World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Keithley SourceMeter SMUs (2400 series SCPI, 2450 family SCPI, 2600B TSP).
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Keithley SourceMeter SMU。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-keithley-smu.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Keithley SourceMeter SMU,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-keithley-smu": { "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Keithley SourceMeter SMU 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-keithley-smu": {
"command": "uvx",
"args": [
"labmcp-keithley-smu"
]
}
}
}用 Keithley SourceMeter SMU 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Keithley SourceMeter SMU,或回答中出现 Keithley SourceMeter SMU 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Keithley SourceMeter SMU
Keithley SourceMeter SMU 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 Keithley SourceMeter SMU 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Keithley SourceMeter SMU,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smu 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Keithley SourceMeter SMU 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smu应能看到 Keithley SourceMeter SMU 在列表中并显示已连接
用 Keithley SourceMeter SMU 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Keithley SourceMeter SMU,或回答中出现 Keithley SourceMeter SMU 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Keithley SourceMeter SMU,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-keithley-smu": { "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Keithley SourceMeter SMU 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Keithley SourceMeter SMU 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Keithley SourceMeter SMU,或回答中出现 Keithley SourceMeter SMU 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Keithley SourceMeter SMU,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-keithley-smu": { "type": "stdio", "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Keithley SourceMeter SMU 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Keithley SourceMeter SMU 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Keithley SourceMeter SMU,或回答中出现 Keithley SourceMeter SMU 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smuClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-keithley-smu": {
"command": "uvx",
"args": [
"labmcp-keithley-smu"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-keithley-smu": {
"command": "uvx",
"args": [
"labmcp-keithley-smu"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-keithley-smu": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-keithley-smu"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-keithley-smu@0.1.2 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-keithley-smu)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.2)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 Keithley SourceMeter SMU | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent source voltage or current with a compliance limit, measure V and I, and run bounded IV sweeps (linear, log, dual) on Keithley (Tektronix) SourceMeter SMUs. Every sweep ends with the output switched off, even when something goes wrong. The server speaks all three Keithley remote dialects: 2400-series SCPI, 2450-family SCPI, and 2600B TSP.
| Package | labmcp-keithley-smu |
| Instruments | 2400, 2400-LV, 2401, 2410, 2420, 2425, 2430 (DC mode), 2440 · 2450, 2460, 2461, 2470 (SCPI command set) · 2601B, 2602B, 2604B, 2611B, 2612B, 2614B, 2634B, 2635B, 2636B |
| Interfaces | GPIB, USB (USBTMC), Ethernet (VXI-11 / raw socket 5025), RS-232 (2400 series), via VISA or tcp:// |
| Protocol | SCPI: 2400 Series User's Manual 2400S-900-01 Rev. K §18, 2450 Reference Manual 2450-901-01 Rev. D §6. TSP: 2600B Reference Manual 2600BS-901-01 Rev. F §9 |
| Status | 🧪 simulated: tested against wire-level simulators of all three dialects, not yet verified on hardware. Report a hardware test |
uvx labmcp-keithley-smu --simulate --check # 2450 + 1 kΩ resistor
uvx labmcp-keithley-smu --simulate --option dialect=2600 --option sim_dut=diode --check uvx labmcp-keithley-smu --simulate --option dialect=2400 --option sim_resistance_ohm=47 --check
The simulated DUT is a resistor (1 kΩ by default) or a 1N4148-like diode (Shockley equation, I_s = 2.52 nA, n = 1.752, R_s = 0.568 Ω). Compliance clamping behaves as on a real SMU.
SCPI2400 emulation mode it is driven with the 2400 dialect. Above ±21 V the 2450 needs its safety interlock closed.localnode.prompts disabled (the default); prompts would be mixed into replies.uvx labmcp ports (or python -m pyvisa info). GPIB and USBTMC need a VISA library with GPIB support. NI-VISA works everywhere; pyvisa-py covers USBTMC/LAN (and GPIB with gpib-ctypes/linux-gpib). uvx labmcp-keithley-smu --address GPIB0::24::INSTR --check
uvx labmcp-keithley-smu --address USB0::0x05E6::0x2450::04096331::INSTR --check uvx labmcp-keithley-smu --address tcp://192.168.1.50:5025 --check # 2450 / 2600B LAN uvx labmcp-keithley-smu --address TCPIP0::192.168.1.51::inst0::INSTR --option channel=b --check # 2602B, SMU B
The dialect is detected from `*IDN?` (and `*LANG?` on the 2450 family). Force it with `--option dialect=2400|2450|2600`.
