Prototipo · Versión preliminar: todos los servidores del registro oficial, sincronizados cada 30 minutos. Las reseñas y las cuentas llegarán en una etapa posterior.
PopNx MCPServidores MCP para quienes usan IA · explicados con palabras sencillas

VMware Debug

de zw008versión 1.8.7i★ –iSe ejecuta en tu computadora
Nombre en el registroio.github.zw008/vmware-debug

Instalar

Resumen

Descripción del creador (original en inglés)

Read-only VMware incident correlation: timeline, spikes, root-cause routing. 2 MCP tools.

Los tres pilares de PopNx MCP

Estos tres nunca se combinan en una sola puntuación: las opiniones, las mediciones y la popularidad son cosas distintas.

Qué puedes hacer con él

Todavía no escribimos un resumen sencillo para este. Abajo están los datos que leímos del registro.

  • Conexión: Se ejecuta en tu computadora
  • Transporte: stdio
  • Categoría: Otros

Instalación

Elige la app de IA que usas y copia la configuración.

Antes de instalar

Necesitas

  • PyPIuv de Python instalado (para el comando uvx)

¿Qué app usas?

Elige tu app arriba. La recordamos, así que la próxima vez el botón dirá “Instalar en …”.

Abre Claude Desktop → Settings → Developer → Edit Config y pega esto en claude_desktop_config.json

{
  "mcpServers": {
    "vmware-debug": {
      "command": "uvx",
      "args": [
        "vmware-debug"
      ]
    }
  }
}

Ejecuta esto en tu terminal

claude mcp add vmware-debug -- uvx vmware-debug

Abrir en Cursor

O copia la configuración tú

Pégalo en .cursor/mcp.json de tu proyecto, o en ~/.cursor/mcp.json

{
  "mcpServers": {
    "vmware-debug": {
      "command": "uvx",
      "args": [
        "vmware-debug"
      ]
    }
  }
}

Tu navegador te pide permiso para abrir la app; luego la app muestra la configuración y te pide confirmar. Los valores de las claves quedan vacíos para que los completes tú.

Abrir en VS Code

O copia la configuración tú

Pégalo en .vscode/mcp.json de tu proyecto

{
  "servers": {
    "vmware-debug": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "vmware-debug"
      ]
    }
  }
}

Tu navegador te pide permiso para abrir la app; luego la app muestra la configuración y te pide confirmar. Los valores de las claves quedan vacíos para que los completes tú.

Este se ejecuta en tu computadora, y ChatGPT solo puede conectarse a servidores en internet. Elige otra app.

Tu elección se guarda en una cookie en este dispositivo; no necesitas cuenta.

Esta configuración se genera a partir de la ficha del creador en el registro. Si el README dice otra cosa, sigue el README.

Qué puede hacer

Se ejecuta en tu computadora; la lista de herramientas aparece en tu app de IA después de instalarlo.

Revisiones básicasi

Revisamos información que cualquiera puede ver; no hemos leído el código. Las revisiones que no aplican no se cuentan. · Revisado el 6 nov 2026

  • ✓ Superada

    El creador coincide con el repo

    El nombre en el registro se verificó con la cuenta de GitHub zw008, dueña del repo

  • … Aún sin revisar

    Sigue en mantenimiento

    Todavía no hemos leído este repo en GitHub

  • … Aún sin revisar

    Tiene licencia

    Todavía no hemos leído este repo en GitHub

  • – No aplica

    El endpoint responde

    Este se ejecuta en tu computadora; no hay endpoint en internet

  • – No aplica

    Inicio de sesión con OAuth

    Se ejecuta en tu computadora y usa ajustes locales en su lugar

  • … Aún sin revisar

    Sin instrucciones ocultas en las descripciones de herramientas

    Se ejecuta en tu computadora; solo podemos leer listas de herramientas de endpoints en internet

Comparado con otros en Otrosi

  • Más estrellas que el 0% de los otros 32371 servidores de esta categoría
  • Publicado en el registro más recientemente que el 19% de los otros 32371 servidores de esta categoría
  • Revisiones básicas iguales o mejores que el 100% de los otros 32371 servidores de esta categoría

Comparado con todos los servidores activos de esta categoría en el registro. Las estrellas solo cuentan cuando quien lo publica es dueño del repo.

Preguntas frecuentes

¿Es seguro VMware Debug?

Superó 1 de 1 revisiones básicas aplicables. No hemos leído el código. Antes de agregar una clave o un token, revisa qué acceso pide el servidor y usa una clave que tenga solo los permisos que necesitas.

¿Qué claves o códigos necesita?

El registro no indica ninguna clave obligatoria, aunque algunos servidores te piden iniciar sesión la primera vez que los usas.

¿Se ejecuta en mi computadora o en la nube?

Se ejecuta en tu computadora. Tu app de IA lo inicia cuando hace falta, y los datos no pasan por los servidores del creador (a menos que el propio servidor llame a un servicio en línea).

¿Sigue en mantenimiento?

El repo de GitHub cambió por última vez –, y la última versión (1.8.7) llegó al registro hace 4 meses.

