プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

own-words

作者:alexslkgitバージョン 1.0.0i★ –iクラウドで動く
レジストリ名io.github.alexslkgit/own-words

インストール

概要

作者による説明(英語の原文)

Turn notes into a study deck: answer each card in your own words, then compare.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: 文書・表計算・事務作業

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://own-words-mcp.alexslkmain.workers.dev/mcp

ターミナルでこれを実行します

claude mcp add --transport http own-words https://own-words-mcp.alexslkmain.workers.dev/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "own-words": {
      "url": "https://own-words-mcp.alexslkmain.workers.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "own-words": {
      "type": "http",
      "url": "https://own-words-mcp.alexslkmain.workers.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://own-words-mcp.alexslkmain.workers.dev/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月8日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • create_deck

    Validate a study-deck JSON object and return the shareable own-words link with the card count.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月9日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント alexslkgit で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    121ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    1件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

文書・表計算・事務作業のほかのサーバーとの比較i

  • このカテゴリのほかの3611件のうち0%よりスターが多い
  • このカテゴリのほかの3611件のうち56%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの3611件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

own-wordsは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.0)がレジストリに届いたのは25 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Agent-Native Calendar, Excel MCP Server, MCP Server for Excel

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Agent-Native Calendar

Agent-Native Google Calendar - manage events, sync, and public booking

作者:BuilderIO広く使われている★ 76202 か月前更新

クラウドで動く

Excel MCP Server

Create and edit Excel files with AI: charts, PivotTables, formulas. No Excel needed.

作者:haris-musa広く使われている↓ 5万/週★ 4276今日更新

パソコンで動く

MCP Server for Excel

Excel automation for AI - Sheets, Power Query, DAX, VBA, Tables, Ranges and more. Windows only.

作者:sbroenne成長中↓ 4321/週★ 8476 日前更新

パソコンで動く

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

own-words

own-words turns a topic into a deck of question cards. Each card asks a question, you type your answer, and only then does the prepared answer appear; you mark it "I knew it" or "see again" and go on.

I have ADHD. Reading a prepared answer first always felt like understanding, and then the next real question found out that it was not. Typing my own answer first is what stuck, so the deck now makes me do it before it shows me anything.

New here? Try the 2-minute tutorial.

Try it, nothing to install

https://alexslkgit.github.io/own-words/

Two decks are on that page: "How own-words works", 8 cards, and "Claude Code in 30 questions", 30 cards. Open one, answer three or four cards, and you have seen the whole thing.

Make your own deck

No account for any of these.

Paste deck JSON into the box on the landing page. A fenced reply or a line of chat around the JSON is fine; the box finds the deck inside it.

Press "Copy the prompt" on the same page, hand the prompt to any assistant along with your topic, and paste back what it replies with.

Install the Claude Code plugin:

claude plugin marketplace add alexslkgit/own-words

claude plugin install own-words@own-words

Then run /own-words with a topic or a file. It writes .deck.json in the current directory, checks it, and prints the link that opens it.

A deck is one JSON file: a key, a title, and blocks of cards, each card a question and an answer. The two decks above are in decks/ in exactly that form, with nothing in them the format does not give you. The file is also how a deck moves to another device: the link for the 30-card demo is about 17 KB because the whole deck travels inside it, so keep long decks as files and share the link for short ones.

A card may also carry a weight, "w": 1 to 100. When any card in a deck has one, three stops in the header show the whole deck, only cards weighted 60 and up, or only 85 and up, so a short session covers what matters most. A card with no weight is always shown.

When an answer is too hard to read

Once the answer is shown, tap the words you do not follow, or select a phrase, then press "Simpler, not longer". The page builds a request whose word budget is the answer's own length; send it to Claude or any chat and paste the reply back. The page refuses a reply with more words than the budget, so the card gets clearer without growing. With the plugin, Claude Code also writes the simpler version into your .deck.json beside the original answer, which it never changes. For example, with "existential" and "witness table" marked:

Before, 30 words: some names one concrete type that the compiler knows but hides, while any is an existential box resolved at runtime through a witness table, so its calls cannot be specialized.

After, 26 words: some: one real type the compiler knows, just unnamed. any: a box (fits any matching type) opened at run time, so its calls cannot be specialized.

Where the deck lives

The link carries the whole deck inside the URL, after #d=, compressed with lz-string. A URL fragment is never sent in the HTTP request, so a deck link opens without any server ever holding the deck. deck.html renders whatever deck it is handed and knows nothing else.

Every deck you open is kept in this browser's localStorage, under ownwords:decks: and ownwords:index, together with your answers and marks; the landing lists them under "My decks". There is no account and nothing you write is stored on a server. Clearing site data for the page drops the decks and the progress, and "My decks" empties; the .deck.json file or the link brings a deck back, the progress does not come back.

The one time your text moves is the copy button on a card page. It builds a plain text form of the deck: every card you touched, with the question, your own wording, and your mark, then the numbers of the cards you left alone. Nothing is copied until you press it. Pasting that form back into the chat that wrote the deck is how you ask for harder cards.

Plain HTML and JavaScript, no build step, one vendored dependency (lz-string). The pages ask Google Fonts for two typefaces; block that and everything still works in a system font, including from a file:// path.

connector/ is a small remote MCP server so claude.ai can hand you a deck link directly. A public instance runs at https://own-words-mcp.alexslkmain.workers.dev/mcp: in claude.ai open Settings > Connectors > Add custom connector, paste that URL and pick No sign-in. It keeps no state and stores nothing, the deck goes into the link. To run your own, see connector/README.md.

Uninstall

claude plugin uninstall own-words@own-words

claude plugin marketplace remove own-words

The site needs nothing installed, so closing the tab is enough.

Requirements

A modern browser, for the site and for any deck link. The plugin needs Claude Code.

This is one person's tool at version 0.3.0. I use it daily on my own decks; the English strings in it are new, so if a line reads oddly, that is why.

If you tried it on something you actually needed to learn, did writing your own answer first change what you remembered a week later? Open an issue and tell me: https://github.com/alexslkgit/own-words/issues

MIT, see LICENSE.

PopNxに聞く