原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Blink Camera

作者:AbhijatSaxena版本 0.1.1i★ 0i在你的电脑上运行代码仓库 ↗
注册名称io.github.AbhijatSaxena/blink-camera-mcp

安装方法

What it does

Control an Amazon Blink camera and its pan/tilt mount: aim it, read its position, grab a frame.

  • Connects 在你的电脑上运行
  • Account or key Needs BLINK_PASSWORD, BLINK_2FA_FILE · 1 setting to fill in (BLINK_USERNAME)
  • Category 网店与支付

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度0/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度7/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分7/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Blink Camera。按照 https://mcp.popnx.com/i/abhijatsaxena-blink-camera-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Blink Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "blink-camera": { "command": "uvx", "args": [ "blink-camera-mcp" ], "env": { "BLINK_USERNAME": "your-value", "BLINK_PASSWORD": "your-value", "BLINK_2FA_FILE": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Blink Camera 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 注册并创建 Blink Camera 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Blink Camera 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • BLINK_USERNAME Blink 账户的电子邮件地址。
      查看英文原文Blink account email address.

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  5. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "blink-camera": {
          "command": "uvx",
          "args": [
            "blink-camera-mcp"
          ],
          "env": {
            "BLINK_USERNAME": "your-value",
            "BLINK_PASSWORD": "your-value",
            "BLINK_2FA_FILE": "your-value"
          }
        }
      }
    }

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 退出 Claude 再重新打开

  7. 试一试

    用 Blink Camera 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Blink Camera,或回答中出现 Blink Camera 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • BLINK_CAMERA_NAME 当账户有多个摄像头时,指定要控制的摄像头。
    查看英文原文Which camera to drive, when the account has more than one.
  • BLINK_STATE_FILE 缓存登录令牌的位置。默认为 /.blink-mcp/state.json
    查看英文原文Where to cache the login token. Defaults to ~/.blink-mcp/state.json.
  • BLINK_FFMPEG ffmpeg 二进制文件的路径(如果它不在 PATH 中)。
    查看英文原文Path to the ffmpeg binary, if it is not on PATH.

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Blink Camera

Blink Camera 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Blink Camera 的应用

  • 需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)

B · 网店与支付 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Blink Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user blink-camera --env BLINK_USERNAME=your-value --env BLINK_PASSWORD=your-value --env BLINK_2FA_FILE=your-value -- uvx blink-camera-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Blink Camera 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 注册并创建 Blink Camera 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Blink Camera 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • BLINK_USERNAME Blink 账户的电子邮件地址。
      查看英文原文Blink account email address.

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  5. 粘贴这条命令并按 Enter

    claude mcp add --scope user blink-camera --env BLINK_USERNAME=your-value --env BLINK_PASSWORD=your-value --env BLINK_2FA_FILE=your-value -- uvx blink-camera-mcp

    按 Enter 前,把“your-value”改成你的密钥

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 Claude Code 中输入 /mcp

    应能看到 Blink Camera 在列表中并显示已连接

  7. 试一试

    用 Blink Camera 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Blink Camera,或回答中出现 Blink Camera 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • BLINK_CAMERA_NAME 当账户有多个摄像头时,指定要控制的摄像头。
    查看英文原文Which camera to drive, when the account has more than one.
  • BLINK_STATE_FILE 缓存登录令牌的位置。默认为 /.blink-mcp/state.json
    查看英文原文Where to cache the login token. Defaults to ~/.blink-mcp/state.json.
  • BLINK_FFMPEG ffmpeg 二进制文件的路径(如果它不在 PATH 中)。
    查看英文原文Path to the ffmpeg binary, if it is not on PATH.

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Blink Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "blink-camera": { "command": "uvx", "args": [ "blink-camera-mcp" ], "env": { "BLINK_USERNAME": "your-value", "BLINK_PASSWORD": "your-value", "BLINK_2FA_FILE": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Blink Camera 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 注册并创建 Blink Camera 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Blink Camera 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • BLINK_USERNAME Blink 账户的电子邮件地址。
      查看英文原文Blink account email address.

