プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Active Directory / LDAP

作者:matteoredaelliバージョン 0.8.4i★ 1 (リポジトリ全体のスター)iパソコンで動くリポジトリ ↗
レジストリ名io.github.matteoredaelli/active-directory-ldap-mcp

インストール方法

What it does

Active Directory / LDAP MCP server: find users, groups, memberships; read-only security audits.

  • Connects パソコンで動く
  • Account or key Needs MSAD_PASSWORD
  • Category サイバーセキュリティ

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気0/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ12/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア12/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

ひとことで AI にインストールしてもらう

Active Directory / LDAP をインストールして。https://mcp.popnx.com/i/matteoredaelli-active-directory-ldap-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。

パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る

チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月18日

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

AI にインストールしてもらう

このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude に MCP server Active Directory / LDAP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "active-directory-ldap": { "command": "uvx", "args": [ "mcpad" ], "env": { "MSAD_PASSWORD": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) MSAD_PASSWORD は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Active Directory / LDAP のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. Active Directory / LDAP に登録してキーを作る

    提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。

    キーの取り方は下の提供元 README にあります

  3. パソコン版 Claude アプリの設定ファイルを開く

    SettingsDeveloperEdit Config

  4. この設定を貼り付けて保存

    {
      "mcpServers": {
        "active-directory-ldap": {
          "command": "uvx",
          "args": [
            "mcpad"
          ],
          "env": {
            "MSAD_PASSWORD": "your-value"
          }
        }
      }
    }

    キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください

  5. Claude を終了してもう一度開く

  6. 試してみる

    Active Directory / LDAP を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Active Directory / LDAP を使っていると言うか、回答に Active Directory / LDAP のツール名が出れば接続成功です

追加の設定 5 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • MSAD_DOMAIN ツール呼び出しで省略された場合に使用する既定の AD ドメイン(/.msad.toml のセクション)
    英語の原文を見るDefault AD domain (section of ~/.msad.toml) when a tool call omits it
  • MSAD_HOST ドメインコントローラーのホスト(/.msad.toml の代替)
    英語の原文を見るDomain controller host (alternative to ~/.msad.toml)
  • MSAD_BASE LDAP のベース DN(例: dc=example,dc=com)
    英語の原文を見るLDAP base DN, e.g. dc=example,dc=com
  • MSAD_USER バインドユーザー(ユーザー/パスワード認証)
    英語の原文を見るBind user (user/password auth)
  • MCPAD_ALLOW_WRITE 真の値を設定するとグループメンバーシップの書き込みツールを有効にします(デフォルト:読み取り専用)
    英語の原文を見るSet truthy to enable group-membership write tools (default: read-only)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Active Directory / LDAP につなげません

Active Directory / LDAP はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Active Directory / LDAP につなげるアプリを使う

  • Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)

B · サイバーセキュリティ の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude Code に MCP server Active Directory / LDAP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user active-directory-ldap --env MSAD_PASSWORD=your-value -- uvx mcpad 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) MSAD_PASSWORD は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Active Directory / LDAP のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. Active Directory / LDAP に登録してキーを作る

    提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。

    キーの取り方は下の提供元 README にあります

  3. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  4. このコマンドを貼り付けて Enter

    claude mcp add --scope user active-directory-ldap --env MSAD_PASSWORD=your-value -- uvx mcpad

    Enter の前に「your-value」を自分のキーに書き換えてください

    キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください

  5. Claude Code で /mcp と入力

    Active Directory / LDAP が一覧にあり、接続済みと表示されれば OK です

  6. 試してみる

    Active Directory / LDAP を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Active Directory / LDAP を使っていると言うか、回答に Active Directory / LDAP のツール名が出れば接続成功です

追加の設定 5 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • MSAD_DOMAIN ツール呼び出しで省略された場合に使用する既定の AD ドメイン(/.msad.toml のセクション)
    英語の原文を見るDefault AD domain (section of ~/.msad.toml) when a tool call omits it
  • MSAD_HOST ドメインコントローラーのホスト(/.msad.toml の代替)
    英語の原文を見るDomain controller host (alternative to ~/.msad.toml)
  • MSAD_BASE LDAP のベース DN(例: dc=example,dc=com)
    英語の原文を見るLDAP base DN, e.g. dc=example,dc=com
  • MSAD_USER バインドユーザー(ユーザー/パスワード認証)
    英語の原文を見るBind user (user/password auth)
  • MCPAD_ALLOW_WRITE 真の値を設定するとグループメンバーシップの書き込みツールを有効にします(デフォルト:読み取り専用)
    英語の原文を見るSet truthy to enable group-membership write tools (default: read-only)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Cursor に MCP server Active Directory / LDAP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "active-directory-ldap": { "command": "uvx", "args": [ "mcpad" ], "env": { "MSAD_PASSWORD": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) MSAD_PASSWORD は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Active Directory / LDAP のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. Active Directory / LDAP に登録してキーを作る

