World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for SRS RGA100/200/300 residual gas analyzers.
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 0/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 7/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 7/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
SRS Residual Gas Analyzer をインストールして。https://mcp.popnx.com/i/k-dense-ai-labmcp-srs-rga.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server SRS Residual Gas Analyzer を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、SRS Residual Gas Analyzer のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}SRS Residual Gas Analyzer を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が SRS Residual Gas Analyzer を使っていると言うか、回答に SRS Residual Gas Analyzer のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025) LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。 LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。 LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ SRS Residual Gas Analyzer につなげません
SRS Residual Gas Analyzer はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
A · SRS Residual Gas Analyzer につなげるアプリを使う
B · その他 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server SRS Residual Gas Analyzer を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、SRS Residual Gas Analyzer のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rgaSRS Residual Gas Analyzer が一覧にあり、接続済みと表示されれば OK です
SRS Residual Gas Analyzer を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が SRS Residual Gas Analyzer を使っていると言うか、回答に SRS Residual Gas Analyzer のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025) LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。 LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。 LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server SRS Residual Gas Analyzer を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、SRS Residual Gas Analyzer のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
SRS Residual Gas Analyzer を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が SRS Residual Gas Analyzer を使っていると言うか、回答に SRS Residual Gas Analyzer のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025) LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。 LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。 LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server SRS Residual Gas Analyzer を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "labmcp-srs-rga": { "type": "stdio", "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、SRS Residual Gas Analyzer のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
SRS Residual Gas Analyzer を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が SRS Residual Gas Analyzer を使っていると言うか、回答に SRS Residual Gas Analyzer のツール名が出れば接続成功です
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025) LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。 LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。 LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80 説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください
JSON 設定は下の「開発者向け」にあります
Claude Code
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rgaClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-srs-rga": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
pypi: labmcp-srs-rgaこのサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント K-Dense-AI で確認済みです
コードの最終更新:2 か月前
Apache-2.0を使用
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
OSV.dev に labmcp-srs-rga@0.1.1 の登録はありません
このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月16日
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-srs-rga)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は2 か月前、最新バージョン(0.1.1)がレジストリに届いたのは2 か月前です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。
同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| これ SRS Residual Gas Analyzer | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| ライセンス | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
Let an AI agent read the residual gas composition of a vacuum system with a Stanford Research Systems RGA100, RGA200 or RGA300 quadrupole mass spectrometer: partial pressures at chosen m/z, analog and histogram spectra, total pressure, helium leak checks and a first-pass identification of the gases (water, hydrogen, nitrogen/CO, oxygen, argon, CO2, hydrocarbons). The filament, the electron multiplier (CDEM) and the ionizer degas are protected by server-side pressure interlocks.
| Package | labmcp-srs-rga |
| Instruments | SRS RGA100 (1-100 amu), RGA200 (1-200 amu), RGA300 (1-300 amu), with or without the CDEM option (01) |
| Interfaces | RS-232 (fixed 28,800 baud, 8N1, RTS/CTS), TCP via a serial-to-Ethernet adapter or the SRS RGA Ethernet adapter |
| Protocol | SRS RGA command set: Operating Manual and Programming Reference, Models RGA100/200/300, Rev. 1.9, chapter 6 "Programming the RGA Head" |
| Status | 🧪 simulated: tested against a wire-level simulator, not yet verified on hardware. Report a hardware test |
uvx labmcp-srs-rga --simulate --check
uvx labmcp-srs-rga --simulate --option scenario=helium_leak # He pulses every 20 s for leak_check uvx labmcp-srs-rga --simulate --option scenario=overpressure # a growing leak trips the filament
The simulator is an RGA200 with a CDEM on an unbaked chamber at ~1e-7 Torr (mostly water, then H2, N2/CO, CO2).
uvx labmcp ports uvx labmcp-srs-rga --address /dev/ttyUSB0 --check # Linux
uvx labmcp-srs-rga --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-srs-rga --address COM3 --check # Windows uvx labmcp-srs-rga --address tcp://192.168.1.50:4001 --check # raw-TCP serial-to-Ethernet adapter uvx labmcp-srs-rga --address tcp://192.168.1.50:818 --option user=admin --option password=admin --check # SRS RGA Ethernet adapter
On connection the server sends `ID?` and `IN0` (clear the RGA's buffers and run its hardware self-check). It does not switch anything on.
Claude Code
claude mcp add rga -- uvx labmcp-srs-rga --address /dev/ttyUSB0
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, ...)
