原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Assurance

作者:i-ops-hq版本 0.5.10i★ 6i在你的电脑上运行代码仓库 ↗
注册名称io.github.i-ops-hq/assurance-mcp

安装方法

What it does

Checks what an agent did NOT read. Coverage over a retrieval step or a folder.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度10/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分22/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Assurance。按照 https://mcp.popnx.com/i/i-ops-hq-assurance-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Assurance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "assurance": { "command": "uvx", "args": [ "assurance-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Assurance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "assurance": {
          "command": "uvx",
          "args": [
            "assurance-mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 Assurance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Assurance,或回答中出现 Assurance 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Assurance

Assurance 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Assurance 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Assurance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user assurance -- uvx assurance-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Assurance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user assurance -- uvx assurance-mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 Assurance 在列表中并显示已连接

  5. 试一试

    用 Assurance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Assurance,或回答中出现 Assurance 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Assurance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "assurance": { "command": "uvx", "args": [ "assurance-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Assurance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Assurance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Assurance,或回答中出现 Assurance 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Assurance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "assurance": { "type": "stdio", "command": "uvx", "args": [ "assurance-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Assurance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Assurance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Assurance,或回答中出现 Assurance 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Assurance 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user assurance -- uvx assurance-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "assurance": {
      "command": "uvx",
      "args": [
        "assurance-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "assurance": {
      "command": "uvx",
      "args": [
        "assurance-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "assurance": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "assurance-mcp"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
74/周
许可证i
Apache-2.0
连接方式
在你的电脑上运行
最新版本i
0.5.10
分类i
其他
发布到注册中心i
2026年10月28日
代码最后更新i
2026年11月19日
作者
i-ops-hq
软件包
pypi: assurance-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 i-ops-hq 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于今天

  • ✓ 通过

    有许可证

    使用 Apache-2.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 assurance-mcp@0.5.10 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/i-ops-hq-assurance-mcp.svg)](https://mcp.popnx.com/en/servers/i-ops-hq-assurance-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20693 个服务器的 95%
  • 发布到注册中心的时间比此分类中其他 20693 个服务器的 66% 更新
  • 基础检查结果等于或优于此分类中其他 20693 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Assurance 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于今天,最新版本(0.5.10)于22天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Assurance
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

assurance

Your AI agent says it's done. Assurance tells you what it didn't check.

Quick start · Co-change · Use cases · Commands · After every turn · Workflow · Feedback


Coding agents finish with *"All done — tests pass."* Assurance reads what actually happened and tells you, in plain sentences, what was done, what was skipped, and what it could not verify.

Quick start

Run this in any project where you've used Claude Code or Codex:

uvx assurance audit                        # with uv: runs it without installing anything

pip install assurance && assurance audit # without uv

It reads the newest session either agent left for this folder — nothing to configure, and no flag saying which one you used. Used neither yet? uvx assurance audit --demo shows the report on a bundled sample session.

Don't have uvx ? It comes with uv . One line to install it:

wherecommand
macOS (Homebrew)brew install uv
macOS / Linux`curl -LsSf https://astral.sh/uv/install.sh \sh`
Windows`powershell -ExecutionPolicy ByPass -c "irm https://astral.sh/uv/install.ps1 \iex"`
Windows (WinGet)winget install --id=astral-sh.uv -e
anywhere with Pythonpipx install uv or pip install uv

Open a new terminal afterwards so uvx is on your PATH. Or skip uv entirely and use pip install assurance, which gives you the same assurance command.

Here is the real output on a sample session in this repo. The agent was asked to fix a rounding bug in invoice.py *"and make sure pytest -q tests/test_invoice.py passes"*, and ended with *"All done — the totals are correct now."*

$ assurance audit examples/audit/sample-session.jsonl

Claude Code session demo-8f2 — 13 min in /home/you/my-app 10 tool calls, 3 failed — Bash 6, Edit 2, Grep 1, Read 1

Looped: 3 rounds of Bash pytest -q tests/test_invoice.py failing the same way, with nothing new read After the last edit (14:09): no test or check it recognises; 2 unclassified commands ran after it (make lint-fix, python script) Against the last prompt (14:00, "The invoice totals are off by a cent for EUR. Fix it in inv…"): invoice.py: changed at 14:04 (src/billing/invoice.py). pytest -q tests/test_invoice.py: did not run after the last edit to src/billing/rates.py (14:09); it last failed at 14:08, before that. Only what the last prompt names is checked here; whether the work does what it asks is not. Not classified: 2 shell commands (make lint-fix, python script), so whether they read, wrote or tested anything is unknown. Also in the transcript: 1 assistant turn, 1 user turn, 1 bookkeeping record. Not read: 0 lines.

What "All done" left out:

  • ❌ The tests failed three times in a row, the same way each time.
  • ❔ No test it recognises ran after the last edit. Two commands did, and it can't vouch for them either way, so it names them. Silence is not a pass.
  • ❔ The test the prompt asked for last ran before the last edit, and failed. The file it named was changed. Whether the fix is right is not something it claims to know, and it says so.

In use

The plugin figures are Anthropic's, from the Claude plugin directory. The download figures are PyPI's, via pypistats.org. This tool has no server, no account and no telemetry of its own.

