原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

LaTeX Look

作者:fangchenghao版本 0.4.3i★ 0i在你的电脑上运行代码仓库 ↗
注册名称io.github.fangchenghao/latex-look

安装方法

What it does

Compile a LaTeX page, see it rendered, map a PDF point back to source, and diff builds.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 旅行、地图与天气

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度14/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分26/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 LaTeX Look。按照 https://mcp.popnx.com/i/fangchenghao-latex-look.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月18日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server LaTeX Look,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "latex-look": { "command": "npx", "args": [ "-y", "@fffangchenghao/dsh-latex-look", "mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 LaTeX Look 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "latex-look": {
          "command": "npx",
          "args": [
            "-y",
            "@fffangchenghao/dsh-latex-look",
            "mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 LaTeX Look 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 LaTeX Look,或回答中出现 LaTeX Look 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 LaTeX Look

LaTeX Look 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 LaTeX Look 的应用

  • 需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Node.js(只需一次)
  • 需要先在电脑上安装 Node.js(只需一次)
  • 需要先在电脑上安装 Node.js(只需一次)

B · 旅行、地图与天气 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server LaTeX Look,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user latex-look -- npx -y @fffangchenghao/dsh-latex-look mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 LaTeX Look 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user latex-look -- npx -y @fffangchenghao/dsh-latex-look mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 LaTeX Look 在列表中并显示已连接

  5. 试一试

    用 LaTeX Look 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 LaTeX Look,或回答中出现 LaTeX Look 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server LaTeX Look,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "latex-look": { "command": "npx", "args": [ "-y", "@fffangchenghao/dsh-latex-look", "mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 LaTeX Look 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 LaTeX Look 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 LaTeX Look,或回答中出现 LaTeX Look 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Node.js(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server LaTeX Look,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "latex-look": { "type": "stdio", "command": "npx", "args": [ "-y", "@fffangchenghao/dsh-latex-look", "mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 LaTeX Look 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Node.js(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    node -v
    • 显示版本号(例如 v26.13.1)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令

    打开 Node.js 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v

    安装一次,所有需要 Node.js 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 LaTeX Look 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 LaTeX Look,或回答中出现 LaTeX Look 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 LaTeX Look 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user latex-look -- npx -y @fffangchenghao/dsh-latex-look mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "latex-look": {
      "command": "npx",
      "args": [
        "-y",
        "@fffangchenghao/dsh-latex-look",
        "mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "latex-look": {
      "command": "npx",
      "args": [
        "-y",
        "@fffangchenghao/dsh-latex-look",
        "mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "latex-look": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@fffangchenghao/dsh-latex-look",
        "mcp"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
435/周
连接方式
在你的电脑上运行
最新版本i
0.4.3
发布到注册中心i
2026年11月18日
代码最后更新i
2026年11月18日
作者
fangchenghao
软件包
npm: @fffangchenghao/dsh-latex-look
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 fangchenghao 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于昨天

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

尚未检查

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/fangchenghao-latex-look.svg)](https://mcp.popnx.com/en/servers/fangchenghao-latex-look)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“旅行、地图与天气”中的其他服务器比较i

  • 星标数多于此分类中其他 1998 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 1998 个服务器的 96% 更新
  • 基础检查结果等于或优于此分类中其他 1998 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

LaTeX Look 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于昨天,最新版本(0.4.3)于昨天进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Node.js。

有什么可以替代它?

同一分类中有:Mu, Award Travel Finder, Killbottleneck, Whimsical, HasData Google Maps

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Mu

News, web search, mail, markets, weather, places, files, calendar, contacts. 67 tools, one endpoint.

作者:micro正在增长★ 4404个月前更新

在云端运行✓ micro.mu

Killbottleneck

Free-to-self-host goal and process maps for humans and AI agents, with REST API and MCP.

作者:tengolabs起步阶段↓ 328/周★ 1412天前更新

在你的电脑上运行✓ 服务方 · killbottleneck.com

Whimsical

Create and edit flowcharts, mind maps, wireframes, and docs in Whimsical, or search your workspace.

作者:WhimsicalCode起步阶段★ 112个月前更新

在云端运行✓ 服务方 · whimsical.com

HasData Google Maps

Google Maps places, reviews, contributor history, photos and posts as JSON. No Google Cloud.

作者:HasData起步阶段↓ 107/周★ 102个月前更新

电脑或云端✓ 服务方 · hasdata.com
与相似项目对比
本项
LaTeX Look
MuAward Travel FinderKillbottleneckWhimsicalHasData Google Maps
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装需要安装在电脑上在云端运行,无需安装云端或安装在电脑上都可以
需要密钥否否否是否是
可在 Claude 中按 + 添加否否否否是否
基础检查3/34/43/33/34/45/5
许可证MITAGPL-3.0MITMITMITMIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

latex-look — teach an agent to *see* your LaTeX

English · 简体中文

*Left: compiles with zero errors. Right: after five sentences a reader could say out loud — "remove the rules around the title", "this table is a grid, make it a booktabs table", "that link runs off the page", "the figure is too wide". Try it yourself in examples/broken-layout.*

A DeepSeek Harness plugin that adds exactly one tool: latex_look.