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  5. 填写你的密钥

    在 Blink Camera 的设置中,BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 Cursor 中以 Agent 模式打开 AI 聊天

  7. 试一试

    用 Blink Camera 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Blink Camera,或回答中出现 Blink Camera 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • BLINK_CAMERA_NAME 当账户有多个摄像头时,指定要控制的摄像头。
    查看英文原文Which camera to drive, when the account has more than one.
  • BLINK_STATE_FILE 缓存登录令牌的位置。默认为 /.blink-mcp/state.json
    查看英文原文Where to cache the login token. Defaults to ~/.blink-mcp/state.json.
  • BLINK_FFMPEG ffmpeg 二进制文件的路径(如果它不在 PATH 中)。
    查看英文原文Path to the ffmpeg binary, if it is not on PATH.

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要 Blink Camera 的密钥(在开发者网站创建) · 需要填写 1 项设置(BLINK_USERNAME) · 需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Blink Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "blink-camera": { "type": "stdio", "command": "uvx", "args": [ "blink-camera-mcp" ], "env": { "BLINK_USERNAME": "your-value", "BLINK_PASSWORD": "your-value", "BLINK_2FA_FILE": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Blink Camera 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 注册并创建 Blink Camera 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Blink Camera 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • BLINK_USERNAME Blink 账户的电子邮件地址。
      查看英文原文Blink account email address.

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  5. 填写你的密钥

    在 Blink Camera 的设置中,BLINK_PASSWORD, BLINK_2FA_FILE, BLINK_USERNAME 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 VS Code 中以 Agent 模式打开 AI 聊天

  7. 试一试

    用 Blink Camera 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Blink Camera,或回答中出现 Blink Camera 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • BLINK_CAMERA_NAME 当账户有多个摄像头时,指定要控制的摄像头。
    查看英文原文Which camera to drive, when the account has more than one.
  • BLINK_STATE_FILE 缓存登录令牌的位置。默认为 /.blink-mcp/state.json
    查看英文原文Where to cache the login token. Defaults to ~/.blink-mcp/state.json.
  • BLINK_FFMPEG ffmpeg 二进制文件的路径(如果它不在 PATH 中)。
    查看英文原文Path to the ffmpeg binary, if it is not on PATH.

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Blink Camera 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user blink-camera --env BLINK_USERNAME=your-value --env BLINK_PASSWORD=your-value --env BLINK_2FA_FILE=your-value -- uvx blink-camera-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "blink-camera": {
      "command": "uvx",
      "args": [
        "blink-camera-mcp"
      ],
      "env": {
        "BLINK_USERNAME": "your-value",
        "BLINK_PASSWORD": "your-value",
        "BLINK_2FA_FILE": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "blink-camera": {
      "command": "uvx",
      "args": [
        "blink-camera-mcp"
      ],
      "env": {
        "BLINK_USERNAME": "your-value",
        "BLINK_PASSWORD": "your-value",
        "BLINK_2FA_FILE": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "blink-camera": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "blink-camera-mcp"
      ],
      "env": {
        "BLINK_USERNAME": "your-value",
        "BLINK_PASSWORD": "your-value",
        "BLINK_2FA_FILE": "your-value"
      }
    }
  }
}

需要你填写的值

  • BLINK_USERNAME 必填 env
    Blink 账户的电子邮件地址。
    查看英文原文Blink account email address.
  • BLINK_PASSWORD 机密 必填 env
    Blink 账户密码。
    查看英文原文Blink account password.
  • BLINK_2FA_FILE 机密 必填 env
    保存双因素认证(2FA)验证码的文件路径,适用于已启用验证的账户。验证码只从该文件读取,不从命令行读取。
    查看英文原文Path to a file holding the 2FA code, when the account has verification enabled. The code is read from the file, never from the command line.
  • BLINK_CAMERA_NAME env
    当账户有多个摄像头时,指定要控制的摄像头。
    查看英文原文Which camera to drive, when the account has more than one.
  • BLINK_STATE_FILE env
    缓存登录令牌的位置。默认为 /.blink-mcp/state.json
    查看英文原文Where to cache the login token. Defaults to ~/.blink-mcp/state.json.
  • BLINK_FFMPEG env
    ffmpeg 二进制文件的路径(如果它不在 PATH 中)。
    查看英文原文Path to the ffmpeg binary, if it is not on PATH.

