ต้นแบบ · รุ่นทดลอง: มีทุก server ในทะเบียนทางการ อัปเดตทุก 30 นาที รีวิวและบัญชีผู้ใช้จะมาในขั้นถัดไป
PopNx MCPที่รวม MCP สำหรับคนใช้ AI · อธิบายเป็นภาษาคน

Pitbridge

โดย ToolstackVaultรุ่น 0.2.2i★ –iรันบนเครื่อง
ชื่อใน registrycom.pitbridge/pitbridge

ติดตั้ง

ภาพรวม

คำอธิบายจากผู้ทำ (ภาษาอังกฤษตามต้นฉบับ)

Local-first MCP bridge for NinjaTrader 8 behind a deterministic guardrail engine.

สามเสาของ PopNx MCP

สามเรื่องนี้ไม่รวมเป็นคะแนนเดียว เพราะความเห็น การวัด และความนิยม เป็นคนละเรื่องกัน

ใช้ทำอะไรได้

ตัวนี้ยังไม่ได้เรียบเรียงเป็นภาษาไทย ด้านล่างคือข้อเท็จจริงที่เราอ่านจาก registry

  • การเชื่อมต่อ: รันบนเครื่อง
  • ช่องทาง (transport): stdio
  • หมวด: อื่น ๆ

ติดตั้ง

เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง

ก่อนติดตั้ง

ต้องเตรียมก่อน

  • PyPIติดตั้ง uv ของ Python (มีคำสั่ง uvx) ในเครื่อง

คุณใช้แอปไหน

เลือกแอปด้านบน เราจำไว้ให้ ครั้งหน้าปุ่มจะขึ้นว่า “ติดตั้งลง …”

เปิด Claude Desktop → Settings → Developer → Edit Config แล้ววางค่านี้ในไฟล์ claude_desktop_config.json

{
  "mcpServers": {
    "pitbridge": {
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

พิมพ์คำสั่งนี้ใน Terminal

claude mcp add pitbridge -- uvx pitbridge mcp

เปิดใน Cursor

หรือคัดลอกค่าตั้งเอง

วางในไฟล์ .cursor/mcp.json ของโปรเจกต์ หรือ ~/.cursor/mcp.json

{
  "mcpServers": {
    "pitbridge": {
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

เบราว์เซอร์จะถามก่อนเปิดแอป จากนั้นแอปแสดงค่าตั้งให้ตรวจแล้วกดยืนยัน ช่อง key เว้นว่างไว้ให้คุณใส่เอง

เปิดใน VS Code

หรือคัดลอกค่าตั้งเอง

วางในไฟล์ .vscode/mcp.json ของโปรเจกต์

{
  "servers": {
    "pitbridge": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

เบราว์เซอร์จะถามก่อนเปิดแอป จากนั้นแอปแสดงค่าตั้งให้ตรวจแล้วกดยืนยัน ช่อง key เว้นว่างไว้ให้คุณใส่เอง

ตัวนี้รันในเครื่องคุณ แต่ ChatGPT ต่อได้เฉพาะ server บนอินเทอร์เน็ต ลองเลือกแอปอื่น

ตัวเลือกเก็บในคุกกี้บนเครื่องนี้ ไม่ต้องมีบัญชี

ค่าตั้งนี้สร้างจากข้อมูลใน registry ของผู้ทำ ถ้าไม่ตรงกับ README ให้เชื่อ README

ทำอะไรได้บ้าง

รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง

ผลตรวจเบื้องต้นi

เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 6 พ.ย. 2569

  • ✓ ผ่าน

    ตัวตนผู้ทำตรงกับ repo

    ชื่อใน registry ยืนยันโดเมน pitbridge.com แล้ว (registry ตรวจความเป็นเจ้าของโดเมน)

  • … ยังไม่ตรวจ

    ยังมีคนดูแล

    ยังไม่ได้อ่านข้อมูล repo จาก GitHub

  • … ยังไม่ตรวจ

    มีสัญญาอนุญาต (license)

    ยังไม่ได้อ่านข้อมูล repo จาก GitHub

  • – ไม่เกี่ยว

    endpoint ตอบ

    ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต

  • – ไม่เกี่ยว

    ล็อกอินแบบ OAuth

    ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน

  • … ยังไม่ตรวจ

    คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง

    รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต

เทียบกับตัวอื่นในหมวด อื่น ๆi

  • ดาวมากกว่า 0% ของอีก 32403 ตัวในหมวดนี้
  • ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 17% ของอีก 32403 ตัวในหมวดนี้
  • ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 100% ของอีก 32403 ตัวในหมวดนี้

เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo

คำถามที่พบบ่อย

Pitbridge ปลอดภัยไหม?

