プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Tapebasis

作者:giraygokirmakバージョン 1.2.1i★ 0iパソコンで動くリポジトリ ↗
レジストリ名io.github.giraygokirmak/tapebasis

インストール方法

What it does

Market data from multiple independent providers, compared with clear provenance.

  • Connects パソコンで動く
  • Account or key No key needed
  • Category 会計・財務・税務

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気14/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ12/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア26/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: 13 (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

チェック 3/3 合格 · あなたのパソコンで動きます

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

先にパソコンへ Node.js を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

  1. Node.js を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    node -v
    • バージョン番号(例 v26.13.1)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です

    Node.js のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v

    一度入れれば、Node.js を使うすべてのツールで使えます

  2. パソコン版 Claude アプリの設定ファイルを開く

    SettingsDeveloperEdit Config

  3. この設定を貼り付けて保存

    コマンドを確認中 · 確認が通るとコピーボタンが出ます

  4. Claude を終了してもう一度開く

  5. 試してみる

    Tapebasis を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Tapebasis を使っていると言うか、回答に Tapebasis のツール名が出れば接続成功です

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Tapebasis につなげません

Tapebasis はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Tapebasis につなげるアプリを使う

  • 先にパソコンへ Node.js を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • 先にパソコンへ Node.js を入れてください(1 回だけ)
  • 先にパソコンへ Node.js を入れてください(1 回だけ)
  • 先にパソコンへ Node.js を入れてください(1 回だけ)

B · 会計・財務・税務 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

先にパソコンへ Node.js を入れてください(1 回だけ)

  1. Node.js を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    node -v
    • バージョン番号(例 v26.13.1)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です

    Node.js のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v

    一度入れれば、Node.js を使うすべてのツールで使えます

  2. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  3. このコマンドを貼り付けて Enter

    コマンドを確認中 · 確認が通るとコピーボタンが出ます

  4. Claude Code で /mcp と入力

    Tapebasis が一覧にあり、接続済みと表示されれば OK です

  5. 試してみる

    Tapebasis を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Tapebasis を使っていると言うか、回答に Tapebasis のツール名が出れば接続成功です

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

先にパソコンへ Node.js を入れてください(1 回だけ)

  1. Node.js を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    node -v
    • バージョン番号(例 v26.13.1)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です

    Node.js のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v

    一度入れれば、Node.js を使うすべてのツールで使えます

  2. このボタンで Cursor を開く

    コマンドを確認中 · 確認が通るとコピーボタンが出ます

  3. Cursor の AI チャットを Agent モードで開く

  4. 試してみる

    Tapebasis を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Tapebasis を使っていると言うか、回答に Tapebasis のツール名が出れば接続成功です

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

先にパソコンへ Node.js を入れてください(1 回だけ)

  1. Node.js を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    node -v
    • バージョン番号(例 v26.13.1)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です

    Node.js のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v

    一度入れれば、Node.js を使うすべてのツールで使えます

  2. このボタンで VS Code を開く

    コマンドを確認中 · 確認が通るとコピーボタンが出ます

  3. VS Code の AI チャットを Agent モードで開く

  4. 試してみる

    Tapebasis を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Tapebasis を使っていると言うか、回答に Tapebasis のツール名が出れば接続成功です

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Tapebasis を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

コマンドを確認中 · 確認が通るとコピーボタンが出ます

Claude Desktop (claude_desktop_config.json)

コマンドを確認中 · 確認が通るとコピーボタンが出ます

Cursor (~/.cursor/mcp.json)

コマンドを確認中 · 確認が通るとコピーボタンが出ます

VS Code (mcp.json)

コマンドを確認中 · 確認が通るとコピーボタンが出ます

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

週あたりのダウンロードi
427/週
接続方法
パソコンで動く
最新バージョンi
1.2.1
レジストリ公開日i
2026年11月19日
コードの最終更新i
2026年11月19日
作者
giraygokirmak
パッケージ
npm: tapebasis
pypi: tapebasis
ウェブサイト
github.com
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント giraygokirmak で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:今日

  • ✓ 合格

    ライセンスがある

    MITを使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

まだ確認していません

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/giraygokirmak-tapebasis.svg)](https://mcp.popnx.com/en/servers/giraygokirmak-tapebasis)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

会計・財務・税務のほかのサーバーとの比較i

  • このカテゴリのほかの3440件のうち0%よりスターが多い
  • このカテゴリのほかの3440件のうち99%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの3440件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Tapebasisは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は今日、最新バージョン(1.2.1)がレジストリに届いたのは今日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.js, Python (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:SolidInvoice, Signal8, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

作者:SolidInvoice成長中★ 99110 日前更新

クラウドで動く✓ 提供元 · solidinvoice.co

Signal8

SEC filings, dilution, insider & institutional ownership, and political-trade data for AI agents.

作者:signal8ai成長中↓ 431/週★ 42510 日前更新

パソコンでもクラウドでも✓ 提供元 · signal8.ai

Journalit

Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.

作者:Cursivez成長中★ 26111 日前更新

クラウドで動く✓ 提供元 · journalit.co

Beancount.io

Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.

