プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Track-POD MCP by usefulapi

作者:m190バージョン 1.26.3i★ –iクラウドで動く
レジストリ名io.usefulapi/track-pod

インストール

概要

作者による説明(英語の原文)

Read Track-POD orders, routes, drivers, vehicles and proof of delivery; create orders.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: ネットショップ・決済

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://track-pod.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http track-pod https://track-pod.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "track-pod": {
      "url": "https://track-pod.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "track-pod": {
      "type": "http",
      "url": "https://track-pod.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://track-pod.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • trackpod_list_orders

    List the orders of one day — by order date (GET /Order/Date/{date}) or by planned route date (GET /Order/Route/Date/{date}) — with optional filters on delivery status, driver and route number. Track-POD returns the whole day at once; this tool pages it (offset/limit) and reports

  • trackpod_list_orders_changed_since

    List orders whose delivery status changed after a moment in the last 24 hours (GET /Order/Status/Date/{date-time}; Track-POD accepts no earlier time than UTC now − 1 day). Good for 'what was delivered / failed since this morning'. Paged here (offset/limit).

  • trackpod_list_route_orders

    List the orders on one route, in route order, by route code (GET /Order/Route/Code/{code}). Paged here (offset/limit).

  • trackpod_get_order

    Get one order with every field: client, address, time slot, goods lines, route, driver, delivery status, ETA, signature/photo links and tracking link. Pass exactly one of number, order_id or track_id (GET /Order/Number|Id|TrackId/{…}). A removed order answers with who removed it

  • trackpod_find_orders_by_number

    List the last 25 orders that share one order number (re-deliveries, repeated jobs) — GET /Order/Number/{number}/List. Use it when an order number was reused and trackpod_get_order returns only one of them.

  • trackpod_get_proof_of_delivery

    Get the electronic proof of delivery (ePOD) of one order: status and status time/GPS, who signed, signature and photo links (valid 24 h), driver comment, reject reasons, delivered vs ordered goods quantities, cash collected, customer feedback and the PDF delivery-note link (Repor

  • trackpod_list_reject_reasons

    List the account's reasons for not delivering / not collecting: site, order, goods and scanning issues (GET /RejectReason).

  • trackpod_list_routes

    List the routes of one day (GET /Route/Date/{date}): code, status (Draft, Ready, Loaded, InProgress, Closed), driver, vehicle, planned vs actual start/finish, distance, cost, current GPS position, and per-route order counts by status. Paged here (offset/limit).

  • trackpod_get_route

    Get one route with its status, driver, vehicle, timings, distance, cost, current GPS position and its orders. Pass exactly one of route_code or route_id (GET /Route/Code|Id/{…}).

  • trackpod_get_route_track

    Get the driver's recorded GPS track of a route (latitude, longitude, speed in m/s, time) — GET /Route/Track/Code|Id/{…}. Pass exactly one of route_code or route_id. Points are paged here (offset/limit, max 1000 per call).

  • trackpod_list_drivers

    List the account's drivers: name, username, phone, vehicle, depot, zone, teams and active flag (GET /Driver). Paged here.

  • trackpod_get_driver

    Get one driver by Track-POD id (UUID) or by username (GET /Driver/Id/{id} or /Driver/Username/{username}). Pass exactly one.

  • trackpod_list_vehicles

    List the account's vehicles: plate number, assigned driver, depot, capacity (weight/volume/pallets/size), limits, costs, type and carrier (GET /Vehicle, optional plate-number filter). Paged here.

  • trackpod_get_vehicle

    Get one vehicle by its Track-POD id (an integer, from trackpod_list_vehicles) — GET /Vehicle/{id}.

  • trackpod_list_vehicle_checks

    Driver vehicle inspections (before/after route): checklist items with pass/fail, notes, photo links (valid 24 h), odometer and signature. date only: every check of that day (GET /VehicleCheck/Date/{date}); date + vehicle_number: that vehicle's checks of the day; vehicle_number on

  • trackpod_create_order

    Create ONE REAL unscheduled order in Track-POD (POST /Order): a delivery or a collection for a client at an address, ready to be planned into a route by a dispatcher. It does not create or optimise routes. Depending on the account's notification settings the customer may later re

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    35ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    16件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

ネットショップ・決済のほかのサーバーとの比較i

  • このカテゴリのほかの1742件のうち0%よりスターが多い
  • このカテゴリのほかの1742件のうち93%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1742件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Track-POD MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.26.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Stripe MCP

作者:stripe

MCP server integrating with Stripe - tools for customers, products, payments, and more.

クラウドで動く★ 2,043MIT12 か月前更新
インストール

MCP Cn Commerce

作者:TonyWang-hub

8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending

パソコンで動く★ 96MIT27 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Track-POD MCP by usefulapi

Use Track-POD from Claude, Cursor, or any MCP client — read Track-POD orders, routes, drivers, vehicles and proof of delivery; create orders. Hosted, no local install: connect with your own Track-POD credentials.

Live endpoint: https://track-pod.usefulapi.io/mcp · Homepage: https://usefulapi.io/track-pod

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://track-pod.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http track-pod https://track-pod.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "track-pod": { "url": "https://track-pod.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Track-POD credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/track-pod/

On first connect you'll provide your Track-POD API key. Your credentials are validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
trackpod_list_ordersreadList orders for a day
trackpod_list_orders_changed_sincereadList orders with a recent status change
trackpod_list_route_ordersreadList the orders of a route
trackpod_get_orderreadGet an order
trackpod_find_orders_by_numberreadFind orders by number
trackpod_get_proof_of_deliveryreadGet proof of delivery
trackpod_list_reject_reasonsreadList reject reasons
trackpod_list_routesreadList routes for a day
trackpod_get_routereadGet a route
trackpod_get_route_trackreadGet a route's GPS track
trackpod_list_driversreadList drivers
trackpod_get_driverreadGet a driver
trackpod_list_vehiclesreadList vehicles
trackpod_get_vehiclereadGet a vehicle
trackpod_list_vehicle_checksreadList vehicle checks
trackpod_create_orderwriteCreate an order
trackpod_usage_statusmetaUsage status (free-tier meter)
trackpod_request_featuremetaRequest a missing feature
trackpod_upgrademetaUpgrade to Pro or Pro+
trackpod_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with trackpod_upgrade (it returns a Stripe Checkout link). Cancel any time with trackpod_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running trackpod_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Track-POD.

PopNxに聞く