จากการตรวจเบื้องต้นของเรา ผ่าน 1 จาก 1 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น

ต้องใช้กุญแจหรือรหัสอะไรบ้าง?

registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก

ตัวนี้รันบนเครื่องหรือบนคลาวด์?

รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)

ยังมีคนดูแลอยู่ไหม?

repo บน GitHub มีการแก้โค้ดล่าสุด – และส่งรุ่นล่าสุด (0.2.2) เข้า registry 4 เดือนที่ผ่านมา

ใช้กับโปรแกรมไหนได้บ้าง?

โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code ตัวนี้ต้องมี Python (uv) ในเครื่องด้วย

มีตัวไหนใช้แทนได้บ้าง?

ในหมวดเดียวกันมี Spec Driven Development, Remote Desktop Commander, LickityClick

ตัวที่ใช้แทนได้

server หมวดเดียวกันจากผู้ทำคนอื่น เรียงตามดาว

อ่านการ์ด:★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi

Spec Driven Development

โดย formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

รันบนเครื่อง★ 440MITอัปเดต 14 เดือนที่ผ่านมา
ติดตั้ง

Remote Desktop Commander

โดย desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

รันบนคลาวด์★ 211อัปเดต เมื่อวาน
ติดตั้ง

LickityClick

โดย lickity.click

Create, edit and track LickityClick short links, campaigns and click stats from your AI assistant.

บนเครื่องหรือคลาวด์อัปเดต วันนี้
ติดตั้ง

README จากผู้ทำ

เปิดอ่าน README

ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ

PitBridge

A local-first MCP bridge for NinjaTrader 8, with hard risk limits your AI cannot bypass.

PitBridge connects an AI agent (Claude Code, Claude Desktop, or your own script) to a NinjaTrader 8 futures account through a daemon that runs on your own machine. Every order the agent asks for passes through a deterministic guardrail engine first. The guardrails are default-on, they live in code rather than in prompts, and the agent has no tool to weaken them, unlock live trading, or release the kill switch.

We build rails, not alpha. PitBridge does not tell you what to trade.

What it is

  • A local-first daemon (Python 3.12) that speaks MCP (stdio and streamable HTTP), a REST API, and a WebSocket event feed. It runs on macOS, Linux, or Windows.
  • A deterministic guardrail engine: pure, synchronous checks (daily-loss halt, position caps, trading windows, rate limits, a kill switch, and more) that every order must pass before it can reach the broker.
  • A thin NinjaTrader 8 AddOn (C#) that connects out to the daemon and places orders through the official NinjaTrader.Cbi Account API. The AddOn is deliberately dumb: all safety lives in the daemon.
  • An append-only, hash-chained audit log that records every request, decision, and outcome, and can tell you exactly why any order was allowed or blocked.

What it is NOT

Read this section before anything else.

  • Not a broker or an exchange. PitBridge routes orders you (or your agent) create to your existing NinjaTrader account. It holds no funds and executes nothing itself.
  • Not signals, strategies, or alpha. PitBridge ships no trading logic. It will not tell you what, when, or how much to trade. That is your job, or your agent's.
  • Not financial or investment advice. It is trading infrastructure.
  • Not a guarantee of prop-firm compliance. You configure the limits that match your firm's rules. PitBridge helps you encode and enforce them locally, but you remain responsible for staying within your firm's terms. We make no compliance guarantee.
  • Not a cloud order relay. Orders, keys, and positions never touch our servers. There is no PitBridge account in the order path.
  • Not autonomous. Enabling live execution is an operator-only ritual at the command line. The agent cannot arm live trading, and it cannot lift a kill.

