What it does
MCP server for Cisco Umbrella's deployment, admin, policy, reporting, and investigate APIs.
- Connects パソコンで動く
- Account or key Needs CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE
- Category 開発者ツール
一緒に使える
この種の作業を AI に教える Skill。これと一緒に使えます
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
この順位の理由
一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり
| 人気 | 0/80 | GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます |
|---|---|---|
| 新しさ | 12/12 | 30 日以内のリリースかコード更新で満点 |
| 応答中 | 0/8 | 前回の確認でクラウドのエンドポイントが応答 |
| 利用スコア | 12/100 |
品質: 基本チェック 2/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)
インストール
使っているAIアプリを選んで、設定をコピーしてください。
ひとことで AI にインストールしてもらう
Cisco Umbrella をインストールして。https://mcp.popnx.com/i/wyre-ai-cisco-umbrella-mcp.md に従い、コマンドを見せて、私が OK するまで実行しないで。パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る
チェック 2/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日
まず:どの AI を使っていますか?
使っているアプリを選ぶと、下に手順が表示されます。
Claude につなげますが、先に準備が必要です
Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
AI にインストールしてもらう
このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude に MCP server Cisco Umbrella を入れてください。順番に:1) docker --version で Docker があるか確認。なければ https://www.docker.com/products/docker-desktop/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Cisco Umbrella のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
Docker を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
docker --version- バージョン番号(例 Docker version …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: Docker Desktop を入れます:Mac は Docker.dmg を開いてアイコンを「アプリケーション」へドラッグ(Mac に合わせて Apple silicon か Intel を選ぶ)· Windows は Docker Desktop Installer.exe をダブルクリック · 入れたら Docker Desktop アプリを開いたままにします。curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
docker --version一度入れれば、Docker を使うすべてのツールで使えます
Cisco Umbrella に登録してキーを作る
提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。
パソコン版 Claude アプリの設定ファイルを開く
SettingsDeveloperEdit Config
この設定を貼り付けて保存
{ "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } }キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
Claude を終了してもう一度開く
試してみる
Cisco Umbrella を使って、私に何ができるか教えて、1 つやってみせて✓ Claude が Cisco Umbrella を使っていると言うか、回答に Cisco Umbrella のツール名が出れば接続成功です
追加の設定 2 項目(入力しなくても使えます)
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
MCP_TRANSPORTサーバーのトランスポートモード。ローカルの CLI 利用では 'stdio' に設定します。イメージはゲートウェイホスティング用に既定で 'http' になります。· 初期値 stdio英語の原文を見る
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVELログの詳細度:debug、info、warn、error· 初期値 info英語の原文を見る
Log verbosity: debug, info, warn, error
説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
ChatGPT はまだ Cisco Umbrella につなげません
Cisco Umbrella はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません
代わりにできること
A · Cisco Umbrella につなげるアプリを使う
- Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
- Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
- Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
- Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
B · 開発者ツール の中で ChatGPT につなげる別のサーバー
同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code につなげますが、先に準備が必要です
Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Claude Code に MCP server Cisco Umbrella を入れてください。順番に:1) docker --version で Docker があるか確認。なければ https://www.docker.com/products/docker-desktop/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Cisco Umbrella のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
Docker を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
docker --version- バージョン番号(例 Docker version …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: Docker Desktop を入れます:Mac は Docker.dmg を開いてアイコンを「アプリケーション」へドラッグ(Mac に合わせて Apple silicon か Intel を選ぶ)· Windows は Docker Desktop Installer.exe をダブルクリック · 入れたら Docker Desktop アプリを開いたままにします。curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