¿Qué apps pueden usarlo?

Las apps compatibles con MCP, como Claude Desktop, Claude Code, Cursor y VS Code. También necesitas Python (uv) en tu computadora.

¿Qué puedo usar en su lugar?

En la misma categoría: Spec Driven Development, Remote Desktop Commander, Opencu

Alternativas

Servidores de la misma categoría hechos por otros creadores, ordenados por estrellas.

Cómo leer una tarjeta:★ Estrellas de GitHubiTres pilares: reseñas · revisiones · usoiActualizado = fecha en que se publicó la última versión en el registroi

Spec Driven Development

de formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

Se ejecuta en tu computadora★ 440MITActualizado hace 14 meses
Instalar

Remote Desktop Commander

de desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

Se ejecuta en la nube★ 211Actualizado ayer
Instalar

Opencu

de Daily-AC

Independent local computer-use engine and MCP server for macOS, Windows, Linux and Android

Se ejecuta en tu computadoraActualizado hoy
Instalar

README del creador

Abrir el README

Copiado tal cual del repo del creador. PopNx MCP no lo ha revisado ni lo respalda. Se quitaron HTML, imágenes y scripts. Los enlaces llevan fuera de este sitio.

VMware Debug

For a read-only check of this skill with your model and agent host, use the shared model-fit self-test in the marketplace root.

Disclaimer: Community-maintained open-source project, **not affiliated with,

endorsed by, or sponsored by VMware, Inc. or Broadcom Inc.** "VMware" and

"vSphere" are trademarks of Broadcom. Source is publicly auditable under the MIT

license.

The diagnostic brain of the VMware skill family. You bring the symptom (an error, a log dump, a slow VM); this skill runs a systematic investigation, correlates events from the other skills into one timeline, ranks root-cause hypotheses, and tells you what to check next. It never touches vSphere — it connects to nothing and never executes fixes; its only writes are to a local case ledger under $OPS_HOME. Remediation is routed to vmware-aiops (single op) or vmware-pilot (multi-step, gated), mirroring the vmware-harden → vmware-pilot advisor/executor split.

See skills/vmware-debug/SKILL.md for the full methodology, the event-envelope contract, and symptom routing.

Upgrading to 2.0

2.0 renames 13 of its 14 MCP tools so every name starts with a verb (e.g. case_close → close_case, case_get → get_case, case_grade → grade_case). The full old → new table is in RELEASE_NOTES.md. Nothing else changes: same tools, parameters, safety gates and CLI commands. If an agent prompt, script or ~/.vmware/rules.yaml names a tool, update it — though deny rules written with the old names keep working with vmware-policy ≥ 1.18.1 (vmware-audit policy lists any rule the renames widened), and vmware-pilot ≥ 1.13 translates old names in saved workflows. If an install older than 2.0 shares that rules.yaml, give it vmware-policy ≥ 1.18.2 too: it matches each rule against both the old and the new name, so one file serves both.

Companion Skills

NeedSkill
Incident correlation / root causevmware-debug (this project)
Centralized log searchvmware-log-insight (feed its search_logs results here)
vCenter events and alarmsvmware-monitor
Metrics / anomaliesvmware-aria
Executing a fixvmware-aiops (single op) / vmware-pilot (multi-step, gated)

Install

uv tool install vmware-debug

vmware-debug categories # see which symptom categories it can diagnose

MCP tools (14 — 7 read, 7 write)

The seven writes go to the local case ledger only; none reaches a VMware system.

Correlation — stateless, for a single look:

ToolWhat
build_incident_timeline[READ] Correlate pre-fetched events → timeline + spikes + ranked hypotheses + next-check ideas
list_symptom_categories[READ] List recognised symptom categories + what to check for each

Investigation ledger — for an incident you will reason about over time:

ToolWhat
open_case[WRITE] Define the event; returns a case id and the grade this environment can reach
get_case_readiness[READ] What grade this environment can reach, per symptom category, before you start
get_case_knowledge[READ] Which knowledge formats are accepted, what is mounted, and which entries apply to a case
plan_case[READ] What to fetch next — skill, tool and purpose per step; recomputed from the case's current state
list_cases[READ] Cases, newest first
get_case[READ] One case: scope, ledger sizes, grade history
record_case_hypothesis[WRITE] Register a candidate explanation, or read the ledger of what supports and refutes each
submit_case_evidence[WRITE] Record one retrieved fact, with its source, query and time basis
record_case_gap[WRITE] Record what could not be retrieved, and how to close it
record_case_timeline[WRITE] Correlate everything the case has collected into one timeline
grade_case[WRITE] Recompute the conclusion grade from the ledger and record it
close_case[WRITE] Record the final grade, archive, and name what was left open

Event envelope: {ts, source, severity, entity, text, fields}. The agent normalizes events from each source into this shape before handing them to debug, so debug has zero runtime dependency on the other packages. Keep each event's `event_type` in `fields` — the classifier matches it as well as the text, and most modern vSphere events are EventEx: the text is a generic boilerplate sentence, and only eventTypeId says what the event actually is.

