プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Apple Books

作者:vgnshiyerバージョン 0.9.0i★ 64iパソコンで動く公式サイト ↗
レジストリ名io.github.vgnshiyer/apple-books-mcp

インストール方法

What it does

Access your Apple Books library, annotations, reading progress, and highlights through Claude

  • Connects パソコンで動く
  • Account or key No key needed
  • Category ゲーム・スポーツ・料理・学習

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気22/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ12/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア34/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

ひとことで AI にインストールしてもらう

Apple Books をインストールして。https://mcp.popnx.com/i/vgnshiyer-apple-books-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。

パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る

チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

  1. 提供元のインストールファイルをダウンロード

    作者の .mcpb ファイルをダウンロード

    .mcpb ファイルは提供元から直接のもので、当サイトは変更していません

  2. ファイルをダブルクリックし、パソコン版 Claude アプリで Install を押す

  3. 試してみる

    Apple Books を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Apple Books を使っていると言うか、回答に Apple Books のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • APPLE_BOOKS_MCP_ENABLE_WRITES コレクション書き込みツール(コレクションの作成・名前変更・削除、書籍の追加・削除)を許可します。Books が開いている間は書き込みを拒否し、事前にバックアップを取ります。
    英語の原文を見るAllow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 初期値 false
  • APPLE_BOOKS_DATA_DIR Apple Books のストア(BKLibrary と AEAnnotation)を保存するフォルダー。/Library/Containers/com.apple.iBooksX/Data/Documents 以外の場合に指定
    英語の原文を見るFolder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 同時に実行できるツール呼び出しの数(既定値は 8。0 の場合はイベントループ上で一つずつ実行)
    英語の原文を見るHow many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 初期値 8
  • APPLE_BOOKS_QUERY_TIMEOUT ライブラリクエリが停止されるまでに実行できる秒数(デフォルト 30、0 で無制限)。
    英語の原文を見るSeconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 初期値 30

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Apple Books につなげません

Apple Books はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Apple Books につなげるアプリを使う

  • キー不要、インストール不要 · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)

B · ゲーム・スポーツ・料理・学習 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude Code に MCP server Apple Books を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user apple-books -- uvx apple-books-mcp 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Apple Books のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  3. このコマンドを貼り付けて Enter

    claude mcp add --scope user apple-books -- uvx apple-books-mcp
  4. Claude Code で /mcp と入力

    Apple Books が一覧にあり、接続済みと表示されれば OK です

  5. 試してみる

    Apple Books を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Apple Books を使っていると言うか、回答に Apple Books のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • APPLE_BOOKS_MCP_ENABLE_WRITES コレクション書き込みツール(コレクションの作成・名前変更・削除、書籍の追加・削除)を許可します。Books が開いている間は書き込みを拒否し、事前にバックアップを取ります。
    英語の原文を見るAllow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 初期値 false
  • APPLE_BOOKS_DATA_DIR Apple Books のストア(BKLibrary と AEAnnotation)を保存するフォルダー。/Library/Containers/com.apple.iBooksX/Data/Documents 以外の場合に指定
    英語の原文を見るFolder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 同時に実行できるツール呼び出しの数(既定値は 8。0 の場合はイベントループ上で一つずつ実行)
    英語の原文を見るHow many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 初期値 8
  • APPLE_BOOKS_QUERY_TIMEOUT ライブラリクエリが停止されるまでに実行できる秒数(デフォルト 30、0 で無制限)。
    英語の原文を見るSeconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 初期値 30

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Cursor に MCP server Apple Books を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "apple-books": { "command": "uvx", "args": [ "apple-books-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Apple Books のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで Cursor を開く

    Cursor で開く

    Cursor がインストールの確認をするので Install を押します

  3. Cursor の AI チャットを Agent モードで開く

  4. 試してみる

    Apple Books を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Apple Books を使っていると言うか、回答に Apple Books のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • APPLE_BOOKS_MCP_ENABLE_WRITES コレクション書き込みツール(コレクションの作成・名前変更・削除、書籍の追加・削除)を許可します。Books が開いている間は書き込みを拒否し、事前にバックアップを取ります。
    英語の原文を見るAllow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 初期値 false
  • APPLE_BOOKS_DATA_DIR Apple Books のストア(BKLibrary と AEAnnotation)を保存するフォルダー。/Library/Containers/com.apple.iBooksX/Data/Documents 以外の場合に指定
    英語の原文を見るFolder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 同時に実行できるツール呼び出しの数(既定値は 8。0 の場合はイベントループ上で一つずつ実行)
    英語の原文を見るHow many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 初期値 8
  • APPLE_BOOKS_QUERY_TIMEOUT ライブラリクエリが停止されるまでに実行できる秒数(デフォルト 30、0 で無制限)。
    英語の原文を見るSeconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 初期値 30

