Prototipo · Versión preliminar: todos los servidores del registro oficial, sincronizados cada 30 minutos. Las reseñas y las cuentas llegarán en una etapa posterior.
PopNx MCPServidores MCP para quienes usan IA · explicados con palabras sencillas

Control Your Tesla

de control-your-tesla.vercel.appversión 1.0.0i★ –iSe ejecuta en la nube
Nombre en el registroapp.vercel.control-your-tesla/control-your-tesla

Instalar

Resumen

Descripción del creador (original en inglés)

AI for your car: check charge, start climate, lock/unlock, open trunk via Tesla Fleet API. OAuth.

Los tres pilares de PopNx MCP

Estos tres nunca se combinan en una sola puntuación: las opiniones, las mediciones y la popularidad son cosas distintas.

Qué puedes hacer con él

Todavía no escribimos un resumen sencillo para este. Abajo están los datos que leímos del registro.

  • Conexión: Se ejecuta en la nube
  • Transporte: Streamable HTTP
  • Categoría: Otros

Instalación

Elige la app de IA que usas y copia la configuración.

Antes de instalar

Necesitas

¿Qué app usas?

Elige tu app arriba. La recordamos, así que la próxima vez el botón dirá “Instalar en …”.

Funciona en Claude para web, escritorio y móvil:

  1. Abre Settings → Connectors
  2. Presiona Add custom connector
  3. Pega la dirección de abajo y presiona Add
  4. Si te pide iniciar sesión, inicia sesión en el servicio del creador
SettingsConnectors1+ Add2https://…3
https://control-your-tesla.vercel.app/mcp

Ejecuta esto en tu terminal

claude mcp add --transport http control-your-tesla https://control-your-tesla.vercel.app/mcp

Abrir en Cursor

O copia la configuración tú

Pégalo en .cursor/mcp.json de tu proyecto, o en ~/.cursor/mcp.json

{
  "mcpServers": {
    "control-your-tesla": {
      "url": "https://control-your-tesla.vercel.app/mcp"
    }
  }
}

Tu navegador te pide permiso para abrir la app; luego la app muestra la configuración y te pide confirmar. Los valores de las claves quedan vacíos para que los completes tú.

Abrir en VS Code

O copia la configuración tú

Pégalo en .vscode/mcp.json de tu proyecto

{
  "servers": {
    "control-your-tesla": {
      "type": "http",
      "url": "https://control-your-tesla.vercel.app/mcp"
    }
  }
}

Tu navegador te pide permiso para abrir la app; luego la app muestra la configuración y te pide confirmar. Los valores de las claves quedan vacíos para que los completes tú.

ChatGPT solo se conecta a servidores en internet:

  1. Abre ChatGPT en la web → Settings → Connectors (Apps)
  2. Presiona Create o Add (en algunos planes primero hay que activar Developer mode en Advanced)
  3. Pega la dirección de abajo, ponle un nombre y guarda
  4. Si te pide iniciar sesión, inicia sesión en el servicio del creador
SettingsConnectors1+ Create2https://…3
https://control-your-tesla.vercel.app/mcp

Los nombres de los menús pueden variar un poco según el plan y con el tiempo.

Tu elección se guarda en una cookie en este dispositivo; no necesitas cuenta.

Esta configuración se genera a partir de la ficha del creador en el registro. Si el README dice otra cosa, sigue el README.

Qué puede hacer

Nombres y descripciones de las herramientas tal como los informó el servidor el 6 nov 2026. Los escribió el creador, no nosotros; los mostramos como texto sin formato.

  • get_setup_status

    Returns the current onboarding step, completed items, blockers, the next tool name, owner-facing instruction text, the exact link to open, and the /connect fallback URL.

  • start_account

    Creates or attaches an account for this setup session. Accepts the owner's email. Returns whether a sign-in email was sent and the /connect fallback URL.

  • start_tesla_oauth

    Starts Tesla sign-in and returns the hosted OAuth start URL (which redirects to Tesla's documented authorize endpoint) plus owner-facing instruction text. Later get_setup_status calls report denied, expired, or missing-scope failures.

  • verify_vehicle

    Reports whether the connected car is reachable from cached state and fleet_status (asleep, offline, or unsupported). Does not count as a wake.

  • subscribe

    Returns a single hosted Stripe Checkout URL or one-tap pay page for the owner to open. Yearly starts a 7-day trial (card required). Monthly charges on the first successful checkout. This tool does not collect or charge a card in the chat.

  • get_pricing

    Lists Standard and Plus monthly and yearly prices, allowances, trial length, and checkout URLs. Yearly includes a 7-day trial. Payment happens on the hosted Stripe page the owner opens.

  • create_checkout

    Creates a hosted Stripe Checkout session for a plan. Interval defaults to year (7-day trial). Returns the URL for the owner to open.

  • get_subscription_status

    Returns trial/active/none billing state, remaining usage, and whether vehicle tools are gated.

  • cancel_subscription

    Cancels the owner's subscription at the end of the current period. Access stays until then.

  • get_customer_portal

    Returns a Stripe Customer Portal URL where the owner can cancel, update the card, or download invoices.

  • list_vehicles

    Lists vehicles linked to this account after Tesla OAuth and an active trial or subscription. A setup_incomplete error means onboarding is not finished; get_setup_status reports the remaining step.

  • get_vehicle_state

    Returns vehicle state (charge, climate, lock, location) from a short cache, or a metered vehicle_data read on miss. Does not wake the car.

  • get_battery_and_range

    Returns battery percent, rated range, charge limit, and charging state. Uses the short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • nearest_superchargers

    Returns nearby Superchargers from the last cached location. Does not wake the car.