    提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。

    キーの取り方は下の提供元 README にあります

  3. このボタンで Cursor を開く

    Cursor で開く

    Cursor がインストールの確認をするので Install を押します

  4. キーを入力

    Active Directory / LDAP の設定で MSAD_PASSWORD が空です。自分のキーを入れて保存します

    キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください

  5. Cursor の AI チャットを Agent モードで開く

  6. 試してみる

    Active Directory / LDAP を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Active Directory / LDAP を使っていると言うか、回答に Active Directory / LDAP のツール名が出れば接続成功です

追加の設定 5 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • MSAD_DOMAIN ツール呼び出しで省略された場合に使用する既定の AD ドメイン(/.msad.toml のセクション)
    英語の原文を見るDefault AD domain (section of ~/.msad.toml) when a tool call omits it
  • MSAD_HOST ドメインコントローラーのホスト(/.msad.toml の代替)
    英語の原文を見るDomain controller host (alternative to ~/.msad.toml)
  • MSAD_BASE LDAP のベース DN(例: dc=example,dc=com)
    英語の原文を見るLDAP base DN, e.g. dc=example,dc=com
  • MSAD_USER バインドユーザー(ユーザー/パスワード認証)
    英語の原文を見るBind user (user/password auth)
  • MCPAD_ALLOW_WRITE 真の値を設定するとグループメンバーシップの書き込みツールを有効にします(デフォルト:読み取り専用)
    英語の原文を見るSet truthy to enable group-membership write tools (default: read-only)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

Active Directory / LDAP のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの VS Code に MCP server Active Directory / LDAP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "active-directory-ldap": { "type": "stdio", "command": "uvx", "args": [ "mcpad" ], "env": { "MSAD_PASSWORD": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) MSAD_PASSWORD は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Active Directory / LDAP のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. Active Directory / LDAP に登録してキーを作る

    提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。

    キーの取り方は下の提供元 README にあります

  3. このボタンで VS Code を開く

    VS Code で開く

    VS Code がインストールの確認をするので Install を押します

  4. キーを入力

    Active Directory / LDAP の設定で MSAD_PASSWORD が空です。自分のキーを入れて保存します

    キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください

  5. VS Code の AI チャットを Agent モードで開く

  6. 試してみる

    Active Directory / LDAP を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Active Directory / LDAP を使っていると言うか、回答に Active Directory / LDAP のツール名が出れば接続成功です

追加の設定 5 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • MSAD_DOMAIN ツール呼び出しで省略された場合に使用する既定の AD ドメイン(/.msad.toml のセクション)
    英語の原文を見るDefault AD domain (section of ~/.msad.toml) when a tool call omits it
  • MSAD_HOST ドメインコントローラーのホスト(/.msad.toml の代替)
    英語の原文を見るDomain controller host (alternative to ~/.msad.toml)
  • MSAD_BASE LDAP のベース DN(例: dc=example,dc=com)
    英語の原文を見るLDAP base DN, e.g. dc=example,dc=com
  • MSAD_USER バインドユーザー(ユーザー/パスワード認証)
    英語の原文を見るBind user (user/password auth)
  • MCPAD_ALLOW_WRITE 真の値を設定するとグループメンバーシップの書き込みツールを有効にします(デフォルト:読み取り専用)
    英語の原文を見るSet truthy to enable group-membership write tools (default: read-only)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Active Directory / LDAP を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

claude mcp add --scope user active-directory-ldap --env MSAD_PASSWORD=your-value -- uvx mcpad

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "active-directory-ldap": {
      "command": "uvx",
      "args": [
        "mcpad"
      ],
      "env": {
        "MSAD_PASSWORD": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "active-directory-ldap": {
      "command": "uvx",
      "args": [
        "mcpad"
      ],
      "env": {
        "MSAD_PASSWORD": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "active-directory-ldap": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcpad"
      ],
      "env": {
        "MSAD_PASSWORD": "your-value"
      }
    }
  }
}

