プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

WaiverFile MCP by usefulapi

作者:m190バージョン 1.14.3i★ –iクラウドで動く
レジストリ名io.usefulapi/waiverfile

インストール

概要

作者による説明(英語の原文)

Read WaiverFile waivers, events, forms and SMS opt-ins; create and update events, invite managers.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: チャット・メール

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://waiverfile.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http waiverfile https://waiverfile.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "waiverfile": {
      "url": "https://waiverfile.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "waiverfile": {
      "type": "http",
      "url": "https://waiverfile.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://waiverfile.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • waiverfile_get_site

    Details of the WaiverFile site (WaiverSite) this API key belongs to: name, settings and plan information as WaiverFile reports them. GET /GetSiteDetails.

  • waiverfile_list_waiver_forms

    List the waiver forms of the site (name, id, which fields they collect: email, address, phone, date of birth, minimum age, signature). Active forms by default; set include_deleted for all forms including deleted ones. Use the form ids when creating or updating events. GET /GetAct

  • waiverfile_list_events

    List waiver events (a class, tour, party or session that collects waivers) whose date falls in a range, optionally only one event category. Each event has an id, name, start/end, headcount and spots remaining. Dates are UTC. GET /GetEventsByDateRange or /GetEventsByCategory.

  • waiverfile_list_upcoming_events

    List upcoming waiver events between two dates (UTC), for example the next 7 days. GET /GetUpcomingEvents.

  • waiverfile_list_event_categories

    List the event categories of the site (id and name). Use the ids to filter events or to put a new event in a category. GET /GetEventCategories.

  • waiverfile_get_event_waivers

    The waivers collected for one event: who signed, when, and the participants. Personal data of signers. GET /GetWaiversForEvent.

  • waiverfile_search_waivers

    Search signed waivers by free-text terms (a signer's name, email or phone). Personal data of signers. GET /SearchWaivers.

  • waiverfile_get_waiver

    One signed waiver by id: signer, date signed, participants, collected form data, event and the agreement text. Set lite for only the collected form data (no agreement text or event info). Signature and image bytes are never returned. GET /GetWaiver or /GetWaiverLite.

  • waiverfile_find_waivers_by_reference

    Find waivers by the reference ids an outside booking or reservation system attached to them (referenceID1, 2, 3). Give at least one of reference_id_1/2/3, or reference_id_any to match all three fields. GET /GetWaiversByReferenceID.

  • waiverfile_list_waivers

    A page of the waivers signed in a date range. Set lite for only the collected form data (smaller). For a flat export with custom form columns use waiverfile_export_waiver_data; for totals use waiverfile_count_waivers. Personal data of signers. GET /GetAllWaiversByDateRange or /Ge

  • waiverfile_export_waiver_data

    A page of flat waiver rows for a date range (the data behind the WaiverFile export): standard fields, optionally every custom form field as a column, and participants either as one comma-separated column or one row each. Personal data of signers. GET /GetWaiverData.

  • waiverfile_count_waivers

    How many waivers a date range holds: record_count (GetWaiverDataCount, the rows waiverfile_export_waiver_data pages through) and waiver_count (GetAllWaiversByDateRangePageCount, which WaiverFile documents as the number of waivers in the range, used to work out the pages of waiver

  • waiverfile_list_sms_subscribers

    SMS marketing subscribers (phone numbers) that opted in during a date range, or with opted_out set the ones that opted out. Dates are UTC. Personal data. GET /GetSubscribersByDate or /GetOptedOutSubscribersByOptOutDate.

  • waiverfile_create_event

    Create a waiver event (a class, tour or session that collects waivers) with a name and a start/end time (UTC). Optionally an all-day flag, category, location, signing cut-off, participant limit and which waiver forms to attach (default: WaiverFile's own choice, see list_waiver_fo

  • waiverfile_update_event

    Update an existing event. WaiverFile replaces the whole event, so name, start, end and all_day are required and anything left out is reset: category_id empty = no category, waiver_form_ids empty = ALL active forms are attached. Read the event first (waiverfile_list_events) and se

  • waiverfile_invite_event_managers

    SENDS EMAIL: invites people (by email address) to manage one event; they can log in to WaiverFile and see its signers and participants, with the fields set in the account settings. WaiverFile emails each address, with your optional message in the body (skip_email_if_account_exist

  • waiverfile_create_event_category

    Create an event category (a label to group events). Not idempotent: calling twice with the same name creates two categories. POST /InsertEventCategory.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    163ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    17件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

チャット・メールのほかのサーバーとの比較i

  • このカテゴリのほかの1766件のうち0%よりスターが多い
  • このカテゴリのほかの1766件のうち95%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1766件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

WaiverFile MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.14.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Vexa, emailmd, MCP WhatsApp Cloud

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Vexa

作者:Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

クラウドで動く★ 2,949Apache-2.02 か月前更新
インストール

emailmd

作者:anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

パソコンでもクラウドでも★ 1,385MIT31 日前更新
インストール

MCP WhatsApp Cloud

作者:codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

パソコンで動く★ 277MIT5 か月前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

WaiverFile MCP by usefulapi

Read WaiverFile waivers, events, forms and SMS opt-ins; create and update events, invite managers.

Live endpoint: https://waiverfile.usefulapi.io/mcp · Homepage: https://usefulapi.io/waiverfile

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://waiverfile.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http waiverfile https://waiverfile.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "waiverfile": { "url": "https://waiverfile.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your WaiverFile credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/waiverfile/

On first connect you'll paste your WaiverFile API key and Site ID (WaiverFile → Settings → API → API keys; click Show to reveal the key, the Site ID is shown below it).

Tools

ToolTypeWhat it does
waiverfile_get_sitereadGet site details
waiverfile_list_waiver_formsreadList waiver forms
waiverfile_list_eventsreadList events by date range
waiverfile_list_upcoming_eventsreadList upcoming events
waiverfile_list_event_categoriesreadList event categories
waiverfile_get_event_waiversreadGet waivers for an event
waiverfile_search_waiversreadSearch waivers
waiverfile_get_waiverreadGet a waiver
waiverfile_find_waivers_by_referencereadFind waivers by reference id
waiverfile_list_waiversreadList waivers by date range
waiverfile_export_waiver_datareadExport waiver data
waiverfile_count_waiversreadCount waivers in a date range
waiverfile_list_sms_subscribersreadList SMS subscribers
waiverfile_create_eventwriteCreate an event
waiverfile_update_eventwriteUpdate an event
waiverfile_invite_event_managerswriteInvite event managers
waiverfile_create_event_categorywriteCreate an event category
waiverfile_usage_statusmetaUsage status (free-tier meter)
waiverfile_request_featuremetaRequest a missing feature
waiverfile_upgrademetaUpgrade to Pro or Pro+
waiverfile_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with waiverfile_upgrade (it returns a Stripe Checkout link). Cancel any time with waiverfile_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running waiverfile_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by WaiverFile.

PopNxに聞く