プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Vetagent

作者:jakegu1バージョン 0.2.0i★ –iクラウドで動く
レジストリ名dev.vetagent/vetagent

インストール

概要

作者による説明(英語の原文)

Pre-trade safety check for AI agents: honeypot, tax, liquidity and rug risk before you buy.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: 会計・財務・税務

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック:1項目中1項目に合格
  • 作者のサーバーで動きます。あなたが頼んだ内容は、作者のサーバーを通ります。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://vetagent.dev/mcp

ターミナルでこれを実行します

claude mcp add --transport http vetagent https://vetagent.dev/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "vetagent": {
      "url": "https://vetagent.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "vetagent": {
      "type": "http",
      "url": "https://vetagent.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://vetagent.dev/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

このサーバーのツール一覧はまだ読み取っていません。エンドポイントは順番にチェックしています。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン vetagent.dev で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    エンドポイントが応答する

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    OAuthでサインイン

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    ツールの説明に隠れた指示がない

    まだチェックしていません。エンドポイントをチェックするときにツール一覧を読み取ります

会計・財務・税務のほかのサーバーとの比較i

  • このカテゴリのほかの1720件のうち0%よりスターが多い
  • このカテゴリのほかの1720件のうち39%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1720件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Vetagentは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.2.0)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Finance Toolkit, SolidInvoice, Korea Tax Calculator

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Finance Toolkit

作者:JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

パソコンでもクラウドでも★ 5,496MIT昨日更新
インストール

SolidInvoice

作者:SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

クラウドで動く★ 981MIT7 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

VetAgent

A pre-trade safety check for AI agents. Before an agent buys, holds, or recommends a token, it calls VetAgent and gets an actionable verdict — low / medium / high / unknown — plus the specific signals behind it, instead of a wall of numbers to interpret.

Remote MCP endpoint: `https://vetagent.dev/mcp` · Landing page: https://vetagent.dev Using it, or think it got a token wrong? hello@vetagent.dev — or open an issue.

// assess_token_risk("0x…", chain_hint="ethereum")

{ "risk_level": "medium", "risk_score": 36, "confidence": "high", "signals": [ {"severity": "ok", "name": "Liquidity is adequate", "category": "liquidity"}, {"severity": "ok", "name": "Buys and sells normally", "category": "honeypot"}, {"severity": "warn", "name": "Contract is closed source", "category": "contract"} ], "recommendation": "Medium risk. Real signals fired but none are fatal. Review liquidity, holder distribution and contract permissions before deciding." }


Install

Nothing to install. It is a remote server: no package, no container, no API key, no signup. Add one URL.

Claude Code:

claude mcp add --transport http vetagent https://vetagent.dev/mcp

Cline, Cursor, Claude Desktop, or any other MCP client — add to the MCP config:

{

"mcpServers": { "vetagent": { "type": "http", "url": "https://vetagent.dev/mcp" } } }

Confirm it worked — three tools should come back:

curl -s -X POST https://vetagent.dev/mcp \

-H 'Content-Type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list"}'

Not using MCP? The same engine answers over plain HTTP: GET https://vetagent.dev/assess/

See llms-install.md for the version written for an agent doing the installing, and docs/AGENT-INTEGRATION.md for how to use the output once connected.


unknown is not low

This is the single most important thing to know about the output.

VetAgent is fail-closed. When a check cannot run — an upstream is down, a buy/sell simulation fails, no liquidity data comes back — it returns unknown and lists exactly what was missing in evidence.data_gaps. It never substitutes an optimistic middle value, and it never sizes a position for you.

confidence measures how complete the input data was, not how safe the token is.

A risk tool that honestly says "I don't know" is useful. One that guesses is not.


Tools

ToolWhat it does
assess_token_risk(address, chain_hint?, verbose?)Full risk profile: liquidity depth, pair age and same-ticker impersonation on all eight chains; sellability simulation, taxes, contract permissions and upstream aggregate verdicts on Ethereum, BSC and Base; mint/freeze authority and Token-2022 extensions on Solana. No holder concentration on any chain yet
get_token_liquidity(address, chain_hint?)Liquidity snapshot for the primary pair, with an explicit status so "upstream failed" is distinguishable from "no pools exist"
find_new_hot_pools(chain?, limit?)Newest / hottest pools on a chain. Discovery only — not a safety endorsement

Pass chain_hint whenever you know it. Ethereum forks such as PulseChain inherit contract addresses, so the same address exists on multiple chains with wildly different prices; the hint removes that ambiguity. (Without it, VetAgent prefers canonical chains — see _CHAIN_RANK in src/risk.py.)

Full agent-facing contract: docs/AGENT-INTEGRATION.md.


Accuracy benchmark

Most token-risk tools publish a feature list. We publish our error rates and the method behind them — including the parts that do not work yet — against labels produced by data sources the engine does not read.

What is measured today: a 1.9% false positive rate on 162 healthy tokens, a 13.0% false-block rate (20 of 154 liquid healthy tokens rated medium or high, which an agent will also refuse), a 20.7% unknown rate, and 21.2% of GoPlus-tagged centralised tokens rated high -- almost all abandoned pools holding cents, not USDT, which is rated low.