自分で入力する値

  • MSAD_DOMAIN env
    ツール呼び出しで省略された場合に使用する既定の AD ドメイン(/.msad.toml のセクション)
    英語の原文を見るDefault AD domain (section of ~/.msad.toml) when a tool call omits it
  • MSAD_HOST env
    ドメインコントローラーのホスト(/.msad.toml の代替)
    英語の原文を見るDomain controller host (alternative to ~/.msad.toml)
  • MSAD_BASE env
    LDAP のベース DN(例: dc=example,dc=com)
    英語の原文を見るLDAP base DN, e.g. dc=example,dc=com
  • MSAD_USER env
    バインドユーザー(ユーザー/パスワード認証)
    英語の原文を見るBind user (user/password auth)
  • MSAD_PASSWORD 秘密 必須 env
    バインドパスワード(ユーザー/パスワード認証)
    英語の原文を見るBind password (user/password auth)
  • MCPAD_ALLOW_WRITE env
    真の値を設定するとグループメンバーシップの書き込みツールを有効にします(デフォルト:読み取り専用)
    英語の原文を見るSet truthy to enable group-membership write tools (default: read-only)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

GitHubスターi
1 (リポジトリ全体のスター)
このリポジトリには複数の MCP があり、スターは順位で1件だけ数えます
週あたりのダウンロードi
122/週
接続方法
パソコンで動く
最新バージョンi
0.8.4
レジストリ公開日i
2026年11月18日
コードの最終更新i
2026年11月18日
作者
matteoredaelli
パッケージ
pypi: mcpad
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント matteoredaelli で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:昨日

  • ✓ 合格

    ライセンスがある

    GPL-3.0を使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

OSV.dev に mcpad@0.8.4 の登録はありません

このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月18日

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/matteoredaelli-active-directory-ldap-mcp.svg)](https://mcp.popnx.com/en/servers/matteoredaelli-active-directory-ldap-mcp)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

サイバーセキュリティのほかのサーバーとの比較i

  • このカテゴリのほかの1106件のうち0%よりスターが多い
  • このカテゴリのほかの1106件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1106件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Active Directory / LDAPは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

入力が必要なもの:MSAD_PASSWORD

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は昨日、最新バージョン(0.8.4)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:GitHits, Dependency Management MCP Server, Snyk MCP, TokenSafe, Draugr

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

GitHits

Search public open-source code, documentation, metadata, vulnerabilities, changelogs, and examples.

作者:githits-com成長中↓ 3807/週★ 13810 日前更新

パソコンでもクラウドでも✓ 提供元 · githits.com

Snyk MCP

Easily find and fix security issues in your applications leveraging Snyk platform capabilities.

作者:snyk広く使われている↓ 76.2万/週★ 617 か月前更新

パソコンで動く✓ 提供元 · snyk.io

TokenSafe

Your AI agent is smart enough to code all day. Local firewall & zero-loss runtime.

作者:tokensafe-dev広く使われている↓ 6785/週★ 46今日更新

パソコンでもクラウドでも✓ 提供元 · tokensafe.dev
似たものと比べる
これ
Active Directory / LDAP
GitHitsDependency Management MCP ServerSnyk MCPTokenSafeDraugr
動く場所パソコンにインストールが必要クラウドでもパソコンにインストールでも使えるクラウドで動き、インストール不要パソコンにインストールが必要クラウドでもパソコンにインストールでも使えるパソコンにインストールが必要
キーが必要はいいいえいいえいいえいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/35/53/43/35/53/3
ライセンスGPL-3.0Apache-2.0–Apache-2.0MITApache-2.0
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

mcpAD

A FastMCP server that exposes the msad Active Directory / LDAP library as MCP tools.

Built with Python 3.14 and uv. It reuses the typed, public msad API (search users/groups, memberships, account status, read-only security audits). All tools are read-only by default; optional group-membership write tools are disabled unless MCPAD_ALLOW_WRITE is enabled (see Write tools).

