プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

SketchUp MCP

作者:2ez4gcxバージョン 1.6.0i★ 8iパソコンで動くリポジトリ ↗
レジストリ名io.github.2ez4gcx/sketchup-mcp

インストール方法

What it does

Let AI work in SketchUp: rooms, tagging, real-surface takeoff, checks, scenes, furniture, renders.

  • Connects パソコンで動く
  • Account or key No key needed
  • Category その他

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気11/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ12/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア23/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

チェック 3/3 合格 · あなたのパソコンで動きます

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

  1. 提供元のインストールファイルをダウンロード

    作者の .mcpb ファイルをダウンロード

    .mcpb ファイルは提供元から直接のもので、当サイトは変更していません

  2. ファイルをダブルクリックし、パソコン版 Claude アプリで Install を押す

  3. 試してみる

    SketchUp MCP を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が SketchUp MCP を使っていると言うか、回答に SketchUp MCP のツール名が出れば接続成功です

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ SketchUp MCP につなげません

SketchUp MCP はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · SketchUp MCP につなげるアプリを使う

  • キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

B · その他 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code はまだ SketchUp MCP につなげません

提供元はパソコン版 Claude アプリ用のインストールファイルしか用意していません

代わりにできること

A · SketchUp MCP につなげるアプリを使う

  • キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

Cursor はまだ SketchUp MCP につなげません

提供元はパソコン版 Claude アプリ用のインストールファイルしか用意していません

代わりにできること

A · SketchUp MCP につなげるアプリを使う

  • キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

VS Code はまだ SketchUp MCP につなげません

提供元はパソコン版 Claude アプリ用のインストールファイルしか用意していません

代わりにできること

A · SketchUp MCP につなげるアプリを使う

  • キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?SketchUp MCP を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

自分で入力する値

  • SKETCHUP_MCP_PORT env
    SketchUp 内の SU MCP Bridge 拡張機能の TCP ポート(SketchUp で設定したポートと一致させる必要があります)
    英語の原文を見るTCP port of the SU MCP Bridge extension in SketchUp (must match the port set in SketchUp)
  • SKETCHUP_MCP_TIMEOUT env
    SketchUp が 1 つのコマンドに応答するまで待つ秒数
    英語の原文を見るSeconds to wait for SketchUp to answer one command

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

週あたりのダウンロードi
npm/PyPIにない
接続方法
パソコンで動く
最新バージョンi
1.6.0
カテゴリi
その他
レジストリ公開日i
2026年11月18日
コードの最終更新i
2026年11月16日
作者
2ez4gcx
パッケージ
mcpb: …/sketchup-mcp-1.6.0.mcpb
ウェブサイト
github.com
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月18日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント 2ez4gcx で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:一昨日

  • ✓ 合格

    ライセンスがある

    MITを使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

未確認:バージョン付きの npm と PyPI パッケージのみ確認できます

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/2ez4gcx-sketchup-mcp.svg)](https://mcp.popnx.com/en/servers/2ez4gcx-sketchup-mcp)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

その他のほかのサーバーとの比較i

  • このカテゴリのほかの20575件のうち96%よりスターが多い
  • このカテゴリのほかの20575件のうち99%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの20575件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

SketchUp MCPは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は一昨日、最新バージョン(1.6.0)がレジストリに届いたのは今日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにMCPBも必要です。

代わりに使えるものは?

同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73広く使われている★ 9.1万一昨日更新

クラウドで動く✓ 提供元 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ広く使われている★ 92742 か月前更新

クラウドで動く✓ 提供元 · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

作者:JanDeDobbeleer広く使われている★ 2.4万 リポジトリ全体のスター29 日前更新

クラウドで動く✓ 提供元 · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI成長中★ 582614 か月前更新

クラウドで動くリポジトリはアーカイブ済み✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom広く使われている★ 51354 か月前更新

クラウドで動く✓ 提供元 · jitsu.com
似たものと比べる
これ
SketchUp MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
動く場所パソコンにインストールが必要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要
キーが必要いいえいいえいいえいいえいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/34/44/44/41/44/4
ライセンスMITAGPL-3.0AGPL-3.0MITApache-2.0MIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

SketchUp MCP

English | Tiếng Việt

SketchUp MCP lets Claude work directly in the SketchUp model you have open. Ask in plain language, in any language, and Claude reads the model, runs quantity takeoffs by tag or material, models geometry, assigns materials and tags, takes screenshots to check its own work, and exports images and files. It ships as a Claude Desktop extension (.mcpb) that runs on the Node.js built into Claude Desktop, plus a small Ruby extension for SketchUp (the SU MCP Bridge). You do not need to install Python or Node.js.

Current version: 1.4.0 - download it from Releases. Also listed in the official MCP Registry as io.github.2ez4gcx/sketchup-mcp.

