World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Live ArduPilot control over MAVLink: state, params, modes, prearm diagnosis, gated arm. SITL-first.
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 9/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 3/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 12/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
Ardupilot Mavlink MCP をインストールして。https://mcp.popnx.com/i/rmeadomavic-ardupilot-mavlink-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月13日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server Ardupilot Mavlink MCP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "ardupilot-mavlink": { "command": "uvx", "args": [ "ardupilot-mavlink-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Ardupilot Mavlink MCP のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
SettingsDeveloperEdit Config
{
"mcpServers": {
"ardupilot-mavlink": {
"command": "uvx",
"args": [
"ardupilot-mavlink-mcp"
]
}
}
}Ardupilot Mavlink MCP を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が Ardupilot Mavlink MCP を使っていると言うか、回答に Ardupilot Mavlink MCP のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ Ardupilot Mavlink MCP につなげません
Ardupilot Mavlink MCP はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
A · Ardupilot Mavlink MCP につなげるアプリを使う
B · その他 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server Ardupilot Mavlink MCP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user ardupilot-mavlink -- uvx ardupilot-mavlink-mcp 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Ardupilot Mavlink MCP のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --scope user ardupilot-mavlink -- uvx ardupilot-mavlink-mcpArdupilot Mavlink MCP が一覧にあり、接続済みと表示されれば OK です
Ardupilot Mavlink MCP を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が Ardupilot Mavlink MCP を使っていると言うか、回答に Ardupilot Mavlink MCP のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server Ardupilot Mavlink MCP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "ardupilot-mavlink": { "command": "uvx", "args": [ "ardupilot-mavlink-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Ardupilot Mavlink MCP のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
Ardupilot Mavlink MCP を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が Ardupilot Mavlink MCP を使っていると言うか、回答に Ardupilot Mavlink MCP のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Python (uv) を入れてください(1 回だけ)
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server Ardupilot Mavlink MCP を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "ardupilot-mavlink": { "type": "stdio", "command": "uvx", "args": [ "ardupilot-mavlink-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Ardupilot Mavlink MCP のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
uv --versionMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version
一度入れれば、uv を使うすべてのツールで使えます
Ardupilot Mavlink MCP を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が Ardupilot Mavlink MCP を使っていると言うか、回答に Ardupilot Mavlink MCP のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください
JSON 設定は下の「開発者向け」にあります
Claude Code
claude mcp add --scope user ardupilot-mavlink -- uvx ardupilot-mavlink-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"ardupilot-mavlink": {
"command": "uvx",
"args": [
"ardupilot-mavlink-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"ardupilot-mavlink": {
"command": "uvx",
"args": [
"ardupilot-mavlink-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"ardupilot-mavlink": {
"type": "stdio",
"command": "uvx",
"args": [
"ardupilot-mavlink-mcp"
]
}
}
}この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月18日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント rmeadomavic で確認済みです
コードの最終更新:4 か月前
MITを使用
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
OSV.dev に ardupilot-mavlink-mcp@0.1.0 の登録はありません
このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月16日
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/rmeadomavic-ardupilot-mavlink-mcp)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は4 か月前、最新バージョン(0.1.0)がレジストリに届いたのは5 か月前です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。
同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| これ Ardupilot Mavlink MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| ライセンス | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
An MCP server that lets an AI agent talk to an ArduPilot vehicle over MAVLink. Read state, inspect and change parameters, switch modes, read prearm failures, and (gated) arm or disarm. SITL-first.
Install: pipx install ardupilot-mavlink-mcp
mcp-name: io.github.rmeadomavic/ardupilot-mavlink-mcp
[!WARNING]
This tool can ARM and command a real aircraft. A bad command can spin props or fly a vehicle away. Defaults are built to stop that: actuation is OFF unless you pass
--enable-actuation, and even then it refuses a real (non-loopback) link unless you also pass--allow-real-vehicle. Develop against SITL. On hardware, bench-test with props off first. No warranty — you own the outcome.
