プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

KashFlow MCP by usefulapi

作者:m190バージョン 1.14.3i★ –iクラウドで動く
レジストリ名io.usefulapi/kashflow

インストール

概要

作者による説明(英語の原文)

Read KashFlow invoices, customers, suppliers, banking and reports; add customers, notes.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: 会計・財務・税務

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://kashflow.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http kashflow https://kashflow.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "kashflow": {
      "url": "https://kashflow.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "kashflow": {
      "type": "http",
      "url": "https://kashflow.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://kashflow.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • kashflow_get_company_details

    The KashFlow company: name, address, contact, VAT registration, currency, payment terms and business type. SOAP GetCompanyDetails.

  • kashflow_list_customers

    All customers (name, code, contact, email, phone, address, VAT number, payment terms, notes), paged here: the reply says total and next_offset. SOAP GetCustomers.

  • kashflow_get_customer

    One customer by its KashFlow customer code (the short code shown in the customer list, e.g. ACME01). SOAP GetCustomer.

  • kashflow_get_customer_by_id

    One customer by its numeric CustomerID (as returned in other replies). SOAP GetCustomerByID.

  • kashflow_find_customer_by_email

    The customer whose e-mail address matches. SOAP GetCustomerByEmail.

  • kashflow_get_customer_balance

    What one customer owes: the total invoiced value and the outstanding balance. SOAP GetCustomerBalance.

  • kashflow_create_customer

    WRITE: create a new customer. The code must be unique (KashFlow refuses a code that exists) and nothing existing is changed. Returns the new CustomerID. SOAP InsertCustomer.

  • kashflow_list_suppliers

    All suppliers (name, code, contact, email, phone, address, VAT number, payment terms), paged here: the reply says total and next_offset. SOAP GetSuppliers.

  • kashflow_get_supplier

    One supplier by its KashFlow supplier code. SOAP GetSupplier.

  • kashflow_create_supplier

    WRITE: create a new supplier. The code must be unique (KashFlow refuses a code that exists) and nothing existing is changed. Returns the new SupplierID. SOAP InsertSupplier.

  • kashflow_get_invoice

    One sales invoice by its invoice number: customer, dates, lines (description, quantity, rate, VAT), net, VAT, amount paid and a link. SOAP GetInvoice.

  • kashflow_list_invoices

    Sales invoices dated within a range (inclusive; a bare end date means the end of that day), paged here. Dates are yyyy-mm-dd. SOAP GetInvoicesByDateRange.

  • kashflow_list_customer_invoices

    All sales invoices of one customer, by numeric CustomerID (see kashflow_get_customer for the id), paged here. SOAP GetInvoicesForCustomer.

  • kashflow_list_unpaid_invoices

    All sales invoices not yet paid in full, paged here. SOAP GetInvoices_Unpaid.

  • kashflow_list_overdue_invoices

    All sales invoices past their due date and not paid in full, paged here. SOAP GetInvoices_Overdue.

  • kashflow_list_recent_invoices

    The most recently created sales invoices. SOAP GetInvoices_Recent.

  • kashflow_list_invoice_payments

    The payments recorded against one sales invoice (date, amount, method, bank account, note), by invoice number. SOAP GetInvoicePayment.

  • kashflow_list_payments_by_date

    Customer payments received within a date range (date, amount, invoice, method, bank account). KashFlow returns them a page at a time: set page_number 1, 2, ... until a page comes back empty. Dates are yyyy-mm-dd. SOAP GetInvoicePaymentsByDateRange.

  • kashflow_get_invoice_notes

    The notes attached to one sales invoice, by its InvoiceDBID (the numeric id in invoice replies, not the invoice number). SOAP GetInvoiceNotes.

  • kashflow_add_invoice_note

    WRITE: add a note to a sales invoice, by its InvoiceDBID (the numeric id in invoice replies). Existing notes and the invoice are not changed. SOAP InsertInvoiceNote.

  • kashflow_list_quotes

    All sales quotes (same shape as invoices), paged here. SOAP GetQuotes.

  • kashflow_get_receipt

    One purchase (supplier invoice / receipt) by its receipt number: supplier, dates, lines, net, VAT, amount paid. SOAP GetReceipt.

  • kashflow_list_recent_receipts

    The most recently created purchases (supplier invoices / receipts). SOAP GetReceipts_Recent.

  • kashflow_list_supplier_receipts

    All purchases (supplier invoices / receipts) of one supplier, by numeric SupplierID (see kashflow_get_supplier), paged here. SOAP GetReceiptsForSupplier.

  • kashflow_list_products

    The product catalogue (name, code, description, price, stock level), paged here. SOAP GetProducts.

  • kashflow_list_bank_accounts

    The bank accounts (AccountID, name, nominal code). SOAP GetBankAccounts.

  • kashflow_list_bank_transactions

    The transactions of one bank account (date, money in/out, VAT, type, comment, customer/supplier), by AccountID from kashflow_list_bank_accounts, paged here. SOAP GetBankTransactions.