Tools

ToolDescription
find_usersFind users by name/surname/mail/sam/department/city/state/country (ANDed, * wildcards)
get_userGet a single user (exact match)
find_groupsFind groups (* wildcards)
get_groupGet a single group (exact match)
find_computersFind computers by name/dns/os (* wildcards); optionally exclude_domain_controllers
get_computerGet a single computer (sAMAccountName/cn/dNSHostName)
find_contactsFind AD contact objects by cn/mail/displayName (* wildcards)
find_ousFind organizational units by name (* wildcards)
get_ouGet a single OU by its ou name or full DN (exact match)
get_ou_contentsList objects under an OU (optionally filtered by object_class)
find_empty_ousOrganizational units with no nested sub-OU (hygiene/audit)
find_inactive_usersFind users whose last logon is older than days (default 90)
find_stale_computersFind computers whose last logon is older than days (default 90)
disabled_usersList disabled user accounts (audit; counterpart of is_disabled)
locked_usersList locked-out user accounts (audit; counterpart of is_locked)
never_expires_passwordList users whose password never expires (audit)
never_expiring_accountsList users whose ACCOUNT (not password) never expires
expired_accountsList users whose accountExpires date is in the past
password_not_requiredRisk: users with the PASSWD_NOTREQD UAC flag (account may have no password)
kerberos_preauth_not_requiredRisk: users not requiring Kerberos pre-auth (AS-REP roasting exposure)
not_delegatedRisk: accounts flagged "sensitive and cannot be delegated"
find_service_accountsRisk: users with a Service Principal Name set (Kerberoasting exposure)
find_admin_count_accountsUsers with adminCount=1 (current or stale protected-admin marker)
find_must_change_passwordEnabled users who must change their password at next logon (pwdLastSet=0)
find_users_without_emailData-quality check: users with no mail attribute set
find_almost_locked_outEnabled users close to the lockout threshold (badPwdCount)
find_credentials_in_descriptionRisk: users whose description may contain a plaintext credential
find_shadow_credentialsRisk: users/computers with a msDS-KeyCredentialLink (Shadow Credentials)
find_obsolete_os_computersComputers running a commonly-cited end-of-life Windows version
audit_admin_accountsMembers of well-known privileged groups (admin-account audit)
list_fsmo_rolesOwners of the five FSMO roles (schema, domain-naming, PDC, RID, infrastructure)
list_trustsDomain trust relationships (trustedDomain objects)
list_sitesActive Directory sites (from the Configuration naming context)
list_domain_controllersDomain controllers (computer accounts flagged SERVER_TRUST_ACCOUNT)
summarize_computer_osCount of computer accounts grouped by operating system
list_empty_groupsGroups with no direct members (hygiene/audit)
find_security_groupsList security-enabled groups, optionally by scope (global/domain_local/universal)
find_distribution_groupsList distribution groups (complement of find_security_groups)
find_admin_count_groupsGroups with adminCount=1 (current or stale protected-group marker)
list_gposGroup Policy Objects (groupPolicyContainer)
get_gpoA single GPO by its cn (GUID) or displayName
list_fine_grained_password_policiesFine-grained password policies (PSOs)
find_recently_modifiedObjects whose whenChanged is within the last days days, optionally by object_class
find_recently_createdObjects whose whenCreated is within the last days days, optionally by object_class
get_domain_infoDomain object: security-relevant settings and metadata (audit)
get_password_policyDefault domain password policy (audit)
get_password_policy_violationsUsers whose password violates the policy (audit)
get_privileged_groupsWell-known privileged groups with member counts (audit)
get_by_dnFetch any entry directly by its DN (resolve manager / managedBy)
get_dnResolve a sAMAccountName (or DN) to a distinguished name
search_ldapRun a raw, read-only LDAP search with a custom filter (power-user escape hatch)
group_membersList group members (direct or nested)
user_groupsList a user's groups (nested by default)
is_memberIs a user a (nested) member of a group?
is_disabledIs an account disabled?
is_lockedIs an account locked?
test_connectionTest AD connectivity and bind (returns ok/target/auth/error)
whoamiIdentity bound as (RFC 4532 "Who Am I?"); works with Kerberos too
healthServer health check (server name, msad version, connectivity)

The find_users, find_groups, find_computers and find_ous tools accept an optional base (a DN, e.g. an OU) to restrict the search to that subtree instead of the whole domain.

Tool annotations

Every tool advertises standard MCP behavior hints so a client can reason about its risk without parsing the name or docstring. All the tools above are read-only (readOnlyHint: true); the optional write tools (see below) are marked destructiveHint: true (and readOnlyHint: false).

Returned attributes

By default get_user / find_users return a useful attribute set: identity fields plus manager — the distinguished name (DN) of the user's manager, e.g. CN=Anna Bianchi,OU=Staff,DC=group,DC=example,DC=com — as well as memberOf (direct group DNs), userAccountControl, accountExpires, lastLogonTimestamp and whenCreated. Group lookups include managedBy (the DN of the group's owner), member, groupType and whenCreated.

To expand a manager (or any DN-valued field) into a full record, call get_by_dn with that DN. This is a direct, efficient lookup (the DN is used as the search base), so an agent can do: get_user("mrossi") → read manager → get_by_dn(" ").