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの VS Code に MCP server Apple Books を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "apple-books": { "type": "stdio", "command": "uvx", "args": [ "apple-books-mcp" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Apple Books のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで VS Code を開く

    VS Code で開く

    VS Code がインストールの確認をするので Install を押します

  3. VS Code の AI チャットを Agent モードで開く

  4. 試してみる

    Apple Books を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Apple Books を使っていると言うか、回答に Apple Books のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • APPLE_BOOKS_MCP_ENABLE_WRITES コレクション書き込みツール(コレクションの作成・名前変更・削除、書籍の追加・削除)を許可します。Books が開いている間は書き込みを拒否し、事前にバックアップを取ります。
    英語の原文を見るAllow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 初期値 false
  • APPLE_BOOKS_DATA_DIR Apple Books のストア(BKLibrary と AEAnnotation)を保存するフォルダー。/Library/Containers/com.apple.iBooksX/Data/Documents 以外の場合に指定
    英語の原文を見るFolder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 同時に実行できるツール呼び出しの数(既定値は 8。0 の場合はイベントループ上で一つずつ実行)
    英語の原文を見るHow many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 初期値 8
  • APPLE_BOOKS_QUERY_TIMEOUT ライブラリクエリが停止されるまでに実行できる秒数(デフォルト 30、0 で無制限)。
    英語の原文を見るSeconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 初期値 30

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Apple Books を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

claude mcp add --scope user apple-books -- uvx apple-books-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "apple-books": {
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "apple-books": {
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "apple-books": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

自分で入力する値

  • APPLE_BOOKS_MCP_ENABLE_WRITES env
    コレクション書き込みツール(コレクションの作成・名前変更・削除、書籍の追加・削除)を許可します。Books が開いている間は書き込みを拒否し、事前にバックアップを取ります。
    英語の原文を見るAllow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
  • APPLE_BOOKS_DATA_DIR env
    Apple Books のストア(BKLibrary と AEAnnotation)を保存するフォルダー。/Library/Containers/com.apple.iBooksX/Data/Documents 以外の場合に指定
    英語の原文を見るFolder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS env
    同時に実行できるツール呼び出しの数(既定値は 8。0 の場合はイベントループ上で一つずつ実行)
    英語の原文を見るHow many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
  • APPLE_BOOKS_QUERY_TIMEOUT env
    ライブラリクエリが停止されるまでに実行できる秒数(デフォルト 30、0 で無制限)。
    英語の原文を見るSeconds a library query may run before it is stopped (default 30; 0 for no limit).

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

週あたりのダウンロードi
264/週
接続方法
パソコンで動く
最新バージョンi
0.9.0
レジストリ公開日i
2026年10月1日
コードの最終更新i
2026年11月14日
作者
vgnshiyer
パッケージ
pypi: apple-books-mcp
mcpb: …/apple-books-mcp-0.9.0.mcpb
ウェブサイト
vgnshiyer.me
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント vgnshiyer で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:5 日前

  • ✓ 合格

    ライセンスがある

    Apache-2.0を使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

OSV.dev に apple-books-mcp@0.9.0 の登録はありません

このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月15日

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/vgnshiyer-apple-books-mcp.svg)](https://mcp.popnx.com/en/servers/vgnshiyer-apple-books-mcp)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

ゲーム・スポーツ・料理・学習のほかのサーバーとの比較i

  • このカテゴリのほかの1614件のうち98%よりスターが多い
  • このカテゴリのほかの1614件のうち31%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1614件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Apple Booksは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は5 日前、最新バージョン(0.9.0)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv), MCPBも必要です。

代わりに使えるものは?

同じカテゴリには:Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

WilmAI

Finland's Wilma school system for parents and students: schedule, homework, exams and messages.

作者:aikarjal成長中↓ 1399/週★ 89 リポジトリ全体のスター10 日前更新

パソコンで動く✓ 提供元 · wilm.ai

Savecraft

Savecraft serves real save game data and expert game knowledge to AI assistants.

作者:joshsymonds初期★ 137 か月前更新

クラウドで動くリポジトリはアーカイブ済み✓ 提供元 · savecraft.gg

GoodWatch

Find movies and TV shows, track watches, and get suggestions based on your taste.