Architecture

The entire order path is local. PitBridge's own cloud (the marketing site, the docs, software updates) is never in it.

   AI agent   (Claude Code / Claude Desktop / your own script)

│ │ MCP (stdio or HTTP) REST /v1/* WS events ▼ PitBridge daemon ← runs on YOUR machine │ │ frozen pipeline (no code path skips it): │ schema → permission → GUARDRAILS → confirm → submit → audit ▼ Guardrail engine (deterministic, default-on, not reconfigurable by the agent) │ │ WebSocket on :8873 (the AddOn dials OUT; the NT8 box never listens) ▼ NT8 AddOn (C#, .NET 4.8, next to NinjaTrader 8 on Windows) │ │ NinjaTrader.Cbi Account API (close / flatten are strictly reduce-only) ▼ NinjaTrader 8 → your broker / prop account (CQG, Rithmic, ...)

PitBridge's own cloud is NOT on this path. Orders, keys, and positions never leave your machine(s).

Two run modes:

  • Localhost (default): the daemon and NinjaTrader run on the same Windows machine, bound to 127.0.0.1.
  • Paired: the daemon runs on, for example, your Mac, and the NinjaTrader AddOn connects out to it over your own private network (Tailscale / LAN). This is the "runs on your Mac, your Windows box, or both" setup. Non-localhost binds are refused unless paired mode is explicitly enabled and a pairing token is configured.

Safety model in short

  • Deterministic guardrails. The engine is a set of pure functions with no I/O and no LLM in the loop: check(request, state, now) returns Allow, Block (with a typed reason code), or RequireConfirm. Given the same inputs it always returns the same decision, and that decision is testable.
  • A frozen pipeline. Every order takes exactly one path: schema validation, then permission (read-only / paper / live), then the guardrail chain, then an optional human-confirm gate, then submit, then an audit append. There is no route from the agent surface to the broker that skips it. A structural test in CI fails the build if any code tries.
  • The agent cannot reconfigure safety. Limits live in an on-disk config that is checksum-verified. No MCP tool can edit config, raise a limit, un-kill, or arm live trading. Those controls exist only at the operator's command line.
  • Local-first. The daemon runs on your machine(s). Orders, keys, and positions never reach a PitBridge server.
  • Kill switch. A file, the CLI, or a REST call can engage it instantly. Only the CLI (a human at the keyboard) can release it. De-risking (cancel, close, flatten) is deliberately still allowed under a kill, so you can always get flat.
  • Tamper-evident audit log. Append-only, hash-chained JSONL with an out-of-file anchor. pitbridge audit why explains any order; pitbridge audit verify proves the chain is intact and catches edits, truncation, or a wiped tail.

The guardrails

Twelve v0 guardrails, each its own module, all table-tested. The chain runs in a frozen order: the kill switch is checked first, the human-confirm gate last.

  1. Kill switch: file, CLI, or REST engages it; release is CLI-only, never an agent tool.
  2. Daily-loss halt: per-account day ledger with New-York rollover; can latch sticky for the rest of the day once breached.
  3. Profit lock: stop trading for the day after a configured profit.
  4. Max contracts per order: reject any single order above the cap.
  5. Max position per instrument and account: cap net exposure, and refuse an over-cap position flipping to an equally over-cap opposite side.
  6. Instrument allowlist: only configured contracts may be traded.
  7. Trading windows and holiday calendar: per-account timezone, holiday and early-close aware.
  8. Cooldown: a minimum spacing after a loss and/or after an order.
  9. Order rate limits: caps per minute, per hour, and per day.
  10. Duplicate-order protection: same account, instrument, side, and quantity within N seconds is rejected.
  11. Link-down block: if the heartbeat to the AddOn goes stale, new orders hard-reject rather than queue against a dead link.
  12. Human-confirm gate: parks an order as PENDING_CONFIRM, pings a notifier, and waits for pitbridge confirm (or a REST approval); auto-rejects after 60 seconds.

Open-core boundary

PitBridge is open-core. The safety kernel is open so it can be read and trusted. Live execution and the operational suite for running many accounts are the paid tier.

