プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説 ログイン

Chopper

作者:wiiiktorバージョン 0.1.10i★ 5iパソコンで動くリポジトリ ↗
レジストリ名io.github.wiiiktor/chopper

インストール方法

できること

Cuts the exact quotes that answer a question out of long text and reranks passages, in one pass.

作者による原文

  • 接続方法 パソコンで動く
  • アカウントまたはキー キー不要
  • カテゴリ その他

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気12/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ12/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア24/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

ひとことで AI にインストールしてもらう

Chopper をインストールして。https://mcp.popnx.com/i/wiiiktor-chopper.md に従い、コマンドを見せて、私が OK するまで実行しないで。

パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る

チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月18日

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

AI にインストールしてもらう

このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude に MCP server Chopper を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "chopper": { "command": "uvx", "args": [ "chopper-rag" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Chopper のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. パソコン版 Claude アプリの設定ファイルを開く

    SettingsDeveloperEdit Config

  3. この設定を貼り付けて保存

    {
      "mcpServers": {
        "chopper": {
          "command": "uvx",
          "args": [
            "chopper-rag"
          ]
        }
      }
    }
  4. Claude を終了してもう一度開く

  5. 試してみる

    Chopper を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Chopper を使っていると言うか、回答に Chopper のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • CHOPPER_VARIANT モデルのサイズと言語:base(デフォルト)、small、base-pl(ポーランド語)、mmbert-base-pl、small-pl
    英語の原文を見るModel size and language: base (default), small, base-pl (Polish), mmbert-base-pl, small-pl
    · 初期値 base
  • CHOPPER_DEVICE auto(デフォルト)、cpu、cuda のいずれか。GPU の使用を推奨します
    英語の原文を見るauto (default), cpu or cuda; a GPU is recommended
    · 初期値 auto
  • CHOPPER_ALLOWED_DIRS chop_files が読み取れるディレクトリ(デフォルト:ホームディレクトリ)
    英語の原文を見るDirectories chop_files may read (default: the home directory)
  • CHOPPER_SNAP sentence(デフォルト:文全体)、word(単語の途中では切らない)、または none(生)
    英語の原文を見るsentence (default: whole sentences), word (never cut inside a word) or none (raw)
    · 初期値 sentence

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Chopper につなげません

Chopper はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Chopper につなげるアプリを使う

  • 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)

B · その他 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude Code に MCP server Chopper を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user chopper -- uvx chopper-rag 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Chopper のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  3. このコマンドを貼り付けて Enter

    claude mcp add --scope user chopper -- uvx chopper-rag
  4. Claude Code で /mcp と入力

    Chopper が一覧にあり、接続済みと表示されれば OK です

  5. 試してみる

    Chopper を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Chopper を使っていると言うか、回答に Chopper のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • CHOPPER_VARIANT モデルのサイズと言語:base(デフォルト)、small、base-pl(ポーランド語)、mmbert-base-pl、small-pl
    英語の原文を見るModel size and language: base (default), small, base-pl (Polish), mmbert-base-pl, small-pl
    · 初期値 base
  • CHOPPER_DEVICE auto(デフォルト)、cpu、cuda のいずれか。GPU の使用を推奨します
    英語の原文を見るauto (default), cpu or cuda; a GPU is recommended
    · 初期値 auto
  • CHOPPER_ALLOWED_DIRS chop_files が読み取れるディレクトリ(デフォルト:ホームディレクトリ)
    英語の原文を見るDirectories chop_files may read (default: the home directory)
  • CHOPPER_SNAP sentence(デフォルト:文全体)、word(単語の途中では切らない)、または none(生)
    英語の原文を見るsentence (default: whole sentences), word (never cut inside a word) or none (raw)
    · 初期値 sentence

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Cursor に MCP server Chopper を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "chopper": { "command": "uvx", "args": [ "chopper-rag" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Chopper のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで Cursor を開く