作者:alp82初期★ 50 リポジトリ全体のスター30 日前更新

クラウドで動く✓ 提供元 · goodwatch.app
似たものと比べる
これ
Apple Books
Anime GardenWilmAILumify Sports IntelligenceSavecraftGoodWatch
動く場所パソコンにインストールが必要クラウドで動き、インストール不要パソコンにインストールが必要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要
キーが必要いいえいいえいいえはいいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/34/43/34/43/44/4
ライセンスApache-2.0AGPL-3.0MITMITApache-2.0MIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Apple Books MCP

Model Context Protocol (MCP) server for Apple Books.

At a glance

  • Pick up where you left off — Claude sees the book you're reading, your progress and the chapter you're on, and pulls that chapter's text (chapter_id="current") and your highlights when it needs them.
  • Find any book — by title or author, ignoring case, accents and curly quotes, with a link that opens it in Apple Books.
  • Expand on any highlight — get the surrounding paragraph explained in context, with the exact anchor you marked shown in «...».
  • Revisit a book — pull your highlights, cluster them by theme, and quote you back to yourself.
  • Reflect on your reading — patterns across books, recurring ideas in your highlights, what you're actually drawn to.

https://github.com/user-attachments/assets/77a5a29b-bfd7-4275-a4af-8d6c51a4527e

And much more!

Available Tools

List and search tools return one page at a time: 50 annotations or 200 books by default, limit between 1 and 500, and offset for the next page. When there is more, the output says so and names the next offset.

How results work:

  • Ids are integers: every row starts with one, as in [175] Title by Author, to pass on as book_id, annotation_id or collection_id. A numeric string such as "175" is accepted too; true, false and fractions are not ids.
  • A failure (an unknown id, a book that isn't downloaded, a bad color) comes back as an MCP error (isError) whose message names what to do next, often another tool to call. An empty result ("No books matched …") is a normal answer, not an error.
  • Text taken from your books (chapter text, the passage around a highlight, a table of contents, a book's description) is wrapped in … . The server's instructions tell Claude that this text is untrusted data from the book, never instructions to follow.
  • Highlights from books you've removed from the library are kept by Apple Books. They are shown per removed book, as "Removed book (asset 3F2A1B2C…)", after the books still in your library.
Collections
ToolDescriptionParameters
list_all_collectionsList all collectionslimit?: int (default: 200), offset?: int
get_collection_booksGet all books in a collectioncollection_id: int
describe_collectionGet details of a collectioncollection_id: int
search_collections_by_titleSearch for collections by titletitle: str
Editing collections (opt-in)

Off by default. Enable by adding --enable-writes to the server args:

"args": ["apple-books-mcp", "--enable-writes"]

With the Claude Desktop extension, turn on Allow editing collections in the extension's settings instead.

Apple provides no automation API for collections, so these write directly to the library database — behind guard rails: every write refuses while Books is open, takes an automatic WAL-safe backup first (~/.py_apple_books/backups/), validates the schema and aborts on drift, and only touches user-created collections (plus "Want to Read" membership). Deleting a collection never deletes the books in it.

⚠️ If iCloud sync for collections is enabled, direct edits may not propagate to other devices and can be reverted by a cloud re-sync.

ToolDescriptionParameters
create_collectionCreate a new collectiontitle: str, details?: str
rename_collectionRename a user-created collectioncollection_id: int, new_title: str
delete_collectionDelete a user-created collection (books untouched)collection_id: int
add_book_to_collectionAdd a book to a collection (idempotent)collection_id: int, book_id: int
remove_book_from_collectionRemove a book from a collection (idempotent)collection_id: int, book_id: int
Books
ToolDescriptionParameters
list_all_booksList all bookslimit?: int (default: 200), offset?: int
search_booksFind books whose title or author contains the query, ignoring case, accents and quote/dash stylequery: str, limit?: int (default: 200), offset?: int
search_books_by_titleSearch for books by title (same matching, titles only)title: str, limit?: int (default: 200), offset?: int
describe_bookGet details of a particular book (metadata, progress, annotation count, description), whether its text is readable (see below) and an "Open in Books" linkbook_id: int
list_annotationsAnnotations for a book in reading order (id + text + chapter per row, with your notes)book_id: int, limit?: int (default: 50), offset?: int
get_books_by_genreGet books by genre (substring match)genre: str, limit?: int (default: 200), offset?: int

describe_book has a Readable text line saying whether the chapter tools can read the book, and if not why: yes (EPUB), a PDF, DRM-protected, not downloaded (in iCloud only, an Apple Books Store title, or never downloaded) or a missing file. It is worked out from the library's records and file metadata, without opening the book: reading a file that is only in iCloud would make macOS download it.

