Open-source B2B and marketplace ecommerce; new stores include an MCP server for AI agents.
Starshipit MCP by usefulapi
概要
作者による説明(英語の原文)
Read Starshipit orders, tracking, rates and manifests; create and update unshipped orders.
PopNx MCPの3つの柱
この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。
- 利用者の声iレビューはまだありませんレビューは今後のステップで、アカウント機能と一緒に始まります
- 私たちの基本チェックi3項目中3項目に合格公開情報からチェック。コードはまだスキャンしていません
- 利用状況i未計測★ –
できること
このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。
- 接続方法: クラウドで動く
- トランスポート: Streamable HTTP
- カテゴリ: ネットショップ・決済
インストール
使っているAIアプリを選んで、設定をコピーしてください。
インストールの前に
- 基本チェック:3項目中3項目に合格
- 作者のサーバーで動きます。あなたが頼んだ内容は、作者のサーバーを通ります。
- できること:19件(ツール) starshipit_list_unshipped_orders, starshipit_list_shipped_orders, starshipit_list_printed_orders, starshipit_list_delivered_orders …
- レジストリには、入力が必要なキーは載っていません。
必要なもの
- クラウドで動くインストール不要。インターネット経由でつながります
どのアプリを使っていますか?
上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。
ウェブ、デスクトップ、モバイルのClaudeで使えます:
- Settings → Connectors を開く
- Add custom connector を押す
- 下のアドレスを貼り付けて Add を押す
- サインインを求められたら、作者のサービスにサインインする
https://starshipit.usefulapi.io/mcpターミナルでこれを実行します
claude mcp add --transport http starshipit https://starshipit.usefulapi.io/mcpまたは、設定を自分でコピーする
プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます
{
"mcpServers": {
"starshipit": {
"url": "https://starshipit.usefulapi.io/mcp"
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
または、設定を自分でコピーする
プロジェクトの .vscode/mcp.json に貼り付けます
{
"servers": {
"starshipit": {
"type": "http",
"url": "https://starshipit.usefulapi.io/mcp"
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
ChatGPTがつなげるのは、インターネット上のサーバーだけです:
- ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
- Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
- 下のアドレスを貼り付け、名前を付けて保存する
- サインインを求められたら、作者のサービスにサインインする
https://starshipit.usefulapi.io/mcpメニューの名前は、プランや時期によって少し違うことがあります。
選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
できること
ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。
starshipit_list_unshipped_ordersList unshipped (new, not yet printed) orders with full details: addresses, items, packages, carrier. By default only orders updated in the last 24 hours; use since_order_date / since_last_updated to look further back. ids_only=true returns just the order ids. GET /api/orders/unsh
starshipit_list_shipped_ordersList shipped orders (label printed) with tracking number, tracking status, carrier, manifest and shipped date. By default only orders updated in the last 24 hours; use since_last_updated to look further back. Label files are not returned. GET /api/orders/shipped.
starshipit_list_printed_ordersList orders whose label was recently printed, or printed but not yet manifested, with tracking numbers. GET /api/orders/shipments.
starshipit_list_delivered_ordersList delivered orders that carry a given order reference (the customer reference), with full order details. GET /api/orders/delivered.
starshipit_orders_summaryA compact list of orders in one status (new, printed, shipped, archived) with contact, country, carrier, weight, manifest and dates, plus account-wide counts (unprinted, printed, shipped, archived, invalid addresses, returns). Supports filters and sorting. GET /api/orders/summary
starshipit_search_ordersSearch orders by order number, tracking number, customer reference or recipient name (phrase), optionally limited to unshipped or shipped orders. Returns id, number, date, name, carrier, tracking number and country. GET /api/orders/search.
starshipit_get_orderOne order by Starshipit order_id or by the order_number from the source platform. Use include to add sections (Items, Packages, Events, Metadatas, Shipping_Price, ...). Status defaults to Unshipped in Starshipit, so pass status=Shipped or Printed for orders already printed. Label
starshipit_list_ordersList full order details for one status (Unshipped by default, or Shipped / Printed), narrowed by a filter such as `Order:::1419,Country:::Australia` and sorted. Heavier than the summary: use starshipit_orders_summary for overviews. Label files are not returned. GET /api/orders (n
starshipit_track_shipmentTracking details for a shipped order, by tracking number or by order number: status, carrier, tracking URL, shipment date and the carrier's tracking events. GET /api/track.
starshipit_get_ratesQUOTE ONLY: shipping rates (service name, code, price) for a destination and parcels from the couriers enabled in the account. Nothing is purchased, created or printed. The sender defaults to the account's pickup address. Needs at least one enabled courier. POST /api/rates.
starshipit_list_delivery_servicesQUOTE ONLY: the carrier delivery services available for a shipment (carrier, service name and code) and, with include_pricing, their prices and service options. Nothing is purchased, created or printed. POST /api/deliveryservices.
starshipit_list_address_bookList contacts in the account's address book (name, company, address, phone, email), sorted by a column. GET /api/addressbook/filtered.
starshipit_list_manifestsList manifests already submitted to carriers (newest first): number, date, carrier, package and consignment counts. Read only; manifesting is not available here. GET /api/manifests.
