Flstudio MCP

flstudio-mcp

Control FL Studio with Claude: AI mixing, composition, and mix diagnosis through natural language.

*Claude diagnosing and fixing a mix in FL Studio through natural language.*

Overview

flstudio-mcp is a Model Context Protocol (MCP) server that lets Claude (Claude Code or Claude Desktop) drive FL Studio 2025 directly — the mixer, plugins, piano roll, routing, and project — from plain-language requests. Ask for a mix diagnosis, a vocal chain, a chord progression in a particular scale, or a full arrangement, and Claude carries it out through FL's scripting API and a set of calibrated, safety-checked tools.

It is genre- and producer-agnostic: nothing about it assumes a particular style of music.

Quickstart

For a new FL Studio setup, clone the repository so the controller and installer scripts are available:

git clone https://github.com/rosasynthesiz/flstudio-mcp.git

cd flstudio-mcp

Then run the installer for your OS. It installs the server into its environment, copies the FL controller, and seeds the note bridge:

:: first: in loopMIDI, create two ports named exactly "FLStudioMCP RX" and "FLStudioMCP TX"

scripts\install_windows.bat :: controller + server (.venv) + note bridge scripts\start_daemon.bat :: start the bridge in its own window, keep it open

./scripts/install_macos.sh         # macOS: controller + server + note bridge

fl-studio-mcp-daemon # start the bridge, keep it running

Wire the two virtual MIDI ports in FL (loopMIDI on Windows, IAC Driver on macOS), arm MCP_Apply once in the piano roll, then ask Claude in plain language:

"Scan my mix and tell me what's wrong." — "Set up a vocal chain from my plugins." — "Export this arrangement to MIDI."

Full setup is below.

For an environment whose FL controller and MIDI bridge are already configured, the server package is also available from PyPI:

python -m pip install fl-studio-mcp

The PyPI package does not replace the controller/port setup above. The current main branch may contain changes that have not yet been released to PyPI.

Capabilities

Mixing & diagnosis

• Mix Doctor — scans the whole mix and reports concrete problems (clipping, low headroom, level imbalance, missing high-pass, ungrouped related tracks, overlapping EQ boosts), each with the exact evidence and a proposed fix. Fixes are applied one at a time, only on approval, through a snapshot → write → readback → rollback safety layer. Master clipping is resolved by trimming the contributing source tracks rather than pulling the master.
• Full-song peak watch — holds a running peak per track across playback, so level decisions are based on the loudest moment of the actual song, not a single instant.
• Calibrated processing intents — musical EQ, compression, reverb, and delay moves mapped to real plugin parameters (native and third-party), each applied as one reversible change.
• Level-aware compression — sets thresholds relative to a track's measured level during playback.
• Gain staging — proposes per-track trims toward a healthy level with proper master headroom.
• Reference match — compares your mix's level and tonal balance against a reference track.
• Bulk track control — solo or mute a whole group (drums, vocals, …) in one step, with a one-call reset.
• Track & channel coloring — color a track, a channel, or a whole group (drums, vocals, …) by color name or hex, reversible like every other change.

Plugin & preset control

• Read and set plugin parameters by name, on native and third-party plugins (the parameter list is resolved live).
• Verified writes — every parameter write is re-read on a fresh tick and retried (0.4 s apart) if FL did not take it; the answer carries verified / attempts and a hint, so a swallowed write is reported instead of echoed back as if it worked.
• Batch parameter changes — fl_plugin_set_params sets several knobs of one plugin in a single paced burst and one undo step; fl_rollback_last_change puts them all back together.
• Chain suggestions and preset recommendations drawn from your actual installed library — read directly from FL's plugin database and preset folders on disk, so recommendations are limited to what you own.

Composition

• Multi-track MIDI export — generate a complete arrangement as a standard MIDI file to import.
• Multi-pattern arrangement — create, name, clone, and mark sections.
• Drum patterns in the step sequencer: read or set a channel's steps in the current pattern, e.g. x...x...x...x..., reversible like every other change.
• Note and chord writing into the piano roll, with quantize to a grid (for new notes and existing ones).
• Composition in any scale or mode — Western modes, pentatonic, ragas, maqam, and beyond — through the scale composer, where Claude supplies the notes for the requested scale.

Audio analysis

• Tempo and key estimation from an audio file.
• Melody-to-MIDI transcription (CREPE pitch tracking, with a lighter fallback).
• Chords-to-MIDI transcription of polyphonic audio (keys, piano, guitar) with Spotify's Basic Pitch, as notes for the piano roll or a .mid file.
• Drums to MIDI: a drum loop or stem to kick, snare, clap, closed and open hi-hat, aligned to the beat, as a .mid or straight into the step sequencer of the channels you choose (one undo step).

The server exposes 72 tools across 14 categories, plus 6 live resources (project, mixer, transport, channels, patterns, status) that Claude can read directly.