The Claude Code plugin, over 30 days

Loads128,018
Load errors0
Failed installs0
Command errors0

PyPI downloads, all time

PackageTotalExcluding mirrors
assurance46,00733,158
assurance-cli48,63833,018
assurance-budget48,57632,832
assurance-core40,69832,663
assurance-deps30,60828,165
assurance-authority30,18828,045
assurance-reach27,40426,648
assurance-mcp20,4505,243

Read 2026-11-12 05:36 UTC. PyPI data complete through 2026-11-11.

What usually changes with what you just changed

The other half of an unfinished change is the file you forgot. assurance coupling reads your git history — no graph, no configuration, no model — and names what travels with the files you touched and that you have not touched this time.

uvx assurance coupling    # in any git repository

Run in this repository with nothing changed, it falls back to the repository as a whole, and the first thing it says is about its own release process:

  plugins/assurance/.claude-plugin/plugin.json

plugins/assurance/scripts/assurance.sh 34 of its 35 commits 4.8x chance packages/assurance/pyproject.toml 34 of its 35 commits 4.4x chance packages/assurance/README.md 35 of its 35 commits 4.0x chance packages/assurance/CHANGELOG.md 34 of its 35 commits 4.1x chance

The release version lives in those files and they move as one set. Twice in one day the author of this paragraph moved some of them and not the others, and a test caught it both times. The tool had already said so, from history, before either mistake.

Every report ends with the git log command that checks its own first line, so you never have to take its word for it.

Use cases

Where Assurance sits in the work you already do. Each page is short: what goes wrong, where it sits, the lines that set it up.

Your workWhat it checks for you
Payments and fintechThe tests your money code depends on ran after the last edit, and passed, before anything ships
Banking and regulated changeA record per session of what changed and what was tested, and whether the asker is cleared for every owner the change reaches
Healthcare and life sciencesProtected paths an agent changed without being asked; what an install will run, before it runs
Legal, insurance and documentsWhether a research agent read every document the question needs; missing periods in a folder of reports
Platform, DevOps and SREPushes, deploys and migrations over untested code; what a change reaches; limits a session cannot raise
Teams building their own agentsYour agent's "done" and its gate's "allow", held against what then happened, from a run record or OTel traces
prompt ─▶ agent edits ─▶ note ─▶ tests ─▶ suggested review ─▶ push / deploy ─▶ stop and check ─▶ CI gate

Commands

One install, one assurance command.

CommandWhat it answers
assurance auditWhat did the Claude Code or Codex session in this folder, or your own agent's run or trace, do, and what did it skip?
assurance hookRun that audit after every Claude Code turn, or stop running it: install, remove, status.
assurance noticesAfter each thing the hook said, did the next turn run the test, fix the failure or put the file back? Read from this machine's transcripts; nothing is sent.
assurance serveA local endpoint any agent sends its traces or runs to, and any workflow asks for a run's audit.
assurance couplingWhat usually changes with what you just changed, from git history — and which of those you have not touched. No graph, no configuration.
assurance reachWhat does a change to this file reach, by a code graph such as Graphify's, and how far behind the code is that graph?
assurance clearanceIs the person who asked cleared for every owner their change reaches?
assurance diffDid the work cover everything it should have? For example, retrieved docs vs. required docs.
assurance pinDid an MCP server quietly change a tool's description after you approved it?
assurance depsWhat will pip install or npm install run on your machine? Read without running it.
assurance budgetWhere did an agent run's budget go, and where did it loop?
assurance authorityMay this task go ahead for the person who asked, without borrowing someone else's access?
assurance checkIs a folder of dated reports complete, and which periods are missing?

Every command works as a CI gate as it is:

| Exit code | Meaning | |:-:|---| | 0 | Checked, found nothing | | 1 | Something to look at, including something it couldn't check | | 2 | Couldn't run |

Run it after every turn, if you want that

Everything above is something you run. This is the same audit as a Stop hook, running itself each time Claude finishes a turn, which some people want and some people do not.

Worth knowing before you turn it on: keeping an agent working until a condition holds is something Claude Code ships on its own, with /goal. What that condition is judged against is the difference. /goal's own documentation says its evaluator *"doesn't run commands or read files independently"* and *"can only judge what Claude has already surfaced in the conversation"* — so an agent that says the tests passed can satisfy it by saying so. This reads the session's tool records and computes whether a test actually ran after the last edit, from the exit status that was recorded. Neither is better at everything; they answer different questions, and only one of them is unimpressed by a confident sentence.

It speaks only when there is something to say, at one of three levels, named first:

LevelWhenWho is asked
noteCode changed this turn and nothing has tested it yetYou, once, with the command to run. Claude is not asked anything
suggested reviewA test failed after the last edit, a protected path changed, or Claude says the tests pass with nothing behind itYou, and Claude: fix it or say why not
stop and checkUntested code was pushed, merged, published, deployed, migrated or committed on mainYou, and Claude: verify it before anything builds on it
assurance · note: no test or check has passed since the last edit to src/billing/invoice.py (14:04). Run pytest -q tests/test_invoice.py before you commit or push.

assurance · suggested review: the last test run after the last edit to src/billing/invoice.py (14:04) failed: pytest -q tests/test_invoice.py (tests/test_invoice.py::test_eur_rounding; 1 failed, 11 passed in 0.33s). assurance · stop and check: pushed at 14:06 with no passing test or check after the last edit to src/billing/invoice.py (14:04).

uvx assurance@latest hook install   # shows the change to ~/.claude/settings.json, asks, then writes it

uvx assurance

只显示了开头部分;其余内容请在仓库中阅读