原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Ofw MCP

作者:chrischall版本 2.29.1i★ 15i在你的电脑上运行代码仓库 ↗
注册名称io.github.chrischall/ofw-mcp

安装方法

What it does

OurFamilyWizard co-parenting for Claude — messages, calendar, expenses, and journal

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 会计、财务与税务

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度32/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分44/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 30 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Ofw MCP。按照 https://mcp.popnx.com/i/chrischall-ofw-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Ofw MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "ofw": { "command": "npx", "args": [ "-y", "ofw-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Ofw MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "ofw": {
          "command": "npx",
          "args": [
            "-y",
            "ofw-mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 Ofw MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Ofw MCP,或回答中出现 Ofw MCP 的工具名称,就表示连接成功

28 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • OFW_USERNAME 你的 OurFamilyWizard 登录邮箱地址。可选;若省略,服务器将改用 fetchproxy 浏览器扩展(需已登录 ourfamilywizard.com)。
    查看英文原文Your OurFamilyWizard login email address. Optional — if omitted, the server falls back to the fetchproxy browser extension (requires being signed in to ourfamilywizard.com).
  • OFW_PASSWORD 你的 OurFamilyWizard 密码。可选,参见 OFW_USERNAME。
    查看英文原文Your OurFamilyWizard password. Optional — see OFW_USERNAME.
  • OFW_WRITE_MODE Write-tool gate: "none" registers no write tools; "drafts" registers draft-level writes only (save/delete drafts, upload attachments); "all" registers everything (default). Unrecognized values fail c…
  • OFW_CALENDAR_WRITES 设置为"true"可在"drafts"写入模式下注册日历写入工具(创建/更新/删除事件)。事件没有草稿阶段,但可以撤销。永远不会覆盖"none"。
    查看英文原文Set to "true" to register calendar write tools (create/update/delete event) in "drafts" write mode. Events have no draft stage but are reversible. Never overrides "none".
  • OFW_ALLOW_MARK_READ Default "true". Set "false" to forbid any tool from marking a message read on OurFamilyWizard - reading a body for the first time stamps a co-parent-visible "First Viewed" time that cannot be undone.…
  • OFW_CONFIRM_MARK_READ Default "false". Set "true" to show an unread message's subject, sender and sent time and ask for confirmation before opening it marks it read. Sync fetchUnreadBodies asks too; allowMarkRead probes a…
  • OFW_FETCH_UNREAD_BODIES Default "false". Whether ofw_sync_messages fetches unread inbox bodies by default (each fetch stamps a First Viewed time). Capped by OFW_ALLOW_MARK_READ.
  • OFW_READ_DAYS 允许读取消息内容的日期列表,例如 "mon,thu"(工作日、YYYY-MM-DD 或 YYYY-MM-DD..YYYY-MM-DD,以 DISPLAY_TZ 为准)。其他日期:未读收件箱消息仅显示主题,且从不会被标记为已读
    查看英文原文Allow list of days message content may be read, e.g. "mon,thu" (weekdays, YYYY-MM-DD, or YYYY-MM-DD..YYYY-MM-DD, in DISPLAY_TZ). Other days: unread inbox messages show subject only and are never mark…
  • OFW_NO_READ_DAYS 不得打开未读收件箱邮件的日期拒绝列表(格式与 OFW_READ_DAYS 相同;优先于它)。未设置 = 无。
    查看英文原文Deny list of days unread inbox messages may NOT be opened (same format as OFW_READ_DAYS; wins over it). Unset = none.
  • OFW_SESSION_CACHE 设置为 false 可禁用磁盘上的会话缓存,并在每次进程启动时重新进行身份验证。默认启用。
    查看英文原文Set to false to disable the on-disk session cache and re-authenticate on every process start. Defaults to enabled.
  • OFW_SESSION_FILE 会话缓存文件的绝对路径。默认为 $MCP_DATA_DIR/.ofw-mcp/session.json
    查看英文原文Absolute path for the session cache file. Defaults to $MCP_DATA_DIR/.ofw-mcp/session.json.
  • OFW_EXPENSE_ONLY 设为 true 时仅注册 healthcheck 和报销相关工具。个人资料/仪表板、消息、日历和日记工具在结构上都不会存在。