Features

34 tools, all working in millimetres (areas in m², volumes in m³, angles in degrees, Z up):

GroupTools
Read & statisticsping, model_info, list_tags, list_components, list_materials, selection_info, quantity_takeoff, interior_takeoff, check_model, check_design
Modelling & editingcreate_box, create_shape (polygon + pushpull), create_lines, insert_component, transform_entities, set_material, set_tag, setup_tags, make_group, create_room, purge_unused, delete_entities, select_entities, undo
Views, images & filesset_view, create_scenes, screenshot, export_png, export_file, save_model, open_model, new_model
Ruby scriptingrun_ruby
Setupinstall_sketchup_bridge

Highlights:

  • Professional tags: Claude tags what it models like a finish schedule, CODE-NN description (for example FL-01 Engineered oak floor 12mm, WL-02 Walnut veneer panel, CL-01 Gypsum flat ceiling): one tag per specification, so one tag is one line of the bill of quantities. Codes cover floors (FL), skirting (SK), wall finishes (WL), partitions (PA), ceilings (CL), cornices (CO), doors (DR), windows (WN), glass (GL), built-in joinery (JN), furniture (FN), lighting (LT), sanitary ware (SN), equipment (EQ), curtains (CU), decor (DE), existing structure (EX) and reference (RF). Each tag goes into a folder for its category (SketchUp 2021+) with a category color, shown by *Color by tag* in the Tags panel. A tag scheme already in the model is followed instead.
  • Interior bill of quantities (interior_takeoff): one row per tag with the unit its category needs: floors and ceilings in m² (each board once, whatever its face orientation; sloped ceilings at their real area), walls, partitions and glass in m² of one side (a door or window that cuts only one face of the wall is deducted), skirting and cornices in metres (also runs made with Follow Me around a room), curtains in width x height, existing structure in m³, everything else by count. Walls drawn at an angle are measured like straight ones. It adds totals per category and warnings: geometry in no tagged object, a whole room drawn as one box, objects on hidden tags (not measured unless you ask), components nested in a finish without their own tag. It can save the table as a CSV file for Excel.
  • Quantities by room: put each room's objects in a named group without a tag (for example Living room; nested groups give Level 2 / Bedroom 1), and by_room splits every line by room. The CSV then has one column per room next to the total. make_group builds the room groups.
  • Rooms in one step (create_room): give the outline of a room (the bare inner face of its walls), its height and its finishes, and Claude builds the floor finish, one wall-finish panel per wall with the doors and windows cut through, the ceiling board, the skirting (interrupted at doors) and the door leaves and glass panes, each tagged and named, inside a room group. Every wall panel follows its wall, so angled rooms are measured and checked correctly. A feature wall can take another finish, and an open side can be left without a wall.
  • Model health check (check_model, purge_unused): geometry outside groups or without a tag, raw faces carrying tags, inside-out solids and faces turned different ways, stacked duplicate copies (they double quantities), loose and tiny edges, unused components/materials/tags, heavy textures and components, hidden objects, tags without a standard code. purge_unused cleans up, keeping the empty standard tags made with setup_tags.
  • Documentation scenes (create_scenes): furniture plan, reflected ceiling plan (same orientation as the plan, with walls and openings for reference), floor finish plan, four elevations and an eye-level view per room, and plans per level when rooms are grouped into levels. The section planes sit on a hidden tag of their own (they still cut) and the ceiling plan gets a style of its own with your display settings and X-ray. Re-running replaces the scenes it made for the same kinds and rooms; your own scenes, view, style and tags are left as they were. Scene names can be in any language.
  • Design checks (check_design): clear ceiling height per room and under bulkheads, overall door size, furniture clashing with walls, tight passages, furniture in a door swing zone (sliding doors skipped) and the kitchen work triangle. The limits are common reference values, not a building-code check: set them to your project's rules.
  • Quantity takeoff by tag or material: walks the whole model (or only the selection) and totals face area, face count, edge length, solid volume and component instance counts. Untagged or unpainted entities inherit the tag or material of their parent group.
  • Screenshot that restores your view: Claude sees the viewport image directly. When it asks for a specific view (iso, top, front...), the camera changes only for the capture, and your own view comes back afterwards.
  • `run_ruby` as one undo step: when no dedicated tool fits, Claude can run Ruby API code. The whole snippet is a single Undo step. On an error the partial changes are rolled back, and the message points to the line in the snippet.
  • Every model edit is one Undo step, named MCP: ... in SketchUp's Edit menu, so Ctrl + Z always takes back exactly one Claude action.
  • `install_sketchup_bridge`: Claude installs or updates the Ruby bridge itself. It copies the files into the Plugins folder of every SketchUp version that has been opened at least once (dry_run only reports what it would do).
  • Safe defaults: an existing material keeps its color unless Claude passes update_existing=true. delete_entities only deletes by explicit id, never by selection. After a timeout, the error tells Claude whether the command may already have run, so it does not repeat the edit and create duplicate geometry.
  • Version check: ping shows which model Claude is controlling and warns when the bridge in SketchUp is older than the one bundled in the extension.
  • SketchUp menu (*Extensions > SU MCP Bridge*): Start server, Stop server, Status, Open log file, Change port....

