プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

PlentyONE MCP by usefulapi

作者:m190バージョン 1.6.3i★ –iクラウドで動く
レジストリ名io.usefulapi/plentymarkets

インストール

概要

作者による説明(英語の原文)

Review PlentyONE orders, items, stock and contacts; add comments and update order status.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: ネットショップ・決済

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://plentymarkets.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http plentymarkets https://plentymarkets.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "plentymarkets": {
      "url": "https://plentymarkets.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "plentymarkets": {
      "type": "http",
      "url": "https://plentymarkets.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://plentymarkets.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • plentymarkets_list_orders

    List orders (sales orders, returns, credit notes ...) with filters. Newest first with sort_by createdAt and sort_order desc. Returns {page, totalsCount, isLastPage, entries[]}; each entry has the id, typeId (1 = sales order), statusId, plentyId, createdAt, amounts and the order i

  • plentymarkets_get_order

    Get one order by id: status, amounts, dates, properties, order items, address relations. Add related data with `with` (addresses, comments, payments, documents, shippingPackages ...). GET /rest/orders/{orderId}.

  • plentymarkets_get_order_status_history

    The status changes of an order: which status, when, and by which user. GET /rest/orders/{orderId}/status-history.

  • plentymarkets_list_order_statuses

    The order statuses defined in the system (id and name per language), to translate a statusId. Optionally a range of status ids. GET /rest/orders/statuses.

  • plentymarkets_list_order_referrers

    The order referrers (sales channels: shop, eBay, Amazon, ...) with their ids, for the referrer_id filter of plentymarkets_list_orders. GET /rest/orders/referrers.

  • plentymarkets_list_comments

    The comments (internal notes) on an order, an order item, a contact or a category. GET /rest/comments/{referenceType}/{referenceValue}.

  • plentymarkets_list_items

    List items (the product containers) with filters. Prices, stock, barcodes and SKUs belong to the variations: use plentymarkets_list_variations for those. Returns {page, totalsCount, isLastPage, entries[]}. GET /rest/items.

  • plentymarkets_get_item

    Get one item by id: flags, manufacturer, texts, condition, age rating and the item-level settings. GET /rest/items/{itemId}.

  • plentymarkets_list_variations

    Search variations (the sellable products: number, SKU, barcodes, prices, stock, categories). Filter by item, number, barcode, SKU, active flag, category, warehouse. Use `with` for the related data (variationSalesPrices, variationBarcodes, stock, variationCategories, images ...).

  • plentymarkets_list_categories

    List item categories (the category tree: id, parent, level, type, names with `with` details). GET /rest/categories.

  • plentymarkets_list_manufacturers

    List the manufacturers (brands) of the items: id, name, address data. GET /rest/items/manufacturers.

  • plentymarkets_list_sales_prices

    List the sales price configurations (price types such as retail or purchase price: id, type, names, which stores, countries and currencies they apply to). The prices of a variation: plentymarkets_list_variations with variationSalesPrices. GET /rest/items/sales_prices.

  • plentymarkets_list_stock

    List physical stock per variation and warehouse (physical stock, net stock, reserved, reorder level), optionally for one variation or changed since a date. Returns {page, totalsCount, isLastPage, entries[]}. GET /rest/stockmanagement/stock.

  • plentymarkets_list_warehouses

    List the warehouses (id, name, type, priority, address settings). GET /rest/stockmanagement/warehouses.

  • plentymarkets_list_contacts

    List contacts (customers, suppliers, ...). Returns personal data of your customers (names, emails, addresses). Filter by email, name, number, type, postal code or town; `with` adds addresses, options (email, phone), accounts, orderSummary. GET /rest/accounts/contacts.

  • plentymarkets_get_contact

    Get one contact by id (customer personal data). Add addresses or accounts with `with` (the relations documented for this single-contact route). GET /rest/accounts/contacts/{contactId}.

  • plentymarkets_add_comment

    WRITE: add an internal comment to an order, order item, contact, category or variation (an additive note, nothing is overwritten). By default the comment is NOT visible to the customer; only make it visible when the user explicitly asks. POST /rest/comments.

  • plentymarkets_update_order_status

    WRITE: move an order to another status. This can trigger the event procedures configured in the system (customer emails, stock bookings, documents, shipping), so confirm the target status with the user first (plentymarkets_list_order_statuses has the ids). Only the status is sent

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    35ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    18件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

ネットショップ・決済のほかのサーバーとの比較i

  • このカテゴリのほかの1743件のうち0%よりスターが多い
  • このカテゴリのほかの1743件のうち95%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1743件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

PlentyONE MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.6.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Stripe MCP

作者:stripe

MCP server integrating with Stripe - tools for customers, products, payments, and more.

クラウドで動く★ 2,043MIT12 か月前更新
インストール

MCP Cn Commerce

作者:TonyWang-hub

8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending

パソコンで動く★ 96MIT27 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

PlentyONE MCP by usefulapi

Hosted at https://plentymarkets.usefulapi.io/mcp.

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://plentymarkets.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http plentymarkets https://plentymarkets.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "plentymarkets": { "url": "https://plentymarkets.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your PlentyONE credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/plentymarkets/

Use your plenty ID and the username and password of a dedicated back end user with REST API and order read access. The system needs Expand or higher. Grant only the resource permissions you want the assistant to have. Changing an order status can trigger configured customer emails, stock bookings and other event procedures.

Tools

ToolTypeWhat it does
plentymarkets_list_ordersreadList orders
plentymarkets_get_orderreadGet an order
plentymarkets_get_order_status_historyreadGet an order's status history
plentymarkets_list_order_statusesreadList order statuses
plentymarkets_list_order_referrersreadList order referrers
plentymarkets_list_commentsreadList comments
plentymarkets_list_itemsreadList items
plentymarkets_get_itemreadGet an item
plentymarkets_list_variationsreadList variations
plentymarkets_list_categoriesreadList categories
plentymarkets_list_manufacturersreadList manufacturers
plentymarkets_list_sales_pricesreadList sales price configurations
plentymarkets_list_stockreadList stock
plentymarkets_list_warehousesreadList warehouses
plentymarkets_list_contactsreadList contacts
plentymarkets_get_contactreadGet a contact
plentymarkets_add_commentwriteAdd a comment
plentymarkets_update_order_statuswriteChange an order's status
plentymarkets_usage_statusmetaUsage status (free-tier meter)
plentymarkets_request_featuremetaRequest a missing feature
plentymarkets_upgrademetaUpgrade to Pro or Pro+
plentymarkets_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per system and API user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with plentymarkets_upgrade (it returns a Stripe Checkout link). Cancel any time with plentymarkets_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running plentymarkets_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT

PopNxに聞く