docker --version一度入れれば、Docker を使うすべてのツールで使えます
Cisco Umbrella に登録してキーを作る
提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。
ターミナルを開く
Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く
このコマンドを貼り付けて Enter
claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3Enter の前に「your-value」を自分のキーに書き換えてください
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
Claude Code で /mcp と入力
Cisco Umbrella が一覧にあり、接続済みと表示されれば OK です
試してみる
Cisco Umbrella を使って、私に何ができるか教えて、1 つやってみせて✓ Claude Code が Cisco Umbrella を使っていると言うか、回答に Cisco Umbrella のツール名が出れば接続成功です
追加の設定 2 項目(入力しなくても使えます)
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
MCP_TRANSPORTサーバーのトランスポートモード。ローカルの CLI 利用では 'stdio' に設定します。イメージはゲートウェイホスティング用に既定で 'http' になります。· 初期値 stdio英語の原文を見る
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVELログの詳細度:debug、info、warn、error· 初期値 info英語の原文を見る
Log verbosity: debug, info, warn, error
説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Cursor につなげますが、先に準備が必要です
Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの Cursor に MCP server Cisco Umbrella を入れてください。順番に:1) docker --version で Docker があるか確認。なければ https://www.docker.com/products/docker-desktop/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Cisco Umbrella のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
Docker を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
docker --version- バージョン番号(例 Docker version …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: Docker Desktop を入れます:Mac は Docker.dmg を開いてアイコンを「アプリケーション」へドラッグ(Mac に合わせて Apple silicon か Intel を選ぶ)· Windows は Docker Desktop Installer.exe をダブルクリック · 入れたら Docker Desktop アプリを開いたままにします。curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
docker --version一度入れれば、Docker を使うすべてのツールで使えます
Cisco Umbrella に登録してキーを作る
提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。
キーを入力
Cisco Umbrella の設定で CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE が空です。自分のキーを入れて保存します
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
Cursor の AI チャットを Agent モードで開く
試してみる
Cisco Umbrella を使って、私に何ができるか教えて、1 つやってみせて✓ Cursor が Cisco Umbrella を使っていると言うか、回答に Cisco Umbrella のツール名が出れば接続成功です
追加の設定 2 項目(入力しなくても使えます)
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
MCP_TRANSPORTサーバーのトランスポートモード。ローカルの CLI 利用では 'stdio' に設定します。イメージはゲートウェイホスティング用に既定で 'http' になります。· 初期値 stdio英語の原文を見る
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVELログの詳細度:debug、info、warn、error· 初期値 info英語の原文を見る
Log verbosity: debug, info, warn, error
説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
VS Code につなげますが、先に準備が必要です
Cisco Umbrella のキーが必要です(提供元のサイトで作成) · 先にパソコンへ Docker を入れてください(1 回だけ)
AI にインストールしてもらう
このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。
このパソコンの VS Code に MCP server Cisco Umbrella を入れてください。順番に:1) docker --version で Docker があるか確認。なければ https://www.docker.com/products/docker-desktop/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "cisco-umbrella": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE は "your-value" のままにして、本当の値は私がファイルかアプリの入力欄に自分で貼るよう伝える。チャットにキーを書かせない。5) 了承した内容を実行し、Cisco Umbrella のツールが本当に表示されるか確認する。このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。
Docker を入れる(まだなければ)
もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter
docker --version- バージョン番号(例 Docker version …)が出る = 入っています。この手順は飛ばせます
- "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
ターミナルの開き方
Mac:⌘ + Space を押し、Terminal と入力して Enter
Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」
まだ入っていない場合: Docker Desktop を入れます:Mac は Docker.dmg を開いてアイコンを「アプリケーション」へドラッグ(Mac に合わせて Apple silicon か Intel を選ぶ)· Windows は Docker Desktop Installer.exe をダブルクリック · 入れたら Docker Desktop アプリを開いたままにします。curl コマンドは不要です
