WebinarIgnition

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

• 接続方法: クラウドで動く
• トランスポート: Streamable HTTP
• カテゴリ: チャット・メール

インストール

使っているAIアプリを選んで、設定をコピーしてください。

必要なもの

• クラウドで動くインストール不要。インターネット経由でつながります

どのアプリを使っていますか？

https://mcp.webinarignition.com/?src=registry

claude mcp add --transport http webinarignition 'https://mcp.webinarignition.com/?src=registry'

{
  "mcpServers": {
    "webinarignition": {
      "url": "https://mcp.webinarignition.com/?src=registry"
    }
  }
}

{
  "servers": {
    "webinarignition": {
      "type": "http",
      "url": "https://mcp.webinarignition.com/?src=registry"
    }
  }
}

https://mcp.webinarignition.com/?src=registry

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

• wi_get_session_facts

  Reads what the current webinar session has collected so far — topic, audience, date, texts state. Read-only: no session is created, no site is touched, nothing is written. The session already holds what it was told, so nothing in it has to be asked again. Needs `session_id`.

• wi_list_site_abilities

  Lists the abilities the connected WordPress site offers, with their arguments and whether they are read-only, write or destructive. Read-only: it reads a list from the site and changes nothing. Needs `session_id`.

• wi_get_connector_status

  Reads the technical state of the WebinarIgnition connector: version, protocol, which WordPress site is connected, whether the connection is healthy. Read-only, needs no input and changes nothing. `session_id` is optional: the connection belongs to the signed-in person, so any id

• wi_answer_product_question

  Answers a question about WebinarIgnition — price, limits, integrations, whether it fits — from the connector's verified knowledge base. Read-only: no session is created, no site is touched, nothing is changed. The answer comes only from that base: when it holds no matching entry,

• wi_get_setup_plan

  Returns the step-by-step setup plan for the host's WordPress site — what has to be installed, what to click, what the room needs — without touching the site. Read-only. Optional `session_id` adds what the session already knows.

• wi_start_webinar

  Starts a new webinar in WebinarIgnition and returns the first question with tappable options — no sign-in, no setup. Side effect: it creates a new webinar session on the connector and returns a `session_id`; nothing is written to a WordPress site, nothing is published and no emai

• wi_continue_webinar

  Continues an open webinar conversation by exactly one turn: pass what the host said as `text` and get the reply with the next tappable choices. Side effect: the answer is stored in the conversation state (facts, flow position) for `session_id`; nothing is written to a WordPress s

• wi_write_webinar_invitation_emails

  Writes the finished webinar texts for a session that is ready: title, invitation email, reminders and the registration copy. Side effect: it starts a text-generation job on the connector (about a minute) and stores the result in the session; nothing is published to a WordPress si

• wi_check_wordpress

  Checks whether a WordPress address runs WebinarIgnition and in which state: not installed, installed but too old, or ready. Side effect: none — it reads the address over HTTPS and changes nothing. Needs `url`.

• wi_connect_wordpress_woocommerce_site

  Connects this chat to the host's own WordPress site. Side effect: it creates a connect link that the host must open and approve in their own browser — until they do, nothing is connected; no password is seen or stored. Needs `session_id` and `url`.

• wi_disconnect_wordpress

  Drops the stored connection between this chat and the host's WordPress site, and also forgets that this site was ever connected (so a later chat does not offer it again). Material loss / hard to reverse: the connection has to be approved again in the host's own browser before any

• wi_create_webinar_registration_page

  Builds the webinar on the connected WordPress site: it creates the campaign with the facts the session has collected — title, date, room type — and returns the registration and room links. Side effect: it creates real content on the host's site: a campaign with its registration p

• wi_get_build_status

  Reads how far the build of the webinar on the connected site has come: one card with a bar, a percentage, the step running right now and an honest remaining time, plus `fertig` and the registration and room links once it is done. Read-only, it changes nothing on the site. Call it

• wi_create_handoff_link

  Returns a link that carries everything collected so far into the WebinarIgnition dashboard, so the host can finish there. Side effect: it only creates a link with the session data in it; nothing is written to a WordPress site and nothing is sent to anyone. Needs `session_id` (or

• wi_delete_webinar

  Deletes the webinar that belongs to this session from the connected WordPress site — irreversible, it cannot be undone: the campaign and everything attached to it are gone. Needs `session_id`; optional `args` names the campaign when the session holds more than one.

