プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Utuh watcher

作者:PugarHudaバージョン 0.4.0i★ –iパソコンで動く
レジストリ名io.github.PugarHuda/utuh-mcp

インストール

概要

作者による説明(英語の原文)

Sweep bonded completeness claims on Creditcoin against Ethereum, and refute one that omits an event.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: パソコンで動く
  • トランスポート: stdio
  • カテゴリ: 暗号資産・ブロックチェーン
  • 入力が必要なもの:PRIVATE_KEY

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

「秘密」と表示された値は、あなたのアカウントの鍵です。絶対に人に教えたり、チャットに貼り付けたりしないでください。

必要なもの

  • npmNode.jsのインストール(npxコマンドに必要)

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます

{
  "mcpServers": {
    "utuh": {
      "command": "npx",
      "args": [
        "-y",
        "utuh-mcp"
      ],
      "env": {
        "PRIVATE_KEY": "your-value"
      }
    }
  }
}

ターミナルでこれを実行します

claude mcp add utuh --env PRIVATE_KEY=your-value -- npx -y utuh-mcp

動かす前に、空欄の値を入力してください。

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "utuh": {
      "command": "npx",
      "args": [
        "-y",
        "utuh-mcp"
      ],
      "env": {
        "PRIVATE_KEY": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "utuh": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "utuh-mcp"
      ],
      "env": {
        "PRIVATE_KEY": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

自分で入力する値

  • PRIVATE_KEY 秘密 env
    A funded Creditcoin CC3 Testnet key, needed only by refute_claim — which also demands confirm: true. Every other tool reads the chain and spends nothing.

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント PugarHuda で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

暗号資産・ブロックチェーンのほかのサーバーとの比較i

  • このカテゴリのほかの1614件のうち0%よりスターが多い
  • このカテゴリのほかの1614件のうち46%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1614件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Utuh watcherは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

入力が必要なもの:PRIVATE_KEY

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.4.0)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.jsも必要です。

代わりに使えるものは?

同じカテゴリには:Highwire, DeFi Quant Yield & Risk Engine, gasrescue

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Highwire

作者:HigherMaestro

Trade, launch and research higher.fun coins on Solana, from any AI agent. Unsigned or policy-signed.

パソコンでもクラウドでも今日更新
インストール

gasrescue

作者:gasrescue

Rescue USDC, USDT and USDG from wallets with no gas: send or swap them on EVM, Solana and Tron.

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Utuh

Utuh bonds the claim that a set of events is complete, pays half the bond to anyone who proves one event was left out, and lends CTC undercollateralized against the claims that survive.

_utuh_ — Indonesian: whole, intact, with nothing missing. A completeness layer for the Attestcoin Protocol, built for BUIDL CTC 2026 Fall and deployed on Creditcoin CC3 Testnet.

The landing page, claim 5 as a working paperThe console, claim 20 opened verdict first
Dark schemeA sweep of claim 5 from the browser, with its provenance
  • Verify every number yourself: npm run judge — no key. It re-measures every number this repository and the submission quote against the live chain and exits non-zero on any that no longer holds. On 2026-09-14, after the production deploy, it printed 25 of 25, two of them checks that read the example gate below.
  • Hold the watcher role from an agent: npx -y utuh-mcp — 0.4.0 on npm and in the official MCP Registry. For clients that cannot run a command, the same server answers at https://utuh.vercel.app/api/mcp (below).
  • Measured: 211 Foundry tests with 16 invariants, 100% line and branch coverage and 99.1% of 737 mutants killed · Slither 0 findings · halmos 5 of 5 · every contract verified on Blockscout and matched on Sourcify · 248 TransactionVerified events on CC3's own indexer.
  • Demo video (3 min): https://youtu.be/HwSnv3E4tzo · Whitepaper: PDF, from web/whitepaper.html · Deck: web/deck.pdf

What is on-chain, all verified on Blockscout and Sourcify (every address and read):

On CC3 Testnet (chain 102031)AddressWhat it holds
UtuhRegistry, Ethereum-mainnet-sourced0x8FA0…5Fac72 claims over real Ethereum mainnet history; 32 refuted, claim 20 among them
UtuhRegistry, Sepolia-sourced0x2688…347b13 claims, the completed borrow-and-repay loop; claims 3 and 5 refuted
UtuhCredit, Sepolia-sourced0x0177…24b6lines 1–3 opened, drawn, repaid on Sepolia and settled; lines 2 and 3 entirely from the console
SettlementLedger, on Sepolia0xC8C9…575Bthe source-chain repayments those lines settled on
Creditcoin's own oracle recordtransaction-verifications248 TransactionVerified rows are Utuh's: 212 claim members, 34 refutations, the rest control bindings

A contract that is not Utuh reads it: NeverLiquidatedGate at 0xcA62…5D09 granted an allowance on claim 72 and refused refuted claim 20. This project wrote and deployed it as the worked example, so it is not an outside user.

