What it does
Design, simulate and optimize optical thin-film coatings with the OpenFilters engine.
- Connects パソコンで動く
- Account or key No key needed
- Category ゲーム・スポーツ・料理・学習
この順位の理由
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 23/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 12/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 35/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
インストール
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
MCP for OpenFilters をインストールして。https://mcp.popnx.com/i/bbrunoesteves-mcp-for-openfilters.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月13日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
AI にインストールしてもらう
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server MCP for OpenFilters を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、MCP for OpenFilters のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
uv を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --version- バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
uv --version一度入れれば、uv を使うすべてのツールで使えます
パソコン版 Claude アプリの設定ファイルを開く
SettingsDeveloperEdit Config
この設定を貼り付けて保存
{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } }Claude を終了してもう一度開く
試してみる
MCP for OpenFilters を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が MCP for OpenFilters を使っていると言うか、回答に MCP for OpenFilters のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ MCP for OpenFilters につなげません
MCP for OpenFilters はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
代わりにできること
A · MCP for OpenFilters につなげるアプリを使う
- 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
- 先にパソコンへ Python (uv) を入れてください(1 回だけ)
- 先にパソコンへ Python (uv) を入れてください(1 回だけ)
- 先にパソコンへ Python (uv) を入れてください(1 回だけ)
B · ゲーム・スポーツ・料理・学習 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
- ShipSwift✓ ChatGPT
- Anime Garden✓ ChatGPT
- Summer Engine✓ ChatGPT
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server MCP for OpenFilters を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user for-openfilters -- uvx mcp-for-openfilters 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、MCP for OpenFilters のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
uv を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --version- バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
uv --version一度入れれば、uv を使うすべてのツールで使えます
ターミナルを開く
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
このコマンドを貼り付けて Enter
claude mcp add --scope user for-openfilters -- uvx mcp-for-openfiltersClaude Code で /mcp と入力
MCP for OpenFilters が一覧にあり、接続済みと表示されれば OK です
試してみる
MCP for OpenFilters を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が MCP for OpenFilters を使っていると言うか、回答に MCP for OpenFilters のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server MCP for OpenFilters を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、MCP for OpenFilters のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
uv を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --version- バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
uv --version一度入れれば、uv を使うすべてのツールで使えます
Cursor の AI チャットを Agent モードで開く
試してみる
MCP for OpenFilters を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が MCP for OpenFilters を使っていると言うか、回答に MCP for OpenFilters のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server MCP for OpenFilters を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "for-openfilters": { "type": "stdio", "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、MCP for OpenFilters のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
uv を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --version- バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
uv --version一度入れれば、uv を使うすべてのツールで使えます
VS Code の AI チャットを Agent モードで開く
試してみる
MCP for OpenFilters を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が MCP for OpenFilters を使っていると言うか、回答に MCP for OpenFilters のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください
JSON 設定は下の「開発者向け」にあります
開発者向け:ターミナルのコマンドと JSON 設定
パソコンにインストール
Claude Code
claude mcp add --scope user for-openfilters -- uvx mcp-for-openfiltersClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"for-openfilters": {
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"for-openfilters": {
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"for-openfilters": {
"type": "stdio",
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
ひと目でわかる
使えるアプリ
このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
できること
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
基本チェックi
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック
- ✓ 合格
作者とリポジトリが一致
レジストリ名は、リポジトリを所有するGitHubアカウント BBrunoEsteves で確認済みです
- ✓ 合格
今もメンテナンスされている
コードの最終更新:12 日前
- ✓ 合格
ライセンスがある
GPL-2.0を使用
- – 対象外
エンドポイントが応答する
これはパソコンで動くため、インターネット上のエンドポイントはありません
- – 対象外
OAuthでサインイン
パソコンで動き、代わりにローカルの設定を使います
- … 未チェック
ツールの説明に隠れた指示がない
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
公開済みの脆弱性(OSV.dev)
OSV.dev に mcp-for-openfilters@0.2.2 の登録はありません
このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月15日
作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/bbrunoesteves-mcp-for-openfilters)話し合い
質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
ユーザーレビュー
まだレビューはありません
ゲーム・スポーツ・料理・学習のほかのサーバーとの比較i
- このカテゴリのほかの1611件のうち0%よりスターが多い
- このカテゴリのほかの1611件のうち69%より最近レジストリに公開
- 基本チェックの結果が、このカテゴリのほかの1611件のうち99%と同じかそれ以上
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
よくある質問
MCP for OpenFiltersは安全ですか?