• wi_list_webinar_leads_registrants

  Reads the registrant list of one webinar: name, email, signup time, attended, watched replay, purchased, UTM source, and what each registrant spent. Read-only, it changes nothing. Data comes only from the WordPress site this chat is connected to, the site the host approved, never

• wi_get_webinar_attendance_stats

  Reads how many people registered, how many came live, how many stayed long enough to see the offer and how many watched the replay — with the show-up rate. Read-only, changes nothing. Use it when the host asks how many showed up, what the show-up rate is, whether the reminders wo

• wi_get_webinar_funnel_conversion_stats

  Reads the whole funnel of a webinar — unique visitors, registrations, live attendance, watched enough, offer shown, offer clicked, replay, purchased — with the step-to-step conversion rates, a ranking across the host's webinars and one sentence saying which step to fix first. Rea

• wi_get_webinar_revenue_woocommerce

  Reads what a webinar earned: paid orders and the amount per currency, open orders, refunds — and which offer tier (product) sold how often and for how much. Read-only, changes nothing. Money comes from the host's own shop (WooCommerce or any other shop connected to the site), nev

• wi_list_webinars

  Lists the webinar campaigns of the connected WordPress site: id, title, type (live or automated, evergreen), status, the real start (date, time, timezone, duration), whether it repeats, and the page address. Read-only, it changes nothing. Data comes only from the site this chat i

• wi_get_webinar

  Reads one webinar of the connected WordPress site by its id: title, type, status, host, start date, page address, and whether the emails are already written. Read-only, it changes nothing. Use it after wi_list_webinars when the host picked one campaign, before reading its numbers

• wi_get_webinar_emails

  Reads every email of one webinar with its wording and its timing: the confirmation email (signup) and the five reminder and follow-up emails, each with on or off, subject, heading, inbox preview line, body and its offset (how long before or after the start). Read-only, it changes

• wi_get_registration_fields

  Reads the sign-up form of one webinar as the participant sees it, top to bottom: every field with its slot, its visible label, its type (text, checkbox, textarea, dropdown or a hidden field), whether it is required, and whether it really renders on the participant page. Read-only

• wi_get_webinar_settings

  Reads what can be configured on one webinar and what stands there right now: every editable settings group with each field, its type and its current value, plus the core fields (type, status, date, time, timezone, room phase). `group` narrows it to the catalogue of one area (for

• wi_get_webinar_colors

  Reads which colours the registration, thank-you and room pages really use right now: background, text, button fill and button text, and where they come from (the host's own confirmed brand colours, or the site). With `kind` set to logo or favicon it samples the host's own brand i

• wi_list_webinar_products

  Reads what WooCommerce on the connected site really offers: products with id, name, price and the store currency, either by a search word (name or SKU) or by product ids. It also answers whether a voucher code already exists in the shop. Read-only, it changes nothing. Use it to N

• wi_get_streaming_status

  Reads whether live streaming is connected on the connected site: the install-wide 100ms connection (app credentials or a manual token, and whether a room can be created) and the Daily.co connection (key and domain), plus, for one webinar, its own room state and which video source

• wi_get_webinar_questions

  Reads the questions participants asked in the live console: the open (unanswered) and the answered ones, each with its question id, the text, the attendee's name, the time and the state. Read-only, it changes nothing. Use it when the host asks what people are asking, which questi

• wi_get_webinar_prompter

  Reads the teleprompter state of one webinar: whether the prompter is switched on for this install, the script the host reads out loud (with its trigger lines such as [TRIGGER:CTA "..."]), and the language it is written in. Read-only, it changes nothing. Use it when the host asks

• wi_get_renotification_status

  Reads the re-notification state of one webinar: whether the date was changed and the new invitation is still pending, how many registered people would receive it, and the banner text and button the page shows. Read-only, it changes nothing. Use it when the host asks whether every

• wi_check_mail_delivery

  Measures whether email from this site actually sends, whether it lands in the inbox rather than in spam, and how fast it goes out, with one honest verdict per point. Side effect: a fresh measurement sends REAL email from the host's site, which is why this tool is not read-only; i

