原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Iaqualink MCP

作者:chrischall版本 0.3.1i★ 0i在你的电脑上运行代码仓库 ↗
注册名称io.github.chrischall/iaqualink-mcp

安装方法

What it does

iAqualink pool equipment: status plus confirm-gated pump, heater, light and set-point control.

  • Connects 在你的电脑上运行
  • Account or key Needs IAQUALINK_PASSWORD
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度16/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分28/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 21 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Iaqualink MCP。按照 https://mcp.popnx.com/i/chrischall-iaqualink-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Iaqualink MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "iaqualink": { "command": "npx", "args": [ "-y", "@chrischall/iaqualink-mcp" ], "env": { "IAQUALINK_PASSWORD": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) IAQUALINK_PASSWORD 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Iaqualink MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 注册并创建 Iaqualink MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    获取密钥的方法见下方开发者的 README

  3. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  4. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "iaqualink": {
          "command": "npx",
          "args": [
            "-y",
            "@chrischall/iaqualink-mcp"
          ],
          "env": {
            "IAQUALINK_PASSWORD": "your-value"
          }
        }
      }
    }

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  5. 退出 Claude 再重新打开

  6. 试一试

    用 Iaqualink MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Iaqualink MCP,或回答中出现 Iaqualink MCP 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • IAQUALINK_EMAIL 您用于登录 iAqualink 应用的电子邮件地址(所有工具都需要;没有它服务器也能启动)。
    查看英文原文The email address you sign in to the iAqualink app with (needed by every tool; the server starts without it)
  • IAQUALINK_STATUS_CACHE_SECONDS 在重新查询 iAqualink 之前复用系统状态读数的秒数(默认 5;0 表示禁用)
    查看英文原文Seconds a system's status read is reused before re-polling iAqualink (default 5; 0 disables)
  • IAQUALINK_WEBTOUCH_STREAM_HOSTS 除 webtouch.iaqualink.net 和 prm.iaqualink.net 外,WebTouch 显示流还可以从哪些额外主机(逗号分隔)提供。除非 WebTouch 错误中指明了新主机,否则请保持不设置。
    查看英文原文Extra hosts (comma-separated) the WebTouch display stream may be served from, beyond webtouch.iaqualink.net and prm.iaqualink.net. Leave unset unless a WebTouch error names a new host
  • IAQUALINK_VERIFY_TIMEOUT_MS 写入操作在报告“已发送但未确认”之前持续重新读取以确认更改已生效的时长(毫秒),适用于 iAqua 和 eXO 系统(正整数;iAqua 默认 15000,eXO 默认 30000)。
    查看英文原文Milliseconds a write keeps re-reading to confirm the change landed before it reports sent-unconfirmed, for both iAqua and eXO systems (a positive integer; default 15000 for iAqua, 30000 for eXO)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Iaqualink MCP

Iaqualink MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Iaqualink MCP 的应用

  • 需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)
  • 需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)
  • 需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Iaqualink MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user iaqualink --env IAQUALINK_PASSWORD=your-value -- npx -y @chrischall/iaqualink-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) IAQUALINK_PASSWORD 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Iaqualink MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 注册并创建 Iaqualink MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    获取密钥的方法见下方开发者的 README

  3. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  4. 粘贴这条命令并按 Enter

    claude mcp add --scope user iaqualink --env IAQUALINK_PASSWORD=your-value -- npx -y @chrischall/iaqualink-mcp