    查看英文原文Set true to register only healthcheck plus expense tools. All profile/dashboard, message, calendar, and journal tools are structurally absent.
  • OFW_EXPENSE_UPLOAD_ONLY 设为 true 启用严格的报销上传模式:仅注册 healthcheck、ofw_upload_expense_pdf、ofw_create_expense 和 ofw_update_expense。不包括 ofw_mark_expense_reimbursed。隐含 OFW_EXPENSE…
    查看英文原文Set true for strict reimbursement upload mode: only healthcheck, ofw_upload_expense_pdf, ofw_create_expense, and ofw_update_expense register. Excludes ofw_mark_expense_reimbursed. Implies OFW_EXPENSE…
  • OFW_INLINE_ATTACHMENTS 设置为"true"时,默认将附件作为 MCP 内容块返回(图片直接显示,其他文件以嵌入资源形式返回),而不是写入磁盘。调用方仍可按每次调用进行覆盖……
    查看英文原文Set "true" to return attachments as MCP content blocks by default (images render directly; other files come back as embedded resources) instead of writing to disk. Callers can still override per call…
  • OFW_ATTACHMENTS_DIR Where ofw_download_attachment writes (default ~/Downloads/ofw-mcp). Every disk write is confined to it: a saveTo outside it (after resolving symlinks) is refused, and an existing file is replaced onl…
  • OFW_UPLOAD_DIR ofw_upload_attachment 唯一可读取的目录(默认值:OFW_ATTACHMENTS_DIR)。解析符号链接后位于该目录之外的路径、隐藏文件或目录以及超过 25 MiB 的文件都会被拒绝。
    查看英文原文The only directory ofw_upload_attachment may read from (default: OFW_ATTACHMENTS_DIR). Paths outside it after resolving symlinks, hidden files/dirs, and files over 25 MiB are refused.
  • OFW_CACHE_IDENTITY Explicit cache-key label; overrides OFW_USERNAME for fetchproxy-only multi-account setups. If you have multiple OFW accounts and want them to use separate caches, set it to a label per profile.
  • OFW_CACHE_DIR 覆盖消息缓存目录(默认为 /.cache/ofw-mcp)
    查看英文原文Overrides the message cache directory (default ~/.cache/ofw-mcp).
  • OFW_DISABLE_FETCHPROXY 跳过 fetchproxy 回退机制,使缺失的凭据直接报错(适用于无头 CI)。
    查看英文原文Skip the fetchproxy fallback, so missing credentials become a hard error (useful in headless CI).
  • OFW_AUTO_REFRESH When a cached read comes back EMPTY from a non-fresh cache, the read tools sync the backing folders and answer from the refreshed cache instead of refusing with UNVERIFIED_EMPTY (default off, i.e. re…
  • OFW_FRESHNESS_TTL_SECONDS How long a verified-against-OFW folder stays labelled `fresh` in read tools' `freshness` block (default 300). Unusable values fall back to the default — a typo must never widen the window in which st…
  • OFW_SYNC_MAX_REQUESTS Per-call OFW-request budget for ofw_sync_messages: a positive integer caps how many OFW requests one sync call may make before pausing; the next call resumes where it left off. Unset means unbounded…
  • OFW_REQUEST_TIMEOUT_MS OFW API 调用的单次请求超时时间,单位为毫秒(默认 30000)。每次重试都有各自全新的超时窗口。
    查看英文原文Per-request timeout for OFW API calls, in milliseconds (default 30000). Each retry gets its own fresh window.
  • OFW_DEBUG_LOG 将每个 OFW 请求和响应记录到 stderr(Authorization 已隐藏)。仅用于诊断。
    查看英文原文Log every OFW request/response to stderr (Authorization redacted). Diagnostic only.
  • DISPLAY_TZ IANA zone (e.g. America/New_York, the default) for every ` Display` value, and the zone a NAIVE source timestamp is assumed to be wall-clock in. OFW's API reports naive local times in the account's o…
  • FETCHPROXY_WS_PORT ContextMint Bridge 扩展连接的 fetchproxy 集中器的本地主机端口(默认 37149)。同一台机器上的所有 MCP 共用该端口,因此要么全部更改,要么都不改。
    查看英文原文Localhost port of the fetchproxy concentrator the ContextMint Bridge extension connects to (default 37149). Every MCP on one machine shares it, so move it for all of them or not at all.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR 存储 fetchproxy 长期身份密钥对的绝对路径(默认 /.fetchproxy/identity/)
    查看英文原文Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Ofw MCP