What is not measured yet: recall you could rely on. Sampling has turned up 30 dead tokens in 576, because every public source ranks by liquidity and rugged pools fall off the listing entirely, and the adversarial cohort is 17 contracts. Recall on those two small cohorts is published in bench/results.md beside a contract-signals-only column, because most of what they catch is an empty pool rather than a hostile contract. A population-level detection rate waits until the daily snapshot archive matures enough to supply a real cohort. An earlier version of this section claimed "measured recall", which the benchmark file itself contradicted.

→ [`bench/results.md`](bench/results.md) — current numbers, method, and known limits.

Why it is built this way:

  • Independent labels. If the benchmark labelled tokens using honeypot.is — which the engine reads — it would only measure whether VetAgent can relay honeypot.is. Labels come from realized market outcome (price/volume history) and from GoPlus, which is deliberately held out of the engine.
  • A runtime assertion, not a promise. The benchmark records every endpoint each side touched and fails the run if the two sets intersect. A circular benchmark is worse than none, so it is made structurally impossible rather than documented.
  • An ablation column. A token that already collapsed has ~zero liquidity today, so flagging it is close to tautological. Results are therefore reported twice: with all signals, and with only contract signals kept (liquidity, lifecycle, pool-age and impersonation signals removed). The gap is what the engine actually contributes beyond the obvious.
  • `unknown` rate reported alongside recall. A tool that answers unknown to everything has perfect recall and zero value.

The benchmark uses the pinned logical clock 2026-09-21T02:00:00Z. Use an isolated working copy and a matching local cache for reproduction:

python bench/run_benchmark.py --replay

Replay makes no network requests. A missing answer returns exit 4, lists missing URLs, and leaves existing result files unchanged. A complete replay can write bench/results.json and bench/results.md. The cache is not tracked or published with this repository; a fresh clone is not guaranteed to reproduce the published figures.

Plain run mode can fetch missing answers and write dated cache entries. An intentional refresh uses python bench/run_benchmark.py --fill missing-urls.txt with a reviewed explicit HTTPS URL list; it deduplicates the list and skips usable recorded entries. Run a separate --replay afterwards. A pinned logical clock is not a historical measurement of upstream state: new answers can change the results.


Tests

python tests/test_risk.py               # engine regressions, offline, real upstream snapshots

python tests/test_mcp.py # MCP protocol conformance python tests/test_upstream_contract.py # live: every path risk.py reads, against a measured baseline

Every case in tests/ is pinned to a defect that actually reached production.

The contract test earns its keep: VetAgent's worst bug was reading simulationResult.isHoneypot when honeypot.is puts that flag in honeypotResult. The key did not exist, the lookup returned None, it was read as False, and the honeypot check silently passed every token it was ever asked about. No mocked test could have caught that — only one that calls the real API and asserts the shape.

Rule for this repo: a commit that claims to fix something ships with a test that was red before it.


Architecture

Cloudflare Python Worker, no heavy dependencies.

src/

entry.py HTTP routing (entry class must be named Default) risk.py risk engine — assess / liquidity / new_pools mcp_server.py hand-written streamable-http MCP endpoint (JSON-RPC 2.0) landing.html landing page bench/ accuracy benchmark (independent labels + ablation) tests/ regression, protocol, and upstream-contract suites docs/ agent integration guide, handoff, MCP registry manifest

The MCP endpoint is hand-written rather than using the official mcp package: that package pulls in pydantic's C extensions, which do not install on Cloudflare Python Workers. Plain JSON-RPC turned out to be smaller and fully client-compatible.

Data sources

SourceUsed for
DexScreenerpairs, price, liquidity, volume, pair age
GeckoTerminalliquidity fallback, new/trending pools
honeypot.isbuy/sell simulation, taxes, aggregate risk, contract openness -- Ethereum, BSC and Base only
RugCheckSolana rug score, mint/freeze authority, Token-2022 extensions. No holder concentration: the report has carried no holders since 2026-09-19

GoPlus is not used by the engine — it is reserved as the benchmark's held-out oracle. Adding it to the engine requires giving the benchmark a new independent labeller first, or the accuracy numbers stop meaning anything.

Where things are written down

Four documents, one job each. If something is in two of them, one of them is wrong.

DocumentAnswers
README.md (this file)What is this, how do I call it
docs/DECISIONS.mdWhy is it built this way, and what enforces each rule
docs/STRATEGY.mdWho pays, what the moat is, when to shut it down

Why a change was made lives in the commit message, which is immutable and attached to the diff. Why a line of code looks odd lives in a comment next to that line. Neither gets copied into a document, because a copy rots without anyone noticing.

Scope

VetAgent reports observable on-chain risk. It is not financial advice, it does not size positions, and it cannot see off-chain risk — team behaviour, social engineering, or a rug executed through governance. Treat low as "no fatal signal found in the checks that ran", never as "safe to buy".

License

MIT — see LICENSE.

PopNxに聞く