{
"mcpServers": { "rga": { "command": "uvx", "args": ["labmcp-srs-rga", "--address", "/dev/ttyUSB0"] } } }
Add --read-only to allow measurements but block switching the filament/CDEM, degassing, calibration and settings changes (the off switches stay available). For other clients, generate the snippet with uvx labmcp config srs-rga --address /dev/ttyUSB0 --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
all_off | 🛑 safety | Put the RGA in a safe state: abort any degas, CDEM off (HV0), filament off (FL0) and quadrupole RF/DC off (MR0). Use when finished, before venting, or if anything looks wrong. It interrupts a running scan or leak check, and every step is attempted even if an earlier one fails. |
analog_scan | 👁 read | Record an analog mass spectrum (SC1): the quadrupole steps through the mass range and the full peak shapes are returned (downsampled) with a peak list, the total pressure measured at the end of the scan, and optionally the full data as CSV. Use it to check peak positions and to survey unknown gases. Duration depends on the noise floor (e.g. 126 ms/amu at NF4). An existing save_path file is never overwritten. |
calibrate | ⚠️ hazard | Calibrate the detector: zero (CA) re-zeroes the ion detector at the present noise floor and detector and corrects the RF scan table for temperature drift (seconds); electrometer (CL) recalibrates the electrometer's full I-V response (longer, clears all zero offsets). The quadrupole RF is switched off at the end. |
cdem_off | 🛑 safety | Switch the electron multiplier off (HV0) and return to Faraday-cup detection. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
degas | ⚠️ hazard | Start an ionizer degas (DG): 20 mA of 400 eV electrons clean the ion source by electron stimulated desorption. The CDEM is switched off and left off. Degassing shortens filament life; prefer a bakeout. Refused above max_filament_pressure_torr and beyond max_degas_minutes. Returns immediately; the RGA is busy until it finishes (any command would abort it), and filament_off / all_off stop it. |
filament_off | 🛑 safety | Switch the filament off (FL0), stopping a degas first if one is running. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_status | 👁 read | Report the RGA state: filament emission, CDEM on/off and voltage, ionizer settings, scan settings, stored sensitivity factors, and the decoded error bytes (e.g. FL6 when the overpressure protection shut the filament down). Reading the error bytes clears the communication (EC?) and CDEM (EM?) error bytes, as on the instrument. |
histogram_scan | 👁 read | Record a bar-graph spectrum (HS1): one peak-locked value per integer m/z plus the total pressure. Faster than an analog scan and the usual way to follow a residual gas composition. |
identify_residual_gases | 👁 read | Run a histogram scan and assign the major peaks to likely gases with a simple lookup of standard 70 eV fragment patterns: H2 (2), He (4), CH4 (16/15), H2O (18/17), N2 or CO (28, split with 14 and 12), O2 (32), Ar (40), CO2 (44), plus diagnoses such as an air leak or hydrocarbon contamination. A screening aid, not a quantitative analysis. |
leak_check | 👁 read | Helium leak check: monitor m/z 4 while someone sprays helium on suspect joints, and report the baseline, every response above threshold_factor x baseline (start/end time, peak) and the time series. Keep the first few seconds free of helium so the baseline is clean. The response time of a real leak is a few seconds. Bounded by max_leak_check_duration_s. |
measure_masses | 👁 read | Measure partial pressures at a list of m/z values (peak-locked single-mass measurements, MR). Fast and precise for monitoring known gases; the precision and time per mass are set by the noise floor (set_scan_parameters). Pressures are N2-equivalent. |
read_total_pressure | 👁 read | Measure the total pressure with the RGA acting as an ionisation gauge (TP?, Faraday cup). Needs the filament on and the CDEM off. The value is N2-equivalent and can differ from a Bayard-Alpert gauge by a factor of a few, depending on the gas composition. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
set_cdem | ⚠️ hazard | Switch the electron multiplier (CDEM) on at a given high voltage for ~100-10000x more signal. High pressure shortens CDEM life and can destroy it, so this is refused unless the pressure is below max_cdem_pressure_torr (RGA total pressure measured now with the Faraday cup, a recent one, or external_pressure_torr), and the voltage is capped by max_cdem_voltage_v. Total-pressure readings are disabled while the CDEM is on. |
set_filament | ⚠️ hazard | Switch the filament on (or change its emission current). The filament burns out or is damaged above 1e-4 Torr, so this is refused unless the pressure is below max_filament_pressure_torr: pass external_pressure_torr from a separate gauge, or, if the filament is already on, the RGA's own total pressure is measured. The RGA's protection will also shut the filament down on overpressure (reported as FL6). |
set_scan_parameters | 🎛 control | Change measurement settings: noise floor (speed vs detection limit), electron energy, ion energy, focus plate voltage and analog-scan resolution. Sensitivity factors stored in the head are only valid at the default ionizer settings (70 eV, 12 eV, 90 V). After changing the noise floor the detector zero is re-adjusted automatically at the start of the next scan. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
The RGA filament must only run below 1e-4 Torr, and a CDEM should never see voltage above 1e-4 Torr, with 5e-6 Torr or less recommended (manual: FL command warning p. 6-35, "CDEM Handling and Care" in the Maintenance chapter). The RGA only measures pressure while its filament emits, so switching on needs evidence:
set_filament and degas: the pressure must be at or below max_filament_pressure_torr. set_cdem: at or below max_cdem_pressure_torr, and the voltage at or below max_cdem_voltage_v (the hardware range of 10-2490 V is enforced as well).external_pressure_torr (a reading from another gauge that the user confirmed) and, when the filament is on and the CDEM off, a total-pressure measurement taken right then. If both are available, the higher one is checked, so a mistyped gauge value can't override what the RGA measures. With the CDEM on (the RGA can't measure), a reading from the last max_pressure_reading_age_s is accepted, but only while the filament is still on: once it is off (switched off or tripped) an older reading says nothing about the present pressure.get_status reports it.all_off, filament_off and cdem_off interrupt a running scan, mass measurement or leak check (which then returns an error and no data) instead of waiting for it to finish. all_off attempts every step even if one fails, and reports what failed.| Limit | Default | Meaning |
|---|---|---|
max_filament_pressure_torr | 1e-4 Torr | Highest pressure at which the filament may be switched on or the ionizer degassed |
max_cdem_pressure_torr | 5e-6 Torr | Highest pressure at which the CDEM may be switched on |
max_cdem_voltage_v | 2000 V | Highest CDEM high voltage (hardware maximum 2490 V) |
max_pressure_reading_age_s | 60 s | Oldest RGA total-pressure reading accepted as evidence (only while the filament stays on) |
max_degas_minutes | 3 min | Longest ionizer degas (hardware maximum 20 min) |
max_scan_duration_s | 900 s | Longest estimated analog/histogram scan |
max_leak_check_duration_s | 1800 s | Longest helium leak-check run |
Override at launch, e.g. --limit max_cdem_voltage_v=2400 --limit max_filament_pressure_torr=1e-5.