    Cursor で開く

    Cursor がインストールの確認をするので Install を押します

  3. Cursor の AI チャットを Agent モードで開く

  4. 試してみる

    Chopper を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Chopper を使っていると言うか、回答に Chopper のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • CHOPPER_VARIANT モデルのサイズと言語:base(デフォルト)、small、base-pl(ポーランド語)、mmbert-base-pl、small-pl
    英語の原文を見るModel size and language: base (default), small, base-pl (Polish), mmbert-base-pl, small-pl
    · 初期値 base
  • CHOPPER_DEVICE auto(デフォルト)、cpu、cuda のいずれか。GPU の使用を推奨します
    英語の原文を見るauto (default), cpu or cuda; a GPU is recommended
    · 初期値 auto
  • CHOPPER_ALLOWED_DIRS chop_files が読み取れるディレクトリ(デフォルト:ホームディレクトリ)
    英語の原文を見るDirectories chop_files may read (default: the home directory)
  • CHOPPER_SNAP sentence(デフォルト:文全体)、word(単語の途中では切らない)、または none(生)
    英語の原文を見るsentence (default: whole sentences), word (never cut inside a word) or none (raw)
    · 初期値 sentence

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの VS Code に MCP server Chopper を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "chopper": { "type": "stdio", "command": "uvx", "args": [ "chopper-rag" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Chopper のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで VS Code を開く

    VS Code で開く

    VS Code がインストールの確認をするので Install を押します

  3. VS Code の AI チャットを Agent モードで開く

  4. 試してみる

    Chopper を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Chopper を使っていると言うか、回答に Chopper のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • CHOPPER_VARIANT モデルのサイズと言語:base(デフォルト)、small、base-pl(ポーランド語)、mmbert-base-pl、small-pl
    英語の原文を見るModel size and language: base (default), small, base-pl (Polish), mmbert-base-pl, small-pl
    · 初期値 base
  • CHOPPER_DEVICE auto(デフォルト)、cpu、cuda のいずれか。GPU の使用を推奨します
    英語の原文を見るauto (default), cpu or cuda; a GPU is recommended
    · 初期値 auto
  • CHOPPER_ALLOWED_DIRS chop_files が読み取れるディレクトリ(デフォルト:ホームディレクトリ)
    英語の原文を見るDirectories chop_files may read (default: the home directory)
  • CHOPPER_SNAP sentence(デフォルト:文全体)、word(単語の途中では切らない)、または none(生)
    英語の原文を見るsentence (default: whole sentences), word (never cut inside a word) or none (raw)
    · 初期値 sentence

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Chopper を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

claude mcp add --scope user chopper -- uvx chopper-rag

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "chopper": {
      "command": "uvx",
      "args": [
        "chopper-rag"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "chopper": {
      "command": "uvx",
      "args": [
        "chopper-rag"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "chopper": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "chopper-rag"
      ]
    }
  }
}

自分で入力する値

  • CHOPPER_VARIANT env
    モデルのサイズと言語:base(デフォルト)、small、base-pl(ポーランド語)、mmbert-base-pl、small-pl
    英語の原文を見るModel size and language: base (default), small, base-pl (Polish), mmbert-base-pl, small-pl
  • CHOPPER_DEVICE env
    auto(デフォルト)、cpu、cuda のいずれか。GPU の使用を推奨します
    英語の原文を見るauto (default), cpu or cuda; a GPU is recommended
  • CHOPPER_ALLOWED_DIRS env
    chop_files が読み取れるディレクトリ(デフォルト:ホームディレクトリ)
    英語の原文を見るDirectories chop_files may read (default: the home directory)
  • CHOPPER_SNAP env
    sentence(デフォルト:文全体)、word(単語の途中では切らない)、または none(生)
    英語の原文を見るsentence (default: whole sentences), word (never cut inside a word) or none (raw)

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

週あたりのダウンロードi
330/週
接続方法
パソコンで動く
最新バージョンi
0.1.10
カテゴリi
その他
レジストリ公開日i
2026年11月18日
コードの最終更新i
2026年11月18日
作者
wiiiktor
パッケージ
pypi: chopper-rag
ウェブサイト
github.com
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月20日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント wiiiktor で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:一昨日

  • ✓ 合格

    ライセンスがある

    MITを使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

まだ確認していません

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/wiiiktor-chopper.svg)](https://mcp.popnx.com/en/servers/wiiiktor-chopper)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

その他のほかのサーバーとの比較i

  • このカテゴリのほかの20993件のうち95%よりスターが多い
  • このカテゴリのほかの20993件のうち94%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの20993件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Chopperは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は一昨日、最新バージョン(0.1.10)がレジストリに届いたのは一昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73広く使われている★ 9.1万4 日前更新

クラウドで動く✓ 提供元 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ広く使われている★ 92762 か月前更新