Open source (free)Pro (paid)
The daemon and the full guardrail engineLive-execution unlock (the private LiveExecutionProvider plugin)
The MCP, REST, and WebSocket agent surfaceThe advanced guardrail suite and prop-firm rule packs
Read-only tools and paper trading (against the fake AddOn / simulation)Multi-account fan-out (one tool call, N accounts)
The CLI and the hash-chained audit logThe human-confirm UI and audit export

This is licensing-gating, not DRM. The core is fully functional for read-only and paper use on its own. Live trading requires the Pro plugin plus a deliberate, operator-only arm-live step.

Quickstart

You can run the complete daemon on a Mac today, with no NinjaTrader install, no Windows box, and no market data. A fake AddOn simulator stands in for the real C# AddOn, so you can watch the guardrails pass good orders, block bad ones with a typed reason, stop everything with the kill switch, and explain every decision from the audit log.

cd daemon

uv sync --extra dev uv run pitbridge run --config ./config.toml # terminal A uv run python ../tools/fake_addon.py \ # terminal B --host 127.0.0.1 --port 8873 --token pb_pair_demo --account Sim101

Then place a paper order over REST or wire up Claude as the MCP client and ask it in plain language. The full walkthrough, a ready-to-paste config, the Claude Desktop / Claude Code MCP setup block, five test scenarios, and a "try to break it" section are in [docs/testing-on-mac.md](docs/testing-on-mac.md).

Everything in the quickstart is paper / simulation. See that guide's "What this does and does not prove" for the honest boundary.

Status and roadmap

PitBridge is early and pre-launch. We are honest about what exists versus what is planned.

Built and tested today (paper / simulation only):

  • the daemon core, the full guardrail engine (all twelve guardrails), the day ledger, and the hash-chained audit log;
  • the MCP server (nine tools), the REST API, the WebSocket event feed, and the CLI;
  • a scripted fake AddOn for end-to-end and chaos testing;
  • a table-driven test suite (300+ tests) that runs on macOS, Linux, and Windows in CI, including prompt-injection and no-bypass tests.

In progress:

  • the real C# NinjaTrader 8 AddOn (order routing on a Sim101 account), with close and flatten implemented as strictly reduce-only.

Planned:

  • shadow-mode validation, running PitBridge in parallel with our own live prop-trading operation to prove order-intent parity before it ever routes a live order;
  • a supervised, operator-gated live migration;
  • the open-core public launch, the website, and full docs;
  • additional platforms (Tradovate, ProjectX / TopstepX) via thin adapters.

No live account has been traded through PitBridge yet. Live routing sits behind an operator-only ritual and is not part of the current build.

Documentation

  • docs/architecture.md: the binding architecture and safety spec.
  • docs/testing-on-mac.md: run and test the daemon on a Mac against the fake AddOn.
  • SECURITY.md: how to report a vulnerability.
  • CONTRIBUTING.md: how to contribute, and the rules for safety-critical changes.

Disclaimers

Trademarks. NinjaTrader is a registered trademark of NinjaTrader Group, LLC. CQG, Rithmic, and any prop-firm names are trademarks of their respective owners. PitBridge is an independent project and is not affiliated with, endorsed by, or sponsored by NinjaTrader Group, LLC, any data or clearing provider, or any prop firm. Platform names are used nominatively, only to describe compatibility.

Not financial advice. PitBridge is trading infrastructure, not financial, investment, or trading advice. It provides no signals, strategies, or recommendations.

Risk. Trading futures involves substantial risk of loss and is not suitable for every investor. You are solely responsible for your own trading decisions and for staying within the terms of any broker or prop firm you use.

CFTC Rule 4.41 (hypothetical and simulated performance). Any results, examples, or simulated data shown for PitBridge are hypothetical or simulation-based. Simulated performance has inherent limitations: unlike a live record, simulated results do not represent actual trading, and because the trades were not actually executed, they may under- or over-compensate for factors such as lack of liquidity. No representation is being made that any account will or is likely to achieve profits or losses s

ตัดมาแค่ช่วงต้น อ่านต่อใน repo

ถาม PopNx