starshipit_list_productsList Product Catalogue records (SKU, title, weight, dimensions, HS code, bin location, price), optionally searching by SKU or title. GET /api/products.
starshipit_list_tagsList the account's user-defined order tags, optionally filtered by tag name. GET /api/tags.
starshipit_list_pickupsList courier pickups already booked for the account. Read only; booking a pickup is not available here. GET /api/pickup.
starshipit_create_orderWRITE: create ONE new UNSHIPPED order in Starshipit (order number, destination, optional items, parcels, sender). No label is printed, no shipment is booked and no postage is bought; staff still print the label in Starshipit. Not idempotent: creating the same order_number twice m
starshipit_update_orderWRITE: change details of ONE UNSHIPPED order by order_id (the order is read first and refused if it is already printed or shipped): addresses, shipping method/carrier/service, items, packages, reference or an internal note. This tool never sends status or manifest flags. It does
starshipit_add_order_tagsWRITE: add up to 10 tags to ONE UNSHIPPED order (read first; refused if printed or shipped) (a tag that does not exist yet is created). Tags are used for filtering and can drive the account's automation rules. Adding a tag the order already has changes nothing. Tags are not remov
基本チェックi
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック
- ✓ 合格
作者とリポジトリが一致
レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)
- … 未チェック
今もメンテナンスされている
このリポジトリはまだGitHubから読み取っていません
- … 未チェック
ライセンスがある
このリポジトリはまだGitHubから読み取っていません
- ✓ 合格
エンドポイントが応答する
11ミリ秒で応答(HTTP 200)
- – 対象外
OAuthでサインイン
サインイン不要
- ✓ 合格
ツールの説明に隠れた指示がない
19件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした
ネットショップ・決済のほかのサーバーとの比較i
- このカテゴリのほかの1748件のうち0%よりスターが多い
- このカテゴリのほかの1748件のうち94%より最近レジストリに公開
- 基本チェックの結果が、このカテゴリのほかの1748件のうち100%と同じかそれ以上
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
よくある質問
Starshipit MCP by usefulapiは安全ですか?
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
どんなキーやコードが必要ですか?
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
パソコンで動きますか、それともクラウドですか?
作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。
今もメンテナンスされていますか?
GitHubリポジトリの最終更新は–、最新バージョン(1.22.4)がレジストリに届いたのは今日です。
どのアプリで使えますか?
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。
代わりに使えるものは?
同じカテゴリには:Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce
代わりの候補
同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。
カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Stripe MCP
MCP server integrating with Stripe - tools for customers, products, payments, and more.
MCP Cn Commerce
8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending
作者のREADME
READMEを開く
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
Starshipit MCP by usefulapi
Use Starshipit from Claude, Cursor, or any MCP client — unshipped, printed and shipped orders, tracking, rate quotes and manifests, plus unshipped order edits. Hosted, no local install: connect with your own Starshipit credentials.
Live endpoint: https://starshipit.usefulapi.io/mcp · Homepage: https://usefulapi.io/starshipit
Connect
- Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste
https://starshipit.usefulapi.io/mcp. - Claude Code:
claude mcp add --transport http starshipit https://starshipit.usefulapi.io/mcp, then run/mcpto log in. - VS Code: Add to VS Code.
- Cursor and other clients: add the URL as a remote MCP server:
{
"mcpServers": { "starshipit": { "url": "https://starshipit.usefulapi.io/mcp" } } }
Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Starshipit credentials.
Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/starshipit/
Tools
| Tool | Type | What it does |
|---|---|---|
starshipit_list_unshipped_orders | read | List unshipped orders |
starshipit_list_shipped_orders | read | List shipped orders |
starshipit_list_printed_orders | read | List printed or unmanifested orders |
starshipit_list_delivered_orders | read | List delivered orders by reference |
starshipit_orders_summary | read | Orders summary by status |
starshipit_search_orders | read | Search orders |
starshipit_get_order | read | Get one order |
starshipit_list_orders | read | List orders with filters |
starshipit_track_shipment | read | Track a shipment |
starshipit_get_rates | read | Quote shipping rates |
starshipit_list_delivery_services | read | List delivery services |
starshipit_list_address_book | read | List address book |
starshipit_list_manifests | read | List manifests |
starshipit_list_products | read | List product catalogue |
starshipit_list_tags | read | List order tags |
starshipit_list_pickups | read | List booked pickups |
starshipit_create_order | write | Create an unshipped order |
starshipit_update_order | write | Update an order's details |
starshipit_add_order_tags | write | Add tags to an order |
starshipit_usage_status | meta | Usage status (free-tier meter) |
starshipit_request_feature | meta | Request a missing feature |
starshipit_upgrade | meta | Upgrade to Pro or Pro+ |
starshipit_cancel_subscription | meta | Cancel the Pro subscription |
read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.
Pricing
| Plan | Price | Limit |
|---|---|---|
| Free | $0 | 50 tool calls / month |
| Pro (per account) | $9/mo or $90/yr (2 months free) | Unlimited* |
\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.
Pro covers this server only. Subscribe with starshipit_upgrade (it returns a Stripe Checkout link). Cancel any time with starshipit_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running starshipit_upgrade before then undoes the cancel. Or write to support@usefulapi.io.
License
MIT © usefulapi. Not affiliated with or endorsed by Starshipit.