Decoded attributes

By default the server also adds decoded companion keys next to the raw attributes, so a client doesn't have to interpret AD's opaque numbers and binary blobs:

  • userAccountControl_decoded — a flag list plus booleans (disabled, locked, password_never_expires, ...);
  • groupType_decoded — scope (global / domain_local / universal) and security vs. distribution;
  • objectSid_decoded / objectGUID_decoded — canonical S-1-5-... / GUID strings;
  • _iso — an ISO-8601 timestamp for FILETIME attributes (accountExpires, lastLogonTimestamp, pwdLastSet, lockoutTime, ...), omitted for the "never"/unset sentinels.

The raw attributes are always preserved. Decoding is on by default; set MCPAD_DECODE_ATTRS to a falsy value (0, false, no, off) to return raw attributes only.

Write tools

The tools above are all read-only. Two optional write tools modify AD group membership and are therefore disabled by default. They are registered only when the MCPAD_ALLOW_WRITE environment variable is set to a truthy value (1, true, yes, on):

ToolDescription
add_group_memberAdd a user to a group (both as sAMAccountName or DN)
remove_group_memberRemove a user from a group (both as sAMAccountName or DN)
unlock_accountUnlock a locked-out user account (resets lockoutTime to 0)
MCPAD_ALLOW_WRITE=1 uv run mcpad      # write tools registered

uv run mcpad # read-only (default)

The service account used by msad must have the directory permissions to modify the target groups; otherwise the call fails with an MsadError. When writes are disabled the tools are not advertised at all, so an agent cannot invoke them.

Two-phase confirmation

All write tools are two-phase. The first call (confirm=false, the default) makes no change and returns a preview:

{ "status": "confirmation_required", "ok": false, "group": "Sales", "user": "jdoe",

"message": "Would add user 'jdoe' to group 'Sales'. Re-call with confirm=true ..." }

Call again with confirm=true — only after explicit human approval — to apply the change. An agent must never set confirm=true on its own.

Safety guard-rails

Even with writes enabled, membership changes that touch sensitive objects are refused (returned as status: "error"), regardless of confirm:

  • Protected accounts — administrator, admin, krbtgt, guest, system, plus any name matching a service/machine pattern (*$ machine accounts, svc_*, service_*, sa_*, adm_*, sys_*).
  • Protected groups — Domain Admins, Enterprise Admins, Schema Admins, Administrators, the operator groups, Group Policy Creator Owners, DnsAdmins, and Domain Users (critical system group).

Matching is case-insensitive and works whether you pass a sAMAccountName or a full DN. Extend or tune via environment variables:

VariableEffect
MCPAD_PROTECTED_ACCOUNTSComma-separated extra account names to protect
MCPAD_PROTECTED_GROUPSComma-separated extra group names to protect
MCPAD_DISABLE_GUARDRAILSSet truthy to turn the checks off (not recommended)

Audit logging

Set MCPAD_AUDIT_LOG to a file path to record every tool call (read-only and write alike) as one JSON object per line (JSON-lines). Logging is off by default.

MCPAD_AUDIT_LOG=/var/log/mcpad/audit.log uv run mcpad

Each entry carries the UTC timestamp, the tool name, the (redacted) arguments, the status, the business outcome, the duration, and — on failure — the error:

{"ts": "2026-10-18T20:09:34.029995+00:00", "tool": "add_group_member",

"params": {"group": "Sales", "user": "jdoe", "confirm": true}, "status": "ok", "outcome": "applied", "duration_ms": 12.4}

Notes:

  • Sensitive argument values (password, new_password, old_password, token, ...) are replaced with ***REDACTED***.
  • status records only whether the Python call returned (ok) or raised (error). The `outcome` field records what actually happened:
  • completed — a read-only tool returned normally (the common case);
  • preview — a two-phase write returned its confirmation preview and changed nothing (confirm=false);
  • blocked — a safety guard-rail refused the write;
  • applied — a write was confirmed and executed;
  • failed — the call raised (paired with status: "error").
  • The parent directory is created if needed; if the path cannot be opened the server logs a warning and continues without audit logging (tool calls are never blocked by an unwritable log).

Result limits

Every tool's limit argument is clamped to a hard ceiling so a single call can't pull an unbounded number of rows from a domain controller. The default ceiling is 1000; a limit above it — or limit=0, which the underlying msad library treats as "no limit" — is rewritten to the ceiling. A limit below the ceiling is used as-is.

MCPAD_MAX_LIMIT=500 uv run mcpad      # lower the ceiling to 500

MCPAD_MAX_LIMIT must be a

冒頭だけを表示しています。続きはリポジトリで読めます