World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for local IP cameras (ONVIF/RTSP): snapshots, recordings, pan/tilt, presets
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 20/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 12/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 32/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
IP cameras (ONVIF/RTSP) をインストールして。https://mcp.popnx.com/i/aidev-iprokszin-ipcam-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server IP cameras (ONVIF/RTSP) を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "ipcam": { "command": "uvx", "args": [ "ipcam-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、IP cameras (ONVIF/RTSP) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
SettingsDeveloperEdit Config
{
"mcpServers": {
"ipcam": {
"command": "uvx",
"args": [
"ipcam-mcp"
]
}
}
}IP cameras (ONVIF/RTSP) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が IP cameras (ONVIF/RTSP) を使っていると言うか、回答に IP cameras (ONVIF/RTSP) のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
IPCAM_MCP_CONFIG cameras.toml のパス(既定: /.config/ipcam-mcp/cameras.toml) 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ IP cameras (ONVIF/RTSP) につなげません
IP cameras (ONVIF/RTSP) はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
A · IP cameras (ONVIF/RTSP) につなげるアプリを使う
B · その他 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server IP cameras (ONVIF/RTSP) を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user ipcam -- uvx ipcam-mcp 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、IP cameras (ONVIF/RTSP) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --scope user ipcam -- uvx ipcam-mcpIP cameras (ONVIF/RTSP) が一覧にあり、接続済みと表示されれば OK です
IP cameras (ONVIF/RTSP) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が IP cameras (ONVIF/RTSP) を使っていると言うか、回答に IP cameras (ONVIF/RTSP) のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
IPCAM_MCP_CONFIG cameras.toml のパス(既定: /.config/ipcam-mcp/cameras.toml) 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server IP cameras (ONVIF/RTSP) を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "ipcam": { "command": "uvx", "args": [ "ipcam-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、IP cameras (ONVIF/RTSP) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
IP cameras (ONVIF/RTSP) を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が IP cameras (ONVIF/RTSP) を使っていると言うか、回答に IP cameras (ONVIF/RTSP) のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
IPCAM_MCP_CONFIG cameras.toml のパス(既定: /.config/ipcam-mcp/cameras.toml) 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server IP cameras (ONVIF/RTSP) を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "ipcam": { "type": "stdio", "command": "uvx", "args": [ "ipcam-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、IP cameras (ONVIF/RTSP) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
IP cameras (ONVIF/RTSP) を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が IP cameras (ONVIF/RTSP) を使っていると言うか、回答に IP cameras (ONVIF/RTSP) のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
IPCAM_MCP_CONFIG cameras.toml のパス(既定: /.config/ipcam-mcp/cameras.toml) 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください
JSON 設定は下の「開発者向け」にあります
Claude Code
claude mcp add --scope user ipcam -- uvx ipcam-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"ipcam": {
"command": "uvx",
"args": [
"ipcam-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"ipcam": {
"command": "uvx",
"args": [
"ipcam-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"ipcam": {
"type": "stdio",
"command": "uvx",
"args": [
"ipcam-mcp"
]
}
}
}IPCAM_MCP_CONFIG env説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント aidev-iprokszin で確認済みです
コードの最終更新:一昨日
MITを使用
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
OSV.dev に ipcam-mcp@0.5.1 の登録はありません
このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月15日
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/aidev-iprokszin-ipcam-mcp)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は一昨日、最新バージョン(0.5.1)がレジストリに届いたのは10 日前です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。
同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| これ IP cameras (ONVIF/RTSP) | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| ライセンス | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
An MCP server that lets Claude Code, or another MCP client, see through and control the IP cameras on your local network (ONVIF + RTSP): snapshots, video clips, pan/tilt and change detection, all handled locally.
Any ONVIF camera should work. See known cameras for what has been tested.
Once a camera is added, ask in plain words, for example:
PATH (it installs Python 3.13+ and the dependencies for you)sudo apt install ffmpegPick one. All of them run the ipcam-mcp package from PyPI and need ffmpeg and, except pipx, uv (see Prerequisites).