• wi_check_embedding

  Checks whether an external page can be shown inside the live room's CTA area (sidebar or overlay): whether it sends the headers that allow embedding, and what would go wrong if it does not. Read-only, it changes nothing. Use it BEFORE embedding a booking or checkout page into a C

• wi_list_webinar_links

  Lists the short tracking links of one webinar: the code, the full short address, the channel it belongs to, the UTM parameters it carries and how often it was clicked. Read-only, it changes nothing. Use it when the host asks which links exist, which one to put into an invitation,

• wi_list_webhooks

  Lists the outgoing webhooks of this WordPress install: id, name, trigger, delivery and mirror address, method and format, whether it is active, and how many mapping or condition rules it carries. These webhooks fire for EVERY webinar on the install, not only the one open in the c

• wi_read_webhook_deliveries

  Reads what a webhook's mirror or test address really received, straight from that service: for each delivery the time, the HTTP method and the exact payload that was sent. Read-only, it changes nothing. Use it after a test delivery (that is wi_test_webhook) when the host wants to

• wi_get_webhook_test_address

  Creates a fresh, free webhook.site test address that needs no account, to be used as a webhook's mirror address, so the host can watch deliveries land without giving anyone access to their real CRM or email provider. Side effect: it creates a new address at that third-party test

• wi_find_wordpress_user

  Finds the users of this WordPress install by a search word, or lists them: id, display name, email, and the avatar address. Read-only, it changes nothing. Use it when the host names the person whose face should stand on the page (that is wi_change_host_photo), instead of asking f

• wi_find_media

  Searches the media library of the connected site for images and returns id, address, title and alt text. Read-only, it changes nothing. Use it when the host wants a picture somewhere (a page block with wi_change_webinar_page_block, or the host photo with wi_change_host_photo) and

• wi_get_webinar_page_blocks

  Reads one page of a webinar as a flat list of blocks, top to bottom: each block with its path, its type and its current text or image. Read-only, it changes nothing. Use it BEFORE changing a block (the change needs the path from here) and when the host asks what stands on their p

• wi_run_webinar_preflight

  Runs the full readiness check of one webinar and answers point by point what is ready and what would break in front of the participants: pages, dates (including a thank-you page that shows a different date than the campaign), emails and their timing, video source, the offer in th

• wi_get_webinar_checklist

  Shows the setup checklist of one webinar, the same list the dashboard shows: every step with its state, what is already done, what is still missing, and the readiness score from the last preflight check. Read-only, it changes nothing. Use it when the host asks what is left before

• wi_check_participant_journey

  Traces what one participant experiences in this webinar, in order and WITHOUT sending anything: which confirmation and reminder emails go out at which moment (and which are switched off), when the room opens, when the offer appears, and when the replay shows. Read-only, it change

• wi_get_webinar_report

  Reads one report of a webinar in a normalised shape: single values such as registrations, attendance and conversion, plus the table rows behind them. `type` picks the report: funnel (visitor to registration to attendance to offer), mail_waves (what the live bulk send and the ever

• wi_export_registrants_csv

  Reads the registrant list of one webinar as CSV text, the same export the dashboard downloads: one row per registrant with the columns the site writes. Read-only, it changes nothing. The text is capped at 20000 characters; when the list is longer the answer says so and how long i

• wi_export_webinar

  Reads one webinar as the full export payload the dashboard produces: every campaign field, the page content, the emails and the settings, as a JSON string. Read-only, it changes nothing. The payload is large (often tens of thousands of characters), so it is capped here at 20000 c

• wi_change_webinar_text

  Changes ONE existing wording of a webinar without rebuilding anything: a block on the page, text inside the page's raw code, the campaign copy (landing, sales copy, headlines, mail subjects and bodies) or the visible page heading. Side effect: it writes on the connected WordPress

• wi_change_webinar_title

  Changes the NAME of an existing webinar: the title in the WebinarIgnition dashboard and in the webinar list, which is what a host means by "the title". Side effect: it writes on the connected WordPress site and also updates the linked page title and the places in the copy where t

• wi_change_webinar_schedule

  Moves a webinar to another date, clock time, timezone or length, on an existing webinar and without rebuilding anything; for an evergreen webinar it changes the recurring air-times. Side effect: it writes on the connected WordPress site, the participant pages show the new date at