An agent that only reads .tex source is blind: a document can compile with zero errors and still look wrong. latex_look compiles the document, renders the page as an image, maps any spot on that page back to the exact source line, and diffs what your last edit changed — in a single call.

        ┌─────────────┐   latex_look   ┌──────────────┐

│ agent │ ─────────────► │ pdf → png │ │ (edits .tex)│ │ synctex │ └─────────────┘ ◄───────────── │ pixel diff │ ▲ image + line └──────────────┘ └─────────────── verification ───────────┘

Read the case study: a 215-page LaTeX book, read the way a reader reads it — 163 figures, 129 equations, six classes of defect that compile cleanly.

Why one tool, not three

Rendering, locating, and diffing are the *implementation*. The agent needs one coherent verb — "look at this page" — the same way a person does. latex_look compiles, renders, resolves, and diffs in a single call, so the loop is:

look → diagnose → edit .tex → look again → confirm the change → report

Install

Requires Node ≥ 18, a TeX engine (xelatex/lualatex/pdflatex/latexmk or tectonic), synctex, and ghostscript.

This repository is the bundle: package.json declares dsh.bundle.patch, and cordis.patch.yml inserts one row.

git clone https://github.com/fangchenghao/latex-look

Then install it into the current profile (in the Harness, via the plugin manager):

plugin_manager  action: install_bundle  target: /absolute/path/to/latex-look

That adds the row latex-look and registers the latex_look tool. Replacing the sources of an already-installed package needs a Harness restart to load a fresh module generation.

Published on npm as @fffangchenghao/dsh-latex-look, so the same row also installs straight from the registry:

plugin_manager  action: install_bundle  target: @fffangchenghao/dsh-latex-look
Updating

Two different facts, and the plugin reports them separately because confusing them is how an update goes missing:

A newer release exists. The registry is asked once a day, in the background; when something newer is published, one line is appended to a tool reply. An offline machine sees nothing at all, and an unreachable registry is never reported as "up to date".

A newer release is already installed. This is the one that silently bites. An updater replaces the package directory while the old code keeps running, so the running code goes on reading its version out of a package.json that was swapped underneath it — it reports the *new* number while executing the *old* code, and everything looks current. The plugin therefore remembers the version it started with, re-reads the disk at most once a minute, and when the two disagree says so:

note: @fffangchenghao/dsh-latex-look 0.4.2 is installed on disk, but this process is

still running 0.4.1 — restart DeepSeek Harness to load it.

The plugin does not update itself. Replacing the files of a running process is the profile's job, not a tool's: an updater plugin already installed in the profile does it, or you do it by hand. When the plugin can tell which profile it was installed into, it prints the exact command — the profile name is read off its own path, because they are called desktop and web and a guess sends you to an install that does nothing:

dsh plugin --profile desktop add @fffangchenghao/dsh-latex-look@latest

core.mjs is not hot-reloaded, so a plugin update takes effect on the next start of the harness, never mid-session.

From a checkout, both questions are available directly:

node bin/latex-look.mjs --version

node bin/latex-look.mjs --check-update

Releasing

Tagging v* runs the platform and MCP suites on Ubuntu with TeX and Ghostscript installed, verifies the tag matches package.json, and publishes to npm. The full npm test suite is the local gate. The token comes from the NPM_TOKEN repository secret.

Optional: the knowledge skill

The tool gives the agent eyes. SKILL.md gives it the LaTeX knowledge to act on what it sees — a symptom → cause → fix playbook (a rule you want gone is usually \pagestyle/fancyhdr, not a stray \hline). Copy or symlink it into the skills root:

mkdir -p ~/.dsh/skills/latex-look

ln -sf "$PWD/SKILL.md" ~/.dsh/skills/latex-look/SKILL.md

CLI, for humans and for testing
node bin/latex-look.mjs book.tex --page 37

node bin/latex-look.mjs book.tex --text "表3.1" node bin/latex-look.mjs book.tex --page 12 --compare previous --json node bin/latex-look.mjs book.tex --page 1 --audit # what did the last edit break, anywhere?

The CLI runs the same engine as the plugin and needs no Harness, which makes it the fast way to check a change without reloading anything.

MCP server, for Claude Desktop, Cursor and Codex

The same engine ships as a Model Context Protocol server, so a client that has never heard of DSH can use it. It is the same look() and the same words in the reply — the plugin is the Harness shape, this is the universal one.

{

"mcpServers": { "latex-look": { "command": "npx", "args": ["-y", "@fffangchenghao/dsh-latex-look", "mcp"] } } }

Put that in claude_desktop_config.json (Claude Desktop), ~/.cursor/mcp.json (Cursor), or as a TOML block in ~/.codex/config.toml:

[mcp_servers.latex-look]

command = "npx" args = ["-y", "@fffangchenghao/dsh-latex-look", "mcp"]

It exposes one tool, latex_look, with the same parameters as everywhere else: file, page, text, pointX/pointY, compare, audit, sequence, dpi. Pages come back as image content blocks, so the model sees the page itself.

