プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

F-sąskaita MCP by usefulapi

作者:m190バージョン 1.0.0i★ –iクラウドで動く
レジストリ名io.usefulapi/f-saskaita

インストール

概要

作者による説明(英語の原文)

Read invoices, expenses and PDFs; create invoices and record expenses in F-sąskaita.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: 会計・財務・税務

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://f-saskaita.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http f-saskaita https://f-saskaita.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "f-saskaita": {
      "url": "https://f-saskaita.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "f-saskaita": {
      "type": "http",
      "url": "https://f-saskaita.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://f-saskaita.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月8日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • fsaskaita_get_profile

    Get the business that the token belongs to: name, business type, address, VAT code and company code. A good first call. GET /profile.

  • fsaskaita_list_currencies

    List the currency codes and titles that invoices and expenses accept. GET /currencies.

  • fsaskaita_list_invoices

    List finalized invoices, newest first, 50 per page. Drafts made in the app are not included. The meta block gives current_page, last_page and total. GET /invoices.

  • fsaskaita_get_invoice

    Get one invoice with its seller, buyer, lines (products), payment options, totals and share_link. GET /invoices/{invoice}.

  • fsaskaita_download_invoice_pdf

    Download the PDF of one invoice. Returns the file as base64 with its content type and file name. Files over 3 MB are refused. GET /invoices/{invoice}/download.

  • fsaskaita_list_expenses

    List expenses, newest first, 50 per page. Each item has date, total, currency, seller and timestamps. GET /expenses.

  • fsaskaita_get_expense

    Get one expense: date, total (with VAT), currency, seller and timestamps. The stored VAT and supplier invoice number are not returned. GET /expenses/{expense}.

  • fsaskaita_download_expense_file

    Download the document file (receipt or invoice) of one expense. Returns the file as base64 with its content type and file name. Files over 3 MB are refused. GET /expenses/{expense}/download.

  • fsaskaita_create_invoice

    WRITE: create and finalize a new invoice in the business. It takes a number, queues its PDF and fires the invoice.created webhook. Omit invoice_number to take the next number of the series. The call is NOT repeatable: after a network error, list invoices before you retry. POST /i

  • fsaskaita_update_invoice

    WRITE: replace EVERY field of an existing invoice with the values you send. Read the invoice first with fsaskaita_get_invoice and resend all of it. invoice_number is required: without it the invoice is renumbered. Lines, payment options and seller fields are rewritten and the PDF

  • fsaskaita_create_expense

    WRITE: record a new expense with its document file (receipt or invoice from a supplier). The file is required. The call fires the expense.created webhook and is NOT repeatable: list expenses before you retry after a network error. POST /expenses (multipart).

  • fsaskaita_update_expense

    WRITE: replace EVERY field of an existing expense. Read it first with fsaskaita_get_expense and resend all of it. Stored VAT and supplier invoice number are not returned, so send them again if you need them. The file is optional: when you send one it replaces the stored file. PUT

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    18ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    12件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

会計・財務・税務のほかのサーバーとの比較i

  • このカテゴリのほかの2908件のうち0%よりスターが多い
  • このカテゴリのほかの2908件のうち100%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの2908件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

F-sąskaita MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.0)がレジストリに届いたのは今日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Finance Toolkit, SolidInvoice, Korea Tax Calculator

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Finance Toolkit

作者:JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

パソコンでもクラウドでも★ 5,496MIT昨日更新
インストール

SolidInvoice

作者:SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

クラウドで動く★ 981MIT8 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

F-sąskaita MCP by usefulapi

Use your F-sąskaita account from Claude, Cursor, or any MCP client. Read invoices, expenses and their PDFs, and create invoices and record expenses. Hosted, no local install: connect with your own credentials.

Live endpoint: https://f-saskaita.usefulapi.io/mcp · Homepage: https://usefulapi.io

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://f-saskaita.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http f-saskaita https://f-saskaita.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "f-saskaita": { "url": "https://f-saskaita.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your F-sąskaita credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/f-saskaita/

On first connect you provide a business API token (F-sąskaita → Settings → Integrations → API). The server validates it and stores it per user. No keys go in config files.

Tools

ToolTypeWhat it does
fsaskaita_get_profilereadGet business profile
fsaskaita_list_currenciesreadList currencies
fsaskaita_list_invoicesreadList invoices
fsaskaita_get_invoicereadGet an invoice
fsaskaita_download_invoice_pdfreadDownload invoice PDF
fsaskaita_list_expensesreadList expenses
fsaskaita_get_expensereadGet an expense
fsaskaita_download_expense_filereadDownload expense file
fsaskaita_create_invoicewriteCreate an invoice
fsaskaita_update_invoicewriteReplace an invoice
fsaskaita_create_expensewriteCreate an expense
fsaskaita_update_expensewriteReplace an expense
fsaskaita_usage_statusmetaUsage status (free-tier meter)
fsaskaita_request_featuremetaRequest a missing feature
fsaskaita_upgrademetaUpgrade to Pro or Pro+
fsaskaita_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with fsaskaita_upgrade (it returns a Stripe Checkout link). Cancel any time with fsaskaita_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running fsaskaita_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT — see LICENSE. Documentation only; the server is hosted.

PopNxに聞く