Claude Code
claude mcp add smu -- uvx labmcp-keithley-smu --address GPIB0::24::INSTR --limit max_voltage_v=5 --limit max_current_a=0.02
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "smu": { "command": "uvx", "args": ["labmcp-keithley-smu", "--address", "USB0::0x05E6::0x2450::04096331::INSTR", "--limit", "max_voltage_v=5", "--limit", "max_current_a=0.02"] } } }
Add --read-only to allow status and measurements but block configuration, output-on and sweeps (output_off stays available). For other clients, generate the snippet with uvx labmcp config keithley-smu --address --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
configure_source | 🎛 control | Set up the source (function, level, compliance, range, measurement speed) while the output is OFF. Measures V and I with auto-ranging. Refused if the output is on; turn it off first or use set_source_level. Limits are checked before anything is sent. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_device_info | 👁 read | Identify the SMU: manufacturer, model, serial, firmware, command dialect (2400 / 2450 / 2600), channel (2600B) and the model's maximum source voltage and current. |
get_status | 👁 read | Report whether the output is on, the source function (voltage/current), programmed level, compliance limit, whether the source is in compliance, terminals and 2/4-wire sense. |
measure | 👁 read | Take one source-measure reading (voltage, current, V/I, power, compliance flag) of the energised DUT. Does not change any setting; refused if the output is off. |
output_off | 🛑 safety | Switch the SMU output OFF immediately (and abort any IV sweep in progress). Always available, including in read-only mode. |
output_on | ⚠️ hazard | Switch the SMU output ON: the configured voltage or current is applied to the DUT. The programmed level and compliance are read back from the instrument and checked against the safety limits first. Confirm with the user that the DUT is connected and safe to energise. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
run_iv_sweep | ⚠️ hazard | Run a stepped IV sweep: configure the source, switch the output ON, step through the levels measuring V and I at each, then ALWAYS switch the output OFF (also on errors or when output_off is called). Returns the curve (downsampled), compliance flags, a linear fit and optional full CSV (a new file; an existing file is never overwritten). The output must be off beforehand. Limits are checked first. |
set_4wire | 🎛 control | Select 4-wire (remote sense, Kelvin) or 2-wire measurement. 4-wire removes lead resistance for low-resistance DUTs but needs the SENSE leads connected. Refused while the output is on. |
set_source_level | ⚠️ hazard | Change the level of the configured source. If the output is ON the new voltage/current is applied to the DUT immediately. The level and the present compliance are checked against the safety limits first. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
| Limit | Default | Meaning | ||
|---|---|---|---|---|
max_voltage_v | 20 V | Largest \ | voltage\ | an agent may source, or allow as voltage compliance |
max_current_a | 0.1 A | Largest \ | current\ | an agent may source, or allow as current compliance |
max_power_w | 2 W | Largest worst-case power \ | source level × compliance\ | |
max_sweep_points | 501 | Most points in one IV sweep (the return leg of a dual sweep counts) | ||
max_sweep_duration_s | 600 s | Longest estimated sweep duration (points × (delay + 2·NPLC/50 s + 20 ms)) |
The limits are checked before anything is sent: by configure_source and set_source_level, by run_iv_sweep (on the largest \|start\|, \|stop\|), and by output_on, which reads the programmed level and compliance back from the instrument. A level set on the front panel is therefore caught too. Requests beyond the model's own maximum (e.g. 40 V on a 2602B) are also refused. Override at launch: --limit max_voltage_v=60 --limit max_power_w=10. Tighten the defaults for fragile DUTs.
delay_s, take one reading, check compliance. Built-in instrument sweeps and trigger models are not used, so every point shows up in get_command_log. The output is switched off in a try/finally at the end of every sweep. Calling output_off while a sweep runs (even while it is still configuring) sets an abort flag and switches the output off at once; the sweep then stops without switching the output on again and reports aborted: true.max_sweep_duration_s, one sweep can take at most 1740 s (the tool's 30-minute timeout minus a margin): longer estimates are refused, and a sweep that runs slower than estimated stops early with the output off and returns the points measured so far (stop_reason says why)..csv and must not exist yet (an existing file is never overwritten); missing folders are created. It is checked before the output is switched on.null in the sweep curve, counted in overflow_points and left out of the statistics and the fit; measure reports them as an error.:SENS:FUNC:CONC ON, :SENS:FUNC "VOLT","CURR"), read with :READ? (:FORM:ELEM VOLT,CURR,STAT). Compliance comes from status-word bit 3.:READ? "defbuffer1",SOUR,READ returns both. Compliance comes from :SOUR:VOLT:ILIM:TRIP? / :SOUR:CURR:VLIM:TRIP?.print(smuX.measure.iv()) and print(smuX.source.compliance).In compliance, the reported V and I are the measured values, not the programmed level.
measure refuses to run when the output is off.configure_source and set_4wire refuse while the output is on. Use set_source_level (a hazard tool) to change a running source.limitp power compliance are not used.delay_s adds settling time per point.+802 "Not permitted with OUTPUT off", -222, -113; 2600B 1101 "Parameter too big", -285/-286). The exact message wording on real firmware may differ.| Model | Firmware | Interface | Verified by | Date |
|---|
| *none yet: [be the first](https://github.com/K-Dense-AI/lab-inst