Ofw MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Ofw MCP 的应用

  • 需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Node.js(只需一次)
  • 需要先在电脑上安装 Node.js(只需一次)
  • 需要先在电脑上安装 Node.js(只需一次)

B · 会计、财务与税务 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Ofw MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user ofw -- npx -y ofw-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Ofw MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user ofw -- npx -y ofw-mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 Ofw MCP 在列表中并显示已连接

  5. 试一试

    用 Ofw MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Ofw MCP,或回答中出现 Ofw MCP 的工具名称,就表示连接成功

28 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • OFW_USERNAME 你的 OurFamilyWizard 登录邮箱地址。可选;若省略,服务器将改用 fetchproxy 浏览器扩展(需已登录 ourfamilywizard.com)。
    查看英文原文Your OurFamilyWizard login email address. Optional — if omitted, the server falls back to the fetchproxy browser extension (requires being signed in to ourfamilywizard.com).
  • OFW_PASSWORD 你的 OurFamilyWizard 密码。可选,参见 OFW_USERNAME。
    查看英文原文Your OurFamilyWizard password. Optional — see OFW_USERNAME.
  • OFW_WRITE_MODE Write-tool gate: "none" registers no write tools; "drafts" registers draft-level writes only (save/delete drafts, upload attachments); "all" registers everything (default). Unrecognized values fail c…
  • OFW_CALENDAR_WRITES 设置为"true"可在"drafts"写入模式下注册日历写入工具(创建/更新/删除事件)。事件没有草稿阶段,但可以撤销。永远不会覆盖"none"。
    查看英文原文Set to "true" to register calendar write tools (create/update/delete event) in "drafts" write mode. Events have no draft stage but are reversible. Never overrides "none".
  • OFW_ALLOW_MARK_READ Default "true". Set "false" to forbid any tool from marking a message read on OurFamilyWizard - reading a body for the first time stamps a co-parent-visible "First Viewed" time that cannot be undone.…
  • OFW_CONFIRM_MARK_READ Default "false". Set "true" to show an unread message's subject, sender and sent time and ask for confirmation before opening it marks it read. Sync fetchUnreadBodies asks too; allowMarkRead probes a…
  • OFW_FETCH_UNREAD_BODIES Default "false". Whether ofw_sync_messages fetches unread inbox bodies by default (each fetch stamps a First Viewed time). Capped by OFW_ALLOW_MARK_READ.
  • OFW_READ_DAYS 允许读取消息内容的日期列表,例如 "mon,thu"(工作日、YYYY-MM-DD 或 YYYY-MM-DD..YYYY-MM-DD,以 DISPLAY_TZ 为准)。其他日期:未读收件箱消息仅显示主题,且从不会被标记为已读
    查看英文原文Allow list of days message content may be read, e.g. "mon,thu" (weekdays, YYYY-MM-DD, or YYYY-MM-DD..YYYY-MM-DD, in DISPLAY_TZ). Other days: unread inbox messages show subject only and are never mark…
  • OFW_NO_READ_DAYS 不得打开未读收件箱邮件的日期拒绝列表(格式与 OFW_READ_DAYS 相同;优先于它)。未设置 = 无。
    查看英文原文Deny list of days unread inbox messages may NOT be opened (same format as OFW_READ_DAYS; wins over it). Unset = none.
  • OFW_SESSION_CACHE 设置为 false 可禁用磁盘上的会话缓存,并在每次进程启动时重新进行身份验证。默认启用。
    查看英文原文Set to false to disable the on-disk session cache and re-authenticate on every process start. Defaults to enabled.
  • OFW_SESSION_FILE 会话缓存文件的绝对路径。默认为 $MCP_DATA_DIR/.ofw-mcp/session.json
    查看英文原文Absolute path for the session cache file. Defaults to $MCP_DATA_DIR/.ofw-mcp/session.json.
  • OFW_EXPENSE_ONLY 设为 true 时仅注册 healthcheck 和报销相关工具。个人资料/仪表板、消息、日历和日记工具在结构上都不会存在。
    查看英文原文Set true to register only healthcheck plus expense tools. All profile/dashboard, message, calendar, and journal tools are structurally absent.
  • OFW_EXPENSE_UPLOAD_ONLY 设为 true 启用严格的报销上传模式:仅注册 healthcheck、ofw_upload_expense_pdf、ofw_create_expense 和 ofw_update_expense。不包括 ofw_mark_expense_reimbursed。隐含 OFW_EXPENSE…
    查看英文原文Set true for strict reimbursement upload mode: only healthcheck, ofw_upload_expense_pdf, ofw_create_expense, and ofw_update_expense register. Excludes ofw_mark_expense_reimbursed. Implies OFW_EXPENSE…
  • OFW_INLINE_ATTACHMENTS 设置为"true"时,默认将附件作为 MCP 内容块返回(图片直接显示,其他文件以嵌入资源形式返回),而不是写入磁盘。调用方仍可按每次调用进行覆盖……
    查看英文原文Set "true" to return attachments as MCP content blocks by default (images render directly; other files come back as embedded resources) instead of writing to disk. Callers can still override per call…
  • OFW_ATTACHMENTS_DIR Where ofw_download_attachment writes (default ~/Downloads/ofw-mcp). Every disk write is confined to it: a saveTo outside it (after resolving symlinks) is refused, and an existing file is replaced onl…
  • OFW_UPLOAD_DIR ofw_upload_attachment 唯一可读取的目录(默认值:OFW_ATTACHMENTS_DIR)。解析符号链接后位于该目录之外的路径、隐藏文件或目录以及超过 25 MiB 的文件都会被拒绝。
    查看英文原文The only directory ofw_upload_attachment may read from (default: OFW_ATTACHMENTS_DIR). Paths outside it after resolving symlinks, hidden files/dirs, and files over 25 MiB are refused.
  • OFW_CACHE_IDENTITY Explicit cache-key label; overrides OFW_USERNAME for fetchproxy-only multi-account setups. If you have multiple OFW accounts and want them to use separate caches, set it to a label per profile.
  • OFW_CACHE_DIR 覆盖消息缓存目录(默认为 /.cache/ofw-mcp)
    查看英文原文Overrides the message cache directory (default ~/.cache/ofw-mcp).
  • OFW_DISABLE_FETCHPROXY 跳过 fetchproxy 回退机制,使缺失的凭据直接报错(适用于无头 CI)。
    查看英文原文Skip the fetchproxy fallback, so missing credentials become a hard error (useful in headless CI).
  • OFW_AUTO_REFRESH When a cached read comes back EMPTY from a non-fresh cache, the read tools sync the backing folders and answer from the refreshed cache instead of refusing with UNVERIFIED_EMPTY (default off, i.e. re…
  • OFW_FRESHNESS_TTL_SECONDS How long a verified-against-OFW folder stays labelled `fresh` in read tools' `freshness` block (default 300). Unusable values fall back to the default — a typo must never widen the window in which st…
  • OFW_SYNC_MAX_REQUESTS Per-call OFW-request budget for ofw_sync_messages: a positive integer caps how many OFW requests one sync call may make before pausing; the next call resumes where it left off. Unset means unbounded…
  • OFW_REQUEST_TIMEOUT_MS OFW API 调用的单次请求超时时间,单位为毫秒(默认 30000)。每次重试都有各自全新的超时窗口。
    查看英文原文Per-request timeout for OFW API calls, in milliseconds (default 30000). Each retry gets its own fresh window.
  • OFW_DEBUG_LOG 将每个 OFW 请求和响应记录到 stderr(Authorization 已隐藏)。仅用于诊断。
    查看英文原文Log every OFW request/response to stderr (Authorization redacted). Diagnostic only.
  • DISPLAY_TZ IANA zone (e.g. America/New_York, the default) for every ` Display` value, and the zone a NAIVE source timestamp is assumed to be wall-clock in. OFW's API reports naive local times in the account's o…
  • FETCHPROXY_WS_PORT ContextMint Bridge 扩展连接的 fetchproxy 集中器的本地主机端口(默认 37149)。同一台机器上的所有 MCP 共用该端口,因此要么全部更改,要么都不改。
    查看英文原文Localhost port of the fetchproxy concentrator the ContextMint Bridge extension connects to (default 37149). Every MCP on one machine shares it, so move it for all of them or not at all.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR 存储 fetchproxy 长期身份密钥对的绝对路径(默认 /.fetchproxy/identity/)
    查看英文原文Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Ofw MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "ofw": { "command": "npx", "args": [ "-y", "ofw-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Ofw MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Ofw MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Ofw MCP,或回答中出现 Ofw MCP 的工具名称,就表示连接成功