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
どんなキーやコードが必要ですか?
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
パソコンで動きますか、それともクラウドですか?
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
今もメンテナンスされていますか?
GitHubリポジトリの最終更新は12 日前、最新バージョン(0.2.2)がレジストリに届いたのは12 日前です。
どのアプリで使えますか?
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。
代わりに使えるものは?
同じカテゴリには:Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch
似た働きのほかの候補
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
WilmAI
Finland's Wilma school system for parents and students: schedule, homework, exams and messages.
Lumify Sports Intelligence
Schedules, scores, odds, splits & explainable AI bet confidence — 8+ sports, free instant key.
Savecraft
Savecraft serves real save game data and expert game knowledge to AI assistants.
GoodWatch
Find movies and TV shows, track watches, and get suggestions based on your taste.
| これ MCP for OpenFilters | Anime Garden | WilmAI | Lumify Sports Intelligence | Savecraft | GoodWatch | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | はい | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 3/3 | 4/4 | 3/4 | 4/4 |
| ライセンス | GPL-2.0 | AGPL-3.0 | MIT | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のREADME
READMEを開く
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
MCP for OpenFilters
*An unofficial connector built on OpenFilters: not affiliated with or endorsed by the OpenFilters authors or Polytechnique Montréal.*
Design, simulate and optimize optical thin-film coatings by talking to Claude.
This project is an MCP server around the calculation core of [OpenFilters](https://www.polymtl.ca/larfis/en/links) (Stéphane Larouche and Ludvik Martinu, Polytechnique Montréal), ported to Python 3 and run without its GUI. Claude plans the work and reads compact summaries; the server does the computing — in parallel on all CPU cores — and writes full results to disk, including .ofp project files that open in the OpenFilters GUI.
Claude orchestrates; the server computes. One tool call can launch a whole campaign.
Quick start
Pick the one that matches how you use Claude (details under Installation):
| You use | Do this |
|---|---|
| Claude Desktop | Download mcp-for-openfilters- .mcpb from the latest release and open it: Claude Desktop installs the extension. |
| Claude Code | claude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters (needs uv), or the plugin: /plugin marketplace add BBrunoEsteves/mcp-for-openfilters, then /plugin install mcp-for-openfilters@mcp-for-openfilters |
| Any MCP client, or no uv | Run uvx mcp-for-openfilters, pip install mcp-for-openfilters (PyPI), or the installer from the release page, which also registers it in Claude Desktop and Claude Code. |
Then, in a new chat: *"Run the MCP for OpenFilters server_info tool"*, and try *"Design an antireflection coating for BK7 from 430 to 670 nm with TiO2 and SiO2."* It is also listed in the official MCP Registry as io.github.BBrunoEsteves/mcp-for-openfilters.
Built and tested with Claude. The server follows the open MCP standard, but it has so far been
developed and tested only with Claude (Claude Desktop and Claude Code). Other MCP clients may work,
but they are untested: tool descriptions, plots and long-running jobs may behave differently there.
