プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

smsmode MCP by usefulapi

作者:m190バージョン 1.22.3i★ –iクラウドで動く
レジストリ名io.usefulapi/smsmode

インストール

概要

作者による説明(英語の原文)

Read smsmode balance, messages, replies, campaigns and usage; send SMS to up to 10 numbers.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: チャット・メール

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://smsmode.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http smsmode https://smsmode.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "smsmode": {
      "url": "https://smsmode.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "smsmode": {
      "type": "http",
      "url": "https://smsmode.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://smsmode.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • smsmode_get_balance

    The credit balance of the connected smsmode account (and sub-organisations an administrator key can see): amount and currency (negative = owed on a POST_PAY account), payment type (PRE_PAY / POST_PAY), state, monthly consumption and its limit. Good first call; check it before sen

  • smsmode_get_organisation

    Full details of one organisation: contacts, addresses, company information, balance, monthly limit and consumption. GET /commons/v1/organisations/{id}.

  • smsmode_list_channels

    List messaging channels (SMS or RCS; flow TRANSACTIONAL / MARKETING / OTP) with default sender, daily and monthly limits and consumption. A channel id is needed to scope messages or consumption to one channel. GET /commons/v1/channels.

  • smsmode_get_channel

    Details of one channel: type, flow, default sender ID and authorized sender IDs, limits and consumption. GET /commons/v1/channels/{id}.

  • smsmode_list_consumptions

    Sent-message counts and money spent per month or per day (price amount and currency), optionally for one channel. Default: monthly, the last 3 months. GET /commons/v1/consumptions.

  • smsmode_get_consumption

    One consumption record broken down by country (mcc) or network (mccMnc) with quantity and price per sub-item, optionally with delivery statuses. GET /commons/v1/consumptions/{id}.

  • smsmode_lookup_number

    Country and mobile network (mcc/mnc, operator) of a phone number. Only for customers with a premium smsmode subscription and, for now, only French numbers (403 otherwise). GET /commons/v1/lookup/{msisdn}.

  • smsmode_list_messages

    Messages with delivery status (SCHEDULED, ENROUTE, DELIVERED, UNDELIVERABLE, UNDELIVERED; status.detail names the cause), recipient, sender, text, parts and price. Default window: the last 10 days. Filter by direction (MT = sent, MO = replies received), recipient, your reference,

  • smsmode_get_message

    One message: delivery status and detail, delivery date, recipient network, text, parts and price. GET /sms/v1/messages/{id}.

  • smsmode_list_campaigns

    Existing SMS campaigns (grouped sends) with status SCHEDULED / ONGOING / ENDED, quantity, price and per-status delivery counts. Read only: this server does not send campaigns. GET /sms/v1/campaigns.

  • smsmode_get_campaign

    One campaign: state, period, recipients count, text, price and delivery counts per status. Use smsmode_list_messages with campaign_id for its individual messages. GET /sms/v1/campaigns/{id}.

  • smsmode_send_sms

    WRITE, SPENDS CREDIT: sends one SMS text to 1 to 10 recipients (one message each, a batch of unit messages) and texts REAL people immediately, or at send_at. Cost: every message is charged to the account at its destination's price per SMS part (GSM7: 160 characters for 1 part, 30

  • smsmode_cancel_scheduled_message

    WRITE: cancels ONE message that is still scheduled (status SCHEDULED, sent with send_at) so it is not sent; smsmode refuses messages already sent. Cannot be undone. DELETE /sms/v1/messages/{id}.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    17ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    13件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

チャット・メールのほかのサーバーとの比較i

  • このカテゴリのほかの1762件のうち0%よりスターが多い
  • このカテゴリのほかの1762件のうち96%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1762件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

smsmode MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.22.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Vexa, emailmd, MCP WhatsApp Cloud

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Vexa

作者:Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

クラウドで動く★ 2,949Apache-2.02 か月前更新
インストール

emailmd

作者:anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

パソコンでもクラウドでも★ 1,385MIT30 日前更新
インストール

MCP WhatsApp Cloud

作者:codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

パソコンで動く★ 277MIT5 か月前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

smsmode MCP by usefulapi

Use smsmode from Claude, Cursor, or any MCP client — balance, organisation, channels, consumption, number lookups, messages and campaigns, plus capped SMS sends and cancelling a scheduled message. Hosted, no local install: connect with your own smsmode credentials.

Live endpoint: https://smsmode.usefulapi.io/mcp · Homepage: https://usefulapi.io/smsmode

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://smsmode.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http smsmode https://smsmode.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "smsmode": { "url": "https://smsmode.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your smsmode credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/smsmode/

Tools

ToolTypeWhat it does
smsmode_get_balancereadGet the account balance
smsmode_get_organisationreadGet an organisation
smsmode_list_channelsreadList channels
smsmode_get_channelreadGet a channel
smsmode_list_consumptionsreadList consumption statistics
smsmode_get_consumptionreadGet a consumption with its breakdown
smsmode_lookup_numberreadLook up a phone number's network
smsmode_list_messagesreadList sent and received messages
smsmode_get_messagereadGet a message and its delivery status
smsmode_list_campaignsreadList SMS campaigns
smsmode_get_campaignreadGet an SMS campaign
smsmode_send_smswriteSend an SMS to 1-10 recipients
smsmode_cancel_scheduled_messagewriteCancel a scheduled message
smsmode_usage_statusmetaUsage status (free-tier meter)
smsmode_request_featuremetaRequest a missing feature
smsmode_upgrademetaUpgrade to Pro or Pro+
smsmode_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per organisation)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with smsmode_upgrade (it returns a Stripe Checkout link). Cancel any time with smsmode_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running smsmode_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by smsmode.

PopNxに聞く