プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Opentrons OT-2 / Flex

作者:K-Dense-AIバージョン 0.1.3i★ 32 (リポジトリ全体のスター)iパソコンで動くリポジトリ ↗
レジストリ名io.github.K-Dense-AI/labmcp-opentrons

インストール方法

What it does

MCP server for Opentrons OT-2 and Flex liquid-handling robots (HTTP API).

  • Connects パソコンで動く
  • Account or key No key needed
  • Category その他

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気0/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ7/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア7/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

ひとことで AI にインストールしてもらう

Opentrons OT-2 / Flex をインストールして。https://mcp.popnx.com/i/k-dense-ai-labmcp-opentrons.md に従い、コマンドを見せて、私が OK するまで実行しないで。

パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る

チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

AI にインストールしてもらう

このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude に MCP server Opentrons OT-2 / Flex を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Opentrons OT-2 / Flex のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. パソコン版 Claude アプリの設定ファイルを開く

    SettingsDeveloperEdit Config

  3. この設定を貼り付けて保存

    {
      "mcpServers": {
        "labmcp-opentrons": {
          "command": "uvx",
          "args": [
            "labmcp-opentrons"
          ]
        }
      }
    }
  4. Claude を終了してもう一度開く

  5. 試してみる

    Opentrons OT-2 / Flex を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Opentrons OT-2 / Flex を使っていると言うか、回答に Opentrons OT-2 / Flex のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Opentrons OT-2 / Flex につなげません

Opentrons OT-2 / Flex はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Opentrons OT-2 / Flex につなげるアプリを使う

  • 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)

B · その他 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude Code に MCP server Opentrons OT-2 / Flex を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Opentrons OT-2 / Flex のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  3. このコマンドを貼り付けて Enter

    claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons
  4. Claude Code で /mcp と入力

    Opentrons OT-2 / Flex が一覧にあり、接続済みと表示されれば OK です

  5. 試してみる

    Opentrons OT-2 / Flex を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Opentrons OT-2 / Flex を使っていると言うか、回答に Opentrons OT-2 / Flex のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Cursor に MCP server Opentrons OT-2 / Flex を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Opentrons OT-2 / Flex のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで Cursor を開く

    Cursor で開く

    Cursor がインストールの確認をするので Install を押します

  3. Cursor の AI チャットを Agent モードで開く

  4. 試してみる

    Opentrons OT-2 / Flex を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Opentrons OT-2 / Flex を使っていると言うか、回答に Opentrons OT-2 / Flex のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの VS Code に MCP server Opentrons OT-2 / Flex を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "labmcp-opentrons": { "type": "stdio", "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Opentrons OT-2 / Flex のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで VS Code を開く

    VS Code で開く

    VS Code がインストールの確認をするので Install を押します

  3. VS Code の AI チャットを Agent モードで開く

  4. 試してみる

    Opentrons OT-2 / Flex を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Opentrons OT-2 / Flex を使っていると言うか、回答に Opentrons OT-2 / Flex のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Opentrons OT-2 / Flex を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-opentrons": {
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-opentrons": {
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-opentrons": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

自分で入力する値

  • LABMCP_ADDRESS env
    計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

GitHubスターi
32 (リポジトリ全体のスター)
このリポジトリには複数の MCP があり、スターは順位で1件だけ数えます
週あたりのダウンロードi
43/週
接続方法
パソコンで動く
最新バージョンi
0.1.3
カテゴリi
その他
レジストリ公開日i
2026年9月27日
コードの最終更新i
2026年9月27日
作者
K-Dense-AI
パッケージ
pypi: labmcp-opentrons
ウェブサイト
github.com
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント K-Dense-AI で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:2 か月前

  • ✓ 合格

    ライセンスがある

    Apache-2.0を使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

OSV.dev に labmcp-opentrons@0.1.3 の登録はありません

このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月16日

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-opentrons.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-opentrons)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

その他のほかのサーバーとの比較i

  • このカテゴリのほかの20653件のうち0%よりスターが多い
  • このカテゴリのほかの20653件のうち45%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの20653件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Opentrons OT-2 / Flexは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は2 か月前、最新バージョン(0.1.3)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73広く使われている★ 9.1万3 日前更新

クラウドで動く✓ 提供元 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ広く使われている★ 92742 か月前更新

