GeoSphere Austria Weather

geosphere-mcp-server

MCP server for weather: current conditions, hourly forecasts, storm outlooks, and air quality for Austria and the Alpine region, via the Model Context Protocol.

It serves high-resolution GeoSphere Austria data — the 1 km numerical forecast (nwp-v2-1h-1km, the deterministic run of the C-LAEF AlpeAdria ensemble, called AROME here), the INCA analysis/nowcast, the C-LAEF ensemble for the precipitation-chance estimate and a thunderstorm signal, and the WRF-Chem air-quality forecast. There is no worldwide fallback: a point outside the AROME grid returns an out-of-coverage notice, so pair this with a global weather source if you need one. Every response states which datasets produced it.

Output is compact emoji-markdown with metric units — built for smart-home and voice-assistant LLM pipelines where a terse, readable answer beats a JSON blob. Weather conditions follow GeoSphere's own weather symbol and are reported with the Home Assistant condition vocabulary (sunny, clear-night, partlycloudy, cloudy, fog, rainy, pouring, snowy, snowy-rainy, lightning-rainy); for the current condition, observations decide whether and what is falling.

Coverage

Coverage is decided by the API, not by a bounding box you configure: GeoSphere answers HTTP 400 for a point outside the grid, and the server renders that as

⚠️ Outside coverage — this server only serves Austria and the Alpine region.

That line is deliberately distinct from the transient failures (⚠️ Timeout…, ⚠️ No weather data available): being outside coverage is a permanent property of the location, so retrying will never help. It names no grid on purpose — the forecast tools query the 1 km forecast grid and get_air_quality queries WRF-Chem (3 km), so a point can be inside one and outside the other.

There is no multi-day forecast. GeoSphere publishes nothing beyond the forecast run's ~60 h, and a run is only available several hours after its start, so the longest answer this server can give is typically 52–55 hours of hourly rows.

Installation

Pass decimal latitude/longitude to every tool. There is no geocoder in the server — the calling LLM geocodes city names to coordinates itself.

Claude Desktop

Add to your Claude Desktop config (~/Library/Application Support/Claude/claude_desktop_config.json):

{

"mcpServers": { "geosphere": { "command": "uvx", "args": ["geosphere-mcp-server"] } } }

Claude Code

claude mcp add geosphere -- uvx geosphere-mcp-server

From source (development)

{

"mcpServers": { "geosphere": { "command": "uvx", "args": ["--from", "/path/to/geosphere-mcp-server", "geosphere-mcp-server"] } } }

Home Assistant

It is a standard stdio MCP server, so it runs anywhere an stdio MCP server can be hosted — including alongside Home Assistant's Assist pipeline (register it the same way as any other stdio MCP server). Give the voice agent the coordinates of the places it should answer for, or let it geocode names.

Tools

get_current_weather

Current conditions for a point, from INCA, the 15-minute nowcast, and AROME. The nowcast decides whether and what is falling; the rest of the condition is GeoSphere's weather symbol for the current hour, so with nothing falling under a rain or thunder symbol it reads cloudy.

# Current Weather at 48.2208, 16.3738

🌡️ Temperature: 24.7°C (feels like 24.2°C) 🌤️ Condition: partlycloudy 💧 Humidity: 52% 💨 Wind: 2.9 m/s from 135° (gusts 7 m/s) 🌧️ Precipitation (last hour): 0 mm 📊 Pressure: 1016 hPa ☁️ Cloud cover: 30% 🕐 Timezone: Europe/Vienna (CEST) 📡 Source: GeoSphere (INCA + nowcast + AROME) — observed 15:20

get_hourly_forecast

Hour-by-hour forecast from AROME, up to ~60 h. Each hour's condition is GeoSphere's weather symbol; the precipitation chance is an estimate derived from the C-LAEF ensemble percentiles (stepped 0/30/70/95 %), not a probability GeoSphere publishes.

# 3-Hour Forecast for 48.2208, 16.3738

AROME model, reference 2026-07-22 12:00 CEST · Source: GeoSphere (AROME + C-LAEF ensemble)

Wed 2026-07-22 15:00: 24.7°C — partlycloudy, wind 3 m/s, snow limit 3410 m 16:00: 23.9°C — rainy, 1.2 mm (70% chance), wind 4 m/s, snow limit 3380 m 17:00: 22.5°C — cloudy, wind 3 m/s, snow limit 3350 m

Precipitation chance is an estimate derived from the C-LAEF ensemble percentiles (0/30/70/95 %), not a probability GeoSphere publishes.