入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です:
docker --version一度入れれば、Docker を使うすべてのツールで使えます
Cisco Umbrella に登録してキーを作る
提供元のサイトで登録し、次の手順で使う API キーを作ります。料金や無料プランは提供元のサイトで確認してください。
キーを入力
Cisco Umbrella の設定で CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE が空です。自分のキーを入れて保存します
キーはアプリの入力欄にだけ貼り付け、チャットに貼ったり人に送ったりしないでください
VS Code の AI チャットを Agent モードで開く
試してみる
Cisco Umbrella を使って、私に何ができるか教えて、1 つやってみせて✓ VS Code が Cisco Umbrella を使っていると言うか、回答に Cisco Umbrella のツール名が出れば接続成功です
追加の設定 2 項目(入力しなくても使えます)
上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。
MCP_TRANSPORTサーバーのトランスポートモード。ローカルの CLI 利用では 'stdio' に設定します。イメージはゲートウェイホスティング用に既定で 'http' になります。· 初期値 stdio英語の原文を見る
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVELログの詳細度:debug、info、warn、error· 初期値 info英語の原文を見る
Log verbosity: debug, info, warn, error
説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります
Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください
JSON 設定は下の「開発者向け」にあります
開発者向け:ターミナルのコマンドと JSON 設定
パソコンにインストール
Claude Code
claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"cisco-umbrella": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"cisco-umbrella": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"cisco-umbrella": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}自分で入力する値
CISCOUMBRELLA_API_KEY秘密 必須 envCisco Umbrella API Key, from Admin > API Keys (or Console Settings > API Keys for Multi-org/MSP) in the Umbrella admin console.CISCOUMBRELLA_API_SECRET秘密 必須 envAPI Key と組み合わせる Cisco Umbrella API Secret。作成時に一度だけ表示され、後から取得することはできません。英語の原文を見る
Cisco Umbrella API Secret paired with the API Key. Shown only once at creation and cannot be retrieved later.MCP_TRANSPORTenvサーバーのトランスポートモード。ローカルの CLI 利用では 'stdio' に設定します。イメージはゲートウェイホスティング用に既定で 'http' になります。英語の原文を見る
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.AUTH_MODE秘密 必須 env認証情報の取得元:'env' はローカルの変数を読み込み、'gateway' は WYRE MCP Gateway によるヘッダー注入を想定します。英語の原文を見る
Credential source: 'env' reads vars locally, 'gateway' expects header injection from the WYRE MCP Gateway.LOG_LEVELenvログの詳細度:debug、info、warn、error英語の原文を見る
Log verbosity: debug, info, warn, error
説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
ひと目でわかる
使えるアプリ
このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。
パソコン上で動かせるアプリ
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
できること
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
基本チェックi
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック
- ✓ 合格
作者とリポジトリが一致
レジストリ名は、リポジトリを所有するGitHubアカウント WYRE-AI で確認済みです
- ✓ 合格
今もメンテナンスされている
コードの最終更新:7 日前
- ! 注意
ライセンスがある
GitHubがライセンスの種類を判別できませんでした。ファイルを開いて確認してください
- – 対象外
エンドポイントが応答する
これはパソコンで動くため、インターネット上のエンドポイントはありません
- – 対象外
OAuthでサインイン
パソコンで動き、代わりにローカルの設定を使います
- … 未チェック
ツールの説明に隠れた指示がない
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける
作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。
[](https://mcp.popnx.com/en/servers/wyre-ai-cisco-umbrella-mcp)話し合い
質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。
ユーザーレビュー
まだレビューはありません
開発者ツールのほかのサーバーとの比較i
- このカテゴリのほかの6182件のうち0%よりスターが多い
- このカテゴリのほかの6182件のうち52%より最近レジストリに公開
- 基本チェックの結果が、このカテゴリのほかの6182件のうち45%と同じかそれ以上
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
よくある質問
Cisco Umbrellaは安全ですか?
当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
どんなキーやコードが必要ですか?
入力が必要なもの:CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE
パソコンで動きますか、それともクラウドですか?
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
今もメンテナンスされていますか?
GitHubリポジトリの最終更新は7 日前、最新バージョン(1.0.3)がレジストリに届いたのは28 日前です。
どのアプリで使えますか?
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにDockerも必要です。
代わりに使えるものは?