28 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • OFW_USERNAME 你的 OurFamilyWizard 登录邮箱地址。可选;若省略,服务器将改用 fetchproxy 浏览器扩展(需已登录 ourfamilywizard.com)。
    查看英文原文Your OurFamilyWizard login email address. Optional — if omitted, the server falls back to the fetchproxy browser extension (requires being signed in to ourfamilywizard.com).
  • OFW_PASSWORD 你的 OurFamilyWizard 密码。可选,参见 OFW_USERNAME。
    查看英文原文Your OurFamilyWizard password. Optional — see OFW_USERNAME.
  • OFW_WRITE_MODE Write-tool gate: "none" registers no write tools; "drafts" registers draft-level writes only (save/delete drafts, upload attachments); "all" registers everything (default). Unrecognized values fail c…
  • OFW_CALENDAR_WRITES 设置为"true"可在"drafts"写入模式下注册日历写入工具(创建/更新/删除事件)。事件没有草稿阶段,但可以撤销。永远不会覆盖"none"。
    查看英文原文Set to "true" to register calendar write tools (create/update/delete event) in "drafts" write mode. Events have no draft stage but are reversible. Never overrides "none".
  • OFW_ALLOW_MARK_READ Default "true". Set "false" to forbid any tool from marking a message read on OurFamilyWizard - reading a body for the first time stamps a co-parent-visible "First Viewed" time that cannot be undone.…
  • OFW_CONFIRM_MARK_READ Default "false". Set "true" to show an unread message's subject, sender and sent time and ask for confirmation before opening it marks it read. Sync fetchUnreadBodies asks too; allowMarkRead probes a…
  • OFW_FETCH_UNREAD_BODIES Default "false". Whether ofw_sync_messages fetches unread inbox bodies by default (each fetch stamps a First Viewed time). Capped by OFW_ALLOW_MARK_READ.
  • OFW_READ_DAYS 允许读取消息内容的日期列表,例如 "mon,thu"(工作日、YYYY-MM-DD 或 YYYY-MM-DD..YYYY-MM-DD,以 DISPLAY_TZ 为准)。其他日期:未读收件箱消息仅显示主题,且从不会被标记为已读
    查看英文原文Allow list of days message content may be read, e.g. "mon,thu" (weekdays, YYYY-MM-DD, or YYYY-MM-DD..YYYY-MM-DD, in DISPLAY_TZ). Other days: unread inbox messages show subject only and are never mark…
  • OFW_NO_READ_DAYS 不得打开未读收件箱邮件的日期拒绝列表(格式与 OFW_READ_DAYS 相同;优先于它)。未设置 = 无。
    查看英文原文Deny list of days unread inbox messages may NOT be opened (same format as OFW_READ_DAYS; wins over it). Unset = none.
  • OFW_SESSION_CACHE 设置为 false 可禁用磁盘上的会话缓存,并在每次进程启动时重新进行身份验证。默认启用。
    查看英文原文Set to false to disable the on-disk session cache and re-authenticate on every process start. Defaults to enabled.
  • OFW_SESSION_FILE 会话缓存文件的绝对路径。默认为 $MCP_DATA_DIR/.ofw-mcp/session.json
    查看英文原文Absolute path for the session cache file. Defaults to $MCP_DATA_DIR/.ofw-mcp/session.json.
  • OFW_EXPENSE_ONLY 设为 true 时仅注册 healthcheck 和报销相关工具。个人资料/仪表板、消息、日历和日记工具在结构上都不会存在。
    查看英文原文Set true to register only healthcheck plus expense tools. All profile/dashboard, message, calendar, and journal tools are structurally absent.
  • OFW_EXPENSE_UPLOAD_ONLY 设为 true 启用严格的报销上传模式:仅注册 healthcheck、ofw_upload_expense_pdf、ofw_create_expense 和 ofw_update_expense。不包括 ofw_mark_expense_reimbursed。隐含 OFW_EXPENSE…
    查看英文原文Set true for strict reimbursement upload mode: only healthcheck, ofw_upload_expense_pdf, ofw_create_expense, and ofw_update_expense register. Excludes ofw_mark_expense_reimbursed. Implies OFW_EXPENSE…
  • OFW_INLINE_ATTACHMENTS 设置为"true"时,默认将附件作为 MCP 内容块返回(图片直接显示,其他文件以嵌入资源形式返回),而不是写入磁盘。调用方仍可按每次调用进行覆盖……
    查看英文原文Set "true" to return attachments as MCP content blocks by default (images render directly; other files come back as embedded resources) instead of writing to disk. Callers can still override per call…
  • OFW_ATTACHMENTS_DIR Where ofw_download_attachment writes (default ~/Downloads/ofw-mcp). Every disk write is confined to it: a saveTo outside it (after resolving symlinks) is refused, and an existing file is replaced onl…
  • OFW_UPLOAD_DIR ofw_upload_attachment 唯一可读取的目录(默认值:OFW_ATTACHMENTS_DIR)。解析符号链接后位于该目录之外的路径、隐藏文件或目录以及超过 25 MiB 的文件都会被拒绝。
    查看英文原文The only directory ofw_upload_attachment may read from (default: OFW_ATTACHMENTS_DIR). Paths outside it after resolving symlinks, hidden files/dirs, and files over 25 MiB are refused.
  • OFW_CACHE_IDENTITY Explicit cache-key label; overrides OFW_USERNAME for fetchproxy-only multi-account setups. If you have multiple OFW accounts and want them to use separate caches, set it to a label per profile.
  • OFW_CACHE_DIR 覆盖消息缓存目录(默认为 /.cache/ofw-mcp)
    查看英文原文Overrides the message cache directory (default ~/.cache/ofw-mcp).
  • OFW_DISABLE_FETCHPROXY 跳过 fetchproxy 回退机制,使缺失的凭据直接报错(适用于无头 CI)。
    查看英文原文Skip the fetchproxy fallback, so missing credentials become a hard error (useful in headless CI).
  • OFW_AUTO_REFRESH When a cached read comes back EMPTY from a non-fresh cache, the read tools sync the backing folders and answer from the refreshed cache instead of refusing with UNVERIFIED_EMPTY (default off, i.e. re…
  • OFW_FRESHNESS_TTL_SECONDS How long a verified-against-OFW folder stays labelled `fresh` in read tools' `freshness` block (default 300). Unusable values fall back to the default — a typo must never widen the window in which st…
  • OFW_SYNC_MAX_REQUESTS Per-call OFW-request budget for ofw_sync_messages: a positive integer caps how many OFW requests one sync call may make before pausing; the next call resumes where it left off. Unset means unbounded…
  • OFW_REQUEST_TIMEOUT_MS OFW API 调用的单次请求超时时间,单位为毫秒(默认 30000)。每次重试都有各自全新的超时窗口。
    查看英文原文Per-request timeout for OFW API calls, in milliseconds (default 30000). Each retry gets its own fresh window.
  • OFW_DEBUG_LOG 将每个 OFW 请求和响应记录到 stderr(Authorization 已隐藏)。仅用于诊断。
    查看英文原文Log every OFW request/response to stderr (Authorization redacted). Diagnostic only.
  • DISPLAY_TZ IANA zone (e.g. America/New_York, the default) for every ` Display` value, and the zone a NAIVE source timestamp is assumed to be wall-clock in. OFW's API reports naive local times in the account's o…
  • FETCHPROXY_WS_PORT ContextMint Bridge 扩展连接的 fetchproxy 集中器的本地主机端口(默认 37149)。同一台机器上的所有 MCP 共用该端口,因此要么全部更改,要么都不改。
    查看英文原文Localhost port of the fetchproxy concentrator the ContextMint Bridge extension connects to (default 37149). Every MCP on one machine shares it, so move it for all of them or not at all.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR 存储 fetchproxy 长期身份密钥对的绝对路径(默认 /.fetchproxy/identity/)
    查看英文原文Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Ofw MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "ofw": { "type": "stdio", "command": "npx", "args": [ "-y", "ofw-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Ofw MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Ofw MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Ofw MCP,或回答中出现 Ofw MCP 的工具名称,就表示连接成功