What it can do
| Area | Tools |
|---|---|
| Materials | list_materials, get_material_index, add_material (constant, Cauchy, Sellmeier, n,k tables from files), search_refractiveindex + import_refractiveindex_material (any of the ~3,500 entries of the refractiveindex.info database, downloaded on demand) |
| Single design | describe_design, compute_spectrum (R/T/A, phase, GD, GDD; s/p/unpolarized or any polarization angle; any angle of incidence; reverse side), compute_angle_scan, compute_color, compute_electric_field, compute_monitoring_curves (chosen wavelengths or spectroscopic; reverse side) |
| Targets & merit | evaluate_design, layer_sensitivity |
| Optimization | optimize_design — OpenFilters' refinement, needle and step methods |
| Temperature | thermal_sensitivity (how a peak moves per index and thickness change of each material; dλ/dT, kelvin per FWHM, athermal dn/dT), thermal_sweep (peak versus temperature) — tunable and athermal filters |
| Campaigns | run_batch (parameter sweeps), run_optimization_campaign (many starts → ranked → optional yield stage), tolerance_analysis (Monte Carlo yield with thickness and index errors), simulate_random_errors (OpenFilters' Preproduction: mean, standard deviation and worst case of the curves) |
| Jobs | job_status, get_results, list_jobs, cancel_job — results survive a server restart |
| Files | load_project, save_project (native .ofp) |
Example requests to Claude:
- *"Design a dichroic on BK7 with R > 99 % at 532 and 1064 nm and T > 90 % at 633 nm for 0–20°, at most 40 layers of TiO2/SiO2. Run 100 needle optimizations from random starts and rank the best 10 by yield at ±1 % thickness error."*
- *"Add my ALD Al2O3 from this ellipsometry file and sweep the AR coating thickness ±10 %."*
- *"Find thin-film HfO2 data on refractiveindex.info, import it and redo the mirror with it."*
- *"Where is the electric-field peak of this mirror at 1064 nm, and what monitoring signal should I expect at 633 nm at the end of each layer?"*
Ready-made workflows (prompts) appear as / commands in Claude Code and in the attachment menu of Claude Desktop: design an antireflection coating, a mirror, an edge filter or dichroic, a narrow band-pass filter, and review a design for manufacturing. The design-format guide, the material list and the OpenFilters example projects are available as resources (openfilters://guide, openfilters://materials, openfilters://examples/ ). Long optimizations and yield analyses report progress to apps that show it.
Installation
Requires Python ≥ 3.10. OpenFilters itself does not need to be installed: its calculation engine is built in (the OpenFilters GUI is only useful to open the .ofp files).
Claude Desktop extension (one click)
From the latest release, download mcp-for-openfilters- .mcpb and open it (or drag it onto Claude Desktop's Settings → Extensions). Claude Desktop runs it with uv, which fetches the server from PyPI.
Claude Code plugin
In Claude Code:
/plugin marketplace add BBrunoEsteves/mcp-for-openfilters
/plugin install mcp-for-openfilters@mcp-for-openfilters
The plugin runs the server with uvx (see claude-plugin/README.md for what it runs and downloads).
With uv (one command)
With uv installed, the server runs straight from PyPI, with the right package for your computer chosen automatically:
claude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters
For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config), then fully quit and reopen Claude Desktop:
{"mcpServers": {"mcp-for-openfilters": {"command": "uvx", "args": ["mcp-for-openfilters"]}}}
uvx keeps its own cached environment; uvx mcp-for-openfilters@latest picks up a new version.
With the installer
From the release page, download install_mcp_for_openfilters.py and the package for your computer (or all .whl files) into one folder, then:
python install_mcp_for_openfilters.py
It creates a private environment in ~/.mcp-for-openfilters, installs the package, registers the server in Claude Desktop (backing up its settings) and Claude Code, and runs a self-test. Then fully quit and reopen Claude Desktop. --uninstall removes it; --from-github downloads the packages with the GitHub CLI.
Packages are built for Windows (64-bit), Linux (x86-64) and macOS (Apple Silicon), Python 3.10–3.14, with the compiled fast core included: no compiler needed.