同じカテゴリには:GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
似た働きのほかの候補
同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| これ Cisco Umbrella | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 動く場所 | パソコンにインストールが必要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドで動き、インストール不要 | クラウドでもパソコンにインストールでも使える |
| キーが必要 | はい | いいえ | いいえ | いいえ | いいえ | いいえ |
| Claude で + から追加 | いいえ | いいえ | いいえ | はい | いいえ | いいえ |
| 基本チェック | 2/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| ライセンス | NOASSERTION | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 料金 | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし | 登録情報に費用の記載なし |
作者のREADME
READMEを開く
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
Cisco Umbrella MCP Server
MCP server for Cisco Umbrella's NextGen REST API - deployment inventory, admin, policy, reporting, and investigate visibility - for AI assistants and the WYRE Conduit gateway.
Authentication
Create an API Key in the Umbrella admin console (Admin > API Keys, or Console Settings > API Keys on a Multi-org/MSP console) to receive an API Key and API Secret pair.
The secret is shown only once at creation time and cannot be retrieved later - store it somewhere safe immediately.
This server exchanges that pair for a short-lived (1-hour) Bearer access token via POST /auth/v2/token (grant_type=client_credentials, HTTP Basic auth), and handles the exchange and its refresh on expiry internally. Callers only ever need to supply the long-lived API Key/Secret below.
A note on a real discrepancy in Cisco's own documentation: Cisco's published Postman collection (CiscoDevNet/cloud-security, Umbrella/PostmanExamples/umbrella-external-postman-collection.json) encodes the token request as a bare GET with no body, while Cisco's DevNet "Getting Started" and "Quickstart" prose docs both independently specify POST with a grant_type=client_credentials form body. This server follows the prose docs (POST), since two independent doc pages agree and it matches the standard OAuth2 client_credentials flow Cisco names explicitly - but this was not verified against a live credential pair. If token exchange 401s against a real account, try a bare GET with no body before assuming the credentials are bad.
Configuration
Copy .env.example and set the variables below. The stdio transport reads CISCOUMBRELLA_* and does not use CONDUIT_S2S_SECRET.
| Env var | Description | |||
|---|---|---|---|---|
CISCOUMBRELLA_API_KEY | API Key from the Umbrella admin console. Required for stdio and AUTH_MODE=env. Not read in gateway mode. | |||
CISCOUMBRELLA_API_SECRET | API Secret paired with the API Key. Shown only once at creation. Required for stdio and AUTH_MODE=env. Not read in gateway mode. | |||
MCP_TRANSPORT | stdio (default) or http. | |||
AUTH_MODE | env (default, reads the vars above) or gateway (Docker image and Compose default). Gateway mode requires X-CiscoUmbrella-Api-Key and X-CiscoUmbrella-Api-Secret on each /mcp request and never falls back to CISCOUMBRELLA_*. | |||
CONDUIT_S2S_SECRET | Required for HTTP. HMAC secret checked against X-Gateway-S2S on /mcp. Generate with openssl rand -hex 32. If empty or a known placeholder, the HTTP server logs an error and exits non-zero. The value is never logged. | |||
MCP_ALLOW_INSECURE_DEV | Set to exactly 1 to start HTTP without CONDUIT_S2S_SECRET. Logs a warning, does not enforce X-Gateway-S2S, and binds 127.0.0.1 only. A non-loopback MCP_HTTP_HOST refuses to start. A known placeholder secret is still refused. Local development only. | |||
MCP_HTTP_HOST | Bind address when MCP_TRANSPORT=http. Defaults to 127.0.0.1. A configured CONDUIT_S2S_SECRET honors this value. The container image sets 0.0.0.0. | |||
MCP_HTTP_PORT | HTTP port. Defaults to 8080. | |||
LOG_LEVEL | debug \ | info (default) \ | warn \ | error. |
/health and /healthz stay unauthenticated and do not read credentials.
