emailmd
Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.
Transactional and broadcast email at cost. Your agent signs up, tests and sends; no API key.
これは「AI につながるアプリ」タブにあり、スターを使わず次の順で並びます
| 1. Claude のコネクタディレクトリにある | いいえ | |
|---|---|---|
| 2. チームが実際に試した | いいえ | |
| 3. タイのユーザー向け | いいえ | |
| 4. スターを除いた利用状況 | 20/100 | 人気 0 · 新しさ 12 · 応答中 8 · ユーザーのいいね +0 |
| 5. 登録日 | 2026-11-18 |
ユーザーのいいね: 0 · 順位に最大 5 点(1 人 1 点)加算。お金では買えません。
品質: 基本チェック 2/3 項目に合格(表示のみ、並び順には不使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
SendForAI をインストールして。https://mcp.popnx.com/i/sendforai-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 2/3 合格 · 質問内容は提供元のサーバー(sendforai.com)を通ります · ✓ コマンド確認済み 2026年11月18日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげます · 約 5 分
SendForAI のキーが必要です(提供元のサイトで作成) · claude.ai かデスクトップアプリで一度設定すれば、チャットで使えます · 無料アカウントは 1 つまで · Team/Enterprise はオーナー(Owner)が追加
CustomizeConnectors
ここからコピーして Claude の同じ名前の欄に貼り付け、Continue を押します
SendForAIhttps://sendforai.com/mcpRequest headers に、この名前と値を追加
AuthorizationBearer <ここにキーを貼り付け>キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
Claude が検出したサインイン設定の画面で Continue を押す · Authentication は作者の説明どおり(Sign in now・Sign in when needed・No sign in)を選び Add を押します
+ConnectorsSendForAI
SendForAI を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が SendForAI を使っていると言うか、回答に SendForAI のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ SendForAI につなげません
SendForAI は接続時に自分のキーが必要ですが、OpenAI のヘルプページは OAuth ログインしか説明しておらず、確認できたキー入力方法がありません
A · SendForAI につなげるアプリを使う
B · チャット・メール の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげます · 約 5 分
SendForAI のキーが必要です(提供元のサイトで作成)
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --transport http --scope user sendforai https://sendforai.com/mcp --header 'Authorization: Bearer your-value'Enter の前に「your-value」を自分のキーに書き換えてください
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
SendForAI が一覧にあり、接続済みと表示されれば OK です
SendForAI を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が SendForAI を使っていると言うか、回答に SendForAI のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげます · 約 5 分
SendForAI のキーが必要です(提供元のサイトで作成)
SendForAI の設定で Authorization が空です。自分のキーを入れて保存します
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
SendForAI を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が SendForAI を使っていると言うか、回答に SendForAI のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげます · 約 5 分
SendForAI のキーが必要です(提供元のサイトで作成)
SendForAI の設定で Authorization が空です。自分のキーを入れて保存します
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
SendForAI を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が SendForAI を使っていると言うか、回答に SendForAI のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Claude Code
claude mcp add --transport http --scope user sendforai https://sendforai.com/mcp --header 'Authorization: Bearer your-value'Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"sendforai": {
"url": "https://sendforai.com/mcp",
"headers": {
"Authorization": "Bearer your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"sendforai": {
"type": "http",
"url": "https://sendforai.com/mcp",
"headers": {
"Authorization": "Bearer your-value"
}
}
}
}Claude Code
claude mcp add --scope user sendforai -- npx -y @sendforai/mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"sendforai": {
"command": "npx",
"args": [
"-y",
"@sendforai/mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"sendforai": {
"command": "npx",
"args": [
"-y",
"@sendforai/mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"sendforai": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@sendforai/mcp"
]
}
}
}SENDFORAI_DOMAIN envSENDFORAI_PRIVATE_KEY_FILE envVERCEL_TOKEN 秘密 envCLOUDFLARE_API_TOKEN 秘密 env説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
npm: @sendforai/mcpこのサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
インターネット経由でつなげるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatOpen WebUIRaycast
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
ツールの名前と説明は、サーバーが2026年11月14日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。
get_pricingPublic, machine-readable pricing. Use it to compute cost before committing to a send.
get_domain_statusIdentity, SES verification status, DNS records still needed, and current sending capacity for the configured domain.
verify_domainCreate the SES identity for a domain on this account (default: the configured identity domain) and return the DKIM and MAIL FROM records to publish. Idempotent; call again to re-check.
list_domainsEvery domain this account can send from, with role (identity or delegated), status, SES status, warmup stage and daily cap.
