World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Builds S1000D data modules from structured drafts, verifies them, applies only unambiguous fixes.
作者による原文
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 7/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 12/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 19/100 |
品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
S1000D Writer (S1000D Stack) をインストールして。https://mcp.popnx.com/i/shuji-bonji-s1000d-writer-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月18日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server S1000D Writer (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "s1000d-writer": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Writer (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
SettingsDeveloperEdit Config
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}S1000D Writer (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が S1000D Writer (S1000D Stack) を使っていると言うか、回答に S1000D Writer (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ S1000D Writer (S1000D Stack) につなげません
S1000D Writer (S1000D Stack) はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
A · S1000D Writer (S1000D Stack) につなげるアプリを使う
B · その他 の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
Claude Code につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server S1000D Writer (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcp 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Writer (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcpS1000D Writer (S1000D Stack) が一覧にあり、接続済みと表示されれば OK です
S1000D Writer (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が S1000D Writer (S1000D Stack) を使っていると言うか、回答に S1000D Writer (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server S1000D Writer (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "s1000d-writer": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Writer (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
S1000D Writer (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が S1000D Writer (S1000D Stack) を使っていると言うか、回答に S1000D Writer (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
先にパソコンへ Node.js を入れてください(1 回だけ)
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server S1000D Writer (S1000D Stack) を入れてください。順番に:1) node -v で Node.js があるか確認。なければ https://nodejs.org/en/download から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "s1000d-writer": { "type": "stdio", "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、S1000D Writer (S1000D Stack) のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
node -vMac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: 公式ダウンロードページで LTS 版と、クリックで進むインストーラーを選びます:Mac は .pkg、Windows は .msi。ダブルクリックして最後まで進めるだけで、curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: node -v
一度入れれば、Node.js を使うすべてのツールで使えます
S1000D Writer (S1000D Stack) を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が S1000D Writer (S1000D Stack) を使っていると言うか、回答に S1000D Writer (S1000D Stack) のツール名が出れば接続成功です
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Claude Code
claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"s1000d-writer": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
npm: @shuji-bonji/s1000d-writer-mcpこのサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月20日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント shuji-bonji で確認済みです
コードの最終更新:一昨日
MITを使用
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
まだ確認していません
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/shuji-bonji-s1000d-writer-mcp)質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
まだレビューはありません
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は一昨日、最新バージョン(0.6.0)がレジストリに届いたのは一昨日です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.jsも必要です。
同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| これ S1000D Writer (S1000D Stack) | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 |
| キーが必要 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | いいえ | いいえ | いいえ |
| 基本チェック | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| ライセンス | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
English | 日本語
An MCP server that lets an LLM create S1000D® data modules without writing XML. The LLM passes a structured draft and numbering rules; the server builds the XML, verifies it against the XSD, the BREX and the references, and applies automatically only the fixes that have exactly one candidate (exact). A fix with several candidates is applied only from a selection, and a value outside the candidates is never accepted. By default nothing is written.
[!IMPORTANT]
This is a personal project and is not affiliated with ASD (Aerospace, Security and Defence Industries Association of Europe). S1000D® is a registered trademark of ASD.
The S1000D specification, XML schemas, default BREX and official samples are not included in any package or repository, because their terms of use do not grant redistribution. Obtain them from s1000d.org and point the
S1000D_SPEC_DIRenvironment variable at the extracted folder.
| Tool | Description |
|---|---|
build_data_module | Builds a data module from one draft (descript, proced, process, fault or PM) and numbering rules. The DMC, ICN and issue come from the ledger (ledger) and the CSDB, and the same sourceId always gets the same DMC. After building, it verifies the XSD, BREX and references, and applies only exact fixes, up to maxFixRounds rounds. The remaining fixes are returned in fixes[] with their candidates |
convert_manual | Converts an experiential manual (@shuji-bonji/experiential-manual-model) into one data module per topic plus a publication module. Descriptions, procedures and fault isolation map directly; a screen flow becomes one process data module plus one procedure per screen. References between DMs, the PM and ICNs are resolved on top of the CSDB overlaid with the DMs just built and the ICN originals found on disk. What the conversion cannot represent is returned in notRepresented as counts |
apply_fixes | Applies the fixes you chose from the candidates in fixes[]. A selection must be a copy of a candidate; a value outside the candidates, or one that does not fit a range, goes to rejected with a reason. It re-verifies after applying |
create_comment | Builds a comment data module (comment) and verifies it. The sequence number is the next one in the CSDB |
extract_segments | Takes the sentences a person reads out of a data module (titles, paragraphs, steps, warnings, table cells, figure captions) so they can be translated. Inline elements are replaced by {1}, {2} placeholders, and skeletonHash is returned |
apply_segments | Puts translated sentences back into the data module they were taken from. The DMC stays the same and only the language changes. It stops with skeleton-mismatch when the data module changed after extraction |
write: true does the server write DMC-….XML into the first folder of csdbDirs (or the first of S1000D_CSDB_DIR). With no destination it writes nothing and returns the reason (no-csdb-dir).write-conflict) unless overwrite: true is passed.schema-invalid) unless allowInvalid: true is passed. schema-not-found (no XSD available) is not a violation; the file is written as unverified.write: true, convert_manual also copies the original assets under their ICN file names.Only a fix whose confidence is exact and which has exactly one candidate is applied (for example, replacing a value when the BREX allows a single responsible company, or removing an element the BREX forbids). several (more than one candidate, or a value given as a range) and none are not applied and are returned in fixes[]. The user chooses, and the server never fixes with a value outside the candidates. Each applied fix is returned in appliedFixes[] with the values before and after.
verification)Every response carries the verification status of the XSD, the BREX and the references. A missing XSD is reported as schema-not-found and a skipped step as not-run; neither is valid. The server reports the result of verification only: it does not judge conformance to S1000D and does not interpret severity.