28 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • OFW_USERNAME 你的 OurFamilyWizard 登录邮箱地址。可选;若省略,服务器将改用 fetchproxy 浏览器扩展(需已登录 ourfamilywizard.com)。
    查看英文原文Your OurFamilyWizard login email address. Optional — if omitted, the server falls back to the fetchproxy browser extension (requires being signed in to ourfamilywizard.com).
  • OFW_PASSWORD 你的 OurFamilyWizard 密码。可选,参见 OFW_USERNAME。
    查看英文原文Your OurFamilyWizard password. Optional — see OFW_USERNAME.
  • OFW_WRITE_MODE Write-tool gate: "none" registers no write tools; "drafts" registers draft-level writes only (save/delete drafts, upload attachments); "all" registers everything (default). Unrecognized values fail c…
  • OFW_CALENDAR_WRITES 设置为"true"可在"drafts"写入模式下注册日历写入工具(创建/更新/删除事件)。事件没有草稿阶段,但可以撤销。永远不会覆盖"none"。
    查看英文原文Set to "true" to register calendar write tools (create/update/delete event) in "drafts" write mode. Events have no draft stage but are reversible. Never overrides "none".
  • OFW_ALLOW_MARK_READ Default "true". Set "false" to forbid any tool from marking a message read on OurFamilyWizard - reading a body for the first time stamps a co-parent-visible "First Viewed" time that cannot be undone.…
  • OFW_CONFIRM_MARK_READ Default "false". Set "true" to show an unread message's subject, sender and sent time and ask for confirmation before opening it marks it read. Sync fetchUnreadBodies asks too; allowMarkRead probes a…
  • OFW_FETCH_UNREAD_BODIES Default "false". Whether ofw_sync_messages fetches unread inbox bodies by default (each fetch stamps a First Viewed time). Capped by OFW_ALLOW_MARK_READ.
  • OFW_READ_DAYS 允许读取消息内容的日期列表,例如 "mon,thu"(工作日、YYYY-MM-DD 或 YYYY-MM-DD..YYYY-MM-DD,以 DISPLAY_TZ 为准)。其他日期:未读收件箱消息仅显示主题,且从不会被标记为已读
    查看英文原文Allow list of days message content may be read, e.g. "mon,thu" (weekdays, YYYY-MM-DD, or YYYY-MM-DD..YYYY-MM-DD, in DISPLAY_TZ). Other days: unread inbox messages show subject only and are never mark…
  • OFW_NO_READ_DAYS 不得打开未读收件箱邮件的日期拒绝列表(格式与 OFW_READ_DAYS 相同;优先于它)。未设置 = 无。
    查看英文原文Deny list of days unread inbox messages may NOT be opened (same format as OFW_READ_DAYS; wins over it). Unset = none.
  • OFW_SESSION_CACHE 设置为 false 可禁用磁盘上的会话缓存,并在每次进程启动时重新进行身份验证。默认启用。
    查看英文原文Set to false to disable the on-disk session cache and re-authenticate on every process start. Defaults to enabled.
  • OFW_SESSION_FILE 会话缓存文件的绝对路径。默认为 $MCP_DATA_DIR/.ofw-mcp/session.json
    查看英文原文Absolute path for the session cache file. Defaults to $MCP_DATA_DIR/.ofw-mcp/session.json.
  • OFW_EXPENSE_ONLY 设为 true 时仅注册 healthcheck 和报销相关工具。个人资料/仪表板、消息、日历和日记工具在结构上都不会存在。
    查看英文原文Set true to register only healthcheck plus expense tools. All profile/dashboard, message, calendar, and journal tools are structurally absent.
  • OFW_EXPENSE_UPLOAD_ONLY 设为 true 启用严格的报销上传模式:仅注册 healthcheck、ofw_upload_expense_pdf、ofw_create_expense 和 ofw_update_expense。不包括 ofw_mark_expense_reimbursed。隐含 OFW_EXPENSE…
    查看英文原文Set true for strict reimbursement upload mode: only healthcheck, ofw_upload_expense_pdf, ofw_create_expense, and ofw_update_expense register. Excludes ofw_mark_expense_reimbursed. Implies OFW_EXPENSE…
  • OFW_INLINE_ATTACHMENTS 设置为"true"时,默认将附件作为 MCP 内容块返回(图片直接显示,其他文件以嵌入资源形式返回),而不是写入磁盘。调用方仍可按每次调用进行覆盖……
    查看英文原文Set "true" to return attachments as MCP content blocks by default (images render directly; other files come back as embedded resources) instead of writing to disk. Callers can still override per call…
  • OFW_ATTACHMENTS_DIR Where ofw_download_attachment writes (default ~/Downloads/ofw-mcp). Every disk write is confined to it: a saveTo outside it (after resolving symlinks) is refused, and an existing file is replaced onl…
  • OFW_UPLOAD_DIR ofw_upload_attachment 唯一可读取的目录(默认值:OFW_ATTACHMENTS_DIR)。解析符号链接后位于该目录之外的路径、隐藏文件或目录以及超过 25 MiB 的文件都会被拒绝。
    查看英文原文The only directory ofw_upload_attachment may read from (default: OFW_ATTACHMENTS_DIR). Paths outside it after resolving symlinks, hidden files/dirs, and files over 25 MiB are refused.
  • OFW_CACHE_IDENTITY Explicit cache-key label; overrides OFW_USERNAME for fetchproxy-only multi-account setups. If you have multiple OFW accounts and want them to use separate caches, set it to a label per profile.
  • OFW_CACHE_DIR 覆盖消息缓存目录(默认为 /.cache/ofw-mcp)
    查看英文原文Overrides the message cache directory (default ~/.cache/ofw-mcp).
  • OFW_DISABLE_FETCHPROXY 跳过 fetchproxy 回退机制,使缺失的凭据直接报错(适用于无头 CI)。
    查看英文原文Skip the fetchproxy fallback, so missing credentials become a hard error (useful in headless CI).
  • OFW_AUTO_REFRESH When a cached read comes back EMPTY from a non-fresh cache, the read tools sync the backing folders and answer from the refreshed cache instead of refusing with UNVERIFIED_EMPTY (default off, i.e. re…
  • OFW_FRESHNESS_TTL_SECONDS How long a verified-against-OFW folder stays labelled `fresh` in read tools' `freshness` block (default 300). Unusable values fall back to the default — a typo must never widen the window in which st…
  • OFW_SYNC_MAX_REQUESTS Per-call OFW-request budget for ofw_sync_messages: a positive integer caps how many OFW requests one sync call may make before pausing; the next call resumes where it left off. Unset means unbounded…
  • OFW_REQUEST_TIMEOUT_MS OFW API 调用的单次请求超时时间,单位为毫秒(默认 30000)。每次重试都有各自全新的超时窗口。
    查看英文原文Per-request timeout for OFW API calls, in milliseconds (default 30000). Each retry gets its own fresh window.
  • OFW_DEBUG_LOG 将每个 OFW 请求和响应记录到 stderr(Authorization 已隐藏)。仅用于诊断。
    查看英文原文Log every OFW request/response to stderr (Authorization redacted). Diagnostic only.
  • DISPLAY_TZ IANA zone (e.g. America/New_York, the default) for every ` Display` value, and the zone a NAIVE source timestamp is assumed to be wall-clock in. OFW's API reports naive local times in the account's o…
  • FETCHPROXY_WS_PORT ContextMint Bridge 扩展连接的 fetchproxy 集中器的本地主机端口(默认 37149)。同一台机器上的所有 MCP 共用该端口,因此要么全部更改,要么都不改。
    查看英文原文Localhost port of the fetchproxy concentrator the ContextMint Bridge extension connects to (default 37149). Every MCP on one machine shares it, so move it for all of them or not at all.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR 存储 fetchproxy 长期身份密钥对的绝对路径(默认 /.fetchproxy/identity/)
    查看英文原文Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Ofw MCP 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user ofw -- npx -y ofw-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "ofw": {
      "command": "npx",
      "args": [
        "-y",
        "ofw-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "ofw": {
      "command": "npx",
      "args": [
        "-y",
        "ofw-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "ofw": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "ofw-mcp"
      ]
    }
  }
}