  • get_virtual_key_status

    Reports whether the virtual key is paired. If not, returns the official tesla.com/_ak pairing link and owner-facing pairing steps. Approving Third-Party Apps is not the same as pairing the key.

  • lock_vehicle

    Locks the vehicle.

  • unlock_vehicle

    Unlocks the vehicle. Requires confirm=true unless the owner disabled confirmations. Blocked in read-only mode.

  • actuate_trunk

    Opens or closes the rear trunk or front trunk (frunk). Opening requires confirm=true when confirmations are on.

  • set_climate

    Starts or stops cabin climate / preconditioning.

  • set_seat_heater

    Sets a seat heater level (0-3). Climate on usually works better.

  • set_charge

    Starts or stops charging, or sets the charge limit percent.

  • honk_horn

    Honks the horn. The vehicle must be in park.

  • flash_lights

    Flashes the headlights. The vehicle must be in park.

  • remote_start

    Remote-starts the vehicle. Requires confirm=true when confirmations are on. Blocked in read-only mode.

  • wake_vehicle

    Wakes the vehicle. Cached reads do not need a wake. Wakes count against the monthly allowance.

  • get_vehicle_summary

    Returns a vehicle snapshot: online/asleep, battery, range, lock, climate, sentry, and last location. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • get_charging_status

    Returns charging status: percent, limit, plugged in, power, and minutes to full. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • get_charging_history

    Returns recent charging sessions (home, Supercharger, destination) with kWh and cost when Tesla reports it. Does not wake the car.

  • get_energy_usage

    Returns Powerwall / solar live status and calendar history when the owner has an energy site. Does not wake the car.

  • get_location

    Returns latitude/longitude plus a human place name when one can be resolved. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • share_destination

    Sends a destination to the car from address text and/or lat/lon. Returns the command confirmation and cached vehicle state.

  • set_charge_limit

    Sets the charge limit percent (50–100). Out-of-range values return invalid_arguments.

  • set_scheduled_departure

    Enables or disables scheduled departure (minutes past midnight). Optionally keeps preconditioning on.

  • set_sentry_mode

    Turns Sentry Mode on or off.

Revisiones básicasi

Revisamos información que cualquiera puede ver; no hemos leído el código. Las revisiones que no aplican no se cuentan. · Revisado el 8 nov 2026

  • ! Precaución

    El creador coincide con el repo

    El registro no indica ningún repo de código fuente, así que no podemos relacionar a quien lo publicó (control-your-tesla.vercel.app) con el código

  • … Aún sin revisar

    Sigue en mantenimiento

    Todavía no hemos leído este repo en GitHub

  • … Aún sin revisar

    Tiene licencia

    Todavía no hemos leído este repo en GitHub

  • ✓ Superada

    El endpoint responde

    Respondió en 971 ms (HTTP 200)

  • – No aplica

    Inicio de sesión con OAuth

    No hace falta iniciar sesión

  • ✓ Superada

    Sin instrucciones ocultas en las descripciones de herramientas

    Leímos 34 descripciones de herramientas y no encontramos instrucciones ocultas para la IA

Comparado con otros en Otrosi

  • Más estrellas que el 0% de los otros 18438 servidores de esta categoría
  • Publicado en el registro más recientemente que el 93% de los otros 18438 servidores de esta categoría
  • Revisiones básicas iguales o mejores que el 36% de los otros 18438 servidores de esta categoría

Comparado con todos los servidores activos de esta categoría en el registro. Las estrellas solo cuentan cuando quien lo publica es dueño del repo.

Preguntas frecuentes

¿Es seguro Control Your Tesla?

Superó 2 de 3 revisiones básicas aplicables. No hemos leído el código. Antes de agregar una clave o un token, revisa qué acceso pide el servidor y usa una clave que tenga solo los permisos que necesitas.

¿Qué claves o códigos necesita?

El registro no indica ninguna clave obligatoria, aunque algunos servidores te piden iniciar sesión la primera vez que los usas.

¿Se ejecuta en mi computadora o en la nube?

Se ejecuta en la nube del creador. Te conectas por internet sin instalar nada, pero lo que envías pasa por los servidores del creador.

¿Sigue en mantenimiento?

El repo de GitHub cambió por última vez –, y la última versión (1.0.0) llegó al registro hace 3 días.

¿Qué apps pueden usarlo?

Las apps compatibles con MCP, como Claude Desktop, Claude Code, Cursor y VS Code. Se conecta por URL, así que también funcionan las apps que aceptan servidores MCP remotos, como ChatGPT en modo desarrollador.

¿Qué puedo usar en su lugar?

En la misma categoría: Spec Driven Development, Remote Desktop Commander, Tethered Trust

Alternativas

Servidores de la misma categoría hechos por otros creadores, ordenados por estrellas.

Cómo leer una tarjeta:↓ Descargas por semanai★ Estrellas de GitHubiTres pilares: reseñas · revisiones · usoiActualizado = fecha en que se publicó la última versión en el registroi

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

de formulahendryInicial↓ 66/sem★ 440Actualizado hace 14 meses

Se ejecuta en tu computadora

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

de desktop-commanderEn crecimiento★ 211Actualizado hace 3 días

Se ejecuta en la nube✓ desktopcommander.app

Tethered Trust

Fit, compatibility and recall checks for AI agents before they buy: verdicts, evidence, receipts.

de tetheredtrust.comMuy nuevoActualizado hoy

Se ejecuta en la nube✓ tetheredtrust.com

README del creador

No se encontró un README en el repo

Pregunta a PopNx