A mistake in the draft or the numbering rules is returned not as isError but as error: { code: "input-error", path, detail }. path is the location of the mistake (for example /body[1] or /allocation/rules/infoCodeByKind/proced). Fix it and call again.
[!WARNING]
- It does not accept XML written by an LLM. It builds only from a draft. The tools that take existing XML (
apply_fixes,extract_segments,apply_segments) do not change the structure of the document.
- It does not fix with a value outside the candidates. There is no entry point for writing a free value.
- It does not skip verification. A built XML is always verified before it is returned.
- It does not judge conformance to S1000D or interpret severity. Read the violations in
s1000d-verify-mcpand the explanation of BREX rules ins1000d-brex-mcp.
- It does not translate. It only takes sentences out and puts them back. The LLM or a person translates.
- It does not create illustrations or judge Simplified Technical English (STE). For an illustration it only allocates an ICN and inserts the reference.
- What a data module cannot represent, such as hotspot coordinates or part of
scopeRefsin an experiential manual, is reported innotRepresentedand never dropped silently.
-
convert_manualdoes not build the data module of a topic whoseprerequisiteslist an item without an identifier (natoStockNumberormanufacturerCode) or withoutquantity. That row ofdataModules[]carrieserror(input-error, with the path of the item); the other data modules are still built. S1000D requires an identifier and a quantity for each item, and leaving the item out would writenoSupplies, which reads as "nothing is required".
- It does not create an ACT, CCT or PCT. Applicability relies on the
applicof the draft and an existing applicability repository. When a draft given tobuild_data_modulehas noapplic, the server does not build it and returnsinput-error(pathis/applic). The server does not decide applicability, so give at leastapplic.displayText(convert_manualusesdefaultApplic, by default the display text "All", for topics withoutscopeRefs).
| Environment variable | Meaning |
|---|---|
S1000D_SPEC_DIR | The folder where you extracted the S1000D distribution you obtained. The XSDs (xml_schema_flat/) and the default BREX are searched under it |
S1000D_CSDB_DIR | The folder holding the project's data modules. Several can be given, separated by : (; on Windows). The BREX chain, reference targets and existing issues are searched here, and the first folder is the write destination |
You can also give folders with the tool argument csdbDirs (the first one is the write destination). When the argument is given, only those folders are used; S1000D_CSDB_DIR and csdbDirs in the config file are not used (they are not added together). Folders that do not exist are skipped and listed in _notes of the response. The first folder may not exist yet; it is created with write: true.
When S1000D_SPEC_DIR / S1000D_CSDB_DIR are not set, the server reads the config file ~/.config/s1000d-stack/config.json (under XDG_CONFIG_HOME if set; the location can be changed with S1000D_CONFIG). Claude Desktop does not pass environment variables to a server installed as a plugin, so write the settings here in that case.
{
"specDir": "/path/to/s1000d/issue-7", "csdbDirs": ["/path/to/your/csdb"] }
Environment variables take precedence when they are set. The config file is read again on every call.
{
"mcpServers": { "s1000d-writer": { "command": "npx", "args": ["-y", "@shuji-bonji/s1000d-writer-mcp"], "env": { "S1000D_SPEC_DIR": "/path/to/s1000d/issue-7", "S1000D_CSDB_DIR": "/path/to/your/csdb" } } } }
The default is stdio. With --http the server starts over Streamable HTTP.
npx -y @shuji-bonji/s1000d-writer-mcp --http # http://127.0.0.1:3000/mcp
npx -y @shuji-bonji/s1000d-writer-mcp --http --port 3102 --path /writer
| Argument | Default | Meaning |
|---|---|---|
--host | 127.0.0.1 | Address to bind to |
--port | 3000 | Port; 0 picks a free port |
--path | /mcp | Path of the MCP endpoint. GET /healthz returns the name and version |
--allowed-host | (see below) | Host names allowed in the Host header; comma-separated or repeated |
--allowed-origin | (see below) | Host names allowed in the Origin header |
When --host is a loopback address, Host and Origin are limited to localhost names (DNS rebinding protection). When bound to any other address they are not checked, so put the server behind the product's reverse proxy or authentication. Because this server can write files, do not expose it without authentication.
All building, verification, fixing, comment and segment code lives in the shared library @shuji-bonji/s1000d-core; this server holds only the interpretation of arguments, the shape of the responses and the conversion from a manual to drafts (src/convert/). The input schemas import the definitions of core's draft.schema.json. The conversion is also available as @shuji-bonji/s1000d-writer-mcp/convert.
npm install
npm test # runs on self-made test data only (tests/fixtures/) npm run test:spec # uses the distribution you obtained (location given by S1000D_SPEC_DIR; default ../../specs/s1000d/issue-7) npm run build && S1000D_SPEC_DIR=/path/to/issue-7 S1000D_CSDB_DIR=/path/to/csdb npm start # start over stdio
MIT. S1000D® is a registered trademark of ASD. This software is not affiliated with ASD and does not include the specification, schemas or official samples.