需要你填写的值

  • OFW_USERNAME env
    你的 OurFamilyWizard 登录邮箱地址。可选;若省略,服务器将改用 fetchproxy 浏览器扩展(需已登录 ourfamilywizard.com)。
    查看英文原文Your OurFamilyWizard login email address. Optional — if omitted, the server falls back to the fetchproxy browser extension (requires being signed in to ourfamilywizard.com).
  • OFW_PASSWORD 机密 env
    你的 OurFamilyWizard 密码。可选,参见 OFW_USERNAME。
    查看英文原文Your OurFamilyWizard password. Optional — see OFW_USERNAME.
  • OFW_WRITE_MODE env
    Write-tool gate: "none" registers no write tools; "drafts" registers draft-level writes only (save/delete drafts, upload attachments); "all" registers everything (default). Unrecognized values fail c…
  • OFW_CALENDAR_WRITES env
    设置为"true"可在"drafts"写入模式下注册日历写入工具(创建/更新/删除事件)。事件没有草稿阶段,但可以撤销。永远不会覆盖"none"。
    查看英文原文Set to "true" to register calendar write tools (create/update/delete event) in "drafts" write mode. Events have no draft stage but are reversible. Never overrides "none".
  • OFW_ALLOW_MARK_READ env
    Default "true". Set "false" to forbid any tool from marking a message read on OurFamilyWizard - reading a body for the first time stamps a co-parent-visible "First Viewed" time that cannot be undone.…
  • OFW_CONFIRM_MARK_READ env
    Default "false". Set "true" to show an unread message's subject, sender and sent time and ask for confirmation before opening it marks it read. Sync fetchUnreadBodies asks too; allowMarkRead probes a…
  • OFW_FETCH_UNREAD_BODIES env
    Default "false". Whether ofw_sync_messages fetches unread inbox bodies by default (each fetch stamps a First Viewed time). Capped by OFW_ALLOW_MARK_READ.
  • OFW_READ_DAYS env
    允许读取消息内容的日期列表,例如 "mon,thu"(工作日、YYYY-MM-DD 或 YYYY-MM-DD..YYYY-MM-DD,以 DISPLAY_TZ 为准)。其他日期:未读收件箱消息仅显示主题,且从不会被标记为已读
    查看英文原文Allow list of days message content may be read, e.g. "mon,thu" (weekdays, YYYY-MM-DD, or YYYY-MM-DD..YYYY-MM-DD, in DISPLAY_TZ). Other days: unread inbox messages show subject only and are never mark…
  • OFW_NO_READ_DAYS env
    不得打开未读收件箱邮件的日期拒绝列表(格式与 OFW_READ_DAYS 相同;优先于它)。未设置 = 无。
    查看英文原文Deny list of days unread inbox messages may NOT be opened (same format as OFW_READ_DAYS; wins over it). Unset = none.
  • OFW_SESSION_CACHE env
    设置为 false 可禁用磁盘上的会话缓存,并在每次进程启动时重新进行身份验证。默认启用。
    查看英文原文Set to false to disable the on-disk session cache and re-authenticate on every process start. Defaults to enabled.
  • OFW_SESSION_FILE env
    会话缓存文件的绝对路径。默认为 $MCP_DATA_DIR/.ofw-mcp/session.json
    查看英文原文Absolute path for the session cache file. Defaults to $MCP_DATA_DIR/.ofw-mcp/session.json.
  • OFW_EXPENSE_ONLY env
    设为 true 时仅注册 healthcheck 和报销相关工具。个人资料/仪表板、消息、日历和日记工具在结构上都不会存在。
    查看英文原文Set true to register only healthcheck plus expense tools. All profile/dashboard, message, calendar, and journal tools are structurally absent.
  • OFW_EXPENSE_UPLOAD_ONLY env
    设为 true 启用严格的报销上传模式:仅注册 healthcheck、ofw_upload_expense_pdf、ofw_create_expense 和 ofw_update_expense。不包括 ofw_mark_expense_reimbursed。隐含 OFW_EXPENSE…
    查看英文原文Set true for strict reimbursement upload mode: only healthcheck, ofw_upload_expense_pdf, ofw_create_expense, and ofw_update_expense register. Excludes ofw_mark_expense_reimbursed. Implies OFW_EXPENSE…
  • OFW_INLINE_ATTACHMENTS env
    设置为"true"时,默认将附件作为 MCP 内容块返回(图片直接显示,其他文件以嵌入资源形式返回),而不是写入磁盘。调用方仍可按每次调用进行覆盖……
    查看英文原文Set "true" to return attachments as MCP content blocks by default (images render directly; other files come back as embedded resources) instead of writing to disk. Callers can still override per call…
  • OFW_ATTACHMENTS_DIR env
    Where ofw_download_attachment writes (default ~/Downloads/ofw-mcp). Every disk write is confined to it: a saveTo outside it (after resolving symlinks) is refused, and an existing file is replaced onl…
  • OFW_UPLOAD_DIR env
    ofw_upload_attachment 唯一可读取的目录(默认值:OFW_ATTACHMENTS_DIR)。解析符号链接后位于该目录之外的路径、隐藏文件或目录以及超过 25 MiB 的文件都会被拒绝。
    查看英文原文The only directory ofw_upload_attachment may read from (default: OFW_ATTACHMENTS_DIR). Paths outside it after resolving symlinks, hidden files/dirs, and files over 25 MiB are refused.
  • OFW_CACHE_IDENTITY env
    Explicit cache-key label; overrides OFW_USERNAME for fetchproxy-only multi-account setups. If you have multiple OFW accounts and want them to use separate caches, set it to a label per profile.
  • OFW_CACHE_DIR env
    覆盖消息缓存目录(默认为 /.cache/ofw-mcp)
    查看英文原文Overrides the message cache directory (default ~/.cache/ofw-mcp).
  • OFW_DISABLE_FETCHPROXY env
    跳过 fetchproxy 回退机制,使缺失的凭据直接报错(适用于无头 CI)。
    查看英文原文Skip the fetchproxy fallback, so missing credentials become a hard error (useful in headless CI).
  • OFW_AUTO_REFRESH env
    When a cached read comes back EMPTY from a non-fresh cache, the read tools sync the backing folders and answer from the refreshed cache instead of refusing with UNVERIFIED_EMPTY (default off, i.e. re…
  • OFW_FRESHNESS_TTL_SECONDS env
    How long a verified-against-OFW folder stays labelled `fresh` in read tools' `freshness` block (default 300). Unusable values fall back to the default — a typo must never widen the window in which st…
  • OFW_SYNC_MAX_REQUESTS env
    Per-call OFW-request budget for ofw_sync_messages: a positive integer caps how many OFW requests one sync call may make before pausing; the next call resumes where it left off. Unset means unbounded…
  • OFW_REQUEST_TIMEOUT_MS env
    OFW API 调用的单次请求超时时间,单位为毫秒(默认 30000)。每次重试都有各自全新的超时窗口。
    查看英文原文Per-request timeout for OFW API calls, in milliseconds (default 30000). Each retry gets its own fresh window.
  • OFW_DEBUG_LOG env
    将每个 OFW 请求和响应记录到 stderr(Authorization 已隐藏)。仅用于诊断。
    查看英文原文Log every OFW request/response to stderr (Authorization redacted). Diagnostic only.
  • DISPLAY_TZ env
    IANA zone (e.g. America/New_York, the default) for every ` Display` value, and the zone a NAIVE source timestamp is assumed to be wall-clock in. OFW's API reports naive local times in the account's o…
  • FETCHPROXY_WS_PORT env
    ContextMint Bridge 扩展连接的 fetchproxy 集中器的本地主机端口(默认 37149)。同一台机器上的所有 MCP 共用该端口,因此要么全部更改,要么都不改。
    查看英文原文Localhost port of the fetchproxy concentrator the ContextMint Bridge extension connects to (default 37149). Every MCP on one machine shares it, so move it for all of them or not at all.
  • FETCHPROXY_WS_HOST env
    Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR env
    存储 fetchproxy 长期身份密钥对的绝对路径(默认 /.fetchproxy/identity/)
    查看英文原文Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
1,974/周
连接方式
在你的电脑上运行
最新版本i
2.29.1
发布到注册中心i
2026年11月12日
代码最后更新i
2026年11月16日
作者
chrischall
软件包
npm: ofw-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月18日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 chrischall 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于前天