クラウドで動く✓ 提供元 · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

作者:JanDeDobbeleer広く使われている★ 2.4万 リポジトリ全体のスター30 日前更新

クラウドで動く✓ 提供元 · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI成長中★ 582514 か月前更新

クラウドで動くリポジトリはアーカイブ済み✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom広く使われている★ 51364 か月前更新

クラウドで動く✓ 提供元 · jitsu.com
似たものと比べる
これ
Opentrons OT-2 / Flex
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
動く場所パソコンにインストールが必要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要
キーが必要いいえいいえいいえいいえいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/34/44/44/41/44/4
ライセンスApache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Opentrons OT-2 / Flex — MCP Server

Let an AI agent upload and check protocols, review the deck layout with you, start, pause, stop and resume runs, follow their progress, and read pipettes and modules on Opentrons Flex and OT-2 liquid-handling robots through the robot's documented HTTP API.

Packagelabmcp-opentrons
InstrumentsOpentrons Flex, Opentrons OT-2 (robot software 5.1 or newer)
InterfacesEthernet, Wi-Fi, USB (network over USB)
ProtocolOpentrons robot-server HTTP API on port 31950, Opentrons-Version: 3 (HTTP API guide, robot-server source; every robot also serves its spec at http:// :31950/openapi.json and /redoc)
Status🧪 simulated: tested against an in-memory robot-server simulator, not yet verified on hardware. Report a hardware test

Why this server rather than a generic HTTP wrapper: it refuses to start a run unless the robot's own protocol analysis passed, the user has confirmed the deck, the door is closed, the E-stop is released and module setpoints are within your limits. It exposes no single-move pipetting commands, keeps pause and stop available even in read-only mode, and records every HTTP request in the command log.

Try it without hardware

uvx labmcp-opentrons --simulate --check

uvx labmcp-opentrons --simulate --option sim_model=ot2 --check # simulate an OT-2

The simulator runs protocols in memory: Python protocols are compiled and scanned for labware, pipettes, modules and steps, runs go through the real status lifecycle, and module temperatures respond to the protocol.

Connect your robot

  1. Find the IP address: Opentrons App > Devices > your robot > Robot settings > Networking (or on the Flex touchscreen: Settings > Network). The robot must be on the same network as the computer running the MCP server. USB-connected robots also get an IP address (OT-2: 169.254.x.x).
  2. Test the connection:
   uvx labmcp-opentrons --address 192.168.1.20 --check

uvx labmcp-opentrons --address http://ot2-lab.local:31950 --check

   `--check` prints the robot's name, model, software and firmware versions.
  1. Access control (Flex only, rarely needed): if your Flex has access control enabled and requests fail with HTTP 401, pass a token with --option access_token= .

Add to your MCP client

Claude Code

claude mcp add opentrons -- uvx labmcp-opentrons --address 192.168.1.20

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "opentrons": { "command": "uvx", "args": ["labmcp-opentrons", "--address", "192.168.1.20"] } } }

Add --read-only to let the agent monitor the robot (status, runs, protocols, modules) while blocking uploads, runs, homing and lights. pause_run, stop_run and deactivate_modules stay available. For other clients, generate the snippet with uvx labmcp config opentrons --address 192.168.1.20 --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
deactivate_modules🛑 safetySwitch attached modules off: stop heating/cooling (Temperature Module, Thermocycler block and lid, Heater-Shaker heater), stop shaking, and lower Magnetic Module magnets. Only possible when no run is in progress: stop the run first.
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_protocol👁 readShow a stored protocol's analysis: whether it is ready to run, analysis errors, the deck layout it expects (labware and modules per slot, pipettes per mount, liquids), the number of steps and the highest module temperature / shake speed it requests. Review this with the user before start_run.
get_robot_status👁 readReport the robot's name, model (Flex/OT-2), software and firmware versions, lights, door and E-stop state, and the current run. Call this first to check the robot is ready.
get_run_status👁 readReport a run's status, the step it is on, progress, recent steps and any errors, plus advice on what to do next (e.g. when the run is waiting for error recovery).
home_robot⚠️ hazardHome all axes of the robot (the gantry and pipettes move to their home positions). Refused while a run is active. Make sure nothing is in the robot's path and the door is closed.
list_instruments👁 readList attached pipettes (and the Flex gripper): mount, name, channels, volume range, and whether a tip is detected and calibration data exists.
list_modules👁 readList attached modules (Temperature Module, Heater-Shaker, Thermocycler, Magnetic Module, Absorbance Plate Reader, ...) with live temperatures, targets, shake speed and status.
list_protocols👁 readList protocols stored on the robot (newest last) with their analysis status and result.
list_runs👁 readList recent protocol runs, newest first, with their status.
pause_run🛑 safetyPause a running protocol. The robot finishes its current step and then holds; resume_run continues it.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
resume_run⚠️ hazardResume a paused run (the robot starts moving again), or leave error recovery. Refused while the door is open. For a run awaiting recovery, error_recovery must be given.
set_lights🎛 controlTurn the robot's deck (rail) lights on or off.
start_run⚠️ hazardCreate a run of an analyzed protocol and start it: the robot begins moving and pipetting. Refused unless the protocol's analysis completed without errors, its module setpoints are within the safety limits, no other run is active, the door is closed and the E-stop is released.
stop_run🛑 safetyStop (cancel) a run immediately. A stopped run cannot be resumed; the robot homes and drops any attached tips into the trash. Use this whenever something looks wrong.
upload_protocol🎛 controlUpload a protocol file (plus optional custom labware) to the robot. The robot analyzes it (simulates it) and this tool returns the analysis: errors, deck layout and whether it is ready to run. Uploading does not move the robot. Uploading identical files returns the existing protocol.