    按 Enter 前,把“your-value”改成你的密钥

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  5. 在 Claude Code 中输入 /mcp

    应能看到 Iaqualink MCP 在列表中并显示已连接

  6. 试一试

    用 Iaqualink MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Iaqualink MCP,或回答中出现 Iaqualink MCP 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • IAQUALINK_EMAIL 您用于登录 iAqualink 应用的电子邮件地址(所有工具都需要;没有它服务器也能启动)。
    查看英文原文The email address you sign in to the iAqualink app with (needed by every tool; the server starts without it)
  • IAQUALINK_STATUS_CACHE_SECONDS 在重新查询 iAqualink 之前复用系统状态读数的秒数(默认 5;0 表示禁用)
    查看英文原文Seconds a system's status read is reused before re-polling iAqualink (default 5; 0 disables)
  • IAQUALINK_WEBTOUCH_STREAM_HOSTS 除 webtouch.iaqualink.net 和 prm.iaqualink.net 外,WebTouch 显示流还可以从哪些额外主机(逗号分隔)提供。除非 WebTouch 错误中指明了新主机,否则请保持不设置。
    查看英文原文Extra hosts (comma-separated) the WebTouch display stream may be served from, beyond webtouch.iaqualink.net and prm.iaqualink.net. Leave unset unless a WebTouch error names a new host
  • IAQUALINK_VERIFY_TIMEOUT_MS 写入操作在报告“已发送但未确认”之前持续重新读取以确认更改已生效的时长(毫秒),适用于 iAqua 和 eXO 系统(正整数;iAqua 默认 15000,eXO 默认 30000)。
    查看英文原文Milliseconds a write keeps re-reading to confirm the change landed before it reports sent-unconfirmed, for both iAqua and eXO systems (a positive integer; default 15000 for iAqua, 30000 for eXO)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Iaqualink MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "iaqualink": { "command": "npx", "args": [ "-y", "@chrischall/iaqualink-mcp" ], "env": { "IAQUALINK_PASSWORD": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) IAQUALINK_PASSWORD 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Iaqualink MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 注册并创建 Iaqualink MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    获取密钥的方法见下方开发者的 README

  3. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  4. 填写你的密钥

    在 Iaqualink MCP 的设置中,IAQUALINK_PASSWORD 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  5. 在 Cursor 中以 Agent 模式打开 AI 聊天

  6. 试一试

    用 Iaqualink MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Iaqualink MCP,或回答中出现 Iaqualink MCP 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • IAQUALINK_EMAIL 您用于登录 iAqualink 应用的电子邮件地址(所有工具都需要;没有它服务器也能启动)。
    查看英文原文The email address you sign in to the iAqualink app with (needed by every tool; the server starts without it)
  • IAQUALINK_STATUS_CACHE_SECONDS 在重新查询 iAqualink 之前复用系统状态读数的秒数(默认 5;0 表示禁用)
    查看英文原文Seconds a system's status read is reused before re-polling iAqualink (default 5; 0 disables)
  • IAQUALINK_WEBTOUCH_STREAM_HOSTS 除 webtouch.iaqualink.net 和 prm.iaqualink.net 外,WebTouch 显示流还可以从哪些额外主机(逗号分隔)提供。除非 WebTouch 错误中指明了新主机,否则请保持不设置。
    查看英文原文Extra hosts (comma-separated) the WebTouch display stream may be served from, beyond webtouch.iaqualink.net and prm.iaqualink.net. Leave unset unless a WebTouch error names a new host
  • IAQUALINK_VERIFY_TIMEOUT_MS 写入操作在报告“已发送但未确认”之前持续重新读取以确认更改已生效的时长(毫秒),适用于 iAqua 和 eXO 系统(正整数;iAqua 默认 15000,eXO 默认 30000)。
    查看英文原文Milliseconds a write keeps re-reading to confirm the change landed before it reports sent-unconfirmed, for both iAqua and eXO systems (a positive integer; default 15000 for iAqua, 30000 for eXO)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要 Iaqualink MCP 的密钥(在开发者网站创建) · 需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Iaqualink MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "iaqualink": { "type": "stdio", "command": "npx", "args": [ "-y", "@chrischall/iaqualink-mcp" ], "env": { "IAQUALINK_PASSWORD": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) IAQUALINK_PASSWORD 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Iaqualink MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 注册并创建 Iaqualink MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    获取密钥的方法见下方开发者的 README

  3. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  4. 填写你的密钥

    在 Iaqualink MCP 的设置中,IAQUALINK_PASSWORD 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  5. 在 VS Code 中以 Agent 模式打开 AI 聊天