Most ArduPilot tooling for LLMs targets post-flight log analysis. This one drives the live link: connect to a running vehicle, read its state and params, change modes, and diagnose why it won't arm — in the moment, not after landing. The useful case: point an agent at a vehicle that won't arm, have it read the params and the prearm STATUSTEXT, and tell you why, instead of you squinting at a GCS message log. The arm tool reports the real COMMAND_ACK result and hands back the prearm reasons on refusal; it never force-arms.
agent (MCP client) ardupilot-mcp vehicle
┌──────────────────┐ JSON-RPC ┌──────────────────────┐ MAVLink ┌──────────┐ │ Claude / etc. │ ───stdio────▶ │ FastMCP tools │ ──udp/tcp/ │ ArduPilot│ │ │ ◀─────────── │ │ │ serial──▶ │ (SITL │ └──────────────────┘ │ ▼ │ ◀────────── │ or FC) │ │ recv thread (1 reader) └──────────┘ │ ├─▶ message cache (latest/type) │ ├─▶ param store (request/collect) │ └─▶ COMMAND_ACK + STATUSTEXT └──────────────────────┘
MAVLink is an async stream; MCP tools are synchronous. One background thread owns the link and is the only reader — it caches the latest message of each type and routes PARAM_VALUE into a param store. Tool calls read from those caches (params block until the data arrives). No two threads ever call recv_match.
ardupilot_arm returns the COMMAND_ACK result and, on refusal, the prearm STATUSTEXT (e.g. AHRS: waiting for home, Accels inconsistent). Safety checks are respected — no ARMING_CHECK=0, no force-arm magic number.set confirmed by the echoed PARAM_VALUE.You need an ArduPilot SITL instance. From an ardupilot checkout:
# starts ArduCopter SITL; serves MAVLink on tcp:127.0.0.1:5760
sim_vehicle.py -v ArduCopter --console
Install and run the server (read-only by default):
pipx install ardupilot-mavlink-mcp # or: uv tool install ardupilot-mavlink-mcp
ardupilot-mavlink-mcp --connect tcp:127.0.0.1:5760
To allow parameter writes, mode changes, and arm/disarm against SITL, add --enable-actuation.
Claude Code:
claude mcp add ardupilot -- ardupilot-mavlink-mcp --connect tcp:127.0.0.1:5760
Claude Desktop / any mcpServers config:
{
"mcpServers": { "ardupilot": { "command": "ardupilot-mavlink-mcp", "args": ["--connect", "tcp:127.0.0.1:5760"] } } }
Connection strings are pymavlink syntax: tcp:127.0.0.1:5760 (SITL), udp:127.0.0.1:14550, serial:/dev/ttyACM0:115200.
| Tool | Kind | What it does |
|---|---|---|
ardupilot_connect | — | Connect to a vehicle. Default is local SITL. |
ardupilot_vehicle_state | read | Mode, armed, GPS, battery, attitude, position — from cache. |
ardupilot_recent_statustext | read | Recent STATUSTEXT/prearm messages. Read this to see why arming failed. |
ardupilot_get_param | read | Read one parameter. |
ardupilot_set_param | write | Set a parameter, confirmed via echoed PARAM_VALUE. |
ardupilot_list_params | read | List params, optional glob (ATC_RAT_*). |
ardupilot_set_mode | write | Send a request to set flight mode by name. |
ardupilot_arm / ardupilot_disarm | write | Gated. Confirmed via COMMAND_ACK. |
Write tools are gated and carry the MCP destructiveHint. Live telemetry is also exposed as the resource ardupilot://telemetry.
| Vehicle | Firmware | Status |
|---|---|---|
| ArduCopter | 4.5 | ✓ validated on SITL |
| ArduRover (UGV/USV) | 4.x | ~ mode map present, not yet validated |
| ArduPlane | 4.x | ~ mode map present, not yet validated |
| ArduSub | 4.x | ~ untested |
MAVLink2 is assumed. Not flown on hardware — SITL only so far.
--enable-actuation.--allow-real-vehicle is also set.arm, disarm, set_param, and set_mode all pass through this gate before sending.set_param rejects ARMING_CHECK writes (case-insensitive) on every link, even when both actuation flags are enabled.Working: reads plus gated parameter writes, mode changes, and arm/disarm against ArduCopter SITL. Validated three ways — unit tests (Python 3.10–3.12), a real-MAVLink-wire check (scripts/wire_check.py), and a live ArduPilot SITL run (scripts/sitl_check.py).
Open targets: validate Rover/Plane/Sub; mission upload/download and guided flight (takeoff/goto/land) are deferred — mission protocol is a stateful handshake and guided commands are fly-away risk. See ROADMAP.md.
git clone https://github.com/rmeadomavic/ardupilot-mcp && cd ardupilot-mcp
uv venv && uv pip install -e ".[dev]" pytest -q ruff check . && ruff format --check . python scripts/wire_check.py # offline real-wire check, no SITL needed
MIT — Kyle Adomavicius