作者:bex-co成長中★ 702 リポジトリ全体のスター44 日前更新

クラウドで動く✓ 提供元 · beancount.io
似たものと比べる
これ
Tapebasis
SolidInvoiceSignal8JournalitBeancount.ioTapetide - Indian Stock Market MCP
動く場所パソコンにインストールが必要クラウドで動き、インストール不要クラウドでもパソコンにインストールでも使えるクラウドで動き、インストール不要クラウドで動き、インストール不要クラウドでもパソコンにインストールでも使える
キーが必要いいえいいえはいいいえいいえはい
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/34/65/54/44/45/5
ライセンスMITMITMITNOASSERTIONMITMIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Multiple tapes, one basis. An MCP server that serves TradingView, Finviz, Yahoo Finance, StockAnalysis and Bloomberg market data together, cross-checks every overlapping figure, and labels each response with the provider that actually produced it.


*Basis* is the finance term for the price difference between two markets quoting the same asset. *Tape* is the ticker tape. Tapebasis is the spread between multiple feeds, measured on every call: zero when they agree, reported when they don't.

The point is redundancy you can *see*. Every provider that could answer a field is asked, natively in parallel. When several answer, the data is cross-checked. When only one answers, you get the data, clearly marked as single-source. When none answers, you get NONE instead of a plausible-looking number. And because every provider scrapes or calls an undocumented upstream, a background monitor probes every endpoint and reports API/schema drift inside ordinary tool responses.

Each provider is fetched natively: TradingView's own scanner and chart websocket, Finviz's HTML and JSON islands, Yahoo's chart API, StockAnalysis's quote API, Bloomberg's quote pages. No leg proxies another: a provider that quietly forwards a competitor's numbers is worthless as a cross-check.

Bloomberg and StockAnalysis are the other two legs, asked like the rest, in parallel, on the same call. The properties that make each of them different from a plain live feed are reported rather than hidden by a tolerance. Bloomberg's equity and index prints are exchange-delayed (exchangeDelay is 15 Minutes), so a pair of prints further apart than the print-time guard allows is reported as not comparable with the delay named, instead of being called a provider disagreement; it also never wins the freshness tie-break against a live print. Its static fields are penny-identical to Yahoo's, so agreement between those two is weak corroboration, not two independent witnesses. What it adds is its own quote pages and the government benchmark yield curve, which no other provider here publishes. StockAnalysis covers US equities and ETFs only, and its quote surface is the same consolidated tape Yahoo serves, so that pair is weak corroboration for the same reason; indices, FX, crypto, commodities and foreign listings are reported as not carried instead of requested.


The data_provider contract

Every tool result carries exactly one of eight values. It states coverage, never agreement:

ValueMeaning
ALLEvery provider that was asked answered. Coverage is complete for this call.
PARTIALMore than one answered, but a provider that was asked produced nothing. The values are served; errors says why the missing leg is missing.
TRADINGVIEWOnly TradingView answered. Served, but not corroborated.
FINVIZOnly Finviz answered. Served, but not corroborated.
YAHOOOnly Yahoo Finance answered. Served, but not corroborated.
SAOnly StockAnalysis answered. Served, but not corroborated; US equities and ETFs only.
BLOOMBERGOnly Bloomberg answered. Served, but not corroborated; its quote can be delayed.
NONENo provider could supply it. No value is presented.

ALL means "every provider asked answered", not "they agree". Agreement is a separate axis, and it lives in comparisons[].match. A provider that was asked and failed makes the response PARTIAL, never ALL: the label describes coverage, and a listed error is missing coverage. providers_answered names exactly which providers contributed. The positive agreement notice appears only after a real agreeing comparison. Invalid pairs keep their readings, match: null and a not_comparable reason; a resolved symbol that returns no data is NO_DATA, not NOT_ATTEMPTED.

The same envelope also contains:

{

"data_provider": "ALL", "verification": "MULTI_SOURCE", // MULTI_SOURCE | SINGLE_SOURCE | UNAVAILABLE "providers_answered": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA", "BLOOMBERG"], "notice": "Every provider asked answered (TradingView, Finviz, Yahoo Finance, StockAnalysis and Bloomberg). ...", // names whichever answered "data": { ... }, // the reconciled payload, one value per field "fields": { // per-field provenance, never a joint label "price": { "source": "FINVIZ", "supplied": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA"], "compared": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA"], "agreement": true }, "peers": { "source": "FINVIZ", "supplied": ["FINVIZ"], "compared": [], "agreement": null } }, "freshness": { // why data holds the value it does "tradingview": "2026-11-04T00:59:53+00:00", "finviz": "2026-11-04T10:42:00+00:00", "yahoo": "2026-11-03T21:00:01+00:00", "sa": "2026-11-03T21:00:01+00:00", // same consolidated tape as Yahoo "bloomberg": "2026-11-04T10:27:00+00:00", // 15 min behind, so it cannot win "chosen": "FINVIZ", "decision": "newest", // newest | tie | no_timestamp "newest_print": "2026-11-04T10:42:00+00:00", "reason": "FINVIZ printed most recently (2026-11-04T10:42:00+00:00)" }, "comparisons": [ // the actual side-by-side numbers { "field": "price", "values": { "TRADINGVIEW": 331.9, "FINVIZ": 332.33, "YAHOO": 331.9, "SA": 331.9, "BLOOMBERG": 332.1 }, "match": true, "diff_pct": 0.1294, "tolerance_pct": 0.5, "pairs": [ { "between": ["TRADINGVIEW", "FINVIZ"], "match": true, "diff_pct": 0.1294 }, ... ], "chosen": "FINVIZ" } ], "resolutions": { "TRADINGVIEW": { "symbol": "NASDAQ:AAPL", ... }, ... }, "sources": { "TRADINGVIEW": "scanner.tradingview.com", "FINVIZ": "...", "YAHOO": "...", "SA": "...", "BLOOMBERG": "..." }, "errors": [ { "provider": "FINVIZ", "code": "...", "message": "..." } ], "warnings": [ "..." ], "degraded": false, // true when the health monitor saw drift/downtime "generated_at": "2026-11-04T10:43:02+00:00" }

One price, and it is the newest print. Every provider that can supply a field is asked. data holds exactly one value per compared field: the reading whose market print is newest. Providers that share the newest instant are the only tie-break candidates, and the documented default order (FINVIZ, TRADINGVIEW, YAHOO, SA, BLOOMBERG) picks between them; Bloomberg is last precisely because its print can be structurally older, and StockAnalysis sits just before it because its coverage is the narrowest of the live feeds. freshness.decision is the machine-readable outcome (newest, tie, no_timestamp), so a caller never has to parse the sentence in reason. Every original reading stays in comparisons.values.

Disagreements are never silently resolved. If the providers report different prices, all values stay in comparisons, the field is named in notice and warnings, and data_provider stays ALL (every asked provider *did* answer; they just disagree). The single value in data is the newest print, and the notice says so.

A field measured against a session baseline is not compared across observations. A day-change percentage or a session volume is derived from the previous close of the session the print belongs to. Finviz in a pre-market session and Yahoo at the prior close will legitimately differ, so such a pair is reported as not_comparable (with the reason in pairs[].not_comparable) instead of being called a provider conflict. Four guards decide that: a 900 s print-time ceiling, equality of the US/Eastern session date even when the prints are seconds apart, a declared feed delay as a boundary of its own (Bloomberg states 15 minutes on equities, so its pairs stop being comparable at that distance), and, for the fields re-derived from the print, an 8 h age ceiling against the clock so a feed that froze with its peers cannot pass. Both readings still appear; the field is listed in warnings as not cross-checked.

Some fields have no shared definition at all. Spot FX has no single official previous close, so each provider derives its own daily roll and the day-change figures answer different questions. On FX, change_percent is therefore always reported from every provider but never compared, with that reason in the pair. Instrument-level, not provider-level: no tolerance can make it a conflict.

A price is a print, and it carries its session. The obvious price field goes stale as soon as the regular session ends: TradingView's scanner close stops moving while its premarket_close keeps streaming, Yahoo's regularMarketPrice freezes while fulldayPrice does not, and StockAnalysis keeps the current extended print in extended_hours. Each provider's live print is therefore resolved before anything is compared, and stock_quote / stock_prices publish the session it belongs to (pre_market, regular, post_market, overnight) with the day change and previous close measured against that same session's baseline, recovered from the print's own change. The label follows the print that was served rather than a nominated leg, so a delayed feed cannot name a session the served number does not belong to. stock_extended_hours independently reads Blue Ocean overnight prints from TradingView's BOATS: socket and Yahoo's quote header. overnight_source names the newest eligible print, while overnight_readings, overnight_comparison and overnight_errors retain provenance and failures. On the same overnight occurrence, the normalized change uses Yahoo's reference_close; TradingView's venue-based change is retained separately as reported_change and reported_change_percent. An absent or cross-occurrence reference leaves the normalized change null. Last night's print survives after 04:00 ET with is_current: false, rather than being passed off as the live pre-market price. stock_quote does not carry overnight itself; use stock_extended_hours.

Extended-hour freshness is pairwise: Yahoo's candle time is parseable UTC ISO, StockAnalysis supplies price_timestamp, and TradingView's regular update_time is never attached to its separate extended print. An undated print therefore leaves only its own pairs not_comparable; a dated Yahoo/StockAnalysis pair can still agree. after_hours_readings retains each provider's price, session, timestamp, baseline and derived change, so the number's definition is visible beside it.

Implementation: reconcile.py (fan-out + comparison), freshness.py (print-time parsing), sessions.py (which session a print belongs to, and which print is live), providers_state.py (envelope + labels).


Symbols are resolved per provider

The same instrument is spelled differently by each upstream, and the differences are not mechanical:

| Instrument | TradingView | Finviz | Yahoo Finance | StockAnalysis | Bloo

冒頭だけを表示しています。続きはリポジトリで読めます