Medplum MCP
Securely access and manage FHIR healthcare data stored in Medplum.
MCP server for Bluetooth LE health sensors (standard GATT profiles).
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Bluetooth LE Health Sensors。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-ble-health.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Bluetooth LE Health Sensors,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Bluetooth LE Health Sensors 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-ble-health": {
"command": "uvx",
"args": [
"labmcp-ble-health"
]
}
}
}用 Bluetooth LE Health Sensors 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Bluetooth LE Health Sensors,或回答中出现 Bluetooth LE Health Sensors 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Bluetooth LE Health Sensors
Bluetooth LE Health Sensors 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 Bluetooth LE Health Sensors 的应用
B · 诊所与健康 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Bluetooth LE Health Sensors,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Bluetooth LE Health Sensors 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health应能看到 Bluetooth LE Health Sensors 在列表中并显示已连接
用 Bluetooth LE Health Sensors 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Bluetooth LE Health Sensors,或回答中出现 Bluetooth LE Health Sensors 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Bluetooth LE Health Sensors,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Bluetooth LE Health Sensors 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Bluetooth LE Health Sensors 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Bluetooth LE Health Sensors,或回答中出现 Bluetooth LE Health Sensors 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Bluetooth LE Health Sensors,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-ble-health": { "type": "stdio", "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Bluetooth LE Health Sensors 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Bluetooth LE Health Sensors 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Bluetooth LE Health Sensors,或回答中出现 Bluetooth LE Health Sensors 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-healthClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-ble-health": {
"command": "uvx",
"args": [
"labmcp-ble-health"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-ble-health": {
"command": "uvx",
"args": [
"labmcp-ble-health"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-ble-health": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-ble-health"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月20日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-ble-health@0.1.3 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-ble-health)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.3)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:Medplum MCP, Mirobody, Codescene MCP Server, Marrow, WHOOP — MissingMCP
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Securely access and manage FHIR healthcare data stored in Medplum.
Lab results to LOINC codes and UCUM units, symptoms and diagnoses to ICPC-3. Offline, no API key.
An MCP server that provides CodeScene Code Health analysis tools.
Marrow Health: your Apple Health data over MCP, from the free iOS app. Reads, and writes on demand.
WHOOP recovery, strain, sleep and workouts in Claude via official WHOOP OAuth. Free, open source.
| 本项 Bluetooth LE Health Sensors | Medplum MCP | Mirobody | Codescene MCP Server | Marrow | WHOOP — MissingMCP | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 需要安装在电脑上 | 需要安装在电脑上 | 需要安装在电脑上 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 3/3 | 2/3 | 3/3 | 2/4 |
| 许可证 | Apache-2.0 | Apache-2.0 | Apache-2.0 | NOASSERTION | MIT | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent read any Bluetooth Low Energy sensor that implements the standard Bluetooth SIG health profiles: record heart rate with RR intervals and HRV from a chest strap, read SpO2 and pulse rate from an oximeter, and capture blood pressure, body temperature and weight readings from monitors, thermometers and scales, in physiology labs, sports-science studies, sleep/HRV research and lab-operations settings.
[!WARNING]
Research and lab-operations use only. This is not a medical device. It is not intended for diagnosis, monitoring of patients, triage, or any clinical decision-making, and has not been validated or cleared by any regulator. Consumer sensors can be inaccurate; values pass through an AI agent that can misread them. Never use this server's output to make health decisions. Readings of people are personal data: follow your ethics approval and data-protection rules.
| Package | labmcp-ble-health |
| Instruments | Any device implementing the Bluetooth SIG profiles: heart-rate straps/armbands (Heart Rate Service 0x180D), pulse oximeters (Pulse Oximeter Service 0x1822), blood pressure monitors (0x1810), thermometers (Health Thermometer 0x1809), weight scales (Weight Scale 0x181D), plus Battery (0x180F) and Device Information (0x180A) |
| Interfaces | Bluetooth Low Energy, via bleak (Linux/BlueZ, macOS/CoreBluetooth, Windows/WinRT) |
| Protocol | Bluetooth SIG GATT: GATT Specification Supplement, HRS 1.0, PLXS 1.0.1, BLS 1.1.1, HTS 1.0, WSS 1.0.1; IEEE 11073-20601 SFLOAT/FLOAT per the PHD Transcoding White Paper v16 |
| Status | 🧪 simulated: tested against a simulated BLE backend that emits byte-exact GATT packets, not yet verified on hardware. Report a hardware test |
uvx labmcp-ble-health --simulate --check
The simulator provides six devices (addresses 00:00:5E:00:53:01–06, from the IANA documentation range): a combined "health kit" (default) exposing every service, and a separate HR strap, oximeter, BP monitor, thermometer and scale. Pick one with e.g. --simulate --address 00:00:5E:00:53:04.