Requirements are the usual ones — a TeX engine and ghostscript on PATH:

brew install --cask mactex-no-gui ghostscript     # macOS

sudo apt install texlive-xetex ghostscript # Debian/Ubuntu winget install MiKTeX.MiKTeX ArtifexSoftware.GhostScript # Windows

On Windows nothing has to be added to PATH: the plugin asks for gswin64c (that is Ghostscript's real name there), and when that is not found it looks in C:\Program Files\gs\gs*\bin, plus the TeX Live, MiKTeX and TinyTeX install directories. If you would rather be explicit, point PATH at C:\Program Files\gs\gs10.05.1\bin and it is used first.

Nothing is uploaded: every call compiles the document that is already on your disk.

Listed in the official MCP Registry as io.github.fangchenghao/latex-look, so clients that search the registry can install it by name, and on awesome-mcp-servers.

Tests

Ten suites run on a clean checkout. Integration cases create their own fixtures and compile real documents; unit cases and two CLI option/error probes use controlled inputs or stubs. Expect a few minutes (npm test runs these, in this order):

node test/platform.mjs        # win32 branches of PATH/PATHEXT/Ghostscript lookup, on any OS

node test/smoke.mjs # unit level: problem parsing, PPM, raster diff, aux detection node test/scenarios.mjs # 52 end-to-end cases driven through index.js node test/scenarios-deep.mjs # 34 cases: multi-file papers, beamer, twocolumn, images,

engine switching, the build cache, hostile inputs

node test/cli.mjs # the CLI's own argument handling, through the real binary node test/mcp.mjs # the MCP server on the wire: handshake, schema, real call node test/review-core.mjs # restored timestamps, concurrent renders, snapshots, inputs node test/review-sequence.mjs # complete label scans and TOC pass semantics node test/review-audit.mjs # blank/failed builds must not become clean baselines node test/review-update.mjs # loaded version vs disk, semver precedence

Optional book suites (not part of npm test):

node test/book-scenarios.mjs  # 15 cases against a real 208-page book (164 .tex files)

node test/book-tasks.mjs # 18 real editing tasks on the same book (see below) LATEX_LOOK_BOOK=/pristine/copy node test/book-tasks.mjs # point it at an unedited copy

The book suite needs a real book and is skipped unless you point it at one:

LATEX_LOOK_BOOK=/path/to/book node test/book-scenarios.mjs

These two suites matter most, because a real book is root → \input{main} → \input{chap1}, with a custom .sty, 181 figures, a glossary and fancyhdr page furniture.

book-scenarios checks the machinery on that book. book-tasks checks the *requests*: each case is a sentence a user would say, applied to the copy and then verified the way an agent verifies it — look, diff against the previous build, and confirm the change is where the edit acts:

user saysmeasured
把页眉那条横线去掉0.09%, bbox y=52 h=1 (a thin band at the top)
页眉的线太细,加粗到 2pt0.27%, bbox y=52 h=3
链接的蓝色去掉0.29%, bbox over the contents page
行距调大一点10.53%, 208 → 248 pages
表格行距加大9.07%
chap2 那个总结框太窄,放宽7.39%
chap1 那个图太小,放大10.57%
chap4 那组图对齐时右边空着8.81%
段落首行不要缩进14.07%
页边距太窄13.32%, 208 → 226 pages
正文字号改成 12pt11.63%, 208 → 226 pages
目录只显示到章2.19%, 208 → 207 pages

Nothing in these cases is asserted about how the change *looks* — that is what the image is for. The assertions are: the build succeeded, a diff exists, and its bounding box is in the region the edit acts on.

Both end-to-end suites stub only @deepseek-ai/dsh-tools (it exists solely inside the Harness) and call the real execute with real arguments, so they exercise the argument handling and the exact text the model reads — not just lib/core.mjs. That matters: several bugs found this way lived only in the formatting layer.

The page SyncTeX names is not always the page it is on

SyncTeX records the page a box was built on. A float that TeX moves to the next page gets the previous page's number, so text: "Version 0.5" used to answer "page 205" for a table that ships on 206 — and page 205 is a different chapter. The tool now checks the PDF's own text layer (gs -sDEVICE=txtwrite, ~0.12 s a page) and looks one and two pages either side; when it overrules SyncTeX it says so.

One picture, not two

A compare call writes three images, but the one to show the user is images.sideBySide: the page before on the left, the page after on the right, one PNG. Finding the difference by eye across two separate files is the hardest part of the job for someone who cannot read the source.

Writing a PNG needs no dependency — a signature, IHDR, one zlib IDAT, IEND, and node:zlib supplies the compression. The composite costs about 0.3 s on an A4 page at 140 dpi, and only runs when there is something to compare.

Performance

Verifying an edit always co

只显示了开头部分;其余内容请在仓库中阅读