クラウドで動く✓ 提供元 · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

作者:JanDeDobbeleer広く使われている★ 2.4万 リポジトリ全体のスター31 日前更新

クラウドで動く✓ 提供元 · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI成長中★ 582314 か月前更新

クラウドで動くリポジトリはアーカイブ済み✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom広く使われている★ 51374 か月前更新

クラウドで動く✓ 提供元 · jitsu.com
似たものと比べる
これ
Chopper
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
動く場所パソコンにインストールが必要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要クラウドで動き、インストール不要
キーが必要いいえいいえいいえいいえいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえいいえ
基本チェック3/34/44/44/41/44/4
ライセンスMITAGPL-3.0AGPL-3.0MITApache-2.0MIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

70-second video: youtu.be/KMvmdXCEOJU Try it in your browser, nothing to install: English demo · Polish demo They run the recommended base chopper (0.31B) on your CPU, with small (0.14B) as a faster option. See it on real examples: 20 English questions, Chopper vs Opus 5.5 vs gold (PDF)

Where this is going. The standalone chopper is a first, practical step. The main idea is an integrated chopper: chopping built into the answering LLM itself, reading the model's own cache of the session instead of re-encoding the text in a second model, which should give the highest possible quality and speed. A proof of concept with MiniCPM3-4B is described here.

Chopper 0.3B close to Opus 5.5 in cutting out the best pieces

Chops are pieces cut out of the original text snippets retrieved from a database or a long conversation: exact quotes, never rewritten. The chopper (mmBERT, 0.31B) makes them; for comparison, Claude Opus 5.5 makes them too, also forced to quote directly.

What is new: a new method, invented in November 2026 in Poland (EU). The chopper is not an LLM summarising the snippets:

a small encoder reads the question and all 20 snippets together in one pass and marks every word keep or drop. There is no

text generation, so it is fast: 50 ms per question (20 snippets, ~2,400 tokens) on a consumer-grade GPU (RTX 3090), 36 ms with mmBERT-small.

One database retrieval per question, even at 4 hops. Every result below uses a single retrieval: each question gets its

20 snippets once, the chopper cuts them once, and Qwen3-14B answers once. There are no follow-up searches and no second

rounds, so a 4-hop question has to be chained from one cut.

A reranker that also gives you the chops

One model replaces both the reranker and the compressor. Full comparison: below.

Qwen3-14B answering from full snippets or just short chops

400 MuSiQue questions, 100 each at 1, 2, 3 and 4 hops, each with its own 20 retrieved snippets. Qwen3-14B (4-bit, no fine-tuning, no thinking mode) answers from the given text only; gpt-5.6-luna judges. Length = prompt tokens. Each score counts every correct answer, including those from incomplete chops; the number in brackets counts only questions whose chops kept every hop and the answer.

Qwen3-14B: all snippets vs chops from the chopper vs chops from Opus 5.5

Read each diagram like website traffic: questions flow left to right, and at every hop the ones whose fact the chops missed drop out; the last stage is Qwen3-14B answering correctly. Top: all 20 retrieved snippets. Middle: the chopper's chops. Bottom: Opus 5.5's chops.

The last stage is the table's score; the lighter block under it counts answers Qwen got right from incomplete chops, and the number in brackets leaves them out. More: docs/DETAILS.md §7.

Also a reranker: ranking and chopping in one pass

The chopper scores every passage while it chops (mean p(KEEP) of the passage's 16 most likely tokens). On the 8-language rerank holdout (400 queries, 16 passages each, never trained on), ranked against dedicated rerankers:

ranking 16 passagesnDCG@10Hit@1GPU time per query (RTX 3090)
chopper, mmBERT-base (0.31B), one pass0.9730.9720.20 s, chops + ANSWER/SEARCH included
bge-reranker-v2-m3 (0.57B)0.9840.9850.20 s
Qwen3-Reranker-0.6B0.9770.9720.77 s
Qwen3-Reranker-4B0.9860.9903.3 s

The chopper was never trained to rank, yet it is within about one point of the best rerankers at the speed of the fastest, so a pipeline can drop its reranker: retrieve → chopper gives the ranking *and* the quotes. Caveats (this test is easy for every model; the labels favour Qwen3-Reranker-0.6B) in the details.