Security

Offline and credential-free by construction: it connects to no vCenter/NSX/Aria, has no destructive surface on VMware, and holds no secret to leak. The only writes are the local case ledger: evidence, gaps, hypotheses and grade history are append-only; timeline.md is regenerated from the evidence, and case.json holds the current grade and status. The same holds with several writers: every write to a case first takes that case's lock file (.ledger.lock, exclusive create), so two processes writing the same case in a shared $OPS_HOME are serialized instead of dropping each other's entries; every file is written under a temporary name and then moved into place, so a reader never sees a half-written file (on a file system without hard links, a new evidence file is instead created in place: still never overwritten, but it can be read half-written). A lock left behind by a crashed process is reported together with its holder and never deleted automatically; delete it by hand once you have confirmed no process is writing that case. Released versions 1.11.3 and earlier do not take this lock, so every machine sharing a case directory must upgrade. See SECURITY.md.

Offline / Air-Gapped Install (from source)

This project uses the modern PEP 517 build system (hatchling), so there is no `setup.py` by design — that is expected, not a missing file. If you cloned the source and hit ERROR: File "setup.py" or "setup.cfg" not found ... editable mode currently requires a setuptools-based build, your pip is older than 21.3 and cannot do an *editable* (-e) install with a non-setuptools backend. Editable mode is a developer convenience, not needed to run the tool — do one of:

# From the source tree — a normal (non-editable) install builds a wheel:

pip install . # NOT pip install -e .

...or upgrade pip first, and editable works too:

pip install --upgrade pip && pip install -e .

For a truly air-gapped host, build the wheels on a connected machine and copy them over — the target then needs no network:

# On a connected machine, collect this package + its dependencies as wheels:

pip wheel . -w dist # → dist/*.whl (or: uv build, for just this package)

Copy dist/ to the air-gapped host, then install offline:

pip install --no-index --find-links dist vmware-debug

Remote access (HTTPS) and limiting tools

By default vmware-debug mcp speaks stdio to one local client and offers every tool. Two options change that (vmware-policy ≥ 1.21.0).

Serve over HTTPS so clients on other machines can connect. Every caller needs a bearer token:

vmware-audit token create alice          # prints the token once; give it to alice

vmware-audit token list # names only vmware-audit token revoke alice # refused from its next request, no restart vmware-debug mcp --transport https --host 0.0.0.0 --port 8443 \ --cert /etc/vmware-mcp/server.pem --key /etc/vmware-mcp/server-key.pem \ --public-name mcp.example.com

Connect a client (Claude Code shown; any MCP client that supports streamable HTTP and custom headers works):

claude mcp add --transport http vmware-debug https://mcp.example.com:8443/mcp \

--header "Authorization: Bearer $VMWARE_MCP_TOKEN"

{

"mcpServers": { "vmware-debug": { "type": "http", "url": "https://mcp.example.com:8443/mcp", "headers": { "Authorization": "Bearer ${VMWARE_MCP_TOKEN}" } } } }

  • The server will not start without a token, refuses Host/Origin values outside --public-name, and checks before it binds that unauthenticated requests get 401. Use a certificate your clients trust for those names.
  • Behind a TLS-terminating reverse proxy on the same machine use --transport http --host 127.0.0.1 --public-name mcp.example.com and pass the Authorization header through.
  • Behind a load balancer or gateway on another machine, keep --transport https (a self-signed certificate is fine), list in --public-name the host name the balancer sends as Host, and have it forward Authorization. Its health probe can use GET /healthz, which needs no token and returns only {"status": "ok"} (vmware-policy ≥ 1.23.0).
  • Send traceparent or X-Request-ID with each request to have it stored on the audit row; vmware-audit log --correlation-id ID then finds the calls behind one platform request.
  • The audit log records each caller as token: . Calls naming different targets run in parallel; calls that name no target run one at a time, so name the target when several people share a server.
  • Everyone who can reach the endpoint acts with this server's account. Tokens identify callers; they grant nothing on the platform. Run one endpoint per privilege level.
  • Several people or roles on one endpoint: run vmware-audit roles enable once, then give each token a role (vmware-audit token create NAME --role reader, or a role in roles.yaml naming tools and targets; vmware-policy ≥ 1.24.0). A role limits what the token may call on this endpoint; it cannot grant more than the account has. See vmware-policy's README, "Roles for network callers".

Offer only read tools, plus the writes you choose:

vmware-debug mcp --expose read --allow-write close_case

or: VMWARE_DEBUG_MCP_EXPOSE=read VMWARE_DEBUG_MCP_ALLOW_WRITE=close_case vmware-debug mcp

Tools not offered do not appear in the client's tool list. A bad value or an unknown write tool stops the server (exit 2). This limits what clients are offered; it is not authorization, so the account itself should be least-privilege.

Details: skills/vmware-debug/references/setup-guide.md ("Serving MCP over HTTPS", "Limiting which tools are offered").

License

MIT.

Pregunta a PopNx