Manually
pip install mcp_for_openfilters-<version>-<python>-<platform>.whl
claude mcp add --scope user mcp-for-openfilters -- mcp-for-openfilters
For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config):
{"mcpServers": {"mcp-for-openfilters": {"command": "<full path to mcp-for-openfilters>"}}}
Upgrading from openfilters-mcp (before 0.2.0)
The project was called *openfilters-mcp* until version 0.2.0. Fully quit Claude Desktop and Claude Code, then run the new installer: it removes the old openfilters registration and the old private environment (~/.openfilters-mcp) and registers mcp-for-openfilters. Your data folder ~/OpenFilters-MCP is kept and still used, and the old OPENFILTERS_MCP_* environment variables are still read. After a manual install, pip uninstall openfilters-mcp and replace the openfilters entry in your Claude settings.
From source (development)
git clone https://github.com/BBrunoEsteves/mcp-for-openfilters
cd mcp-for-openfilters python -m venv .venv .venv/Scripts/pip install -e ".[dev]" # .venv/bin/pip on macOS/Linux python dev/fetch_compiled.py # fast C++ core compiled by GitHub Actions (or build it locally)
Configuration
| Environment variable | Default | Meaning |
|---|---|---|
MCP_FOR_OPENFILTERS_HOME | ~/MCP-for-OpenFilters | data folder: materials/, jobs/, projects/, outputs/ |
MCP_FOR_OPENFILTERS_WORKERS | CPU count − 1 | parallel worker processes for jobs |
The names used before 0.2.0 (OPENFILTERS_MCP_HOME, OPENFILTERS_MCP_WORKERS) still work, and an existing ~/OpenFilters-MCP folder is used when ~/MCP-for-OpenFilters does not exist.
Conventions
- wavelengths and thicknesses in nm, angles in degrees, R/T/A as fractions (0–1);
- complex index N = n − ik (k ≥ 0 absorbs), as in OpenFilters and Macleod;
- layers are listed from the substrate outward;
- the merit function is OpenFilters' χ² = Σ ((target − value)/tolerance)², with satisfied inequality targets contributing zero.
A design:
{"substrate": "FusedSilica", "incident_medium": "void", "center_wavelength": 550,
"layers": [{"material": "TiO2", "thickness": 58.6}, {"material": "SiO2", "qwot": 1}]}
or with a stack formula: {"formula": {"formula": "(HL)^8 H", "materials": {"H": "TiO2", "L": "SiO2"}}}.
Materials given as n,k tables have no data outside their wavelength range. There the design field "table_extrapolation" decides: "hold" (default: n,k stay at the value at the nearest end of the data), "openfilters" (OpenFilters' own extrapolation, identical to its GUI) or "refuse". Every result computed outside the data says so, with the n,k used and what the other choice would give; optimizations, campaigns and yield analyses do not start until the choice is made (Claude asks you).
A target:
{"kind": "R", "from": 1000, "to": 1100, "step": 5, "value": 0.99, "tolerance": 0.005,
"inequality": ">=", "angle": 0, "polarization": "unpolarized"}
Validation
The test suite (pytest) checks the ported core against analytic results (quarter-wave stacks) and an independent transfer-matrix implementation (dispersive dielectrics, absorbing metals, 0–60°, s/p/unpolarized; agreement < 1e-9) and textbook closed forms (quarter-wave antireflection and absentee layers, V-coat zero, Brewster angle, quarter-wave stack peak reflectance and stop-band width), round-trips every example project through .ofp files, and runs the refinement and needle optimizations of the OpenFilters examples.
How the port was made
src/openfilters_core is generated from the original OpenFilters 1.1.1 sources by tools/port_from_py2.py, an auditable script (mechanical Python 2 → 3 conversions, a short list of targeted fixes, package-relative imports). The _abeles C++ extension uses the Python 3 C-API port by Emil Kleijn; _moremath is ported by the same script. See src/openfilters_core/PROVENANCE.md.
Privacy
Everything runs on your computer: no data is sent anywhere and there is no telemetry. The only network access is downloading public refractiveindex.info data when you ask for it. See PRIVACY.md.
Citing
If you use this in published work, please cite OpenFilters:
S. Larouche and L. Martinu, "OpenFilters: open-source software for the design, optimization, and
synthesis of optical filters," *Applied Optics* 47, C219–C230 (2008).
Contact
- Bug reports and feature requests: GitHub Issues (please include the ou