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
47/周
连接方式
在你的电脑上运行
最新版本i
0.1.1
发布到注册中心i
2026年9月26日
代码最后更新i
2026年9月26日
作者
AbhijatSaxena
软件包
pypi: blink-camera-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 AbhijatSaxena 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于2个月前

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 blink-camera-mcp@0.1.1 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/abhijatsaxena-blink-camera-mcp.svg)](https://mcp.popnx.com/en/servers/abhijatsaxena-blink-camera-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“网店与支付”中的其他服务器比较i

  • 星标数多于此分类中其他 2932 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 2932 个服务器的 33% 更新
  • 基础检查结果等于或优于此分类中其他 2932 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Blink Camera 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

你需要填写:BLINK_PASSWORD, BLINK_2FA_FILE

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于2个月前,最新版本(0.1.1)于2个月前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:Stripe MCP, flightclaw, Trade It, Marketplace Ad Pros: Amazon Ads & Seller Central, idealo MCP Server

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Stripe MCP

MCP server integrating with Stripe - tools for customers, products, payments, and more.

作者:stripe广泛使用★ 207213个月前更新

在云端运行✓ 服务方 · stripe.com

flightclaw

Search ~300 airlines and book flights with a checkout link. OAuth sign-in by email code.

作者:flightclaw正在增长★ 862个月前更新

在云端运行✓ 服务方 · flightclaw.com

Trade It

Connect brokerage accounts to AI assistants: holdings, orders, asset lookup, and approved trading.

作者:trade-it-inc起步阶段★ 6234天前更新

在云端运行✓ 服务方 · tradeit.app

idealo MCP Server

Search products, compare prices and discover deals across 6 European markets with your AI assistant.

作者:idealo起步阶段★ 286个月前更新

在云端运行✓ 服务方 · mcp.idealo.com
与相似项目对比
本项
Blink Camera
Stripe MCPflightclawTrade ItMarketplace Ad Pros: Amazon Ads & Seller Centralidealo MCP Server
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥是否否否否否
可在 Claude 中按 + 添加否是否否否否
基础检查3/34/44/45/54/44/4
许可证MITMITMITCC0-1.0MITMIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

blink-camera-mcp

An MCP server for Amazon Blink cameras, including the pan/tilt mount that Blink's own API gives you no way to move.

Install it with uvx blink-camera-mcp. It is listed in the official MCP Registry as io.github.AbhijatSaxena/blink-camera-mcp.

Give any MCP host — Claude Desktop, an IDE agent, your own client — the ability to see where a camera is pointing, aim it, and look through it.

camera_status       where it points, travel limits, session state, stream URL

pan_tilt aim at an absolute angle, wait until the hardware confirms pan_tilt_nudge turn relative to where it points now pan_tilt_stop stop the motors pan_tilt_home go to the saved home position pan_tilt_set_home save the current angle as home pan_tilt_overview 360° sweep snapshot one still frame, returned as image content

Why this exists

Blink cameras are cloud devices. There is no local API, no ONVIF, no UVC — video exists only as a short-lived session brokered by Blink's cloud, capped at 300 seconds. Two consequences:

  1. Anything that wants to use the camera has to hold that session open and refresh it.
  2. The pan/tilt mount is not a device you can talk to. It has no endpoint of its own: it is driven *inside* the camera's media session, and its position comes back on the same socket. A client that reads only the video and skips every other message never sees any of that traffic, which is why the mount has looked uncontrollable for years.

This server owns the session (or reuses one), frames it correctly, routes the accessory messages, and exposes the whole thing as MCP tools with closed-loop semantics.

Install

pip install blink-camera-mcp          # or without installing: uvx blink-camera-mcp

The distribution is blink-camera-mcp; the command it installs is blink-mcp.

You need Python 3.10+, a Blink account, and ffmpeg on PATH for snapshot (set BLINK_FFMPEG if it lives somewhere unusual).

Configure

Credentials come from the environment, and only the first run needs them:

export BLINK_USERNAME="you@example.com"

export BLINK_PASSWORD="..." export BLINK_CAMERA_NAME="Front Door" # optional; defaults to the only camera

The token is cached (token material only — a password is never written to disk), so later runs need no credentials. Cache location defaults to ~/.blink-mcp/state.json; override with BLINK_STATE_FILE.

If Blink asks for a 2FA code, the server will not prompt you and will not take the code from anywhere but a file:

export BLINK_2FA_FILE=/path/to/code.txt

Write the newest code into that file; it is read once and deleted. This keeps a live credential out of chat logs, shell history and argument lists.

Add it to your MCP host

blink-mcp --print-config
{

"mcpServers": { "blink": { "command": "uvx", "args": ["blink-camera-mcp", "--stream-port", "9000"] } } }

Hosts that manage their own Python (Claude Desktop, VS Code, LM Studio, …) run uvx as above. If you installed it into a virtualenv instead, set command to that interpreter and args to ["-m", "blink_mcp", …].