  • kashflow_get_bank_balance

    The balance of one bank account on a date (default today). SOAP GetBankBalance.

  • kashflow_list_nominal_codes

    The chart of accounts: nominal codes with their names. SOAP GetNominalCodes.

  • kashflow_list_vat_rates

    The VAT rates set up in the account. SOAP GetVATRates.

  • kashflow_list_projects

    The projects defined in the account (id, name). SOAP GetProjects.

  • kashflow_get_profit_and_loss

    The profit and loss report for a date range: turnover, cost of sales, gross profit, expenses and net profit, with the lines of each section. SOAP GetProfitAndLoss.

  • kashflow_get_balance_sheet

    The balance sheet at a date (default today): fixed assets, current assets, current liabilities, capital and reserves with the lines of each. SOAP GetBalanceSheet.

  • kashflow_get_trial_balance

    The trial balance for a date range: every nominal code with debit, credit and balance. SOAP GetTrialBalance.

  • kashflow_get_aged_debtors

    Who owes you money at a date (default today), aged into current, three periods and older, per customer. SOAP GetAgedDebtors.

  • kashflow_get_aged_creditors

    Who you owe money to at a date (default today), aged into current, three periods and older, per supplier. SOAP GetAgedCreditors.

  • kashflow_get_vat_report

    The VAT return figures (boxes 1 to 9) for a period, and whether it was submitted to HMRC. SOAP GetVATReport.

  • kashflow_get_kpis

    Key figures for a date range (income, expenses, profit and similar, as name/value pairs). SOAP GetKPIs.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    59ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    38件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

会計・財務・税務のほかのサーバーとの比較i

  • このカテゴリのほかの1720件のうち0%よりスターが多い
  • このカテゴリのほかの1720件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1720件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

KashFlow MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.14.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Finance Toolkit, SolidInvoice, Korea Tax Calculator

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Finance Toolkit

作者:JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

パソコンでもクラウドでも★ 5,496MIT昨日更新
インストール

SolidInvoice

作者:SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

クラウドで動く★ 981MIT7 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

KashFlow MCP by usefulapi

Use KashFlow from Claude, Cursor, or any MCP client — work with your invoices, customers, suppliers, banking and accounting reports. Hosted, no local install: connect with your own KashFlow credentials.

Live endpoint: https://kashflow.usefulapi.io/mcp · Homepage: https://usefulapi.io/kashflow

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://kashflow.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http kashflow https://kashflow.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "kashflow": { "url": "https://kashflow.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your KashFlow credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/kashflow/

On first connect you'll enter your KashFlow username and password (or the separate API password; enable API access under Apps > API Settings). They are validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
kashflow_get_company_detailsreadGet company details
kashflow_list_customersreadList customers
kashflow_get_customerreadGet customer by code
kashflow_get_customer_by_idreadGet customer by id
kashflow_find_customer_by_emailreadFind customer by email
kashflow_get_customer_balancereadGet customer balance
kashflow_create_customerwriteCreate customer
kashflow_list_suppliersreadList suppliers
kashflow_get_supplierreadGet supplier by code
kashflow_create_supplierwriteCreate supplier
kashflow_get_invoicereadGet invoice by number
kashflow_list_invoicesreadList invoices by date range
kashflow_list_customer_invoicesreadList a customer's invoices
kashflow_list_unpaid_invoicesreadList unpaid invoices
kashflow_list_overdue_invoicesreadList overdue invoices
kashflow_list_recent_invoicesreadList recent invoices
kashflow_list_invoice_paymentsreadList payments of an invoice
kashflow_list_payments_by_datereadList invoice payments by date range
kashflow_get_invoice_notesreadGet invoice notes
kashflow_add_invoice_notewriteAdd invoice note
kashflow_list_quotesreadList quotes
kashflow_get_receiptreadGet purchase by number
kashflow_list_recent_receiptsreadList recent purchases
kashflow_list_supplier_receiptsreadList a supplier's purchases
kashflow_list_productsreadList products
kashflow_list_bank_accountsreadList bank accounts
kashflow_list_bank_transactionsreadList bank transactions
kashflow_get_bank_balancereadGet bank balance
kashflow_list_nominal_codesreadList nominal codes
kashflow_list_vat_ratesreadList VAT rates
kashflow_list_projectsreadList projects
kashflow_get_profit_and_lossreadGet profit and loss
kashflow_get_balance_sheetreadGet balance sheet
kashflow_get_trial_balancereadGet trial balance
kashflow_get_aged_debtorsreadGet aged debtors
kashflow_get_aged_creditorsreadGet aged creditors
kashflow_get_vat_reportreadGet VAT report
kashflow_get_kpisreadGet KPIs
kashflow_usage_statusmetaUsage status (free-tier meter)
kashflow_request_featuremetaRequest a missing feature
kashflow_upgrademetaUpgrade to Pro or Pro+
kashflow_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per account)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with kashflow_upgrade (it returns a Stripe Checkout link). Cancel any time with kashflow_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running kashflow_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

PopNxに聞く