get_connection_info, get_command_log and reconnect are built into every LabMCP server. get_command_log shows every HTTP request sent to the robot and its reply.

Safety limits

LimitDefaultMeaning
max_module_temperature_c110 °CHighest temperature (Temperature Module, Thermocycler block or lid, Heater-Shaker) a protocol may request; start_run refuses protocols above it
max_shake_speed_rpm3000 rpmFastest Heater-Shaker speed a protocol may request

The defaults are the hardware maxima. Tighten them for heat-sensitive plastics or samples: --limit max_module_temperature_c=70 --limit max_shake_speed_rpm=1500. The check reads the setpoints from the robot's analysis of the protocol (every celsius and rpm value in module commands, including thermocycler profiles).

Other safety interlocks built into start_run:

  • the robot's analysis must have completed with result ok (pending, failed or parameter-required analyses are refused, and the errors are shown);
  • deck_confirmed=true is required, which the agent should only pass after you confirmed the deck matches the layout from get_protocol;
  • no other run may be active, the Flex door must be closed and the E-stop released.

Example prompts

  • "Upload ~/protocols/serial_dilution.py to the Flex and tell me whether the analysis passed. What labware do I need where?"
  • "The deck is set up as you listed. Start the serial dilution run and tell me when it's halfway."
  • "What is the robot doing right now? How many steps are left?"
  • "Pause the run — I need to top up the reservoir." … "OK, resume."
  • "The run says a tip is missing. I've refilled the tip rack in slot C2; continue the run."
  • "The PCR finished. Turn off the thermocycler and the heater-shaker, then switch the lights off."

Notes

  • Protocols, not single moves. This server runs complete protocols that the robot has analyzed. It deliberately has no tools for individual pipetting or gantry moves (POST /runs/{id}/commands), because without full deck state these can crash pipettes into labware. That may come later behind stricter checks.
  • Labware Position Check offsets are not applied. Runs created through the HTTP API do not include the offsets the Opentrons App applies from Labware Position Check. If your setup depends on them, start the run from the App, or set offsets in the protocol (labware.set_offset(...)).
  • Run-time parameters use their default values. Protocols that need a value this server cannot give (e.g. a CSV file parameter) are reported as not ready.
  • Stopping a run is final: the robot homes and drops tips in the trash. Pausing waits for the current step to finish.
  • Error recovery (recent robot software, mainly Flex): when a step fails (e.g. no tip detected), the run waits in awaiting-recovery. resume_run(error_recovery="continue") continues from the robot's actual state and skips the failed step; "assume_false_positive" treats the failure as a false alarm. Only use either after someone has checked the robot.
  • Modules stay on after a protocol ends unless the protocol switches them off. deactivate_modules sends the robot's stateless deactivate commands (POST /commands), which the robot only accepts when no run is in progress.
  • list_instruments uses GET /instruments, which the robot fully supports on Flex; on an OT-2 it returns pipettes with less detail (no calibration data).
  • The HTTP API version is pinned with the Opentrons-Version: 3 header, as in Opentrons' integration examples. Override with --option api_version=4 if needed.

Hardware verification

ModelRobot softwareInterfaceVerified byDate
*none yet: be the first*