Claude Desktop — one-click

Download blink-camera-mcp-0.1.1.mcpb from the releases page and open it. Claude Desktop prompts for your Blink email and password (kept in the OS keychain), and asks for the 2FA code file only if your account uses verification. The bundle carries no server code of its own — it depends on this package from PyPI, so it can never drift from the released version.

LM Studio, VS Code, Cursor, Cline and friends

They all read the same JSON as above. Paste it into the host's MCP config — LM Studio: mcp.json; VS Code: .vscode/mcp.json; Cursor: .cursor/mcp.json. Cline installs it from this README.

Hermes

Hermes' curated catalog is for remote, OAuth-authenticated servers, and this one has to run on a machine that can reach your camera — so add it as an ordinary stdio server in ~/.hermes/config.yaml:

mcp_servers:

blink: command: "uvx" args: ["blink-camera-mcp"] env: BLINK_USERNAME: "you@example.com" BLINK_PASSWORD: "…"

Restart the session (or /reload-mcp) and the eight tools show up like any other.

Two ways to run it

Standalone (default) — the server owns the camera's live session and publishes the video to a local TCP port (tcp://127.0.0.1: , or a fixed one with --stream-port 9000). Point OBS at it as a Media Source if you want the camera as a webcam as well.

Against a bridge — if something else already holds the session:

blink-mcp --control-url http://127.0.0.1:9100 --stream-url tcp://127.0.0.1:9000

This matters because Blink allows one live session per camera: a viewer and a controller have to share it or take turns. Running two things that each insist on their own session means one of them loses.

What "closed-loop" means here

The mount reports its angle *while it is moving*. So pan_tilt does not sleep and hope: it sends the command and returns only when the hardware reports that its motors stopped at the requested angle — typically well under a second.

pan_tilt_nudge(+4)  -> settled=True moved=True elapsed=0.67s -> pan=117 tilt=-75

pan_tilt_nudge(-4) -> settled=True moved=True -> pan=113 tilt=-75

Two deliberate behaviours, because a confident wrong answer is worse than a failure:

  • if the mount never confirms, the tool fails rather than returning the last angle it happened to know (a stale position dressed up as success would have an agent announce a move that never happened);
  • a command to the angle the camera already holds is a no-op reported as moved: false — success, not failure.

Privacy and safety

  • snapshot decodes a frame of whatever the camera is pointed at. The tool description says so, and tells the agent to use it only when the user asks. Nothing here captures anything on its own.
  • The server talks to Blink directly, and the token cache holds no password.
  • Any bridge control plane is loopback-only by design: it moves a physical camera.

How it was built

The accessory channel is undocumented. It was recovered from the official Android app — dex bytecode and the native library's symbol table — and then verified against hardware:

frame        [flag:1][id:4 big-endian][length:4 big-endian][payload]

send flag 0x14 INLINE_COMMAND, id = commandId move=3 [0,0,0,0, , ,0] stop=4 home=5 set_home=6 overview=7 receive flag 0x15 ACCESSORY_MESSAGE, id = message id POSITION=2 / HOME_POSITION=3 [ , , , ] ROSIE_LIMITS=4 PAN_OVERVIEW_COMPLETE=5 lights/siren = 0/1/6/7

status is 0x00 idle and 0x10 moving. Angles are single signed bytes.

The same protocol knowledge is being contributed upstream to blinkpy so every Blink integration benefits, not just this server. blink_mcp/immi.py is byte-identical to the module submitted there, and switches to the upstream copy automatically once it ships.

Standing on the shoulders of blinkpy, which implements the Blink cloud API and the IMMI transport.

Limitations

  • Verified on a Blink Mini with the pan/tilt mount. Other camera families use a different live transport (WebRTC with JSON-RPC commands rather than this binary channel) and are not supported yet.
  • One live session per camera, as above.
  • Blink caps a session at 300 s; the server rotates it around 270 s and consumers never notice.
  • snapshot needs ffmpeg; it decodes one frame from the stream rather than opening a second session.

Tests

pytest                    # 68 offline tests: protocol bytes, closed-loop logic, tool layer,

a real stdio handshake, and a stub control plane

The suite is offline and needs no camera. For real hardware:

python tests/live_smoke.py --state-file ~/.blink-mcp/state.json

which logs in, moves the camera out and back, and captures a frame.

License

MIT