add_domainLet this account send from another domain with the same key. First publish DNS TXT _sendforai. = "v=sfa1; delegate= " (if you have DNS access) or hand that record to your operator, then call this. If the record is not visible yet the response says exactly what to publish. Up to 5
get_capacityHow many emails can be sent right now: daily cap, sent today, remaining, warmup stage, and when the window resets.
get_usageEmails sent this period, SES cost, what has been billed, included allowance remaining, and a projection to period end.
plan_emailEverything send_email does except sending. Returns cost, capacity after send, suppression hits, and lint warnings with fixes. Call this before send_email when cost or deliverability matters.
send_emailSend a transactional email from the configured domain. Response includes id, cost, capacity, lint, and a signed receipt.
upsert_contactStore a contact for broadcasts. Contacts are unlimited on every plan. Data is arbitrary JSON you can filter on later.
list_contactsPage through contacts.
create_broadcastCreate a broadcast to subscribed contacts (optionally filtered by contact data). By default it waits for a human: the response includes approval_url. Hand that link to your operator; clicking it sends. Use dry_run to see recipients, cost, and lint first.
get_broadcastStatus, cost, approval_url (while awaiting approval), and progress (sent, queued, failed, cancelled, resumes_at) once sending starts.
send_broadcastStarts sending an approved broadcast in the background (status: sending). Poll get_broadcast for progress. Large Member broadcasts continue after the daily cap resets. Returns a 409 with the approval_url if a human has not approved it yet.
cancel_broadcastCancel a broadcast before or during sending. Emails already sent stay sent; the unsent remainder is cancelled.
import_contactsBulk import up to 10,000 contacts per call, deduplicated by email. Available in a sending month; on the free build tier the error explains what to do.
get_accountBalance, whether this month's $5 sending fee is paid, auto top-up, the monthly usage budget (used and remaining), emails used and included remaining, and every sending domain. Check this before a large send.
add_creditReturns a checkout_url for your human operator to add prepaid credit (minimum $10). Use it when a send returns balance_required. $5 is taken only in months you send to anyone outside your own domains (10,000 emails included), then $0.11/1k at cost. Pass auto_topup: true to let th
set_budgetLowering the budget applies immediately. Raising it returns an approval_url that only your human operator can approve; hand it over. Use when a send returns budget_exceeded.
set_auto_topupTurn auto top-up off, or change its amount. Turning it on requires a saved card from a human-completed add_credit.
billing_portalA Stripe billing portal link for your operator: update the saved card and download receipts.
list_eventsPull delivery, bounce, complaint, broadcast, and unsubscribe events by cursor. No webhook endpoint needed. Keep next_cursor between calls.
whoamiThe identity this server acts as, how it authenticates, and whether it is a sandbox.
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック
レジストリにソースのリポジトリが載っていないため、公開者(sendforai.com)とコードを照合できません
このリポジトリはまだGitHubから読み取っていません
このリポジトリはまだGitHubから読み取っていません
291ミリ秒で応答(HTTP 200)
サインイン不要
23件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした
まだ確認していません
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/sendforai-mcp)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
入力が必要なもの:Authorization
どちらでも使えます。パソコンにインストールしても、クラウド版につないでもかまいません。
GitHubリポジトリの最終更新は–、最新バージョン(0.1.2)がレジストリに届いたのは昨日です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URL で接続するので、リモート MCP を受け付けるアプリでも使えます。例:Web 版 ChatGPT(Business 以上はフル MCP、Pro は読み取りのみ)。
同じカテゴリには:emailmd, Kite Discord Bot Builder, e2a — email for AI agents, Infobip MCP, kernelCAD
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.
Build and fix Discord bots from a chat. Kite hosts them 24/7, with no code to deploy.
Authenticated email gateway for AI agents — per-agent inboxes, HITL approval, SPF/DKIM verified.
Infobip MCP server for omnichannel communication and messaging. SMS, RCS, WhatsApp, Viber and more.
CAD in ChatGPT and Claude: editable parts, STEP/STL/drawings, in-chat 3D, automatic checks.
| これ SendForAI | emailmd | Kite Discord Bot Builder | e2a — email for AI agents | Infobip MCP | kernelCAD | |
|---|---|---|---|---|---|---|
| 動く場所 | クラウドでもパソコンにインストールでも使える | クラウドでもパソコンにインストールでも使える | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | はい | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | はい | いいえ |
| 基本チェック | 2/3 | 5/5 | 4/4 | 4/4 | 4/4 | 4/4 |
| ライセンス | – | MIT | AGPL-3.0 | Apache-2.0 | MIT | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
リポジトリにREADMEが見つかりません