  6. 试一试

    用 Iaqualink MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Iaqualink MCP,或回答中出现 Iaqualink MCP 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • IAQUALINK_EMAIL 您用于登录 iAqualink 应用的电子邮件地址(所有工具都需要;没有它服务器也能启动)。
    查看英文原文The email address you sign in to the iAqualink app with (needed by every tool; the server starts without it)
  • IAQUALINK_STATUS_CACHE_SECONDS 在重新查询 iAqualink 之前复用系统状态读数的秒数(默认 5;0 表示禁用)
    查看英文原文Seconds a system's status read is reused before re-polling iAqualink (default 5; 0 disables)
  • IAQUALINK_WEBTOUCH_STREAM_HOSTS 除 webtouch.iaqualink.net 和 prm.iaqualink.net 外,WebTouch 显示流还可以从哪些额外主机(逗号分隔)提供。除非 WebTouch 错误中指明了新主机,否则请保持不设置。
    查看英文原文Extra hosts (comma-separated) the WebTouch display stream may be served from, beyond webtouch.iaqualink.net and prm.iaqualink.net. Leave unset unless a WebTouch error names a new host
  • IAQUALINK_VERIFY_TIMEOUT_MS 写入操作在报告“已发送但未确认”之前持续重新读取以确认更改已生效的时长(毫秒),适用于 iAqua 和 eXO 系统(正整数;iAqua 默认 15000,eXO 默认 30000)。
    查看英文原文Milliseconds a write keeps re-reading to confirm the change landed before it reports sent-unconfirmed, for both iAqua and eXO systems (a positive integer; default 15000 for iAqua, 30000 for eXO)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Iaqualink MCP 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user iaqualink --env IAQUALINK_PASSWORD=your-value -- npx -y @chrischall/iaqualink-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "iaqualink": {
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/iaqualink-mcp"
      ],
      "env": {
        "IAQUALINK_PASSWORD": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "iaqualink": {
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/iaqualink-mcp"
      ],
      "env": {
        "IAQUALINK_PASSWORD": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "iaqualink": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/iaqualink-mcp"
      ],
      "env": {
        "IAQUALINK_PASSWORD": "your-value"
      }
    }
  }
}

需要你填写的值

  • IAQUALINK_EMAIL env
    您用于登录 iAqualink 应用的电子邮件地址(所有工具都需要;没有它服务器也能启动)。
    查看英文原文The email address you sign in to the iAqualink app with (needed by every tool; the server starts without it)
  • IAQUALINK_PASSWORD 机密 必填 env
    您的 iAqualink 密码(所有工具都需要;服务器无此密码也可启动)。
    查看英文原文Your iAqualink password (needed by every tool; the server starts without it)
  • IAQUALINK_STATUS_CACHE_SECONDS env
    在重新查询 iAqualink 之前复用系统状态读数的秒数(默认 5;0 表示禁用)
    查看英文原文Seconds a system's status read is reused before re-polling iAqualink (default 5; 0 disables)
  • IAQUALINK_WEBTOUCH_STREAM_HOSTS env
    除 webtouch.iaqualink.net 和 prm.iaqualink.net 外,WebTouch 显示流还可以从哪些额外主机(逗号分隔)提供。除非 WebTouch 错误中指明了新主机,否则请保持不设置。
    查看英文原文Extra hosts (comma-separated) the WebTouch display stream may be served from, beyond webtouch.iaqualink.net and prm.iaqualink.net. Leave unset unless a WebTouch error names a new host
  • IAQUALINK_VERIFY_TIMEOUT_MS env
    写入操作在报告“已发送但未确认”之前持续重新读取以确认更改已生效的时长(毫秒),适用于 iAqua 和 eXO 系统(正整数;iAqua 默认 15000,eXO 默认 30000)。
    查看英文原文Milliseconds a write keeps re-reading to confirm the change landed before it reports sent-unconfirmed, for both iAqua and eXO systems (a positive integer; default 15000 for iAqua, 30000 for eXO)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
506/周
连接方式
在你的电脑上运行
最新版本i
0.3.1
分类i
其他
发布到注册中心i
2026年11月4日
代码最后更新i
2026年11月15日
作者
chrischall
软件包
npm: @chrischall/iaqualink-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 chrischall 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于4天前

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 @chrischall/iaqualink-mcp@0.3.1 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/chrischall-iaqualink-mcp.svg)](https://mcp.popnx.com/en/servers/chrischall-iaqualink-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20653 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 20653 个服务器的 76% 更新
  • 基础检查结果等于或优于此分类中其他 20653 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Iaqualink MCP 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

你需要填写:IAQUALINK_PASSWORD

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于4天前,最新版本(0.3.1)于15天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Node.js。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Iaqualink MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥是否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

iaqualink-mcp

MCP server for iAqualink (Zodiac / Jandy / Fluidra) pool and spa equipment. Read temperatures, set points, pumps, heaters, lights, aux circuits and salt chlorinator state, and switch equipment — every change confirmation-gated and verified by a re-read. It signs in with your own iAqualink account (the same email and password as the iAqualink app); no browser, extension or bridge.