Demo

This demo pavilion was built entirely through the MCP tools (create_box, create_shape, run_ruby, set_material, set_tag), then checked with screenshot and quantity_takeoff - 82 tool calls in total.

How it works

Claude Desktop

| MCP over stdio v sketchup-mcp-1.4.0.mcpb Node.js MCP server, runs on the Node built into Claude Desktop | one JSON request per command, TCP 127.0.0.1:9876 (localhost only) v SU MCP Bridge Ruby extension inside SketchUp, starts with SketchUp | SketchUp Ruby API v the open SketchUp model

Requirements

  • Claude Desktop (a current version, with *Settings > Extensions*), signed in to a Claude account.
  • SketchUp 2017 or later (desktop). Tested on SketchUp 2021 and 2023. Each SketchUp version must have been opened at least once before you install the bridge.
  • Windows 10/11: tested. macOS: untested (the extension is packaged for macOS and the installer knows the macOS Plugins folder, but it has not been tried on a Mac).
  • To build from source only: Node.js 18 or later and npm.

Download

Get the files from the latest release:

FileWhat it is
sketchup-mcp-1.4.0.mcpbClaude Desktop extension (the main download)
su_mcp-1.4.0.rbzSketchUp plugin (SU MCP Bridge), only needed for a manual install
SketchUpMCP_v1.4.0.zipEverything: extension, plugin, user guides (HTML + PDF, English and Vietnamese), sample prompts, changelog, license
SketchUp-MCP-Guide-1.4.0.pdfThe English user guide on its own

Install

  1. Install the extension in Claude Desktop. Open *Settings > Extensions*, then drag and drop sketchup-mcp-1.4.0.mcpb into the window, or click *Advanced settings > Install Extension...* and pick the file. Click *Install*. The build is not code-signed, so Claude Desktop may warn that the extension is unsigned: only install a file from this project's releases or one you built yourself. On the Microsoft Store version of Claude, double-clicking a .mcpb file does not open it, so install it through Settings.
  2. Install the SU MCP Bridge in SketchUp. In a new chat, ask Claude:

Install SU MCP Bridge in SketchUp

Claude calls install_sketchup_bridge (click *Allow*) and lists the SketchUp versions it updated. Or install it manually: *Extensions > Extension Manager > Install Extension* (SketchUp 2017-2020: *Window > Extension Manager*), then pick su_mcp.rbz. The plugin is not digitally signed. If SketchUp refuses to load it, set the Extension Loading Policy (gear icon in Extension Manager) to *Approve Unidentified Extensions*, if your IT policy allows it.

  1. Fully quit SketchUp and reopen it. Then check *Extensions > SU MCP Bridge > Status*. It should show SU MCP Bridge v1.4.0: RUNNING on 127.0.0.1:9876. Finally, ask Claude "Ping SketchUp".

Options are under *Settings > Extensions > SketchUp MCP > Configure*: the bridge port (default 9876) and the timeout per command (default 120 s; raise it for takeoffs on large models). If you change the port, change it in SketchUp too (*Extensions > SU MCP Bridge > Change port...*) and restart SketchUp.

To update, install the new .mcpb over the old one (your settings are kept), ask Claude to install the bridge again, and restart SketchUp. Always update both parts.

Sample prompts: mcpb/release-docs/en/SAMPLE_PROMPTS.txt. The full user guide (HTML and PDF) is in the release zip (GUIDE_EN.html / GUIDE_EN.pdf) and attached to each release; its source is mcpb/release-docs/en/GUIDE.html.

Other MCP clients

The .mcpb one-click install is specific to Claude Desktop, but the server is a standard MCP server over stdio, so any client that can launch local MCP servers can use it. Outside Claude Desktop you need Node.js 18 or later on your PATH.

1. Get the server. The .mcpb file is a zip archive. Extract it to a folder of your choice, for example with the tar that ships with Windows 10/11, in Command Prompt or PowerShell (the tar of Git Bash cannot read it). You can also rename the file to .zip and use *Extract All*:

mkdir C:\Tools\sketchup-mcp

tar -xf sketchup-mcp-1.4.0.mcpb -C C:\Tools\sketchup-mcp

The server is then C:/Tools/sketchup-mcp/server/index.mjs (use forward slashes in configs). The folder also contains the bridge files, so install_sketchup_bridge works

冒頭だけを表示しています。続きはリポジトリで読めます