• wi_change_webinar_room

  Sets which phase the room of a webinar shows right now: countdown, live, replay or closed. Side effect: every participant sees the new phase at once on the connected WordPress site; the campaign itself is not published or unpublished and no page is rebuilt. Needs `session_id`, `w

• wi_change_webinar_visibility

  Publishes a webinar or takes it offline again: `status` publish or draft. Side effect: on publish the registration page and the room are public and can be found, on draft participants see nothing and registrations stop; it writes on the connected WordPress site. Needs `session_id

• wi_change_webinar_video

  Changes where the video of a webinar comes from: the live room (100ms, an embedded YouTube or Vimeo clip, or an MP4), the teaser on the registration page, or the video on the thank-you page. Side effect: it writes on the connected WordPress site. Participants see the new source t

• wi_change_webinar_cta

  Changes ONE call to action in the live webinar room: the offer or booking box, its tab name, its body, its button and whether it is shown, or the moment an evergreen webinar reveals it. Side effect: it writes on the connected WordPress site. Participants see it in the room; nothi

• wi_change_webinar_reminders

  Sets how many reminder emails a webinar sends and which preset decides their timing: factory, all before the start, all after the start, or the mixed 4 plus 1 preset. Side effect: it writes on the connected WordPress site. Every registrant is affected from the next send on; the w

• wi_change_webinar_email

  Changes ONE field of ONE email of a webinar: the confirmation email (signup) or reminder 1 to 5, and either its subject, its heading, its inbox preview line, its body, whether it is switched on, or when it goes out. Side effect: it writes on the connected WordPress site. Every re

• wi_change_registration_fields

  Adds, renames, requires, removes or reorders the fields of a webinar's sign-up form, which is what participants fill in before they get in. Side effect: it writes on the connected WordPress site. Participants see the new form on their next visit and the change affects the data ev

• wi_change_site_colors

  Sets the four brand colours of the WEBSITE: background, text, the button fill and the button text. The webinar pages take them from there, so this is not a setting of one webinar and not one campaign's look. Side effect: it writes on the connected WordPress site. `target` decides

• wi_change_host_photo

  Sets, replaces or clears the photo of the host on the registration page and in the registration animation. Side effect: it writes on the connected WordPress site. Participants see the new face on their next visit. Needs `session_id` and `webinar_id` from wi_list_webinars, plus ON

• wi_change_webinar_offer

  Puts the host's offer into the live webinar room, or updates the one already there: the product, further products as tiers, the webinar price with its voucher and the window it holds in. Side effect: it writes on the connected WordPress site. Participants see it in the room, and

• wi_change_webinar_page_block

  Changes ONE block on the registration or thank-you page of a webinar: its text, or its image. Side effect: it writes on the connected WordPress site. Participants see it on their next visit; nothing else on the page moves. Needs `session_id`, `webinar_id` and `path`, which comes

• wi_change_registration_animation

  Puts the built-in registration animation on a webinar's registration page: the self-running slides from the benefit to the host to the sign-up, either INSTEAD of the video (mode animation) or BELOW it (mode both). Side effect: it writes on the connected WordPress site. Participan

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

• ✓ 合格

  作者とリポジトリが一致

  レジストリ名はドメイン webinarignition.com で確認済みです（レジストリがドメインの所有を確認しています）

• … 未チェック

  今もメンテナンスされている

  このリポジトリはまだGitHubから読み取っていません

• … 未チェック

  ライセンスがある

  このリポジトリはまだGitHubから読み取っていません

• ✓ 合格

  エンドポイントが応答する

  415ミリ秒で応答（HTTP 200）

• – 対象外

  OAuthでサインイン

  サインイン不要

• ✓ 合格

  ツールの説明に隠れた指示がない

  60件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

チャット・メールのほかのサーバーとの比較i

• このカテゴリのほかの1771件のうち0%よりスターが多い
• このカテゴリのほかの1771件のうち86%より最近レジストリに公開
• 基本チェックの結果が、このカテゴリのほかの1771件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方：★ GitHubスターi3つの柱：レビュー · チェック · 利用状況i更新＝最新バージョンをレジストリに公開した日i

作者のREADME

AI client (Claude / ChatGPT / Cursor / …)

https://mcp.webinarignition.com/?src=registry