HTTP authentication
With MCP_TRANSPORT=http and CONDUIT_S2S_SECRET set, every /mcp request must include X-Gateway-S2S. The check is verifyS2sHeader in src/s2s-verify.ts: the header value is t= ,v1= , where the hex is HMAC-SHA256 of the literal string t= keyed with CONDUIT_S2S_SECRET (64 lowercase hex characters). The timestamp must be within 300 seconds of the server clock. A missing or invalid header is HTTP 401, before vendor credentials are read. An empty secret refuses to start unless MCP_ALLOW_INSECURE_DEV=1. A known placeholder (replace-with-a-real-secret, your-s2s-secret, changeme, change-me, placeholder, secret, example, replace-me, s2s-secret, any case) refuses to start even with that flag, so a copied example cannot forge the header.
TS=$(date +%s)
SIG=$(printf 't=%s' "$TS" | openssl dgst -sha256 -hmac "$CONDUIT_S2S_SECRET" -hex | awk '{print $NF}') curl -sS http://127.0.0.1:8080/mcp \ -H 'Content-Type: application/json' \ -H 'Accept: application/json, text/event-stream' \ -H "X-Gateway-S2S: t=${TS},v1=${SIG}" \ -H "X-CiscoUmbrella-Api-Key: $CISCOUMBRELLA_API_KEY" \ -H "X-CiscoUmbrella-Api-Secret: $CISCOUMBRELLA_API_SECRET" \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list"}'
In AUTH_MODE=gateway, /mcp also requires both X-CiscoUmbrella-Api-Key and X-CiscoUmbrella-Api-Secret. Those headers are the only credential source for that request. A request missing either one returns 401 and does not fall back to CISCOUMBRELLA_* in the process environment.
AUTH_MODE=env still requires a valid X-Gateway-S2S header, then uses CISCOUMBRELLA_API_KEY and CISCOUMBRELLA_API_SECRET from the environment.
Request limits
- HTTP request bodies are capped at 256 KiB (262144 bytes). After the
X-Gateway-S2Scheck passes, aContent-Lengthabove the cap returns 413 with a JSON-RPC error; bodies withoutContent-Lengthare capped by the MCP SDK transport. Unauthenticated requests still get 401 first. tools/callarguments are capped at 10,000 elements (every array item and object key at any depth). Larger inputs return anisErrortool result and are never dispatched.
These limits address CVE-2026-111768 / GHSA-46jr-4wx8-v453 (memory exhaustion during validation) and GHSA-f897-62hf-6gxq (no request body / batch cap).
Tools
Deployments
umbrella_list_networks- list registered public-IP network identities.umbrella_list_internal_networks- list internal (RFC1918) network identities.umbrella_list_sites- list Umbrella sites.umbrella_list_virtual_appliances- list virtual appliances and their status.umbrella_list_roaming_computers- list roaming-client-enrolled computers.umbrella_get_internal_domains- get all internal domains configured to bypass Umbrella DNS.
Admin
umbrella_list_roles- list administrative roles.umbrella_list_users- list admin console users.umbrella_get_user- get a specific admin console user.umbrella_list_api_keys- list configured API keys.
Policies
umbrella_list_destination_lists- list destination (allow/block) lists.umbrella_list_destinations- list destinations within a specific destination list.
Reports
umbrella_top_destinations- most-requested destinations, optionally by traffic type (dns/proxy/firewall).umbrella_total_requests- total request counts, optionally by traffic type.umbrella_top_categories- most-requested content/security categories.umbrella_activity- raw activity log, optionally by traffic type.umbrella_identities- identities (roaming/network/mobile/AD users) with traffic summaries.umbrella_appdiscovery_applications- discovered cloud applications.umbrella_appdiscovery_app_identities- identities observed using a discovered application.umbrella_appdiscovery_app_risk- risk details for a discovered application.umbrella_api_usage_summary/umbrella_api_usage_requests/umbrella_api_usage_responses/umbrella_api_usage_keys- API usage reporting.