Against other context compressors

Same 400 questions, same 20 snippets, same Qwen3-14B prompt; each compressor cuts the snippets once:

Qwen3-14B answering fromtokens1-hop2-hop3-hop4-hop
all 20 snippets (no compression)2,62084282212
LLMLingua-2 (Microsoft), rate 0.137428624
Provence (Naver), its default threshold 0.126377272616
Provence, threshold 0.515271242111
chops from the chopper, mmBERT-small (0.14B)21772493223
chops from the chopper, mmBERT-base (0.31B)22883484529

LLMLingua-2 drops tokens without looking at the question, so the facts a chain needs rarely survive. Provence reads the question but prunes each snippet on its own. To be fair to them: the chopper was trained on MuSiQue's train split (this test uses its dev split) and on other multi-hop data, while both were trained for general single-passage use.

Against XProvence on its own benchmark

XProvence (Naver, 2026) prunes each retrieved passage to the relevant sentences and is built on bge-reranker-v2-m3. We re-ran its own evaluation: its questions, its retrieved documents, its prompts and its metric (share of the gold answer's character 3-grams found in the answer), 150 questions per set, with Qwen3-14B and with the paper's own answer model aya-expanse-8b (our no-pruning aya scores match the paper's within 0.01 on MKQA, TyDi QA and XPQA).

Qwen3-14B answering, score (share of the text removed)MKQA, 10 languagesTyDi QAXPQA, 7 languagesMedExpQA
all documents0.4620.7540.3760.940
Chopper, whole sentences0.400 (90%)0.693 (92%)0.286 (87%)0.698 (97%)
XProvence, threshold 0.70.402 (85%)0.683 (84%)0.211 (99.6%)0.695 (99%)
XProvence, threshold 0.30.443 (58%)0.728 (71%)0.295 (78%)0.845 (52%)
XProvence, threshold 0.1 (default)0.455 (36%)0.737 (57%)0.369 (23%)0.930 (8%)
LLMLingua-2, rate 0.330.408 (65%)0.576 (67%)0.307 (64%)0.847 (64%)
  • At the same aggressive cut (85–90% of the text removed), Chopper ties or beats XProvence; with aya-expanse-8b too (MKQA 0.414 vs 0.415, TyDi QA 0.712 vs 0.712; on XPQA XProvence's 0.7 setting removes 99.6%, so the fair pair is its 0.3 setting: 0.410 vs 0.407, removing 87% vs 78%). It is also ~5× faster (0.03 s vs 0.17 s per question).
  • XProvence is better at light trimming: at its default it removes only 23–57% and stays near full accuracy. Chopper always keeps a few quotes, which costs 6–9 points against reading everything; on MedExpQA (one long explanation per question) it cuts away what the answer needs.
  • As a reranker XProvence is still ahead (nDCG@10 0.985 vs 0.974 on our 8-language holdout). A Chopper on bge-reranker-v2-m3 (XProvence's own base, Apache 2.0) is in training to improve Chopper as a reranker, so this gap will probably close.
  • License: XProvence is CC BY-NC-ND 4.0 (non-commercial); Chopper is MIT. Full tables, aya results and method: DETAILS.

Chopper 🔪 keep only the part of RAG that answers the question

Standard RAG (retrieval-augmented generation) pastes whole passages into your model's context, and they stay there. About 95% of those tokens don't help. After a few lookups, a long session is mostly retrieval spam.

Chopper is a small model that reads the retrieved passages first and keeps only the fragments that matter. Your model then sees ~100 tokens instead of ~3,000 per lookup, and a session can carry dozens of lookups.

question ─► retrieve 16 passages ─► 🔪 rank + chop in one pass ─► model answers, or asks one follow-up search
  • 🎯 Clean context: only useful fragments enter the session; the raw passages never stay.
  • ⚡ Less compute: the main model reads 2–5% of the retrieved text.
  • 🏅 Also a reranker: the same pass ranks the passages almost as well as bge-reranker-v2-m3 (nDCG@10 0.973 vs 0.984, 8 languages), at the same speed. No separate reranker needed.
  • 🔗 Multi-hop works: the model writes a follow-up question when a fact is missing, and searches again.
  • 🏠 Built on one home GPU: every dataset and model here was made on a single RTX 3090 (some labels came from APIs).

Results at a glance

retrieved text the main model reads2–5% (about 20–40× less); the answer is still in the kept text for 85% of HotpotQA and 69% of TriviaQA questions

| "nothing here": pools whose answer was deleted (8 languages,

冒頭だけを表示しています。続きはリポジトリで読めます