Supports the two system types the reference client supports: iAqua (Jandy iAquaLink panels) and eXO (Zodiac salt chlorinators). Other device types on the account (robotic cleaners, …) are listed but not controlled.

Status: partly verified live. Request shapes come from

iaqualink-py 0.7.0 (what Home

Assistant uses) and a WebTouch capture (see

docs/IAQUALINK-API.md).

- Seen working on a real iAqua (RS) panel, 2026-10-11/12: sign-in, the

system list (devices.json), the iAqua status reads (get_home,

get_devices) and WebTouch (location lookup, init, button presses and the

display stream).

- Still derived, not yet exercised live: the iAqua set_* commands (pump,

heater, aux, light, temperature), every eXO request (shadow read and

writes), iaqualink_set_chlorinator's inferred shape, and the iQ20 schedule

fallback. Every write still re-reads to confirm what happened.

This project was developed and is maintained by AI (Claude Code). Use at your own discretion.

Tools

ToolWhat it doesAnnotation
iaqualink_list_systemsSystems on the account and their serialsread
iaqualink_get_statusTemperatures, set points, pumps, heaters, aux/lights, chlorinator, salinity/pH/ORP (view: compact · full · raw)read
iaqualink_healthcheckWhether a sign-in is configured and acceptedread
iaqualink_set_equipmentPool/spa pump, pool/spa/solar heater; eXO filter pump, production, boost, low, heating — on/offwrite, not destructive
iaqualink_set_auxAux circuit or light on/off (by number, aux_ or label)write, not destructive
iaqualink_set_lightDimmable brightness (0/25/50/75/100) or color effect (iAqua)write, not destructive
iaqualink_set_temperaturePool and/or spa set point (iAqua °F/°C; eXO °C pool)write, not destructive
iaqualink_set_chlorinatoreXO chlorinator output % — inferred shape, not in iaqualink-pywrite, not destructive
iaqualink_list_schedulesRS panel programs via WebTouch (iAqua; iQ20 fallback probe); eXO timersread
iaqualink_add_scheduleAdd an RS panel program (circuit, start, stop, run days) via WebTouchwrite, not destructive
iaqualink_edit_scheduleChange an RS panel program's start / stop / run days via WebTouchwrite, not destructive
iaqualink_delete_scheduleDelete an RS panel program via WebTouch — no undowrite, destructive
iaqualink_set_scheduleSet / re-time / disable an eXO timer (start–stop, rpm on variable-speed pumps) — eXO only, unverified livewrite, not destructive
iaqualink_check_panelIs an RS system online, and what is its panel showing (screen, open dialog, Edit mode with unsaved changes)? Run it when the app and these tools disagreeread
iaqualink_list_pump_speedsRS panel variable-speed pump: the named speeds, their RPM and which one runs, via WebTouchread
iaqualink_set_pump_speedRun the pump at a named speed via WebTouchwrite, not destructive
iaqualink_set_pump_speed_rpmChange a named speed's RPM (600–3450) via WebTouch; a speed that is not running runs briefly while set, then the running speed is restoredwrite, not destructive
iaqualink_list_onetouchRS panel OneTouch scenes (Spa Mode, All OFF, …) and their state, via WebTouchread
iaqualink_set_onetouchTurn a OneTouch scene on/off via WebTouch — toggle not exercised live yetwrite, not destructive

Systems by name. At start the server lists the account's systems once; when that works, every serial argument advertises the supported systems' names (e.g. "Pool", "Spa") as an enum, and every tool accepts a name or a serial — an unknown name is refused with the list of known systems. If the listing fails (no sign-in yet, iAqualink down, past 5 s), the argument is a plain serial and nothing else changes. Every tool also carries _meta.mint hints (domain home; lookup for reads, turn-on-off for the set_* switches, change for schedule edits) that mcp-host's context groups read and other clients ignore.