Contents

The short version · The problem · What this uses of Creditcoin's · Next to Creditcoin's own example · What Utuh does · Built on Ethereum mainnet · UtuhCredit · Deployed on CC3 Testnet · Two demonstrations · The watcher as an MCP server · The console · Layout · Running it · On testing · What the tools say · Before you build on this · Attestcoin surface used · Known limits · License

Elsewhere: [docs/INTEGRATING.md](docs/INTEGRATING.md) (use the registry from your own contract) · [docs/COMPLETENESS.md](docs/COMPLETENESS.md) (does what you built have this gap?) · [docs/ROADMAP.md](docs/ROADMAP.md) (what is gated on whom) · docs/AUDIT.md · docs/MAINNET.md · SECURITY.md · 한국어 요약: [docs/README.ko.md](docs/README.ko.md)

The short version

Any registry on this protocol can tell you what it holds. Ask one whether a borrower has ever been liquidated and it can only answer with what someone chose to submit — and the borrower will not be submitting that. Utuh bonds the claim that a set is all of them, and pays half the bond to anyone who proves one event was left out.

The landing page reads both registries from Creditcoin as it draws — the two refuted claims with their block-range strips, the tally (proven, sealed, broken, burned), the deployed addresses — and each deep link above opens the console on the claim with its verdict first. The console reads the chain from your own browser, lets anyone sweep Ethereum and break an incomplete claim, and lets a borrower be underwritten end to end without cloning anything. npm run web serves both locally. Every verification behind the two refuted claims is on Creditcoin's own oracle dashboard, which nobody here can write to.

Two things a reader with a clone and no key can check first. npm run judge re-measures every number this repository and the submission quote — the contracts and their verification, the tally, both linked claims, the explorer counters, npm, the MCP Registry, the published build, the sixteen protocol entry points, the test and commit counts — and exits non-zero on any that no longer holds. And a bond here stands behind a specific line, not behind nothing: UtuhCredit.openLine reaches a claim only through UtuhRegistry.isUsable(claimId, exposure), the finalized claim is spent by the line it opens, underwrittenThrough consumes the history range, and the limit is capped at ten times the enforceable loss. Exposure is gated by the bond and consumed by the draw.


The problem

The Attestcoin Protocol proves that a source-chain transaction _happened_. A Merkle proof places the transaction in a block; a continuity proof anchors that block to an attestation stored on Creditcoin. The Block Prover precompile at 0x0FD2 checks both natively, synchronously, inside a single Creditcoin block.

What it cannot prove is that a _set_ of events is complete.

Whoever submits proofs chooses which proofs to submit. Every one of them verifies. Nothing in the protocol notices the ones that were left out.

For credit, that gap is fatal. The sentence every on-chain credit system needs is:

_This borrower has never been liquidated._

That is a statement about events which do not exist, and an inclusion proof can only ever speak about events which do. A borrower assembles their own history, submits the flattering half, and each proof checks out.

This is not hypothetical. Season 1 of this hackathon drew 76 submissions, and more than twenty of them were some form of on-chain credit score or reputation-based lending; one of those, CreditX, took a prize. Every one of them inherits this hole, the winner included — placing well is not the same as closing it, and an inclusion proof gives none of them a way to.

What this uses of Creditcoin's, and what it deliberately does not

npm run doctor (no key needed; given one it also reports the balance) ends by making a live request to every Creditcoin-owned surface this depends on, so the list below is checkable rather than asserted. A run on 2026-09-10:

Creditcoin ecosystem surfaces

ok USC Oracle dashboard 200 — every verifyAndEmit here is listed by source height ok testnet indexer 68,160 attestations of Ethereum, chain key 3 ok mainnet indexer 52,463 attestations of Ethereum, chain key 1 ok Creditcoin Mainnet RPC chain id 102030 ok Blockscout · registry UtuhRegistry verified ok Sourcify · registry chain 102031: match match, creation match ok Blockscout · credit UtuhCredit verified ok Sourcify · credit chain 102031: match match, creation match

On top of the protocol itself — both precompiles, both verifyAndEmit overloads, EvmV1Decoder, @gluwa/usc-contracts and @gluwa/usc-sdk, the hosted Proof Builder under both of its hostnames, and RawProofBuilder as the path that needs no hosted service at all.

The pins are deliberate. Gluwa published @gluwa/asc-contracts 0.2.1 on 2026-08-31 under the new ASC name, and the reference examples import from it; this tree stays on @gluwa/usc-contracts 0.1.2 and @gluwa/usc-sdk 0.18.0 (there is no newer SDK and no asc-sdk). 0.1.2's EvmV1Decoder functions are public, which is why the decoder links as a deployed library at 0x5cab…df3F; 0.2.1 made them internal and dropped the type-specific decoders Utuh never calls. The four it does call keep identical signatures in 0.2.1, and changing the pin changes bytecode and breaks the Blockscout and Sourcify match of the live deployment, so the rename lands on the merkle-claims branch, which redeploys anyway.

Two of those lines are worth reading twice. Every append and every refutation goes through verifyAndEmit rather than its view twin, so Creditcoin's own oracle dashboard is the record — the network logged this project's work, not the other way round. And the Creditcoin Mainnet indexer is read even though nothing here is deployed there: the console audits mainnet's attestors against Ethereum itself, because auditing only the network you deployed to leaves the produ

冒頭だけを表示しています。続きはリポジトリで読めます

PopNxに聞く