Open in Books links (ibooks://assetid/…) open the book in Apple Books. They appear in describe_book, describe_annotation, get_current_reading_position and the Currently Reading resource.

Reading Status
ToolDescriptionParameters
get_books_in_progressGet books currently being readlimit?: int (default: 200), offset?: int
get_finished_booksGet books that have been finishedlimit?: int (default: 200), offset?: int
get_unstarted_booksGet books not yet startedlimit?: int (default: 200), offset?: int
get_recently_read_booksGet the most recently read bookslimit?: int (default: 10), offset?: int
Annotations
ToolDescriptionParameters
list_all_annotationsBrowse every annotation grouped by book, newest first, with your noteslimit?: int (default: 50), offset?: int
recent_annotationsGet most recent annotations (flat, with date + book per row)limit?: int (default: 10), offset?: int
describe_annotationGet full details of a single annotation, with the book's "Open in Books" linkannotation_id: int
get_annotation_contextText window around a highlight (the paragraph it's in), with the highlight marked «...»annotation_id: int, chars_before?: int (default: 500), chars_after?: int (default: 500)
get_highlights_by_colorHighlights of a particular color, grouped by bookcolor: yellow\green\blue\pink\purple, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
search_notesSearch user notes (shows highlight + note inline)note: str, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
search_annotationsSearch across highlights + notes + surrounding text (shows notes inline)text: str, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
get_annotations_by_date_rangeAnnotations within a date range, inclusive of the before day, local time (flat, with date + book per row)after?: YYYY-MM-DD, before?: YYYY-MM-DD, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
Library Stats
ToolDescriptionParameters
get_library_statsGet library summary with reading statsNone
Book Content

Only works for non-DRM EPUBs downloaded to this Mac (imported books, Project Gutenberg, Standard Ebooks, etc.). Apple Books Store purchases are usually FairPlay-protected and return a clear error, and iCloud-only books a "not downloaded" hint; describe_book's "Readable text" line tells in advance.

ToolDescriptionParameters
list_book_chaptersTable of contents for a book (chapter titles, order, nesting)book_id: int
get_chapter_contentPlain-text content of a chapter, with optional offset + max_chars slicing. chapter_id="current" (the default) reads the chapter you're on in Apple Booksbook_id: int, chapter_id?: str (default: "current"), offset?: int, max_chars?: int
get_current_reading_positionThe chapter the user last left off reading (via Apple Books' auto-bookmark CFI), with an "Open in Books" linkbook_id: int

Available Resources

Attachable data objects accessible from Claude Desktop's resource picker.

ResourceURIDescription
Currently Readingapple-books://currently-readingA short pointer to the book you're reading right now (the most recently opened in-progress book): title, author, book id, progress, an "Open in Books" link, the chapter you left off on with its chapter id (for non-DRM EPUBs; otherwise why its text can't be read), and how many highlights you have in it. It carries no chapter text or highlights; Claude fetches those on demand with get_chapter_content and list_annotations. Attach to any conversation to focus Claude on your current read.

Available Prompts

One-click workflows, accessible from Claude Desktop's prompt picker.

PromptDescriptionArguments
weekly_digestSummarize what I've read and highlighted in the past weekdays?: int (default: 7)
library_snapshotA reflection on my whole reading lifeNone
revisit_bookRevisit your notes and highlights from a specific bookbook_title: str

Installation

Requirements
  • macOS, with Apple Books opened at least once (it creates the library the server reads).
  • Python 3.10 or newer. uvx and the Claude Desktop extension provide one if needed.
  • Installed with the server: mcp >= 1.12 (< 2) and py-apple-books >= 1.10 (< 2).
Using uv (recommended)

uvx runs apple-books-mcp without a separate install step.

brew install uv  # for macos

uvx apple-books-mcp --version

The first run downloads about 14 MB of dependencies and can take up to a minute, which is close to how long Claude waits for a server to start. Running the command above once in Terminal warms uv's cache before you add the server to Claude. --version prints the apple-books-mcp, mcp and py-apple-books versions uvx resolved.

Then add the server to Claude with the JSON config or the Claude Code command below.

Claude Desktop extension (.mcpb)

Claude Desktop can also install apple-books-mcp as an extension, without editing its config: download apple-books-mcp- .mcpb from the latest GitHub release, double-click it (or open Settings → Extensions → Install Extension… and pick the file), and click Install. Desktop installs uv and the locked dependencies itself. Allow editing collections in the extension's settings does the same as --enable-writes.

On organization-managed Claude (Team/Enterprise), admins can limit De

冒頭だけを表示しています。続きはリポジトリで読めます