World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Validate S1000D data modules: XSD, BREX chain and reference resolution as one verification status.
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 9/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 12/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 21/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
S1000D Verify (S1000D Stack) をインストールして。https://mcp.popnx.com/i/shuji-bonji-s1000d-verify-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月17日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server S1000D Verify (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "s1000d-verify": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Verify (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
SettingsDeveloperEdit Config
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}S1000D Verify (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が S1000D Verify (S1000D Stack) を使っていると言うか、回答に S1000D Verify (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ S1000D Verify (S1000D Stack) につなげません
S1000D Verify (S1000D Stack) はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
A · S1000D Verify (S1000D Stack) につなげるアプリを使う
B · その他 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server S1000D Verify (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcp 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Verify (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcpS1000D Verify (S1000D Stack) が一覧にあり、接続済みと表示されれば OK です
S1000D Verify (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が S1000D Verify (S1000D Stack) を使っていると言うか、回答に S1000D Verify (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server S1000D Verify (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "s1000d-verify": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Verify (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
S1000D Verify (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が S1000D Verify (S1000D Stack) を使っていると言うか、回答に S1000D Verify (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server S1000D Verify (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "s1000d-verify": { "type": "stdio", "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Verify (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
S1000D Verify (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が S1000D Verify (S1000D Stack) を使っていると言うか、回答に S1000D Verify (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Claude Code
claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"s1000d-verify": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
npm: @shuji-bonji/s1000d-verify-mcpこのサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月20日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント shuji-bonji で確認済みです
コードの最終更新:3 日前
MITを使用
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
まだ確認していません
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/shuji-bonji-s1000d-verify-mcp)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は3 日前、最新バージョン(0.8.1)がレジストリに届いたのは3 日前です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.jsも必要です。
同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| これ S1000D Verify (S1000D Stack) | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| ライセンス | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
English | 日本語
An MCP server that lets an LLM know, with evidence, how far an S1000D® data module has been checked. It performs three steps — validation against the XML schema (XSD), a check against BREX (Business Rules Exchange), and resolution of references (dmRef, pmRef, ICN, internalRef and applicRefId) — and returns the results combined into a single verification status (verification). This verification status has the same shape as the one s1000d-reader-mcp embeds in its content responses.
[!IMPORTANT]
This is a personal project and is not affiliated with ASD (Aerospace, Security and Defence Industries Association of Europe). S1000D® is a registered trademark of ASD.
The S1000D specification, XML schemas, default BREX and official samples are not included in any package or repository, because their terms of use do not grant redistribution. To run XSD validation and checks against the default BREX, obtain them from s1000d.org yourself and point the
S1000D_SPEC_DIRenvironment variable at the extracted folder.
| Tool | Description |
|---|---|
verify_data_module | Validates one data module in the order well-formedness → XSD → BREX chain → references, and returns verification (the verification status) together with the details of each step (line numbers of XSD violations, locations of BREX violations, unresolved references and their reasons) |
validate_schema | Runs XSD validation only. The XSD to use is chosen from the file name in xsi:noNamespaceSchemaLocation and looked up under xml_schema_flat/ below S1000D_SPEC_DIR. The issue is read from the Issue number: line at the top of brex.xsd |
check_references | Collects references of 5 kinds (dmRef / pmRef / ICN / internalRef / applicRefId) and returns whether each target exists, with a reason. A dmRef to a chapter of the specification (model identification code S1000D) is not a broken reference, so it is reported separately |
verify_csdb | Validates the CSDB objects in a folder (DMC and PMC by default) in one run, and returns the verification status of each object and a count summary. Read the results in parts with offset / limit, and write the details to JSON with reportPath |
suggest_fixes | Runs the same verification as verify_data_module and returns fix candidates for each finding. The server decides the candidates and adds their origin (BREX rule ID, XSD definition, CSDB, ids in the document, ACT/CCT/PCT) and their certainty (exact / several / none). If product is given, applicability that cannot be decided because the product lacks a value also gets candidate values. It does not apply fixes |
reconcile_dml | Reconciles a data module list (DML) or a data dispatch note (DDN) with the CSDB. For each DML entry (dmRef / pmRef / infoEntityRef / dmlRef) and each DDN delivery item (dispatchFileName) it returns found / issue-mismatch (the object exists but not the listed issue; the latest issue in the CSDB is given) / not-found / not-checked (commentRef), plus the DMs and PMs that are in the CSDB but not listed in the DML (notListed). Omit both path and xml to reconcile every DML and DDN in the CSDB. dmlType / dmlEntryType / issueType are not interpreted |
list_schemas | Returns the list of xml_schema_flat/ folders found under S1000D_SPEC_DIR (issue, number of XSDs, schema names). Use it to investigate the cause of schema-not-found |
verification)| Field | Value | Meaning |
|---|---|---|
schema.state | valid / invalid / schema-not-found / not-run | XSD found and validated with 0 violations / violations found / XSD not found (reason in reason) / skipped with skip |
brex.state | passed / violations / incomplete / not-run | 0 violations in every layer / violations found / an unresolved BREX or a rule that cannot be evaluated / skipped |
references.state | resolved / unresolved / not-run | 0 unresolved / unresolved references found / skipped |
schema-not-found is not valid. It means that XSD validation did not run.
[!WARNING]
- It does not decide conformance to S1000D.
schema: validandbrex: passedmean only that no errors were found against the XSD and the BREX rules that a machine can check.nonContextRules(agreements written as prose) are returned asmanualChecks, and a person makes the judgement. A project's business rules document is outside the scope of every tool.
