 % der anderen 32476 Server in dieser Kategorie

Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.

Alternativen

Server derselben Kategorie von anderen Entwicklern, sortiert nach Sternen.

So liest du eine Karte:★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti

README vom Entwickler

claude mcp add --transport http snapex-pay https://pay.snapex.pro/mcp

{

{

{

{

gemini extensions install https://github.com/snapexpay/snapex-pay-mcp

{

{

{

{

docker build -t snapex-pay-mcp .

php artisan mcp:export-tools      # writes src/tools.json, syncs the version of the manifests and LobeHub's tools