The hours are grouped under a day-divider header (%a %Y-%m-%d in the point's local timezone) that repeats whenever the local date changes, so a window crossing midnight stays unambiguous. Requesting more hours than the AROME horizon provides appends a note naming where the horizon ends — there is nothing further ahead to reach for. Dry hours, and hours whose amount rounds to 0 mm, omit the precipitation and chance parts; the estimate note appears only when a chance is shown. Each hour ends with the forecast snow limit in metres, omitted when the run has none.

get_storm_outlook

Severe-weather outlook: peak gusts and thunderstorm timing. Reports figures, never a severity verdict — what counts as dangerous is the caller's judgement.

# Storm Outlook for 48.2208, 16.3738

AROME model, reference 2026-08-10 14:00 CEST · Source: GeoSphere (AROME + C-LAEF ensemble)

💨 Max gust next 1 h: 12 m/s (at Mon 2026-08-10 17:00) 💨 Max gust next 12 h: 24 m/s (at Mon 2026-08-10 20:00) ⛈️ Thunderstorm expected next 1 h: no ⚡ Next thunderstorm: Mon 2026-08-10 20:00 (signal: symbol) 🌡️ Max CAPE next 12 h: 1800 J/kg 🕐 Timezone: Europe/Vienna (CEST)

Horizons round up to whole hours: the "1 h" window covers the hour already under way plus the next one. A thunderstorm timestamp at or before now means one is already in progress. A thunderstorm hour is one whose GeoSphere weather symbol is a thunderstorm, or where the C-LAEF ensemble's 90th percentiles reach 1000 J/kg CAPE and 0.1 mm precipitation; signal names which fired (symbol, ensemble or both). Max CAPE is a diagnostic and decides nothing.

Three behaviours are worth knowing before you build on this:

• Horizons round up to whole hours. The window starts at the top of the current hour, so the "next 1 h" figure covers the hour already under way *plus* the next one, and can report an event up to ~2 h out. Compare the returned timestamps yourself if you need a strict 60-minute answer.
• `Next thunderstorm` can be in the past, by up to 59 minutes, when the storm hour is the one already under way. That means a storm is in progress — clamp a negative lead time to zero rather than assuming the stamp is in the future.
• An all-clear names its horizon (none in the next 54 h). The run nominally covers ~60 h, but it is published hours after its start and a stale or truncated run reaches less far, so the span is measured from the rows actually returned. It is not an all-clear beyond the stated span.

A thunderstorm hour is one whose GeoSphere weather symbol is a thunderstorm (codes 26–32), or one where the C-LAEF ensemble's 90th percentiles reach 1000 J/kg CAPE and 0.1 mm of precipitation — the ensemble counts only while its run is less than 12 h old. Either signal suffices, and every thunderstorm answer names it: signal: symbol, ensemble or both. Without a current ensemble run the outlook says so (ℹ️ Ensemble signal: unavailable …) and rests on the symbol alone. Thunderstorm expected reads unknown (no forecast hours in the window) only when no forecast hour falls in the window; an hour with a missing symbol counts as no storm. Max CAPE is the deterministic run's CAPE, a diagnostic that decides nothing.

get_air_quality

Pollutant concentrations now, plus the European Air Quality Index for today, tomorrow and in two days.

# Air Quality at 48.2208, 16.3738

🏷️ European AQI: 2 (fair) today · 3 (moderate) tomorrow · 2 (fair) in 2 days 🌫️ Concentrations (16:00): NO₂ 18 µg/m³ · O₃ 92 µg/m³ · PM10 21 µg/m³ · PM2.5 12 µg/m³ 🕐 Timezone: Europe/Vienna (CEST) 📡 Source: GeoSphere (WRF-Chem + daily AQI, 3 km)

The AQI is reported as its 1–6 EEA band (1 good … 6 extremely poor), which is what GeoSphere publishes — there is no underlying numeric index to show alongside it. These are model forecasts, not station measurements — expect them to track a nearby monitoring station without matching it.

A point inside the 3 km grid can still come back empty when a WRF-Chem run is stale or incomplete; the response then says No air-quality data available for this location and still names the source, which is a different answer from being out of coverage.

Data sources & attribution

• GeoSphere Austria Dataset API — the 1 km forecast (nwp-v2-1h-1km) and C-LAEF ensemble (ensemble-v2-1h-1km), INCA analysis/nowcast, WRF-Chem air quality. Data licensed under CC-BY 4.0. © GeoSphere Austria.

The API is keyless and intended for non-commercial use. When you redistribute its data, keep the attribution.

Rate limits

The GeoSphere Dataset API allows 5 requests/second and 240 requests/hour. Each call issues a small burst of concurrent requests (three for current weather, two each for the hourly forecast, the storm outlook and air quality); on an HTTP 429 the server retries once (when the API asks for a short wait) and otherwise returns a rate-limit notice.

Development

# Install dependencies (creates .venv from the locked versions)

uv sync

Lint & format

ruff check . ruff format .

Run unit tests

pytest -m "not integration"

Run integration tests (hits the live GeoSphere API)

pytest -m integration

License

MIT