- It does not return explanations of BREX rules or the meaning of values. That is the job of
explain_brex/lookup_valueins1000d-brex-mcp. Severity level codes (brsl01tobrsl99) are returned as they are.
- It does not evaluate applicability (which product the content applies to).
check_referencesonly looks at whether the target ofapplicRefIdexists. The evaluation is done bys1000d-reader-mcp. The exception issuggest_fixeswithproduct, which reports only applicability that cannot be decided because the product lacks a value.
- It does not apply fixes to the document.
suggest_fixesonly returns candidates. Have the LLM choose among the candidates, and ask the user whenconfidenceisnone(theinstructionssay the same).
- It does not interpret DML values (
dmlType/dmlEntryType/issueType).reconcile_dmlcompares identifiers and issues only; it does not verify the content of the listed objects (useverify_csdbfor that).
[!NOTE]
In a document that violates the XSD, elements may be in positions that differ from the specification, so BREX violations can be reported falsely or hidden. When
schema.stateisinvalid, read the BREX results as a rough indication only (the response also says so in_notes).
| Environment variable | Description |
|---|---|
S1000D_SPEC_DIR | The folder where you extracted the S1000D distribution you obtained. The XSDs (xml_schema_flat/; extract the inner "XML Schema Package" zip beforehand) and the default BREX (DMC-S1000D-*-04-10-0301-00A-022A-D_*.XML) are looked up below this folder. The copies of the XSDs inside the data dictionary are not used (their imports are absolute URLs and cannot be resolved offline) |
S1000D_CSDB_DIR | The folder that holds the project's data modules. Several folders can be given, separated by : (; on Windows). The referenced DM, PM and ICN files and the BREX in the middle of the chain are looked up here |
Folders can also be given with the tool argument csdbDirs. When the argument is given, only those folders are used; S1000D_CSDB_DIR and csdbDirs in the config file are not used (they are not added together). Folders that do not exist are skipped and listed in _notes of the response. When none is left, the tool returns no-csdb (below).
An error that the caller can fix by changing an argument is not returned as a tool failure (isError) but in the same shape as s1000d-writer-mcp.
{ "error": { "code": "file-not-found", "path": "/path", "detail": "File not found: /path/to/DMC-….XML" } }
code | Meaning |
|---|---|
file-not-found | There is no file at the path given in the argument |
no-csdb | No CSDB folder exists (pass csdbDirs or set S1000D_CSDB_DIR) |
input-error | An argument is malformed, or a required argument is missing |
path names the argument to fix (/path, /csdbDirs and so on), not a file path.
If S1000D_SPEC_DIR / S1000D_CSDB_DIR are not set, the server reads the config file ~/.config/s1000d-stack/config.json (under XDG_CONFIG_HOME if it is set; S1000D_CONFIG changes the location). Claude Desktop does not pass environment variables to servers installed as plugins, and does not substitute ${VAR} written in the plugin's env. When you install the server as a plugin, write the folders here.
{
"specDir": "/path/to/s1000d/issue-7", "csdbDirs": ["/path/to/your/csdb"] }
Environment variables take precedence when they are set. Paths that start with ~/ are accepted. The config file is read again on every call, so the server does not need to be restarted after you edit it.
{
"mcpServers": { "s1000d-verify": { "command": "npx", "args": ["-y", "@shuji-bonji/s1000d-verify-mcp"], "env": { "S1000D_SPEC_DIR": "/path/to/s1000d/issue-7", "S1000D_CSDB_DIR": "/path/to/your/csdb" } } } }
The default is stdio. With --http the server starts over Streamable HTTP, so a CSDB product's server or a web application can call it over HTTP (the embedding foundation of stage 2.5).
npx -y @shuji-bonji/s1000d-verify-mcp --http # http://127.0.0.1:3000/mcp
npx -y @shuji-bonji/s1000d-verify-mcp --http --port 3102 --path /verify
| Argument | Default | Meaning |
|---|---|---|
--host | 127.0.0.1 | Address to bind to |
--port | 3000 | Port; 0 picks a free port |
--path | /mcp | Path of the MCP endpoint. GET /healthz returns the name and version |
--allowed-host | (see below) | Host names allowed in the Host header; comma-separated or repeated |
--allowed-origin | (see below) | Host names allowed in the Origin header |
When --host is a loopback address (127.0.0.1 / ::1 / localhost), Host and Origin are limited to localhost names (DNS rebinding protection). When bound to any other address they are not checked, so put the server behind the product's reverse proxy or authentication. Authentication, authorization and multi-tenancy are not part of this server. Environment variables and the config file work the same as with stdio.
All validation logic lives in the shared library @shuji-bonji/s1000d-core; this server holds only the interpretation of arguments and the shape of the responses. XSD validation uses libxml2-wasm (the WebAssembly build of libxml2), and each XSD is compiled once and reused, so the 106 official samples of Issue 7 are validated in under 0.5 seconds. The BREX check calls the same functions as s1000d-brex-mcp, so the results of the two servers match.
npm install
npm test # runs with self-made test data only npm run test:spec # uses the distribution you obtained (set the location with S1000D_SPEC_DIR; default ../../specs/s1000d/issue-7) npm run build && S1000D_SPEC_DIR=/path/to/issue-7 npm start # starts over stdio
MIT. S1000D® is a registered trademark of ASD. This software is not affiliated with ASD and does not include the specification, schemas or official samples.