Every write has an inverse in this set and reaches no other person — except deleting a panel program, which the panel stores immediately with no undo, so that one is marked destructive.

Schedules and OneTouch on a Jandy AquaLink RS panel go through WebTouch, the panel emulation the iAqualink web app uses: the server opens the panel's display stream, presses the same buttons a person would (checking before every press that the panel is on the expected screen and row, and aborting otherwise), returns to Home, and re-reads to verify. Only one WebTouch session per system runs at a time. The add / edit / delete sequences follow a live capture on an RS panel (2026-10-11) — see docs/IAQUALINK-API.md. If WebTouch is unavailable, iaqualink_list_schedules falls back to iQ20 schedules (adapter firmware 3+), probing r-api.iaqualink.net/v2 (Bearer), p-api.iaqualink.net/v2 (Bearer), p-api.iaqualink.net/v2 (bare token) and prm.iaqualink.net/v1 (bare token) once each and reporting every attempt. iQ20 schedule *writes* are not built.

How a write works. It reads the current state first and sends nothing if it already matches — iAqua's pump/heater/aux commands are *toggles*, so a blind send would flip whatever the state happened to be. It then asks you to confirm (an elicitation prompt where the client supports one; otherwise a preview plus a confirmToken, bound to the state it was planned against), sends, and re-reads until the requested value shows up. The result is confirmed, unchanged, or sent-unconfirmed with what was observed (eXO applies changes asynchronously — check again rather than retrying).

Setup

npm i -g @chrischall/iaqualink-mcp
VariableRequiredMeaning
IAQUALINK_EMAILfor every toolYour iAqualink app sign-in email
IAQUALINK_PASSWORDfor every toolYour iAqualink password (not trimmed)
IAQUALINK_STATUS_CACHE_SECONDSnoSeconds a status read is reused (default 5; 0 disables)
IAQUALINK_WEBTOUCH_STREAM_HOSTSnoExtra hosts (comma-separated) the WebTouch display stream may come from; default only prm.iaqualink.net
IAQUALINK_VERIFY_TIMEOUT_MSnoMilliseconds a write re-reads to confirm the change before reporting sent-unconfirmed, for iAqua and eXO alike (positive integer; default 15000 iAqua, 30000 eXO)
MCP_CONFIRM_MODEnoask-user (default) / auto / refuse
MCP_CONFIRM_TTL_SECONDSnoconfirmToken lifetime (default 600)
MCP_CONFIRM_ELICITATIONnooff skips the prompt even on clients that declare elicitation

The server starts without credentials (so hosts can list its tools) and reports them missing on the first call. A rejected password is never retried: the refusal is remembered until the server restarts, so a typo cannot lock the account.

Claude Code: claude mcp add iaqualink -e IAQUALINK_EMAIL=… -e IAQUALINK_PASSWORD=… -- npx -y @chrischall/iaqualink-mcp

Hosted (claude.ai)

mint.yaml declares per-user children with an email/password form on the connector's authorize page (each person signs in as themselves), egress to exactly prod.zodiac-io.com, r-api.iaqualink.net, p-api.iaqualink.net (iQ20 probe only) and prm.iaqualink.net (WebTouch, and the iQ20 probe); the WebTouch display stream is refused on any other host unless it is added to IAQUALINK_WEBTOUCH_STREAM_HOSTS (and egress). No persistent state — the session lives in memory and one sign-in rebuilds it after a cold start.

Skills

  • skills/iaqualink — how to use these tools.
  • skills/iaqualink-curl — the same reads straight from a shell with curl, credentials from the macOS Keychain (the sign-in, system list and iAqua reads are seen live; the eXO shadow read is still derived from iaqualink-py).

Development

npm install

npm run build npm run test:coverage # typecheck (src + tests) + vitest, 100% coverage — what CI runs

Tests run the real client against an in-memory iAqualink (tests/support/fake-server.ts) built from iaqualink-py's fixtures.