/plugin install ipcam --marketplace aidev-iprokszin/ipcam-mcpOn Claude Code older than 2.1.275, run /plugin marketplace add aidev-iprokszin/ipcam-mcp, then /plugin install ipcam@ipcam-mcp. The plugin runs the server from a lockfile (every dependency pinned with hashes). Update it with claude plugin update ipcam@ipcam-mcp, which also updates the server; a new server version reaches the plugin shortly after its PyPI release.
claude mcp add ipcam -s user -- uvx ipcam-mcpuvx ipcam-mcp. See Other MCP clients.uv tool install ipcam-mcp (or pipx install ipcam-mcp), then configure your client to run ipcam-mcp. Update with uv tool upgrade ipcam-mcp (or pipx upgrade ipcam-mcp).Then add your first camera.
add_camera, which asks for the username and password in a login form, so they never pass through the model. Before you type the password, check that the IP in the form is your camera's. Without a config file the server starts with no cameras; add_camera creates cameras.toml and the camera's secrets file. See Managing cameras for the other management tools and for clients that cannot show forms.~/.config/ipcam-mcp/secrets.env: CAMERA_IP=192.168.x.y
CAMERA_USER=... CAMERA_PASSWORD=...
The host is a bare IP address or hostname: no `rtsp://`, user name, port or path (ports go
in Camera settings). Make it readable only by you: chmod 600 . The server warns at startup if other users can read it.
cameras.example.toml to ~/.config/ipcam-mcp/cameras.toml (or point IPCAM_MCP_CONFIG at another path) and adjust the camera name / variable names. Only variable *names* go in this file, never the secrets themselves. Use type = "onvif".After editing cameras.toml by hand while the server runs, ask Claude to reload the cameras (reload_cameras).
All optional, set in the camera's section of cameras.toml. A wrong type is reported when the config loads.
| Setting | Type | Default |
|---|---|---|
onvif_port | integer 1–65535 | 80 |
rtsp_port | integer 1–65535 | the port in the camera's stream URI, else 554 (a value you set always wins) |
invert_pan | boolean | false |
ptz | boolean | false |
stream_high | path starting with / | looked up over ONVIF |
stream_low | path starting with / | looked up over ONVIF |
ptz = false means the camera has no pan/tilt tools. Set stream_high/stream_low if the ONVIF lookup fails or picks the wrong stream. Set invert_pan = true if ptz_move left turns the view to the right. Some brands need other values; see known cameras.
Any client that supports stdio servers (Cursor, VS Code, Codex CLI, …) can run the same command: uvx ipcam-mcp, or uv --directory /absolute/path/to/ipcam-mcp run ipcam-mcp for a clone.
Claude Desktop on Windows: the server runs inside WSL2, so install uv and ffmpeg there (see *Prerequisites*). In Claude Desktop, open *Settings → Developer → Edit Config*, add the ipcam entry below to mcpServers and keep the rest of the file:
{
"mcpServers": { "ipcam": { "command": "wsl.exe", "args": ["-e", "/home/ /.local/bin/uvx", "ipcam-mcp"] } } }
Replace `<you>` with your WSL user name (`which uvx` in WSL shows the path). With several WSL
distributions, add "-d", " " before "-e". Then quit Claude Desktop from the tray icon (closing the window is not enough) and start it again. The server uses the same cameras.toml and media folder inside WSL as Claude Code there. Use *Edit Config* rather than a fixed path: the Microsoft Store version keeps the file under %LOCALAPPDATA%, not %APPDATA%\Claude. For a clone, use "args": ["-e", "/home/ /.local/bin/uv", "--directory", "/home/ /path/to/ipcam-mcp", "run", "ipcam-mcp"].