Investigate
umbrella_domain_categorization- content/security categorization for a domain.umbrella_domain_risk_score- Cisco's risk score for a domain.umbrella_domain_security_score- detailed security scoring signals for a domain.umbrella_top_most_seen_domains- the top million most globally-popular domains.umbrella_get_samples- malware/file samples for a domain, IP, or URL.umbrella_domain_volume- DNS query volume over time for a domain.umbrella_domain_resource_records- passive DNS resource records for a domain.
Every Reports/Investigate/Deployments/Admin/Policies list tool that Cisco's docs don't fully enumerate the filter set for accepts an optional additionalParams object, passed through verbatim as extra query-string parameters (e.g. categories, identityids, verdict, domains on Reports endpoints) - documented Cisco filters this client doesn't model as first-class arguments.
Scope
This is a v1, read-only surface: this server only implements GET endpoints across Deployments, Admin, Policies, Reports, and Investigate. Explicitly deferred, all real endpoints in Cisco's own Postman collection, out of scope for now:
- Add/remove internal domains (
POST/DELETE /deployments/v2/internaldomains) - Add/remove tunnels (
POST/DELETE /deployments/v2/tunnels) - Add tags and tag/untag devices (
POST /deployments/v2/tags*) - Create/delete users (
POST/DELETE /admin/v2/users) - Create API keys (
POST /admin/v2/apiKeys) - Add/remove destinations on a destination list (
POST/DELETE /policies/v2/destinationlists/{id}/destinations) - Update an App Discovery application's label (
PATCH /reports/v2/appDiscovery/applications/{id})
These are provisioning/mutation actions, out of scope for a read-only monitoring connector - consistent with how other connectors in this wave (Printix, WatchGuard Cloud) deferred provisioning-heavy writes. They can be added as a follow-up if a write-capable v2 is ever needed.
Also explicitly out of scope: the Legacy Umbrella Reporting v1/v2 APIs (different auth, different host - investigate.api.umbrella.com / management.api.umbrella.com) and any Multi-org/MSP child-organization switching via the X-Umbrella-OrgId header - real, documented Cisco behavior, but not covered in enough concrete request/response detail (whether it applies to the token request, every subsequent request, or both) to implement with confidence without a live credential pair to verify against.
Development
npm install
npm run build npm test npm run lint # tsc --noEmit
Docker
The image listens on 0.0.0.0 inside the container (MCP_HTTP_HOST) and defaults to AUTH_MODE=gateway. Startup still refuses to run without a real CONDUIT_S2S_SECRET. Publish the port on loopback. In gateway mode, Umbrella credentials arrive on each request as headers; they are not read from the environment.
docker build -t cisco-umbrella-mcp .
docker run \ -e CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \ -p 127.0.0.1:8080:8080 \ cisco-umbrella-mcp
Compose refuses to start when CONDUIT_S2S_SECRET is unset, defaults AUTH_MODE to gateway, publishes 127.0.0.1:8080:8080, and does not set CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, or env_file:
CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" docker compose up
Single-tenant HTTP (AUTH_MODE=env) still requires the S2S secret, then uses CISCOUMBRELLA_API_KEY and CISCOUMBRELLA_API_SECRET. It is separate from the gateway Compose service above.
docker run \
-e CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \ -e AUTH_MODE=env \ -e CISCOUMBRELLA_API_KEY=... \ -e CISCOUMBRELLA_API_SECRET=... \ -p 127.0.0.1:8080:8080 \ cisco-umbrella-mcp
Local HTTP without a secret is development-only. It binds 127.0.0.1 (including when MCP_HTTP_HOST is localhost or ::1) and logs a warning. A non-loopback MCP_HTTP_HOST makes startup exit. The container image sets MCP_HTTP_HOST=0.0.0.0, so the bypass inside Docker also needs -e MCP_HTTP_HOST=127.0.0.1. Do not publish that port off loopback.
MCP_TRANSPORT=http MCP_ALLOW_INSECURE_DEV=1 npm run start:http