What sets it apart

flstudio-mcp is built as a mixing and production assistant, not only a note sender. It diagnoses and repairs a whole mix, makes decisions from real measured levels rather than guesswork, and is aware of your actual plugin and preset library when it makes suggestions. Every change that touches the project is shown before it is applied, logged, and reversible.

Limitations

These are properties of FL Studio's scripting API, stated plainly:

• Plugins, audio files, and rendering are UI-only. FL's API cannot load a plugin, load an audio file, or render audio. The plugin and preset tools therefore *suggest* — you load the chosen plugin or preset, and Claude then configures it. Audio export is done manually (File > Export); Claude can analyze the rendered file afterward.
• Only some plugin parameters accept arbitrary values. Levels and gains do; stepped parameters (filter types, orders, selectors) snap to their own grid steps, so an off-grid request cannot land; some parameters (Fruity Parametric EQ 2's band widths) ignore writes entirely. The parameter tools re-read and retry, then report verified: false with a hint and the value FL actually holds, instead of echoing the request as if it had landed.
• Note writing is armed once per session. A generated pyscript writes notes into the piano roll; FL exposes no API to run a pyscript, so you run "MCP_Apply" once from the piano roll's scripting menu at the start of a session.
• Micro-tonal and gamaka-heavy music is approximated. Scales with intervals smaller than a semitone (e.g. Arabic maqam) are rounded to the nearest semitone, and traditions built on gamaka/ornamentation (e.g. Carnatic) get the *scale framework* — the correct swaras and intervals — not gamaka or micro-tonal rendering. That's a limit of 12-tone MIDI, not of the tools.

Requirements

• Windows 10/11 (tested on Windows 11) or macOS
• FL Studio 2025 or newer
• Claude Code or Claude Desktop (or any MCP client)
• Python 3.10+
• Virtual MIDI ports:
• Windows: loopMIDI (download)
• macOS: the built-in IAC Driver
• Optional: ffmpeg on PATH (for MP3 analysis)

Linux is not yet supported — contributions welcome.

Setup

1. Create two virtual MIDI ports, named exactly FLStudioMCP RX and FLStudioMCP TX. These are the "cables" between the MCP server and FL Studio: one carries commands into FL (RX), the other carries answers back (TX). Do this before running the installer, because it checks for them.

Windows (loopMIDI):

• Install and open loopMIDI.
• If the list already holds ports with default names (loopMIDI Port, loopMIDI Port 1, …), select them and click − to remove them. The default names will not be detected.
• In the New port-name box at the bottom, type FLStudioMCP RX and click +.
• Type FLStudioMCP TX and click + again.
• Keep loopMIDI running (it can start with Windows from its tray icon); the ports exist only while it runs.

macOS:

• Open Audio MIDI Setup.
• Choose Window > Show MIDI Studio.
• Double-click IAC Driver.
• Enable Device is online.
• Create or rename two ports exactly:
• FLStudioMCP RX
• FLStudioMCP TX

1. Install the controller script and server:

Windows:

   git clone https://github.com/rosasynthesiz/flstudio-mcp

cd flstudio-mcp scripts\install_windows.bat

macOS:

   git clone https://github.com/rosasynthesiz/flstudio-mcp

cd flstudio-mcp chmod +x scripts/install_macos.sh ./scripts/install_macos.sh

This copies the controller script, seeds the note-bridge pyscript (MCP_Apply), installs the server, and checks that your virtual MIDI ports exist.

On Windows the server is installed into a .venv folder inside the repo, using Python 3.12/3.11/3.10 when available (the MIDI library has no working build for newer Pythons on Windows). The installer prints the full paths of the commands to use in the next steps. It finds your Documents folder even when it is redirected (OneDrive, non-English names). All FL Studio versions (2024, 2025, 2026, …) share one user-data folder, so one install covers them all. It also follows FL's own "User data folder" setting; if it still can't find the folder, run setx FL_SETTINGS " \FL Studio\Settings" once and open a new terminal (the installer and the daemon both use it).

Both installers ask two optional questions (re-run the installer any time to add them):

1. Audio analysis (about 100 MB, no AI models): tempo and key detection, drums to MIDI, light melody to MIDI, reference match.
2. AI audio to MIDI (about 650 MB, downloads AI models): accurate melody to MIDI with CREPE, full chords with Spotify's Basic Pitch.

To answer without the prompts, set FLMCP_EXTRAS first: all, none, or any of audio accurate chords.

Manual install or picking parts (Windows: .venv\Scripts\pip):

   pip install -e ".[audio]"                    # tempo/key + light melody

pip install -e ".[audio,audio-accurate]" # + CREPE (accurate melody) pip install -e ".[audio-chords]" # chords: then also run pip install --no-deps basic-pitch==0.4.0 # (skips its TensorFlow requirement)

1. Configure FL Studio — Options > MIDI Settings:

• Enable FLStudioMCP RX as an input, set its controller type to FLStudioMCP, and give it a port number.
• Select FLStudioMCP TX in the output list and give it the same port number. Outputs have no Enable button; setting the port is what activates it. Leave **Send master