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 ofw-mcp@2.29.1 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/chrischall-ofw-mcp.svg)](https://mcp.popnx.com/en/servers/chrischall-ofw-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“会计、财务与税务”中的其他服务器比较i

  • 星标数多于此分类中其他 3397 个服务器的 97%
  • 发布到注册中心的时间比此分类中其他 3397 个服务器的 83% 更新
  • 基础检查结果等于或优于此分类中其他 3397 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Ofw MCP 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于前天,最新版本(2.29.1)于6天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Node.js。

有什么可以替代它?

同一分类中有:SolidInvoice, Signal8, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Signal8

SEC filings, dilution, insider & institutional ownership, and political-trade data for AI agents.

作者:signal8ai正在增长↓ 431/周★ 4259天前更新

电脑或云端✓ 服务方 · signal8.ai

Journalit

Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.

作者:Cursivez正在增长★ 26010天前更新

在云端运行✓ 服务方 · journalit.co

Beancount.io

Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.

作者:bex-co正在增长★ 688 整个仓库的星标43天前更新

在云端运行✓ 服务方 · beancount.io
与相似项目对比
本项
Ofw MCP
SolidInvoiceSignal8JournalitBeancount.ioTapetide - Indian Stock Market MCP
运行位置需要安装在电脑上在云端运行,无需安装云端或安装在电脑上都可以在云端运行,无需安装在云端运行,无需安装云端或安装在电脑上都可以
需要密钥否否是否否是
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/65/54/44/45/5
许可证MITMITMITNOASSERTIONMITMIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

OurFamilyWizard MCP

A Model Context Protocol server that connects Claude to OurFamilyWizard, giving you natural-language access to your co-parenting messages, calendar, expenses, and journal.

[!WARNING]

AI-developed project. This codebase was entirely built and is actively maintained by Claude Sonnet 4.6. No human has audited the implementation. Review all code and tool permissions before use.

What you can do

Ask Claude things like:

  • *"Show me my recent OFW messages"*
  • *"What's on the kids' calendar next week?"*
  • *"List recent expenses and tell me what I owe"*
  • *"Add a journal entry about today's pickup"*
  • *"Draft a reply to the last message from my co-parent"*

Requirements

Acknowledgement of Terms

By using this MCP server, you acknowledge and agree to the following:

1. This server accesses your own OurFamilyWizard account. Auth happens via your own credentials. It does not — and cannot — access your co-parent's account, your children's accounts, or anyone else's.

2. [OurFamilyWizard's Terms](https://www.ourfamilywizard.com/legal/terms) govern your use of this server, just as they govern your direct use of OFW. There is no explicit anti-scraping clause; the governing language is broader:

Users may not obtain or attempt to obtain any materials or information through any means not intentionally made available.

And on credentials: *"You are solely responsible for (1) maintaining the strict confidentiality of assigned Authentication Methods, (2) instructing any individual to whom the assigned Authentication Method is shared ('Authorized User') to not allow another person to use the Authentication Method."* OFW does contemplate "Authorized Users" and third-party-enabled integrations — but the account holder remains responsible.

You are agreeing to those terms — read by the maintainer 2026-05-23 — every time you invoke a tool in this server.

3. Personal, family use only. This project is not affiliated with, endorsed by, sponsored by, or in partnership with OurFamilyWizard, LLC or its parent. It is a personal automation tool for the named account holder. Do not use it on behalf of a co-parent without their consent, do not share credentials with anyone, and do not use it to bulk-extract another family's data.

4. OFW is a court-of-record platform. Messages, expenses, calendar entries, and journal entries on OFW may be entered into legal proceedings — including custody, divorce, and parenting-plan-modification cases. Anything this server writes to OFW (drafts you save, events you create, expenses you log) will appear with the same legal weight as if you had typed it yourself. Do not let this MCP send a message, create an event, or log an expense that you have not read and approved. Review every write operation before confirming.

5. You accept full responsibility for any consequences — both technical (account warnings, suspension) and legal (anything OFW records about your account activity). The MCP author is not your attorney; if you're using OFW in connection with an active legal matter, talk to your actual attorney before automating anything.

This section is the maintainer's good-faith summary of the terms — it is not legal advice and does not modify or supersede OurFamilyWizard's actual ToS.