--address and ask the agent to run scan_devices, or run it with --check after putting the device in advertising mode (wear the strap; press the monitor's Bluetooth/start button). On Linux/Windows the address is the MAC (AA:BB:CC:DD:EE:FF); on macOS it is a CoreBluetooth UUID that is specific to your computer. uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF --check # Linux / Windows
uvx labmcp-ble-health --address 1A2B3C4D-1111-2222-3333-444455556666 --check # macOS
Devices that require bonding (common for BP monitors and scales): add `--option pair=true` on Linux/Windows; macOS shows a system pairing prompt automatically. On Linux choose a non-default adapter with `--option adapter=hci1`; lengthen device discovery with `--option connect_timeout_s=40` (at most 60 s).
macOS: the terminal (or MCP client app) that launches the server needs Bluetooth permission (System Settings › Privacy & Security › Bluetooth). Without it macOS terminates the process as soon as Bluetooth is touched (exit code 134), before any error message can be printed.
Claude Code
claude mcp add hr-strap -- uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "hr-strap": { "command": "uvx", "args": ["labmcp-ble-health", "--address", "AA:BB:CC:DD:EE:FF"] } } }
Every tool is read-only (nothing on the device is changed, no control points are written), so --read-only makes no difference. Run one server entry per device if you use several sensors at once. For other clients, generate the snippet with uvx labmcp config ble-health --address AA:BB:CC:DD:EE:FF --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_device_info | 👁 read | Read the device's identity (manufacturer, model, serial, firmware), the standard health services it exposes and its features. |
read_battery | 👁 read | Read the device's battery level (Battery Service, 0-100 %). |
read_pulse_oximetry | 👁 read | Read SpO2 (%) and pulse rate from a pulse oximeter, averaged over a few seconds or as a single spot-check reading. |
read_temperature | 👁 read | Wait for a thermometer to send a temperature measurement and return it in °C. |
read_weight | 👁 read | Wait for a scale to send a weight measurement (kg), with BMI and height if the scale sends them. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
record_heart_rate | 👁 read | Record heart rate for duration_s: bpm series, RR intervals and time-domain HRV (mean HR, SDNN, RMSSD, pNN50). |
scan_devices | 👁 read | Scan for nearby Bluetooth LE devices: address, name, signal strength and advertised health services. Works without a configured --address. |
wait_for_blood_pressure | 👁 read | Wait for a blood pressure monitor to send a measurement: systolic, diastolic and mean arterial pressure (mmHg) and pulse rate. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
| Limit | Default | Meaning |
|---|---|---|
max_record_duration_s | 600 s | Longest heart-rate recording or continuous-oximetry averaging window an agent may start |
max_wait_s | 300 s | Longest time a tool may wait for a blood pressure, temperature, weight or spot-check reading |
Override at launch: --limit max_record_duration_s=1800. Note that many MCP clients also enforce their own per-tool-call timeout; long recordings may need that raised too (e.g. MCP_TOOL_TIMEOUT in Claude Code).
mode="spot_check"; auto must connect first to find out which mode the device supports).reconnect cancels it too; the cancelled call returns an error.get_command_log) rather than discarding the whole recording; record_heart_rate and read_pulse_oximetry report how many in malformed_packets.record_heart_rate) must be a new .csv file: ~ is expanded, missing folders are created, and an existing file is never overwritten. It is checked before recording starts.other_measurements; the device clock time is in device_timestamp (device local time, often wrong if the clock was never set).null with an explanation (special_values, unavailable_samples). Oximeters typically send NaN for the first seconds while acquiring.unit_reported says what the device sent. Weight resolution is 0.005 kg / 0.01 lb per the Weight Scale spec; 0xFFFF means "measurement unsuccessful" and is returned as weight_kg: null. Energy expended is in kJ (HRS 1.0).| Model | Firmware | Interface | Verified by | Date |
|---|---|---|---|---|
| *none yet: be the first* |