World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Control a USB (UVC) pan/tilt/zoom camera, with every move confirmed from the picture.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 UVC PTZ Camera。按照 https://mcp.popnx.com/i/abhijatsaxena-uvc-ptz-camera-mcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server UVC PTZ Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 UVC PTZ Camera 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"uvc-ptz-camera": {
"command": "uvx",
"args": [
"uvc-ptz-camera-mcp"
]
}
}
}用 UVC PTZ Camera 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 UVC PTZ Camera,或回答中出现 UVC PTZ Camera 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
UVC_PTZ_STATE_DIR 存储每台摄像头已学习信息的位置。默认为 /.uvc-ptz-camera-mcp。仅保存角度数据,从不保存凭据。 UVC_PTZ_SIM_SOURCE 用于替代合成全景图、作为模拟器全景图的图像路径。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 UVC PTZ Camera
UVC PTZ Camera 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 UVC PTZ Camera 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server UVC PTZ Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 UVC PTZ Camera 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp应能看到 UVC PTZ Camera 在列表中并显示已连接
用 UVC PTZ Camera 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 UVC PTZ Camera,或回答中出现 UVC PTZ Camera 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
UVC_PTZ_STATE_DIR 存储每台摄像头已学习信息的位置。默认为 /.uvc-ptz-camera-mcp。仅保存角度数据,从不保存凭据。 UVC_PTZ_SIM_SOURCE 用于替代合成全景图、作为模拟器全景图的图像路径。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server UVC PTZ Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 UVC PTZ Camera 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 UVC PTZ Camera 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 UVC PTZ Camera,或回答中出现 UVC PTZ Camera 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
UVC_PTZ_STATE_DIR 存储每台摄像头已学习信息的位置。默认为 /.uvc-ptz-camera-mcp。仅保存角度数据,从不保存凭据。 UVC_PTZ_SIM_SOURCE 用于替代合成全景图、作为模拟器全景图的图像路径。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server UVC PTZ Camera,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "uvc-ptz-camera": { "type": "stdio", "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 UVC PTZ Camera 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 UVC PTZ Camera 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 UVC PTZ Camera,或回答中出现 UVC PTZ Camera 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
UVC_PTZ_STATE_DIR 存储每台摄像头已学习信息的位置。默认为 /.uvc-ptz-camera-mcp。仅保存角度数据,从不保存凭据。 UVC_PTZ_SIM_SOURCE 用于替代合成全景图、作为模拟器全景图的图像路径。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"uvc-ptz-camera": {
"command": "uvx",
"args": [
"uvc-ptz-camera-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"uvc-ptz-camera": {
"command": "uvx",
"args": [
"uvc-ptz-camera-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"uvc-ptz-camera": {
"type": "stdio",
"command": "uvx",
"args": [
"uvc-ptz-camera-mcp"
]
}
}
}UVC_PTZ_STATE_DIR envUVC_PTZ_SIM_SOURCE env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 AbhijatSaxena 验证,该账户拥有此仓库
代码最后更新于42天前
使用 MIT
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 uvc-ptz-camera-mcp@0.2.0 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/abhijatsaxena-uvc-ptz-camera-mcp)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于42天前,最新版本(0.2.0)于42天前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 UVC PTZ Camera | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
An MCP server for USB (UVC) pan/tilt/zoom cameras: aim them, nudge them, sweep them smoothly, zoom, and look through them — with every move confirmed by comparing the picture before and after.
No account, no cloud, no vendor SDK. One device, one USB cable.
camera_status the camera, its axes and ranges, and whether it is real
aim point an axis at an absolute value, confirmed from the picture nudge move relative to where the device says it is sweep a smooth timed move, streamed at 15 Hz zoom set zoom as a multiplier (1x .. the camera's maximum) recentre every axis back to its default look one frame, returned as an image aim_learn remember "this direction is the desk" aim_list what has been recorded for this camera go_to point at a recorded direction plan_shot compile a multi-step shot and report what it would do, moving nothing run_shot execute a multi-step move, verified after every waypoint mark_view store the current picture under a label check_view has the picture changed since that label? track_start follow a subject: detect, measure, take a step, look again track_status what the follow loop is doing, iteration by iteration track_stop stop following and report what it saw and what it moved
Composing a shot is plan_shot then run_shot. Planning compiles exactly the steps the executor will compile, reports the per-step schedule, how far each axis travels and how long it takes, and touches nothing — so an agent can iterate on "a panorama, then zoom in on me" against the camera's real ranges *before* anything moves, instead of finding out afterwards.
track_start runs a loop that keeps the camera pointed at a subject: detect it, measure how far it is from the centre of the frame, take a bounded step, look again. It decides only from the picture, for the same reason every other move here does — this camera's own report of where it is pointing cannot be trusted. It stops on its own when the subject is lost, when it settles inside the dead zone, when the camera stops answering, or after max_seconds, and track_status lists every iteration with the offset it measured and the step it applied.