If the camera can't be reached from WSL (nc -zv 554 fails), enable mirrored networking in %UserProfile%\.wslconfig:
[wsl2]
networkingMode=mirrored
then run `wsl --shutdown` from Windows.
| Tool | What it does |
|---|---|
list_cameras(include_removed=False) | Configured cameras with their uid, scene and capabilities (camera, ptz); include_removed=true also lists removed cameras whose files are still on disk |
camera_snapshot(camera=None, quality="high", crop=None, region=None, from_path=None) | Returns the picture (≤1280 px wide) and saves the full-size JPEG. crop=[x, y, w, h] (fractions 0–1) or region (top-left, top, top-right, left, center, right, bottom-left, bottom, bottom-right) returns a detail at full resolution. from_path reuses an earlier snapshot (for example one from scene_timeline) without contacting a camera; camera is then optional |
camera_save_baseline(camera, name, quality="high") | Takes a snapshot and keeps it as a named reference (e.g. door-closed) |
camera_compare(camera, baseline=None, quality="high") | Takes a snapshot and reports what changed against the camera's previous snapshot in its current scene, or against a named baseline saved in that scene |
camera_record(camera, seconds=10, quality="high") | Records 1–60 s to an mp4, returns its path |
ptz_move(camera, direction, amount="small") | Pan/tilt left/right/up/down by small/medium/large; waits for the move to finish and returns the final position if the camera reports one |
ptz_list_presets(camera) | Saved positions |
ptz_goto_preset(camera, preset) | Move to a preset by name or token |
ptz_save_preset(camera, name, overwrite=False) | Saves the current position as a preset; refuses an existing name unless overwrite=true |
ptz_remove_preset(camera, preset) | Deletes a preset by name or token (cannot be undone) |
list_scenes() | Every scene with its cameras, removed cameras that watched it, the first and last capture and counts |
scene_snapshot(scene, quality="high") | A snapshot from every camera in the scene, each labelled with the camera's name; a camera that fails reports its error without failing the others; the call fails only if every camera does |
scene_compare(scene, baseline=None, quality="high") | camera_compare for every camera in the scene, labelled the same way |
scene_record(scene, seconds=10, quality="high") | Records 1–60 s with every camera in the scene at the same time, labelled the same way; returns each clip's path and size. Combining the clips (split screen etc.) is up to you |
scene_timeline(scene, start=None, end=None, limit=50) | The scene's snapshots, recordings and baselines, newest first, from every camera that watched it (removed ones too). start/end: YYYY-MM-DD (whole day) or an ISO datetime; limit 1–500 |
camera is a camera's name: its section name in cameras.toml. quality="high" uses the camera's main stream (its resolution is set on the camera), "low" the sub stream (smaller, quicker). Media is saved to the camera's own folder, / / _ .jpg|.mp4 (media_dir defaults to ~/.local/share/ipcam-mcp/media).
Tool hints. Every tool carries MCP annotations so clients can tell what it does: list_cameras, list_scenes, scene_timeline and ptz_list_presets are read-only; camera_save_baseline, ptz_save_preset, ptz_remove_preset, remove_camera and delete_camera may replace or delete data; everything else only adds files or moves the camera. Snapshots and recordings are not marked read-only because they save files. These are hints for the client; the server's own safeguards (such as delete_camera's approval form) still apply.
Compare and crop. camera_compare lists the grid cells that changed (the same names as region) and a box around them. It compares the frames at the size the camera sends them, so the stream resolution you set on the camera decides how small a change it can notice; a reference of another size is scaled to the new frame. Pass a changed cell as region to camera_snapshot, ideally with from_path set to the snapshot you just looked at, to see it closer. Baselines live in / /baselines/ as a JPEG plus a small JSON file.
Instead of editing cameras.toml by hand you can let Claude add, rename, remove and delete cameras. This is on by default. To turn it off, set allow_management = false in cameras.toml (see cameras.example.toml), then run /mcp reconnect ipcam; the flag is only read at startup. Claude Code still asks before each tool call unless you allowlist it; if you allowlist the camera tools, consider leaving remove_camera, delete_camera and ptz_remove_preset off the list.
add_camera logs into whatever host it is given. Before you type a password into the login form, check that the IP it shows is your camera's (from the camera's app or your router), not one the agent picked up elsewhere.
| Tool | What it does |
|---|
| `add_camera(name, host, credentials_via="form", onvif_port=None, scene=No