Installation

1. Clone and build
git clone https://github.com/chrischall/ofw-mcp.git

cd ofw-mcp npm install npm run build

2. Add to Claude Desktop

Edit your Claude Desktop config file:

  • Mac: ~/Library/Application Support/Claude/claude_desktop_config.json
  • Windows: %APPDATA%\Claude\claude_desktop_config.json

Add the ofw entry inside "mcpServers" (create the key if it doesn't exist):

{

"mcpServers": { "ofw": { "command": "node", "args": ["/absolute/path/to/ofw-mcp/dist/index.js"], "env": { "OFW_USERNAME": "your-email@example.com", "OFW_PASSWORD": "your-ofw-password" } } } }

Replace /absolute/path/to/ofw-mcp with the actual path where you cloned the repo. On Mac, run pwd inside the cloned directory to get it.

3. Restart Claude Desktop

Quit completely (Cmd+Q on Mac, not just close the window) and relaunch.

4. Verify

Ask Claude: *"What does my OFW dashboard look like?"* — it should show your unread message count, upcoming events, and outstanding expenses.

Authentication

ofw-mcp tries three auth paths in order; whichever succeeds first is used. Existing setups keep working unchanged.

  1. Env-var credentials (legacy, recommended for Claude Desktop). Set OFW_USERNAME + OFW_PASSWORD and the server logs in via OFW's form endpoint. This is the path shown in the Claude Desktop config above.
  2. fetchproxy fallback (no env vars needed). When the credentials are absent, the server reads localStorage["auth"] once at startup from your already-signed-in ourfamilywizard.com tab via the ContextMint Bridge browser extension (built on fetchproxy). After that one read, all OFW API calls go directly from Node — the extension is not in the request hot path. Install ContextMint Bridge from its releases page (Chrome: download the Chrome zip, unzip it, and load it unpacked at chrome://extensions with Developer mode on; Safari is not available yet — it will ship inside the ContextMint app, which has no public download — so use Chrome for now), sign into OurFamilyWizard once, and the MCP just works. ContextMint Bridge is the fetchproxy browser extension under its new name, from the same maintainer — fetchproxy's own README (https://github.com/chrischall/fetchproxy#extension) points to it. Its source is public at https://github.com/nullnet-app/contextmint-bridge: build it yourself, or check a release zip against the .sha256 file published beside it (shasum -a 256 -c contextmint-bridge-chrome- .zip.sha256). If you have multiple OFW accounts and want them to use separate caches, set OFW_CACHE_IDENTITY to a label per profile.
  3. Error. If neither path is available, the server tells you exactly which fix to apply. Set OFW_DISABLE_FETCHPROXY=1 to skip the fetchproxy fallback entirely (turns missing credentials into a hard error — useful in headless CI).
Credential options (env-var path)

Option A — env block in Claude Desktop config (shown above, recommended):

"env": {

"OFW_USERNAME": "your-email@example.com", "OFW_PASSWORD": "your-ofw-password" }

Option B — `.env` file in the project directory:

cp .env.example .env

edit .env and fill in your credentials

Environment variables always take priority over the .env file. You can also pass them directly on the command line:

OFW_USERNAME=you@example.com OFW_PASSWORD=yourpass node dist/index.js

Available tools

Read-only tools run automatically. Writes that reach your co-parent or the court-visible record — Confirm (server) below — are confirmed by the server itself before anything is sent (see Server-side confirmation); the other writes rely on your MCP host's own approval prompt (Confirm). The *Write mode* column shows the minimum OFW_WRITE_MODE a tool needs to be available at all — see Write protection below.

ToolWhat it doesPermissionWrite mode
ofw_get_profileYour profile and co-parent infoAutoany
ofw_get_notificationsDashboard counts (unread messages, upcoming events, outstanding expenses). Updates your co-parent-visible last-seen status, so it is not marked read-onlyConfirmany
ofw_list_message_foldersFolders with unread counts — get folder IDs here before listing messagesAutoany
ofw_list_messagesMessages in a folderAutoany
ofw_get_messageFull content of a single messageAutoany
ofw_sync_messagesSync messages into the local cache and list every new message (newMessages). Unread inbox bodies are left unfetched, so a sync never marks anything read unless you ask for it; if it ever does, the response says so (warning, markedRead)Autoany
ofw_get_unread_sentSent messages a recipient hasn't read yet (from local cache)Autoany
ofw_check_freshnessCheap live check that the cache still matches OFW — per id, whether it is still a draft or was sent/deleted, without a full syncAutoany
ofw_statusOne live call for "where does everything stand?" — the full verified draft inventory, and the current state of any ids or draft keysAutoany
ofw_download_attachmentDownload a message attachment to disk, inline as extracted content / bytes, or (hosted) as a private expiring linkAutoany
ofw_send_messageSend a messageConfirm (server)all
ofw_list_draftsDraft messagesAutoany
ofw_save_draftCreate or update a draftConfirmdrafts
ofw_delete_draftDelete a draftConfirmdrafts
ofw_upload_attachmentUpload files to My Files — from a hosted session via signed upload slots (uploadSlots → PUT → blobKeys) or base64 inline; locally from the upload directory (path). Returns fileIds to attach via ofw_send_message/ofw_save_draft (which can also take inlineAttachments/blobKeys directly). Sharing (shareClass: SHARED) needs mode allAuto (PRIVATE) / Confirm (server) (SHARED)drafts
ofw_list_eventsCalendar events and custody handoffs in a date range; filter with types, read in a per-call timeZone, or get iCalendar text with format: "ics"Autoany
ofw_save_calendar_icsSave a date range as an .ics file — custody schedule included, which OFW's own export leaves out. A private, expiring download link on a hosted connector; a file in the attachments directory locallyAutoany
ofw_create_eventCreate a calendar eventConfirm (server) unless privateall (or drafts + OFW_CALENDAR_WRITES)
ofw_update_eventUpdate a calendar eventConfirm (server) if sharedall (or drafts + OFW_CALENDAR_WRITES)
ofw_delete_eventDelete a calendar eventConfirm (server) if sharedall (or drafts + OFW_CALENDAR_WRITES)
ofw_get_expense_totalsExpense summary totalsAutoany
ofw_list_expensesExpense historyAutoany
ofw_list_expense_categoriesExpense category ids and split metadataAutoany
ofw_upload_expense_pdfUpload a receipt PDF to My Files for an expense (SHARED — the co-parent sees it in My Files at once, even on a private expense)Confirm (server)all
ofw_create_expenseLog a new expense; supports private entries and one receipt PDFConfirm (server)all
ofw_mark_expense_reimbursedIrreversibly record full remaining external reimbursement; no transfer or partial payment; unavailable in upload-only modeConfirm (server)all
ofw_update_expenseChange an expense, e.g. publish a private one. Pass only the fields to change; it reads the expense first so the rest are keptConfirm (server)all
ofw_list_journal_entriesJournal entriesAutoany

| ofw_create_journal_entry | Create a journ

只显示了开头部分;其余内容请在仓库中阅读