Two quantities are *mount*-dependent rather than device-dependent, so they are explicit parameters instead of clever guesses: gain, degrees of movement per pixel of offset, and invert, which flips the direction. A wrong choice shows up honestly as a residual error that grows, and a single iteration is capped at 25 degrees, so a wrong gain converges slowly rather than throwing the camera across its whole range in one command.
Detection uses OpenCV's bundled face cascade (pip install 'uvc-ptz-camera-mcp[tracking]'), which needs no model download, no account and no network at first use. It finds faces: this follows a person, not a car or a dog. The loop and its arithmetic are tested against the simulator, but no part of follow mode has ever run against real hardware — treat it as the least proven thing here.
This class of camera reports positions it never moved to. Measured on the reference device (a DJI Osmo Pocket 4P in webcam mode, over its standard UVC controls):
180 read back `180` while the video proved the camera had not moved at all;0 on every sample while the frame demonstrably changed;120 read back 119, pan 200 read back 199.An agent acting on those values reports moves that never happened. So this server treats every device-reported value as a hint — returned, labelled, never trusted — and decides moved by comparing frames.
The threshold is not a guess either. It was calibrated on labelled hardware frames: every "same view" pair scored ≤ 0.104 (a 96-second quiet baseline, and two commands the hardware ignored), every "view changed" pair scored ≥ 0.624 (a pan, a tilt, a 12× zoom, two aim steps). The shipped threshold is the midpoint, 0.364 — a 6× separation — and the test suite asserts it still separates them. The labelled pairs and the values the metric produced are kept in the repository (tests/fixtures/) so the number can be re-checked rather than believed — as measurements, not pictures: no frame or video taken by a camera is committed here, and a test fails if one appears. The measurements behind the calibration are in docs/measurements.md.
device_reported is returned beside it, labelled a hint.moved: false, no error.uvx uvc-ptz-camera-mcp # run without installing
pip install uvc-ptz-camera-mcp # or install it
For a real camera on Windows you also need the DirectShow extras:
pip install "uvc-ptz-camera-mcp[dshow]"
Then point your host at it — --print-config emits the snippet with the right interpreter:
uvc-ptz-mcp --print-config
uvc-ptz-mcp --list-devices # what to pass to --device uvc-ptz-mcp --backend simulator # try it with no camera attached
Claude Desktop, Cursor, VS Code and friends all take the same shape — this is the whole configuration, because there is nothing to authenticate:
{
"mcpServers": { "ptz-camera": { "command": "uvx", "args": ["uvc-ptz-camera-mcp"] } } }
Add "--device", "Osmo" (any substring of the name --list-devices prints) when the machine has more than one camera, and "--backend", "simulator" to work with none. Both can also be set in the environment instead of the args — UVC_PTZ_DEVICE, UVC_PTZ_BACKEND and UVC_PTZ_STATE_DIR — which is what the Claude Desktop bundle uses, and which survives a host restart without editing its config again. A flag wins over the environment, and an empty value means "not set" (a host that leaves an option blank writes "", not nothing). Claude Desktop also accepts the .mcpb bundle attached to each release as a one-click install.
| Backend | What it is |
|---|---|
auto (default) | Prefer a real camera; fall back to the simulator, saying why |
dshow | Windows DirectShow: the real device path |
simulator | No hardware at all: a model calibrated from the measurements below |
Every result carries "simulated": true or false, and camera_status reports the reason when the simulator is standing in. Nothing quietly pretends to be hardware: a caller must never believe it is driving a camera when it is driving a model.
The simulator is calibrated from the reference device, not invented: ~0.4 s from write to first motion, a pan completing in about a second, a 4× zoom in about 2.5 s, silently dropped writes, and a read-back that echoes a request the hardware never applied. It renders frames by cropping a wide panorama, so a simulated pan genuinely changes the pixels — a simulator with a static picture would let verification pass vacuously.
v4l2; the interface is in place, the implementation is not written.IKsControl is refused on the device filter, IKsTopologyInfo lists three nodes and no vendor node, and CreateNodeInstance fails on all of them. Linux can reach it through uvcvideo's UVCIOC_CTRL_QUERY; that is a separate backend.check_view is there for judging a view rather than a move.pip install -e ".[dshow]" numpy pytest pytest-asyncio ruff
python -m pytest -q # 39 tests, three layers python -m ruff check . && python -m ruff format --check .
The suite is layered deliberately: the tool surface in-process against the simulator (mapping, validation, honest failure), pure unit tests for the compiler and the metric, and a real stdio handshake as a subprocess — including one run with a device name that cannot exist, because a server that dies at startup is invisible to every host and directory that lists it.
Built against a DJI Osmo Pocket 4P in webcam mode: VID_2CA3 / PID_0023, exposing pan −38…215°, tilt −33…105°, roll ±35°, zoom 100…1200 (1×–12×) as standard UVC camera controls. Any UVC PTZ camera exposes the same surface; the ranges are read from the device at startup rather than assumed, and nothing vendor-specific is hard-coded.
Not affiliated with, endorsed by, or supported by DJI.